mirror of https://github.com/hak5/openwrt.git
2da6c85c80
If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that ATM should be used for ADSL and PTM for VDSL. xfer_mode and line_mode can be set to fixed value independantly from each other. The syntax for the tc_layer argument of vdsl_cpe_control is as follow: -T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL> where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be: 1=64/65-octet encapsulation supported 2=64/65-octet encapsulation with pre-emption 3=64/65-octet encapsulation with short packets Default: In case of no '-T' option is given, ADSL will be configured in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1 The '-M' argument of dsl_cpe_control defines the initial DSL mode (NextMode) for ADSL/VDSL multimode handling. Possible Values: 0=API-default, 1=ADSL, 2=VDSL Default: In case of no '-M' option is given, '0' (API-default) will be selected. Signed-off-by: Martin Schiller <ms@dev.tdt.de> |
||
|---|---|---|
| .. | ||
| config | ||
| ipv6 | ||
| services | ||
| utils | ||