openwrt/target/linux/ar71xx/patches-3.8/620-MIPS-ath79-add-Archer-C...

40 lines
1.4 KiB
Diff

--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -495,6 +495,16 @@ config ATH79_MACH_EAP7660D
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+config ATH79_MACH_ARCHER_C7
+ bool "TP-LINK Archer C7 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_SPI
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_MR11U
bool "TP-LINK TL-MR11U/TL-MR3040 support"
select SOC_AR933X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -31,6 +31,7 @@ enum ath79_mach_type {
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
ATH79_MACH_AP96, /* Atheros AP96 */
+ ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP136) += mach-
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o