openwrt/target/linux/ramips/dts/rt3052_planex_mzk-wdpr.dts

92 lines
1.4 KiB
Plaintext

/dts-v1/;
#include "rt3050.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
model = "Planex MZK-WDPR";
chosen {
bootargs = "console=ttyS0,115200";
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@7f0000 {
label = "Data3G";
reg = <0x7f0000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x680000>;
};
};
};
gpio-export {
compatible = "gpio-export";
lcd_ctrl1 {
gpio-export,name = "lcd_ctrl1";
gpio-export,output = <0>;
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
};
};
&state_default {
gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
ralink,function = "gpio";
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&esw {
mediatek,portmap = <0x2f>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&otg {
status = "okay";
};