openwrt/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v...

143 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc";
model = "TP-Link TL-MR3020 v3";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
modec1 {
label = "sw1";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
modec2 {
label = "sw2";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "tl-mr3020-v3:green:power";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wan {
label = "tl-mr3020-v3:green:3g";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
trigger-sources = <&ehci_port1>, <&ohci_port1>;
linux,default-trigger = "usbport";
};
wlan {
label = "tl-mr3020-v3:green:wlan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
label = "tl-mr3020-v3:green:wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
};
lan {
label = "tl-mr3020-v3:green:lan";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x20000 0x7a0000>;
};
partition@7c0000 {
label = "config";
reg = <0x7c0000 0x10000>;
read-only;
};
factory: partition@7d0000 {
label = "factory";
reg = <0x7d0000 0x30000>;
read-only;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&state_default {
gpio {
ralink,group = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an";
ralink,function = "gpio";
};
};
&wmac {
status = "okay";
mtd-mac-address = <&factory 0xf100>;
mediatek,mtd-eeprom = <&factory 0x20000>;
};
&ethernet {
mtd-mac-address = <&factory 0xf100>;
};