mirror of https://github.com/hak5/openwrt.git
103 lines
3.4 KiB
Diff
103 lines
3.4 KiB
Diff
From d96cf7e724105dc73f623c2019ab5bc78cef036e Mon Sep 17 00:00:00 2001
|
|
From: Sean Wang <sean.wang@mediatek.com>
|
|
Date: Wed, 20 Dec 2017 17:47:06 +0800
|
|
Subject: [PATCH 175/224] net: mediatek: remove superfluous pin setup for
|
|
MT7622 SoC
|
|
|
|
Remove superfluous pin setup to get out of accessing invalid I/O pin
|
|
registers because the way for pin configuring tends to be different from
|
|
various SoCs and thus it should be better being managed and controlled by
|
|
the pinctrl driver which MT7622 already can support.
|
|
|
|
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 35 +++++++++++++++++------------
|
|
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 +++
|
|
2 files changed, 24 insertions(+), 14 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
|
|
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
|
|
@@ -1977,14 +1977,16 @@ static int mtk_hw_init(struct mtk_eth *e
|
|
}
|
|
regmap_write(eth->ethsys, ETHSYS_SYSCFG0, val);
|
|
|
|
- /* Set GE2 driving and slew rate */
|
|
- regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
|
|
+ if (eth->pctl) {
|
|
+ /* Set GE2 driving and slew rate */
|
|
+ regmap_write(eth->pctl, GPIO_DRV_SEL10, 0xa00);
|
|
|
|
- /* set GE2 TDSEL */
|
|
- regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
|
|
+ /* set GE2 TDSEL */
|
|
+ regmap_write(eth->pctl, GPIO_OD33_CTRL8, 0x5);
|
|
|
|
- /* set GE2 TUNE */
|
|
- regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
|
|
+ /* set GE2 TUNE */
|
|
+ regmap_write(eth->pctl, GPIO_BIAS_CTRL, 0x0);
|
|
+ }
|
|
|
|
/* Set linkdown as the default for each GMAC. Its own MCR would be set
|
|
* up with the more appropriate value when mtk_phy_link_adjust call is
|
|
@@ -2569,11 +2571,13 @@ static int mtk_probe(struct platform_dev
|
|
}
|
|
}
|
|
|
|
- eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
|
|
- "mediatek,pctl");
|
|
- if (IS_ERR(eth->pctl)) {
|
|
- dev_err(&pdev->dev, "no pctl regmap found\n");
|
|
- return PTR_ERR(eth->pctl);
|
|
+ if (eth->soc->required_pctl) {
|
|
+ eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
|
|
+ "mediatek,pctl");
|
|
+ if (IS_ERR(eth->pctl)) {
|
|
+ dev_err(&pdev->dev, "no pctl regmap found\n");
|
|
+ return PTR_ERR(eth->pctl);
|
|
+ }
|
|
}
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
@@ -2699,17 +2703,20 @@ static int mtk_remove(struct platform_de
|
|
|
|
static const struct mtk_soc_data mt2701_data = {
|
|
.caps = MTK_GMAC1_TRGMII,
|
|
- .required_clks = MT7623_CLKS_BITMAP
|
|
+ .required_clks = MT7623_CLKS_BITMAP,
|
|
+ .required_pctl = true,
|
|
};
|
|
|
|
static const struct mtk_soc_data mt7622_data = {
|
|
.caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW,
|
|
- .required_clks = MT7622_CLKS_BITMAP
|
|
+ .required_clks = MT7622_CLKS_BITMAP,
|
|
+ .required_pctl = false,
|
|
};
|
|
|
|
static const struct mtk_soc_data mt7623_data = {
|
|
.caps = MTK_GMAC1_TRGMII,
|
|
- .required_clks = MT7623_CLKS_BITMAP
|
|
+ .required_clks = MT7623_CLKS_BITMAP,
|
|
+ .required_pctl = true,
|
|
};
|
|
|
|
const struct of_device_id of_mtk_match[] = {
|
|
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
|
|
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
|
|
@@ -574,10 +574,13 @@ struct mtk_rx_ring {
|
|
* @caps Flags shown the extra capability for the SoC
|
|
* @required_clks Flags shown the bitmap for required clocks on
|
|
* the target SoC
|
|
+ * @required_pctl A bool value to show whether the SoC requires
|
|
+ * the extra setup for those pins used by GMAC.
|
|
*/
|
|
struct mtk_soc_data {
|
|
u32 caps;
|
|
u32 required_clks;
|
|
+ bool required_pctl;
|
|
};
|
|
|
|
/* currently no SoC has more than 2 macs */
|