openwrt/target/linux/ath79/dts/ar7161_ubnt_routerstation.dtsi

105 lines
1.4 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7100.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200";
};
aliases {
led-boot = &led_rf;
led-failsafe = &led_rf;
led-running = &led_rf;
led-upgrade = &led_rf;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
led_rf: rf_green {
label = "ubnt:green:rf";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "sw4";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&eth0 {
status = "okay";
};
&eth1 {
status = "okay";
};
&pcie0 {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "ecoscentric,redboot-fis-partitions";
};
};
};
&uart {
status = "okay";
};
&usb_phy {
status = "okay";
};
&usb1 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
usb_ochi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb2 {
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
usb_echi_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};