openwrt/target/linux/brcm63xx/patches-4.19/355-MIPS-BCM63XX-allow-boar...

62 lines
1.8 KiB
Diff

From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Sun, 9 Mar 2014 04:28:14 +0100
Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
flash address
Allow board implementations to force the physmap address.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
---
arch/mips/bcm63xx/dev-flash.c | 19 ++++++++++++++-----
.../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
2 files changed, 16 insertions(+), 5 deletions(-)
--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
},
};
+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
+{
+ mtd_resources[0].start = start;
+ mtd_resources[0].end = end;
+}
+
static int __init bcm63xx_detect_flash_type(void)
{
u32 val;
@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
switch (flash_type) {
case BCM63XX_FLASH_TYPE_PARALLEL:
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
+ if (!mtd_resources[0].start) {
+ /* read base address of boot chip select (0) */
+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ val &= MPI_CSBASE_BASE_MASK;
+
+ mtd_resources[0].start = val;
+ mtd_resources[0].end = 0x1FFFFFFF;
+ }
return platform_device_register(&mtd_dev);
case BCM63XX_FLASH_TYPE_SERIAL:
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
@@ -10,6 +10,8 @@ enum {
void bcm63xx_flash_detect(void);
+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
+
int __init bcm63xx_flash_register(void);
#endif /* __BCM63XX_FLASH_H */