openwrt/target/linux/bcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts

147 lines
2.2 KiB
Plaintext

/dts-v1/;
#include "bcm6328.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Sercomm AD1018 (SPI flash mod)";
compatible = "sercomm,ad1018-nor", "brcm,bcm6328";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&pinctrl 24 1>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
wifi {
label = "wifi";
gpios = <&pinctrl 25 1>;
linux,code = <KEY_WLAN>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&pinctrl 31 1>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio0", "gpio1";
};
};
&leds {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
&pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
brcm,serial-leds;
brcm,serial-shift-inv;
brcm,serial-dat-low;
inet_red@0 {
reg = <0>;
active-low;
label = "AD1018:red:internet";
};
inet_green@1 {
reg = <1>;
active-low;
label = "AD1018:green:internet";
};
power_green@8 {
reg = <8>;
active-low;
label = "AD1018:green:power";
default-state = "on";
};
adsl_green@10 {
reg = <10>;
active-low;
label = "AD1018:green:adsl";
};
adsl_red@11 {
reg = <11>;
active-low;
label = "AD1018:red:adsl";
};
phone_green@12 {
reg = <12>;
active-low;
label = "AD1018:green:phone";
};
wps_green@13 {
reg = <13>;
active-low;
label = "AD1018:green:wps";
};
wifi_green@14 {
reg = <14>;
active-low;
label = "AD1018:green:wifi";
};
usb_green@15 {
reg = <15>;
active-low;
label = "AD1018:green:usb";
};
ephy0_spd@17 {
reg = <17>;
brcm,hardware-controlled;
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <16666667>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "brcm,bcm963xx-cfe-nor-partitions";
};
};
};
&uart0 {
status = "ok";
};