mirror of https://github.com/hak5/openwrt.git
60 lines
1.6 KiB
Diff
60 lines
1.6 KiB
Diff
activate serial driver for ASC1 if "use_asc1=x" is given on kernel commandline
|
|
mux setup for pins is done via late_initcall, when the gpio driver is initialized
|
|
|
|
only implemented for EASY98000, generic version t.b.d.
|
|
--- a/arch/mips/lantiq/falcon/devices.c
|
|
+++ b/arch/mips/lantiq/falcon/devices.c
|
|
@@ -75,6 +75,7 @@ void __init falcon_register_asc(int port
|
|
case 1:
|
|
platform_device_register_simple("ltq_asc", 1,
|
|
falcon_asc1_resources, ARRAY_SIZE(falcon_asc1_resources));
|
|
+ sys1_hw_activate(ACTS_ASC1_ACT);
|
|
break;
|
|
default:
|
|
break;
|
|
--- a/arch/mips/lantiq/falcon/mach-easy98000.c
|
|
+++ b/arch/mips/lantiq/falcon/mach-easy98000.c
|
|
@@ -15,6 +15,7 @@
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_gpio.h>
|
|
#include <linux/spi/eeprom.h>
|
|
+#include <falcon/lantiq_soc.h>
|
|
|
|
#include "../machtypes.h"
|
|
|
|
@@ -206,9 +207,34 @@ static void __init easy98000_spi_gpio_in
|
|
platform_device_register(&easy98000_spi_gpio_device);
|
|
}
|
|
|
|
+static int register_asc1 = 0;
|
|
+static int __init parse_asc1(char *p)
|
|
+{
|
|
+ register_asc1 = 1;
|
|
+ return 0;
|
|
+}
|
|
+__setup("use_asc1", parse_asc1);
|
|
+
|
|
+#define MUXC_SIF_RX_PIN 112
|
|
+#define MUXC_SIF_TX_PIN 113
|
|
+
|
|
+static int __init asc1_mux_setup(void)
|
|
+{
|
|
+ if (register_asc1) {
|
|
+ if (ltq_gpio_request(MUXC_SIF_RX_PIN, 1, 1, 0, "asc1-rx"))
|
|
+ return -1;
|
|
+ if (ltq_gpio_request(MUXC_SIF_TX_PIN, 1, 1, 1, "asc1-tx"))
|
|
+ return -1;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+late_initcall(asc1_mux_setup);
|
|
+
|
|
static void __init easy98000_init_common(void)
|
|
{
|
|
falcon_register_asc(0);
|
|
+ if (register_asc1)
|
|
+ falcon_register_asc(1);
|
|
falcon_register_gpio();
|
|
falcon_register_wdt();
|
|
falcon_register_i2c();
|