openwrt/target/linux/bcm63xx/dts/bcm6369-comtrend-wap-5813n.dts

158 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend WAP-5813n";
compatible = "comtrend,wap-5813n", "brcm,bcm6369", "brcm,bcm6368";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wlan {
label = "wlan";
gpios = <&pinctrl 32 1>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&pinctrl 35 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
inet_green {
label = "WAP-5813n:green:inet";
gpios = <&pinctrl 5 0>;
};
power_green {
label = "WAP-5813n:green:power";
gpios = <&pinctrl 22 0>;
default-state = "on";
};
wps_green {
label = "WAP-5813n:green:wps";
gpios = <&pinctrl 23 1>;
};
power_red {
label = "WAP-5813n:red:power";
gpios = <&pinctrl 24 0>;
};
inet_red {
label = "WAP-5813n:red:inet";
gpios = <&pinctrl 31 0>;
};
};
};
&pflash {
status = "ok";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&lsspi {
switch@0 {
compatible = "brcm,bcm53115";
reg = <0>;
spi-max-frequency = <781000>;
lede,alias = "eth0";
ports {
#address-cells = <1>;
#size-cells = <0>;
lan@0 {
reg = <0>;
label = "lan4";
};
lan@1 {
reg = <1>;
label = "lan3";
};
lan@2 {
reg = <2>;
label = "lan2";
};
lan@3 {
reg = <3>;
label = "lan1";
};
wan@4 {
reg = <4>;
label = "wan";
};
cpu@5 {
reg = <5>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
asym-pause;
pause;
};
};
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pci>;
};
&uart0 {
status = "ok";
};