openwrt/target/linux/bcm63xx/dts/bcm3368.dtsi

134 lines
2.4 KiB
Plaintext

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm3368";
aliases {
pflash = &pflash;
gpio0 = &gpio0;
gpio1 = &gpio1;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &lsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
pflash: nor@1e000000 {
compatible = "cfi-flash";
reg = <0x1e000000 0x2000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
ubus@fff00000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
periph_intc: interrupt-controller@fff8c00c {
compatible = "brcm,bcm6345-l1-intc";
reg = <0xfff8c00c 0x8>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
};
ext_intc0: interrupt-controller@fff8c014 {
compatible = "brcm,bcm6345-ext-intc";
reg = <0xfff8c014 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <25>, <26>, <27>, <28>;
};
gpio1: gpio-controller@fff8c080 {
compatible = "brcm,bcm6345-gpio";
reg = <0xfff8c080 4>, <0xfff8c088 4>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <8>;
};
gpio0: gpio-controller@fff8c084 {
compatible = "brcm,bcm6345-gpio";
reg = <0xfff8c084 4>, <0xfff8c08c 4>;
gpio-controller;
#gpio-cells = <2>;
};
uart0: serial@fff8c100 {
compatible = "brcm,bcm6345-uart";
reg = <0xfff8c100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <2>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
uart1: serial@fff8c120 {
compatible = "brcm,bcm6345-uart";
reg = <0xfff8c120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
lsspi: spi@fff8c800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-spi";
reg = <0xfff8c800 0x70c>;
interrupts = <1>;
/* clocks = <&clkctl 9>; */
};
};
};