openwrt/target/linux/ath79/dts/ar7241_netgear_wnr2200.dtsi

208 lines
3.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7241.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_power_amber;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
label-mac-device = &eth1;
};
ath9k-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "rfkill";
linux,code = <KEY_RFKILL>;
gpios = <&ath9k 3 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
wan_green {
label = "netgear:green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan_amber {
label = "netgear:amber:wan";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan1_green {
label = "netgear:green:lan1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan1_amber {
label = "netgear:amber:lan1";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
lan2_green {
label = "netgear:green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan2_amber {
label = "netgear:amber:lan2";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
lan3_green {
label = "netgear:green:lan3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan3_amber {
label = "netgear:amber:lan3";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
lan4_green {
label = "netgear:green:lan4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
lan4_amber {
label = "netgear:amber:lan4";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wps_green {
label = "netgear:green:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
usb_green {
label = "netgear:green:usb";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&hub_port>;
linux,default-trigger = "usbport";
};
};
ath9k-leds {
compatible = "gpio-leds";
led_power_green: power_green {
label = "netgear:green:power";
gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
};
led_power_amber: power_amber {
label = "netgear:amber:power";
gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
wlan_blue {
label = "netgear:blue:wlan";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
compatible = "qca,ar7241-eth", "syscon", "simple-mfd";
mtd-mac-address = <&art 0x6>;
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,002e";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
usb_power {
gpio-hog;
line-name = "netgear:power:usb";
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
};
};
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};