openwrt/target/linux/cns3xxx/patches-3.3/200-dwc_otg_support.patch

59 lines
1.9 KiB
Diff

--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_UWB) += uwb/
obj-$(CONFIG_USB_OTG_UTILS) += usb/
+obj-$(CONFIG_USB_DWC_OTG) += usb/dwc/
obj-$(CONFIG_USB) += usb/
obj-$(CONFIG_PCI) += usb/
obj-$(CONFIG_USB_GADGET) += usb/
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -134,6 +134,8 @@ source "drivers/usb/musb/Kconfig"
source "drivers/usb/renesas_usbhs/Kconfig"
+source "drivers/usb/dwc/Kconfig"
+
source "drivers/usb/class/Kconfig"
source "drivers/usb/storage/Kconfig"
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -17,7 +17,11 @@ static void urb_destroy(struct kref *kre
if (urb->transfer_flags & URB_FREE_BUFFER)
kfree(urb->transfer_buffer);
-
+ if (urb->aligned_transfer_buffer) {
+ kfree(urb->aligned_transfer_buffer);
+ urb->aligned_transfer_buffer = 0;
+ urb->aligned_transfer_dma = 0;
+ }
kfree(urb);
}
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1234,6 +1234,9 @@ struct urb {
unsigned int transfer_flags; /* (in) URB_SHORT_NOT_OK | ...*/
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
+ void *aligned_transfer_buffer; /* (in) associeated data buffer */
+ dma_addr_t aligned_transfer_dma;/* (in) dma addr for transfer_buffer */
+ u32 aligned_transfer_buffer_length; /* (in) data buffer length */
struct scatterlist *sg; /* (in) scatter gather buffer list */
int num_mapped_sgs; /* (internal) mapped sg entries */
int num_sgs; /* (in) number of entries in the sg list */
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -125,6 +125,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
#
choice
prompt "USB Peripheral Controller"
+ depends on !USB_DWC_OTG
help
A USB device uses a controller to talk to its host.
Systems should have only one such upstream link.