openwrt/target/linux/ramips/dts/mt7620a_kimax_u25awf-h1.dts

114 lines
1.6 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/{
compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
model = "Kimax U25AWF-H1";
aliases {
led-boot = &led_wifi;
led-failsafe = &led_wifi;
led-running = &led_wifi;
led-upgrade = &led_wifi;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_wifi: wifi {
label = "u25awf:red:wifi";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
lan {
label = "u25awf:green:lan";
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
};
};
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&state_default {
default {
ralink,group = "uartf", "ephy", "wled";
ralink,function = "gpio";
};
};