openwrt/target/linux/ramips/dts/rt3052_upvel_ur-326n4g.dts

125 lines
2.0 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
model = "UPVEL UR-326N4G";
aliases {
led-boot = &led_wps;
led-failsafe = &led_wps;
led-running = &led_wps;
led-upgrade = &led_wps;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
};
leds {
compatible = "gpio-leds";
3g {
label = "ur-326n4g:green:3g";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
gateway {
label = "ur-326n4g:green:gateway";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
ap {
label = "ur-326n4g:green:ap";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
led_wps: wps {
label = "ur-326n4g:green:wps";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
station {
label = "ur-326n4g:green:station";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset_wps {
label = "reset_wps";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
mode {
label = "mode";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
};
&state_default {
gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
&ethernet {
mtd-mac-address = <&factory 0x4004>;
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&otg {
status = "okay";
};