This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
 
 
 
 
 
 
Go to file
Gabor Juhos 97e4ddd012 ar71xx: add support for TP-Link TL-MR11U
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
2012-01-31 18:37:01 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include kernel: update linux 3.2 to 3.2.2 2012-01-31 09:44:00 +00:00
package fix wprobe build for arm on 3.2 2012-01-30 14:02:13 +00:00
scripts patch-specs.sh: gcc 3.4.6 has an additional "(OpenWrt-2.0)" after the version tag, cope with that 2012-01-29 20:19:06 +00:00
target ar71xx: add support for TP-Link TL-MR11U 2012-01-31 18:37:01 +00:00
toolchain eglibc 2.14 needs our eglibc patchset as well 2012-01-21 19:39:37 +00:00
tools autoconf: another relocatability fix for autom4te, substitute hardcoded prefix with $STAGING_DIR when reading autom4te.cfg 2012-01-28 04:42:15 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in if CONFIG_BUILD_NLS is selected, compile uClibc with locale support 2012-01-01 15:11:11 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
rules.mk rules.mk: filter "." and "./" entries from $PATH, prevents toolchain build issues and likely other problems 2012-01-29 23:34:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org