openwrt/target/linux/ramips/dts/mt7620a_dlink_dir-510l.dts

140 lines
2.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "dlink,dir-510l", "ralink,mt7620a-soc";
model = "D-Link DIR-510L";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
chosen {
bootargs = "console=ttyS1,57600";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "dir-510l:green:status";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
status-red {
label = "dir-510l:red:status";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
};
};
&ethernet {
mediatek,portmap = "llllw";
};
&uart {
status = "okay";
};
&gpio0 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "jboot";
reg = <0x0 0x10000>;
read-only;
};
partition@10000 {
label = "recovery";
reg = <0x10000 0x200000>;
read-only;
};
partition@210000 {
compatible = "amit,jimage";
label = "firmware";
reg = <0x210000 0xde0000>;
};
config: partition@ff0000 {
label = "config";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&pcie {
status = "okay";
};
&pcie0 {
mt76x0e@0,0 {
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&config 0xe490>;
mtd-mac-address-increment = <(2)>;
mediatek,mtd-eeprom = <&config 0xe05d>;
};
};
&gsw {
mediatek,port4 = "ephy";
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
};