Gabor Juhos ed35253f4c ar71xx: don't use the unknown LED on the ZCN-1523-5 board ... According to #12421, GPIO 1 controls the power output on the unused lines of the LAN2 port. Remove the LED definition in order to prevent possible permanent hardware damage. If someone needs that, the power-out feature can be controlled via the GPIO sysfs interface. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34076		2012-11-04 22:08:54 +00:00
..
base-files	ar71xx: enable sysupgrade for the CAP4200AG board	2012-10-27 08:55:42 +00:00
files	ar71xx: don't use the unknown LED on the ZCN-1523-5 board	2012-11-04 22:08:54 +00:00
generic	ar71xx: add profile and build image for the CAP4200AG	2012-10-27 08:55:40 +00:00
image	ar71xx: include mtd layout in the command line for ZCN-1523H-* boards	2012-11-04 21:12:20 +00:00
nand	ar71xx: register the NAND controller device on the RB2011	2012-09-13 07:26:26 +00:00
patches-3.3	ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards	2012-11-04 20:15:18 +00:00
patches-3.6	ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards	2012-11-04 20:15:18 +00:00
Makefile	bump to 3.3.8	2012-06-05 06:57:51 +00:00
base-files.mk	defconfig: remove network config installed by base-files so defconfig can work	2009-02-26 05:54:46 +00:00
config-3.3	ar71xx: add support for the Senao CAP4200AG board	2012-10-27 08:55:38 +00:00
config-3.6	ar71xx: add initial support for 3.6	2012-10-28 19:52:02 +00:00
modules.mk	ar71xx: package the AR934x NAND driver module	2012-09-13 07:26:23 +00:00