openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Gabor Juhos 9bb47dc62d fix the registered machine type of the WNR2000 board SVN-Revision: 13853		2009-01-04 09:32:22 +00:00
docs	hostapd,madwifi: rename agmode option to hwmode. 11a and 11g aren't the only allowed values	2008-12-31 19:09:26 +00:00
include	add MD5 for the kernel 2.6.28	2008-12-25 17:09:30 +00:00
package	clean up the crypto kernel module package and allow some of the crypto modules to be compiled into the kernel (thx to Jose Vasconcellos)	2009-01-04 02:40:12 +00:00
scripts	fix recursive dependencies that might be caused by using conditional dependencies	2009-01-02 02:49:02 +00:00
target	fix the registered machine type of the WNR2000 board	2009-01-04 09:32:22 +00:00
toolchain	enable netlink support	2009-01-03 17:28:58 +00:00
tools	firmware-utils/mkfwimage: add RouterStation support (based on a patch by Jonas <jonas at ubnt.com>)	2008-12-18 13:31:59 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	Adds support for using a local clone of a git tree	2008-10-10 10:07:45 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	remove toolchain build directory as well in 'make dirclean'	2008-12-03 04:22:41 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Switched LuCI-SVN to another server	2008-10-16 14:57:50 +00:00
rules.mk	fix whitespace order in cflags without CONFIG_DEBUG to prevent breakage in some packages' configure step	2008-09-13 17:41:02 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org