openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli ad4d3c72dd use updated Annex-A and B firmwares (#5296 ), bump to D7.04.03-R1 SVN-Revision: 17114		2009-08-03 22:21:51 +00:00
docs	…
include	brcm-2.4 is the only non-2.6 target, it's pointless to note the kernelversion in other targets' Target-Name	2009-08-03 11:44:28 +00:00
package	use updated Annex-A and B firmwares (#5296 ), bump to D7.04.03-R1	2009-08-03 22:21:51 +00:00
scripts	…
target	add fixed PHY patches from 2.6.27, refresh patches	2009-08-03 21:32:31 +00:00
toolchain	disable warnings as error in the gdb configuration (#5602 )	2009-07-31 14:24:38 +00:00
tools	revert r17022, this is not the way to do this	2009-07-26 18:13:03 +00:00
.gitignore	…
BSDmakefile	…
Config.in	globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857 )	2009-07-25 21:45:51 +00:00
LICENSE	…
Makefile	…
README	…
feeds.conf.default	…
rules.mk	add -L$(TOOLCHAIN_DIR)/lib to the LIBGCC_S variable, if necessary	2009-08-01 21:29:00 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org