openwrt/target/linux/ath79/dts/ar9344_wd_mynet-n750.dts

219 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9344.dtsi"
/ {
model = "Western Digital My Net N750";
compatible = "wd,mynet-n750", "qca,ar9344";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
wifi {
label = "mynet-n750:blue:wireless";
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
internet {
label = "mynet-n750:blue:internet";
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
};
wps {
label = "mynet-n750:blue:wps";
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
led_power: power {
label = "mynet-n750:blue:power";
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wps {
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
gpio_ext_lna0 {
gpio-hog;
gpios = <15 0>;
output-high;
line-name = "mynet-n750:ext:lna0";
};
gpio_ext_lna1 {
gpio-hog;
gpios = <18 0>;
output-high;
line-name = "mynet-n750:ext:lna1";
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "bdcfg";
reg = <0x040000 0x10000>;
read-only;
};
partition@50000 {
label = "devdata";
reg = <0x050000 0x10000>;
read-only;
};
partition@60000 {
label = "devconf";
reg = <0x060000 0x10000>;
read-only;
};
partition@70000 {
compatible = "seama";
label = "firmware";
reg = <0x070000 0xf80000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
#trigger-source-cells = <0>;
hub_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
hub_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
&usb_phy {
status = "okay";
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "pci168c,0033";
reg = <0x0000 0 0 0 0>;
qca,no-eeprom;
};
};
&wmac {
status = "okay";
qca,no-eeprom;
};
&mdio0 {
status = "okay";
phy-mask = <0>;
switch0@1f {
compatible = "qca,ar8327";
reg = <0x1f>;
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x10 0x80000080 /* POWER_ON_STRIP */
0x50 0xc737c737 /* LED_CTRL0 */
0x54 0x00000000 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x0030c300 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};