openwrt/target/linux/ramips/dts/M2M.dts

113 lines
1.7 KiB
Plaintext

/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "M2M", "ralink,rt5350-soc";
model = "Intenso Memory 2 Move";
chosen {
bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
};
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "Bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "Config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "Factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "m2m:blue:wifi";
gpios = <&gpio0 7 1>;
};
wan {
label = "m2m:green:wan";
gpios = <&gpio0 12 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
power {
label = "power";
gpios = <&gpio0 1 1>;
linux,code = <0x116>;
};
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x28>;
};
esw@10110000 {
ralink,portmap = <0x2f>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0x0>;
};
};