openwrt/target/linux/ramips/dts/mt7620a_edimax_ew-747x.dtsi

190 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,mt7620a-soc";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,57600";
};
keys {
compatible = "gpio-keys";
reset_wps {
label = "reset_wps";
gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
switch_high {
label = "switch high";
gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
switch_off {
label = "switch off";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "cimage";
reg = <0x50000 0x20000>;
read-only;
};
partition@70000 {
compatible = "edimax,uimage";
label = "firmware";
reg = <0x00070000 0x00790000>;
};
};
};
};
&state_default {
gpio {
ralink,group = "i2c", "uartf", "nd_sd", "rgmii2";
ralink,function = "gpio";
};
};
&pinctrl {
phy_reset_pins: phy-reset {
gpio {
ralink,group = "spi refclk";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins &phy_reset_pins>;
mediatek,mdio-mode = <1>;
phy-reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
phy-reset-duration = <30>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
status = "disabled";
reg = <0>;
phy-mode = "rgmii";
};
phy1: ethernet-phy@1 {
status = "disabled";
reg = <1>;
phy-mode = "rgmii";
};
phy2: ethernet-phy@2 {
status = "disabled";
reg = <2>;
phy-mode = "rgmii";
};
phy3: ethernet-phy@3 {
status = "disabled";
reg = <3>;
phy-mode = "rgmii";
};
phy4: ethernet-phy@4 {
status = "disabled";
reg = <4>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port5 = "gmac";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};