hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt/target/linux/brcm47xx/patches-3.10/205-b44-add-phylib-support....

310 lines
8.3 KiB
Diff
Raw Blame History

From 31963d998d2984079dc4f4b36b7df170d85f6d66 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Thu, 3 Oct 2013 22:07:11 +0200
Subject: [PATCH 6/9] b44: add phylib support
Most of the older home routers based on the Broadcom BCM47XX SoC series
are using a MAC that is supported by b44. On most of these routers not
the internal PHY of this MAC core is used, but a switch sometimes on an
external chip or integrated into the same SoC as the Ethernet core.
For this switch a special PHY driver is needed which should not be
integrated into b44 as the same switches are also used by other
Broadcom home networking SoCs which are using different Ethernet MAC
drivers. This was tested with the b53 switch driver which is currently
on its way to mainline.
With this patch we scan the mdio bus when the sprom or nvram says that
the PHY address is 30, if a PHY was found at this address b44 uses it.
This was tested with a BCM4704, BCM4712 and BCM5354.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/net/ethernet/broadcom/Kconfig | 1 +
drivers/net/ethernet/broadcom/b44.c | 181 ++++++++++++++++++++++++++++++++-
drivers/net/ethernet/broadcom/b44.h | 4 +
3 files changed, 183 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
@@ -24,6 +24,7 @@ config B44
select SSB
select NET_CORE
select MII
+ select PHYLIB
---help---
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -6,6 +6,7 @@
* Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org)
* Copyright (C) 2006 Broadcom Corporation.
* Copyright (C) 2007 Michael Buesch <m@bues.ch>
+ * Copyright (C) 2013 Hauke Mehrtens <hauke@hauke-m.de>
*
* Distribute under GPL.
*/
@@ -29,6 +30,7 @@
#include <linux/dma-mapping.h>
#include <linux/ssb/ssb.h>
#include <linux/slab.h>
+#include <linux/phy.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -316,6 +318,23 @@ static void b44_mdio_write_mii(struct ne
__b44_writephy(bp, phy_id, location, val);
}
+static int b44_mdio_read_phylib(struct mii_bus *bus, int phy_id, int location)
+{
+ u32 val;
+ struct b44 *bp = bus->priv;
+ int rc = __b44_readphy(bp, phy_id, location, &val);
+ if (rc)
+ return 0xffffffff;
+ return val;
+}
+
+static int b44_mdio_write_phylib(struct mii_bus *bus, int phy_id, int location,
+ u16 val)
+{
+ struct b44 *bp = bus->priv;
+ return __b44_writephy(bp, phy_id, location, val);
+}
+
static int b44_phy_reset(struct b44 *bp)
{
u32 val;
@@ -1805,6 +1824,11 @@ static int b44_get_settings(struct net_d
{
struct b44 *bp = netdev_priv(dev);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ BUG_ON(!bp->phydev);
+ return phy_ethtool_gset(bp->phydev, cmd);
+ }
+
cmd->supported = (SUPPORTED_Autoneg);
cmd->supported |= (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
@@ -1846,7 +1870,23 @@ static int b44_get_settings(struct net_d
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct b44 *bp = netdev_priv(dev);
- u32 speed = ethtool_cmd_speed(cmd);
+ u32 speed;
+ int ret;
+
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ BUG_ON(!bp->phydev);
+ spin_lock_irq(&bp->lock);
+ if (netif_running(dev))
+ b44_setup_phy(bp);
+
+ ret = phy_ethtool_sset(bp->phydev, cmd);
+
+ spin_unlock_irq(&bp->lock);
+
+ return ret;
+ }
+
+ speed = ethtool_cmd_speed(cmd);
/* We do not support gigabit. */
if (cmd->autoneg == AUTONEG_ENABLE) {
@@ -2076,7 +2116,6 @@ static const struct ethtool_ops b44_etht
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
- struct mii_ioctl_data *data = if_mii(ifr);
struct b44 *bp = netdev_priv(dev);
int err = -EINVAL;
@@ -2084,7 +2123,12 @@ static int b44_ioctl(struct net_device *
goto out;
spin_lock_irq(&bp->lock);
- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ BUG_ON(bp->phydev);
+ err = phy_mii_ioctl(bp->phydev, ifr, cmd);
+ } else {
+ err = generic_mii_ioctl(&bp->mii_if, if_mii(ifr), cmd, NULL);
+ }
spin_unlock_irq(&bp->lock);
out:
return err;
@@ -2146,6 +2190,124 @@ static const struct net_device_ops b44_n
#endif
};
+static void b44_adjust_link(struct net_device *dev)
+{
+ struct b44 *bp = netdev_priv(dev);
+ struct phy_device *phydev = bp->phydev;
+ bool status_changed = 0;
+
+ BUG_ON(!phydev);
+
+ if (bp->old_link != phydev->link) {
+ status_changed = 1;
+ bp->old_link = phydev->link;
+ }
+
+ /* reflect duplex change */
+ if (phydev->link && (bp->old_duplex != phydev->duplex)) {
+ status_changed = 1;
+ bp->old_duplex = phydev->duplex;
+ }
+
+ if (status_changed)
+ phy_print_status(phydev);
+}
+
+static int b44_register_phy_one(struct b44 *bp)
+{
+ struct mii_bus *mii_bus;
+ struct ssb_device *sdev = bp->sdev;
+ struct phy_device *phydev;
+ int err;
+
+ mii_bus = mdiobus_alloc();
+ if (!mii_bus) {
+ dev_err(sdev->dev, "mdiobus_alloc() failed\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ mii_bus->priv = bp;
+ mii_bus->read = b44_mdio_read_phylib;
+ mii_bus->write = b44_mdio_write_phylib;
+ mii_bus->name = "b44_eth_mii";
+ mii_bus->parent = sdev->dev;
+ mii_bus->phy_mask = ~(1 << bp->phy_addr);
+ snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%x", instance);
+ mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!mii_bus->irq) {
+ dev_err(sdev->dev, "mii_bus irq allocation failed\n");
+ err = -ENOMEM;
+ goto err_out_mdiobus;
+ }
+
+ memset(mii_bus->irq, PHY_POLL, sizeof(int) * PHY_MAX_ADDR);
+
+ bp->mii_bus = mii_bus;
+
+ err = mdiobus_register(mii_bus);
+ if (err) {
+ dev_err(sdev->dev, "failed to register MII bus\n");
+ goto err_out_mdiobus_irq;
+ }
+
+ phydev = bp->mii_bus->phy_map[bp->phy_addr];
+ if (!phydev) {
+ dev_err(sdev->dev, "could not find PHY at %i\n", bp->phy_addr);
+ err = -ENODEV;
+ goto err_out_mdiobus_unregister;
+ }
+
+ err = phy_connect_direct(bp->dev, phydev, &b44_adjust_link,
+ PHY_INTERFACE_MODE_MII);
+ if (err < 0) {
+ dev_err(sdev->dev, "could not attach PHY at %i\n",
+ bp->phy_addr);
+ goto err_out_mdiobus_unregister;
+ }
+
+ /* mask with MAC supported features */
+ phydev->supported &= (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_MII);
+ phydev->advertising = phydev->supported;
+
+ bp->phydev = phydev;
+ bp->old_link = 0;
+ bp->old_duplex = -1;
+ bp->phy_addr = phydev->addr;
+
+ dev_info(sdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
+
+ return 0;
+
+err_out_mdiobus_unregister:
+ mdiobus_unregister(mii_bus);
+
+err_out_mdiobus_irq:
+ kfree(mii_bus->irq);
+
+err_out_mdiobus:
+ mdiobus_free(mii_bus);
+
+err_out:
+ return err;
+}
+
+static void b44_unregister_phy_one(struct b44 *bp)
+{
+ struct mii_bus *mii_bus = bp->mii_bus;
+
+ phy_disconnect(bp->phydev);
+ mdiobus_unregister(mii_bus);
+ kfree(mii_bus->irq);
+ mdiobus_free(mii_bus);
+}
+
static int b44_init_one(struct ssb_device *sdev,
const struct ssb_device_id *ent)
{
@@ -2246,10 +2408,20 @@ static int b44_init_one(struct ssb_devic
if (b44_phy_reset(bp) < 0)
bp->phy_addr = B44_PHY_ADDR_NO_LOACL_PHY;
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
+ err = b44_register_phy_one(bp);
+ if (err) {
+ dev_err(sdev->dev, "Cannot register PHY, aborting\n");
+ goto err_out_unregister_netdev;
+ }
+ }
+
netdev_info(dev, "%s %pM\n", DRV_DESCRIPTION, dev->dev_addr);
return 0;
+err_out_unregister_netdev:
+ unregister_netdev(dev);
err_out_powerdown:
ssb_bus_may_powerdown(sdev->bus);
@@ -2263,8 +2435,11 @@ out:
static void b44_remove_one(struct ssb_device *sdev)
{
struct net_device *dev = ssb_get_drvdata(sdev);
+ struct b44 *bp = netdev_priv(dev);
unregister_netdev(dev);
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
+ b44_unregister_phy_one(bp);
ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
--- a/drivers/net/ethernet/broadcom/b44.h
+++ b/drivers/net/ethernet/broadcom/b44.h
@@ -397,6 +397,10 @@ struct b44 {
u32 tx_pending;
u8 phy_addr;
u8 force_copybreak;
+ struct phy_device *phydev;
+ struct mii_bus *mii_bus;
+ int old_link;
+ int old_duplex;
struct mii_if_info mii_if;
};
Reference in New Issue View Git Blame Copy Permalink