openwrt/target/linux/ramips/dts/rt5350_zyxel_keenetic-start...

114 lines
1.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "rt5350.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "zyxel,keenetic-start", "ralink,rt5350-soc";
model = "ZyXEL Keenetic Start";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
label-mac-device = &ethernet;
};
leds {
compatible = "gpio-leds";
led_status: power {
label = "zyxel:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
internet {
label = "zyxel:green:internet";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
};
&state_default {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x2f>;
mediatek,led_polarity = <0x17>;
};
&wmac {
status = "okay";
ralink,led-polarity = <1>;
ralink,mtd-eeprom = <&factory 0>;
};