openwrt/target/linux/ath79/dts/qca9561_xiaomi_mi-router-4q...

153 lines
2.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0+ OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
compatible = "xiaomi,mi-router-4q", "qca,qca9560";
model = "Xiaomi Mi Router 4Q";
aliases {
led-boot = &led_yellow;
led-failsafe = &led_red;
led-running = &led_blue;
led-upgrade = &led_red;
};
chosen {
bootargs = "console=ttyS0,115200n8";
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
};
wps {
label = "WPS/MI button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_red: led_red {
label = "mi-router-4q:red:led";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
led_yellow: led_yellow {
label = "mi-router-4q:yellow:led";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
led_blue: led_blue {
label = "mi-router-4q:blue:led";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&gpio {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x30000>;
read-only;
};
partition@30000 {
label = "nvram";
reg = <0x030000 0x10000>;
read-only;
};
partition@40000 {
label = "boarddata";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "crash";
reg = <0x50000 0x10000>;
read-only;
};
art: partition@60000 {
label = "art";
reg = <0x60000 0x10000>;
read-only;
};
partition@70000 {
label = "cfg_bak";
reg = <0x70000 0x20000>;
read-only;
};
partition@90000 {
label = "overlay";
reg = <0x90000 0x170000>;
read-only;
};
partition@200000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x200000 0xe00000>;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&art 0x0>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&art 0x6>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
};