openwrt/target/linux/ath79/dts/qca9531_tplink_archer-d50-v...

196 lines
3.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
compatible = "tplink,archer-d50-v1", "qca,qca9531";
model = "TP-Link Archer D50 v1";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
label-mac-device = &wmac;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
leds {
compatible = "gpio-leds";
wlan2g {
label = "tp-link:white:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "tp-link:white:wlan5g";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
qss {
label = "tp-link:white:qss";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan {
label = "tp-link:white:wan";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan {
label = "tp-link:white:lan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
usb {
label = "tp-link:white:usb";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port0>;
linux,default-trigger = "usbport";
};
internet {
label = "tp-link:white:internet";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
led_system: system {
label = "tp-link:white:system";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
rfkill {
label = "RFKILL button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0x7a0000>;
};
partition@7c0000 {
label = "config";
reg = <0x7c0000 0x010000>;
read-only;
};
romfile: partition@7d0000 {
label = "romfile";
reg = <0x7d0000 0x010000>;
read-only;
};
partition@7e0000 {
label = "rom";
reg = <0x7e0000 0x010000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&eth1 {
mtd-mac-address = <&romfile 0xf100>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&romfile 0xf100>;
mtd-mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&romfile 0xf100>;
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "pci168c,003c";
reg = <0x0000 0 0 0 0>;
};
};
&usb_phy {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port0: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};