hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/malta
History
Aleksander Jan Bajkowski 2115dcbfac malta: enable HighMem on MIPS32 
It allows to use more than 256MB memory on MIPS32.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
 		2020-01-15 22:35:48 +01:00
..
base-files/etc
…
be malta: enable HighMem on MIPS32 2020-01-15 22:35:48 +01:00
be64 malta: Deactivate MIPS O32 and N32 support 2019-05-14 21:50:42 +02:00
image malta: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
le malta: enable HighMem on MIPS32 2020-01-15 22:35:48 +01:00
le64 malta: Deactivate MIPS O32 and N32 support 2019-05-14 21:50:42 +02:00
Makefile treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
README
…
config-4.14 malta: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:16:53 +01:00
config-4.19 malta: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:16:53 +01:00

README 

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.