openwrt/package/madwifi/Makefile

217 lines
5.6 KiB
Makefile

#
# Copyright (C) 2006-2008 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=madwifi
PKG_REV:=3314
PKG_VERSION:=r$(PKG_REV)
# PKG_BRANCH:=madwifi-dfs
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=svn
PKG_SOURCE_VERSION:=$(PKG_REV)
PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
include $(INCLUDE_DIR)/package.mk
ifneq ($(CONFIG_TARGET_atheros),)
BUS:=AHB
else
ifneq ($(CONFIG_PCI_SUPPORT),)
BUS:=PCI
endif
endif
# XXX: remove this check later when we have PCI support properly detected on all targets
ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
BUS:=
endif
ifeq ($(ARCH),mips)
HAL_TARGET:=mips-be-elf
endif
ifeq ($(ARCH),mipsel)
HAL_TARGET:=mips-le-elf
endif
ifeq ($(ARCH),i386)
HAL_TARGET:=i386-elf
endif
ifeq ($(ARCH),i686)
HAL_TARGET:=i386-elf
endif
ifeq ($(BOARD),ixp4xx)
HAL_TARGET:=xscale-be-elf
endif
ifeq ($(BOARD),iop32x)
HAL_TARGET:=xscale-le-elf
endif
ifeq ($(ARCH),powerpc)
HAL_TARGET:=powerpc-be-elf
endif
ifeq ($(BOARD),storm)
HAL_TARGET:=armv4-le-elf
endif
ifneq ($(CONFIG_TARGET_atheros),)
HAL_TARGET:=wisoc
endif
ifdef CONFIG_MADWIFI_RCA_MINSTREL
RATE_CONTROL:=minstrel
endif
ifdef CONFIG_MADWIFI_RCA_ONOE
RATE_CONTROL:=onoe
endif
ifdef CONFIG_MADWIFI_RCA_AMRR
RATE_CONTROL:=amrr
endif
ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
RATE_CONTROL:=sample
endif
MADWIFI_FILES:= \
$(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
MADWIFI_AUTOLOAD:= \
wlan \
wlan_scan_ap \
wlan_scan_sta \
ath_hal \
ath_rate_$(RATE_CONTROL) \
wlan_acl \
wlan_ccmp \
wlan_tkip \
wlan_wep \
wlan_xauth \
ifeq ($(findstring AHB,$(BUS)),AHB)
MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
MADWIFI_AUTOLOAD+= ath_ahb
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
MADWIFI_AUTOLOAD+= ath_pci
endif
MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig
ifdef CONFIG_MADWIFI_DEBUG
MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
endif
define KernelPackage/madwifi
SUBMENU:=Wireless Drivers
TITLE:=Driver for Atheros wireless chipsets
URL:=http://madwifi.org/
DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
FILES:=$(MADWIFI_FILES)
AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
endef
define KernelPackage/madwifi/description
This package contains a driver for Atheros 802.11a/b/g chipsets.
endef
define KernelPackage/madwifi/config
menu "MadWifi Configuration"
depends on PACKAGE_kmod-madwifi
source "$(SOURCE)/Config.in"
endmenu
endef
MAKE_ARGS:= \
PATH="$(TARGET_PATH)" \
ARCH="$(LINUX_KARCH)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
TARGET="$(HAL_TARGET)" \
TOOLPREFIX="$(KERNEL_CROSS)" \
TOOLPATH="$(KERNEL_CROSS)" \
KERNELPATH="$(LINUX_DIR)" \
LDOPTS="--no-warn-mismatch " \
ATH_RATE="ath_rate/$(RATE_CONTROL)" \
WARNINGS="-Wno-unused" \
$(if $(CONFIG_MADWIFI_DEBUG),,DEBUG="") \
DO_MULTI=1
MAKE_VARS:= \
COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
ifneq ($(HALFILE),)
define Build/Prepare
$(call Build/Prepare/Default)
rm -rf $(PKG_BUILD_DIR)/tmp
mkdir -p $(PKG_BUILD_DIR)/tmp
tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
$(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
rm -rf $(PKG_BUILD_DIR)/tmp
# patch cflags
$(SED) 's, -E[LB],,' \
-e 's, -mapcs-32,,' \
$(PKG_BUILD_DIR)/hal/public/*.inc
$(SED) 's,march=armv4,march=armv5te,' \
$(PKG_BUILD_DIR)/hal/public/xscale*.inc
endef
endif
ifeq ($(findstring AHB,$(BUS)),AHB)
define Build/Compile/ahb
$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
endef
endif
ifeq ($(findstring PCI,$(BUS)),PCI)
define Build/Compile/pci
$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
endef
endif
define Build/Configure
$(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
endef
define Build/Compile
$(call Build/Compile/ahb)
$(call Build/Compile/pci)
endef
define Build/InstallDev
mkdir -p $(1)/usr/include/madwifi
$(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
mkdir -p $(1)/usr/include/madwifi/net80211
$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
endef
define KernelPackage/madwifi/install
$(INSTALL_DIR) $(1)/lib/wifi
$(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,$(MADWIFI_APPLETS)} $(1)/usr/sbin/
endef
$(eval $(call KernelPackage,madwifi))