openwrt/target/linux/lantiq
John Crispin 76c79f50d7 lantiq: Fixes to athxk EEPROM loading
Use platform data array for storing ath5k EEPROM instead of creating another one.
EEPROM size is 2048 words (2 bytes), so we must read 4096 bytes from flash.
No need to keep the checksum fix now that the EEPROM is loaded completely.
Add a manual eeprom swap for ath9k and keep the endian way.
Use mac-offset property retrieved from the DTS.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 36901
2013-06-10 08:25:12 +00:00
..
ase target: don't build jffs2 nor images by default 2013-06-05 20:58:59 +00:00
base-files lantiq: diag.sh with both red and green power LEDs 2013-06-10 08:25:02 +00:00
dts lantiq: Fixes to athxk EEPROM loading 2013-06-10 08:25:12 +00:00
falcon target: don't build jffs2 nor images by default 2013-06-05 20:58:59 +00:00
files/firmware/lantiq move GPHY FW blobs to non versioned folder 2013-03-14 18:42:21 +00:00
image lantiq: move dts files to thir own folder 2013-04-25 19:03:32 +00:00
patches-3.7 lantiq: Fixes to athxk EEPROM loading 2013-06-10 08:25:12 +00:00
patches-3.8 lantiq: Fixes to athxk EEPROM loading 2013-06-10 08:25:12 +00:00
svip_be target: don't build jffs2 nor images by default 2013-06-05 20:58:59 +00:00
svip_le target: don't build jffs2 nor images by default 2013-06-05 20:58:59 +00:00
xway target: don't build jffs2 nor images by default 2013-06-05 20:58:59 +00:00
Makefile target: don't build jffs2 nor images by default 2013-06-05 20:58:59 +00:00
base-files.mk lantiq: add runtime generation of /etc/config/network 2011-11-15 18:21:00 +00:00
config-3.7 kernel: move CONFIG_MIPS_SEAD3 to generic 2013-05-12 21:41:55 +00:00
config-default lantiq: make kernel_oldconfig 2013-06-10 08:25:07 +00:00
modules.mk fix i2c-lantiq module 2012-12-16 10:03:18 +00:00