openwrt/target/linux/ramips/dts/mt7620n_dlink_dwr-116-a1.dts

112 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "mt7620n.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dwr-116-a1", "ralink,mt7620n-soc";
model = "D-Link DWR-116 A1/A2";
aliases {
led-boot = &led_status;
led-failsafe = &led_status;
led-running = &led_status;
led-upgrade = &led_status;
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_status: status {
label = "dwr-116-a1:green:status";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
};
wifi {
label = "dwr-116-a1:green:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "jboot";
reg = <0x0 0x10000>;
read-only;
};
partition@10000 {
compatible = "amit,jimage";
label = "firmware";
reg = <0x10000 0x7e0000>;
};
config: partition@7f0000 {
label = "config";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&state_default {
default {
ralink,group = "i2c", "wled";
ralink,function = "gpio";
};
};
&ethernet {
mediatek,portmap = "llllw";
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
};