openwrt/target/linux/ramips/dts/mt7628an_glinet_vixmini_mic...

105 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
led-boot = &led_power_blue;
led-failsafe = &led_power_blue;
led-running = &led_power_blue;
led-upgrade = &led_power_blue;
label-mac-device = &ethernet;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_power_blue: power {
/* Name is set device-specific */
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
led_wlan_white: wlan {
/* Name is set device-specific */
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&state_default {
gpio {
ralink,group = "wdt", "wled_an", "p1led_an";
ralink,function = "gpio";
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&wmac {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
/*
* Firmware-partition size is model-specific
* due to different flash sizes.
*/
firmware_part: partition@50000 {
compatible = "denx,uimage";
label = "firmware";
};
};
};
};