openwrt/target/linux/bcm63xx/dts/bcm6368-comtrend-vr-3026e.dts

93 lines
1.5 KiB
Plaintext

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend VR-3026e";
compatible = "comtrend,vr-3026e", "brcm,bcm6368";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&pinctrl 34 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
dsl_green {
label = "VR-3026e:green:dsl";
gpios = <&pinctrl 2 1>;
};
inet_green {
label = "VR-3026e:green:inet";
gpios = <&pinctrl 5 0>;
};
power_green {
label = "VR-3026e:green:power";
gpios = <&pinctrl 22 0>;
default-state = "on";
};
power_red {
label = "VR-3026e:red:power";
gpios = <&pinctrl 24 0>;
};
inet_red {
label = "VR-3026e:red:inet";
gpios = <&pinctrl 31 0>;
};
};
};
&pflash {
status = "ok";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
&pinctrl_ephy2_led &pinctrl_ephy3_led>;
};
&uart0 {
status = "ok";
};