hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
8,168 Commits
5 Branches
29 Tags
202 MiB
C 65.7%
Makefile 15.8%
Shell 7.2%
Roff 5.7%
Perl 1.9%
Other 3.6%
 
 
 
 
 
 
Go to file
Felix Fietkau 9621d872ca (3/6) bcm57xx: preinit 
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11468
 		2008-06-15 11:10:13 +00:00
docs fix a small dep bug in the docs/ dir 2008-06-09 15:38:23 +00:00
include remove accidentally committed swap file 2008-06-13 15:29:07 +00:00
package (1/6) bcm57xx: init from diag 2008-06-15 11:09:27 +00:00
scripts use the european kernel.org mirror too 2008-06-12 14:48:32 +00:00
target (3/6) bcm57xx: preinit 2008-06-15 11:10:13 +00:00
toolchain finally fixes etrax toolchain problems, thanks nbd 2008-06-06 20:12:05 +00:00
tools Added lua (lua host bytecode-compiler) to tools/ 2008-05-30 18:38:14 +00:00
.gitignore update svn:ignore and .gitignore 2008-06-06 19:04:01 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine 2008-06-09 15:38:45 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf Switched xwrt url in feeds.conf (berlios http falls over occasionally) 2008-03-02 22:07:46 +00:00
rules.mk adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org