mirror of https://github.com/hak5/openwrt.git
184 lines
5.8 KiB
Diff
184 lines
5.8 KiB
Diff
From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001
|
|
From: Ajay Kishore <akisho@codeaurora.org>
|
|
Date: Tue, 24 Jan 2017 14:14:16 +0530
|
|
Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps
|
|
|
|
For IPQ806x targets, TZ protects the registers that are used to
|
|
configure the routing of interrupts to a target processor.
|
|
To resolve this, this patch uses scm call to route GPIO interrupts
|
|
to application processor. Also the scm call interface is changed.
|
|
|
|
Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce
|
|
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
|
|
---
|
|
drivers/firmware/qcom_scm-32.c | 17 +++++++++++++++++
|
|
drivers/firmware/qcom_scm-64.c | 9 +++++++++
|
|
drivers/firmware/qcom_scm.c | 13 +++++++++++++
|
|
drivers/firmware/qcom_scm.h | 8 ++++++++
|
|
drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------
|
|
include/linux/qcom_scm.h | 3 ++-
|
|
6 files changed, 77 insertions(+), 7 deletions(-)
|
|
|
|
--- a/drivers/firmware/qcom_scm-32.c
|
|
+++ b/drivers/firmware/qcom_scm-32.c
|
|
@@ -561,6 +561,24 @@ int __qcom_scm_pas_mss_reset(struct devi
|
|
return ret ? : le32_to_cpu(out);
|
|
}
|
|
|
|
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
|
|
+{
|
|
+ s32 ret;
|
|
+
|
|
+ ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
|
|
+{
|
|
+ s32 ret;
|
|
+
|
|
+ ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2);
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
|
|
{
|
|
struct {
|
|
--- a/drivers/firmware/qcom_scm-64.c
|
|
+++ b/drivers/firmware/qcom_scm-64.c
|
|
@@ -366,6 +366,16 @@ int __qcom_scm_pas_mss_reset(struct devi
|
|
return ret ? : res.a1;
|
|
}
|
|
|
|
+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
|
|
+{
|
|
+ return -ENOTSUPP;
|
|
+}
|
|
+
|
|
+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
|
|
+{
|
|
+ return -ENOTSUPP;
|
|
+}
|
|
+
|
|
int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
|
|
{
|
|
struct qcom_scm_desc desc = {0};
|
|
--- a/drivers/firmware/qcom_scm.c
|
|
+++ b/drivers/firmware/qcom_scm.c
|
|
@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
|
|
return platform_driver_register(&qcom_scm_driver);
|
|
}
|
|
subsys_initcall(qcom_scm_init);
|
|
+
|
|
+int qcom_scm_pinmux_read(u32 arg1)
|
|
+{
|
|
+ return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1);
|
|
+}
|
|
+EXPORT_SYMBOL(qcom_scm_pinmux_read);
|
|
+
|
|
+int qcom_scm_pinmux_write(u32 arg1, u32 arg2)
|
|
+{
|
|
+ return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE,
|
|
+ arg1, arg2);
|
|
+}
|
|
+EXPORT_SYMBOL(qcom_scm_pinmux_write);
|
|
--- a/drivers/firmware/qcom_scm.h
|
|
+++ b/drivers/firmware/qcom_scm.h
|
|
@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese
|
|
extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
|
|
extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
|
|
|
|
+#define SCM_IO_READ 1
|
|
+#define SCM_IO_WRITE 2
|
|
+#define SCM_SVC_IO_ACCESS 0x5
|
|
+
|
|
+s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1);
|
|
+s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2);
|
|
+
|
|
/* common error codes */
|
|
#define QCOM_SCM_V2_EBUSY -12
|
|
#define QCOM_SCM_ENOMEM -5
|
|
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
|
|
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
|
|
@@ -30,7 +30,8 @@
|
|
#include <linux/reboot.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/log2.h>
|
|
-
|
|
+#include <linux/qcom_scm.h>
|
|
+#include <linux/io.h>
|
|
#include "../core.h"
|
|
#include "../pinconf.h"
|
|
#include "pinctrl-msm.h"
|
|
@@ -646,6 +647,9 @@ static void msm_gpio_irq_ack(struct irq_
|
|
const struct msm_pingroup *g;
|
|
unsigned long flags;
|
|
u32 val;
|
|
+ u32 addr;
|
|
+ int ret;
|
|
+ const __be32 *reg;
|
|
|
|
g = &pctrl->soc->groups[d->hwirq];
|
|
|
|
@@ -684,11 +688,30 @@ static int msm_gpio_irq_set_type(struct
|
|
else
|
|
clear_bit(d->hwirq, pctrl->dual_edge_irqs);
|
|
|
|
+ int ret = of_device_is_compatible(pctrl->dev->of_node,
|
|
+ "qcom,ipq8064-pinctrl");
|
|
/* Route interrupts to application cpu */
|
|
- val = readl(pctrl->regs + g->intr_target_reg);
|
|
- val &= ~(7 << g->intr_target_bit);
|
|
- val |= g->intr_target_kpss_val << g->intr_target_bit;
|
|
- writel(val, pctrl->regs + g->intr_target_reg);
|
|
+ if (!ret) {
|
|
+ val = readl(pctrl->regs + g->intr_target_reg);
|
|
+ val &= ~(7 << g->intr_target_bit);
|
|
+ val |= g->intr_target_kpss_val << g->intr_target_bit;
|
|
+ writel(val, pctrl->regs + g->intr_target_reg);
|
|
+ } else {
|
|
+ const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL);
|
|
+ if (reg) {
|
|
+ u32 addr = be32_to_cpup(reg) + g->intr_target_reg;
|
|
+ val = qcom_scm_pinmux_read(addr);
|
|
+ __iormb();
|
|
+
|
|
+ val &= ~(7 << g->intr_target_bit);
|
|
+ val |= g->intr_target_kpss_val << g->intr_target_bit;
|
|
+
|
|
+ __iowmb();
|
|
+ ret = qcom_scm_pinmux_write(addr, val);
|
|
+ if (ret)
|
|
+ pr_err("\n Routing interrupts to Apps proc failed");
|
|
+ }
|
|
+ }
|
|
|
|
/* Update configuration for gpio.
|
|
* RAW_STATUS_EN is left on for all gpio irqs. Due to the
|
|
@@ -975,4 +998,3 @@ int msm_pinctrl_remove(struct platform_d
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(msm_pinctrl_remove);
|
|
-
|
|
--- a/include/linux/qcom_scm.h
|
|
+++ b/include/linux/qcom_scm.h
|
|
@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32
|
|
extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
|
|
extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
|
|
extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
|
|
+extern s32 qcom_scm_pinmux_read(u32 arg1);
|
|
+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2);
|
|
#else
|
|
|
|
#include <linux/errno.h>
|
|
@@ -76,5 +78,7 @@ qcom_scm_set_remote_state(u32 state,u32
|
|
static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
|
|
static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
|
|
static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
|
|
+extern s32 qcom_scm_pinmux_read(u32 arg1) { return -ENODEV; }
|
|
+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2) { return -ENODEV; }
|
|
#endif
|
|
#endif
|