openwrt/target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts

78 lines
1.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar9342_ubnt_wa.dtsi"
/ {
compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
model = "Ubiquiti Nanostation AC (WA)";
leds {
compatible = "gpio-leds";
rssi0 {
label = "ubnt:blue:rssi0";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "ubnt:blue:rssi1";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "ubnt:blue:rssi2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
rssi3 {
label = "ubnt:blue:rssi3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
&mdio0 {
status = "okay";
phy-mask = <4>;
phy0: ethernet-phy@0 {
phy-mode = "rgmii";
reg = <0>;
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x58 0xffb7ffb7 /* LED_CTRL2 */
0x5c 0x03ffff00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
/* default for ar934x, except for 1000M and 10M */
pll-data = <0x06000000 0x00000101 0x00001313>;
mtd-mac-address = <&eeprom 0x0>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rxd-delay = <2>;
rxdv-delay = <2>;
};
};
&wmac {
status = "okay";
mtd-cal-data = <&eeprom 0x1000>;
};