mirror of https://github.com/hak5/openwrt.git
235 lines
6.5 KiB
C
235 lines
6.5 KiB
C
/*
|
|
* Hardware-specific External Interface I/O core definitions
|
|
* for the BCM47xx family of SiliconBackplane-based chips.
|
|
*
|
|
* The External Interface core supports a total of three external chip selects
|
|
* supporting external interfaces. One of the external chip selects is
|
|
* used for Flash, one is used for PCMCIA, and the other may be
|
|
* programmed to support either a synchronous interface or an
|
|
* asynchronous interface. The asynchronous interface can be used to
|
|
* support external devices such as UARTs and the BCM2019 Bluetooth
|
|
* baseband processor.
|
|
* The external interface core also contains 2 on-chip 16550 UARTs, clock
|
|
* frequency control, a watchdog interrupt timer, and a GPIO interface.
|
|
*
|
|
* Copyright 2006, Broadcom Corporation
|
|
* All Rights Reserved.
|
|
*
|
|
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
|
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
|
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
|
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
|
*
|
|
* $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
|
|
*/
|
|
|
|
#ifndef _SBEXTIF_H
|
|
#define _SBEXTIF_H
|
|
|
|
/* external interface address space */
|
|
#define EXTIF_PCMCIA_MEMBASE(x) (x)
|
|
#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
|
|
#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
|
|
#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
|
|
#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
|
|
|
|
/* cpp contortions to concatenate w/arg prescan */
|
|
#ifndef PAD
|
|
#define _PADLINE(line) pad ## line
|
|
#define _XSTR(line) _PADLINE(line)
|
|
#define PAD _XSTR(__LINE__)
|
|
#endif /* PAD */
|
|
|
|
/*
|
|
* The multiple instances of output and output enable registers
|
|
* are present to allow driver software for multiple cores to control
|
|
* gpio outputs without needing to share a single register pair.
|
|
*/
|
|
struct gpiouser {
|
|
uint32 out;
|
|
uint32 outen;
|
|
};
|
|
#define NGPIOUSER 5
|
|
|
|
typedef volatile struct {
|
|
uint32 corecontrol;
|
|
uint32 extstatus;
|
|
uint32 PAD[2];
|
|
|
|
/* pcmcia control registers */
|
|
uint32 pcmcia_config;
|
|
uint32 pcmcia_memwait;
|
|
uint32 pcmcia_attrwait;
|
|
uint32 pcmcia_iowait;
|
|
|
|
/* programmable interface control registers */
|
|
uint32 prog_config;
|
|
uint32 prog_waitcount;
|
|
|
|
/* flash control registers */
|
|
uint32 flash_config;
|
|
uint32 flash_waitcount;
|
|
uint32 PAD[4];
|
|
|
|
uint32 watchdog;
|
|
|
|
/* clock control */
|
|
uint32 clockcontrol_n;
|
|
uint32 clockcontrol_sb;
|
|
uint32 clockcontrol_pci;
|
|
uint32 clockcontrol_mii;
|
|
uint32 PAD[3];
|
|
|
|
/* gpio */
|
|
uint32 gpioin;
|
|
struct gpiouser gpio[NGPIOUSER];
|
|
uint32 PAD;
|
|
uint32 ejtagouten;
|
|
uint32 gpiointpolarity;
|
|
uint32 gpiointmask;
|
|
uint32 PAD[153];
|
|
|
|
uint8 uartdata;
|
|
uint8 PAD[3];
|
|
uint8 uartimer;
|
|
uint8 PAD[3];
|
|
uint8 uartfcr;
|
|
uint8 PAD[3];
|
|
uint8 uartlcr;
|
|
uint8 PAD[3];
|
|
uint8 uartmcr;
|
|
uint8 PAD[3];
|
|
uint8 uartlsr;
|
|
uint8 PAD[3];
|
|
uint8 uartmsr;
|
|
uint8 PAD[3];
|
|
uint8 uartscratch;
|
|
uint8 PAD[3];
|
|
} extifregs_t;
|
|
|
|
/* corecontrol */
|
|
#define CC_UE (1 << 0) /* uart enable */
|
|
|
|
/* extstatus */
|
|
#define ES_EM (1 << 0) /* endian mode (ro) */
|
|
#define ES_EI (1 << 1) /* external interrupt pin (ro) */
|
|
#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */
|
|
|
|
/* gpio bit mask */
|
|
#define GPIO_BIT0 (1 << 0)
|
|
#define GPIO_BIT1 (1 << 1)
|
|
#define GPIO_BIT2 (1 << 2)
|
|
#define GPIO_BIT3 (1 << 3)
|
|
#define GPIO_BIT4 (1 << 4)
|
|
#define GPIO_BIT5 (1 << 5)
|
|
#define GPIO_BIT6 (1 << 6)
|
|
#define GPIO_BIT7 (1 << 7)
|
|
|
|
|
|
/* pcmcia/prog/flash_config */
|
|
#define CF_EN (1 << 0) /* enable */
|
|
#define CF_EM_MASK 0xe /* mode */
|
|
#define CF_EM_SHIFT 1
|
|
#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */
|
|
#define CF_EM_SYNC 0x2 /* synchronous mode */
|
|
#define CF_EM_PCMCIA 0x4 /* pcmcia mode */
|
|
#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */
|
|
#define CF_BS (1 << 5) /* byteswap */
|
|
#define CF_CD_MASK 0xc0 /* clock divider */
|
|
#define CF_CD_SHIFT 6
|
|
#define CF_CD_DIV2 0x0 /* backplane/2 */
|
|
#define CF_CD_DIV3 0x40 /* backplane/3 */
|
|
#define CF_CD_DIV4 0x80 /* backplane/4 */
|
|
#define CF_CE (1 << 8) /* clock enable */
|
|
#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */
|
|
|
|
/* pcmcia_memwait */
|
|
#define PM_W0_MASK 0x3f /* waitcount0 */
|
|
#define PM_W1_MASK 0x1f00 /* waitcount1 */
|
|
#define PM_W1_SHIFT 8
|
|
#define PM_W2_MASK 0x1f0000 /* waitcount2 */
|
|
#define PM_W2_SHIFT 16
|
|
#define PM_W3_MASK 0x1f000000 /* waitcount3 */
|
|
#define PM_W3_SHIFT 24
|
|
|
|
/* pcmcia_attrwait */
|
|
#define PA_W0_MASK 0x3f /* waitcount0 */
|
|
#define PA_W1_MASK 0x1f00 /* waitcount1 */
|
|
#define PA_W1_SHIFT 8
|
|
#define PA_W2_MASK 0x1f0000 /* waitcount2 */
|
|
#define PA_W2_SHIFT 16
|
|
#define PA_W3_MASK 0x1f000000 /* waitcount3 */
|
|
#define PA_W3_SHIFT 24
|
|
|
|
/* prog_waitcount */
|
|
#define PW_W0_MASK 0x0000001f /* waitcount0 */
|
|
#define PW_W1_MASK 0x00001f00 /* waitcount1 */
|
|
#define PW_W1_SHIFT 8
|
|
#define PW_W2_MASK 0x001f0000 /* waitcount2 */
|
|
#define PW_W2_SHIFT 16
|
|
#define PW_W3_MASK 0x1f000000 /* waitcount3 */
|
|
#define PW_W3_SHIFT 24
|
|
|
|
#define PW_W0 0x0000000c
|
|
#define PW_W1 0x00000a00
|
|
#define PW_W2 0x00020000
|
|
#define PW_W3 0x01000000
|
|
|
|
/* flash_waitcount */
|
|
#define FW_W0_MASK 0x1f /* waitcount0 */
|
|
#define FW_W1_MASK 0x1f00 /* waitcount1 */
|
|
#define FW_W1_SHIFT 8
|
|
#define FW_W2_MASK 0x1f0000 /* waitcount2 */
|
|
#define FW_W2_SHIFT 16
|
|
#define FW_W3_MASK 0x1f000000 /* waitcount3 */
|
|
#define FW_W3_SHIFT 24
|
|
|
|
/* watchdog */
|
|
#define WATCHDOG_CLOCK 48000000 /* Hz */
|
|
|
|
/* clockcontrol_n */
|
|
#define CN_N1_MASK 0x3f /* n1 control */
|
|
#define CN_N2_MASK 0x3f00 /* n2 control */
|
|
#define CN_N2_SHIFT 8
|
|
|
|
/* clockcontrol_sb/pci/mii */
|
|
#define CC_M1_MASK 0x3f /* m1 control */
|
|
#define CC_M2_MASK 0x3f00 /* m2 control */
|
|
#define CC_M2_SHIFT 8
|
|
#define CC_M3_MASK 0x3f0000 /* m3 control */
|
|
#define CC_M3_SHIFT 16
|
|
#define CC_MC_MASK 0x1f000000 /* mux control */
|
|
#define CC_MC_SHIFT 24
|
|
|
|
/* Clock control default values */
|
|
#define CC_DEF_N 0x0009 /* Default values for bcm4710 */
|
|
#define CC_DEF_100 0x04020011
|
|
#define CC_DEF_33 0x11030011
|
|
#define CC_DEF_25 0x11050011
|
|
|
|
/* Clock control values for 125Mhz */
|
|
#define CC_125_N 0x0802
|
|
#define CC_125_M 0x04020009
|
|
#define CC_125_M25 0x11090009
|
|
#define CC_125_M33 0x11090005
|
|
|
|
/* Clock control magic field values */
|
|
#define CC_F6_2 0x02 /* A factor of 2 in */
|
|
#define CC_F6_3 0x03 /* 6-bit fields like */
|
|
#define CC_F6_4 0x05 /* N1, M1 or M3 */
|
|
#define CC_F6_5 0x09
|
|
#define CC_F6_6 0x11
|
|
#define CC_F6_7 0x21
|
|
|
|
#define CC_F5_BIAS 5 /* 5-bit fields get this added */
|
|
|
|
#define CC_MC_BYPASS 0x08
|
|
#define CC_MC_M1 0x04
|
|
#define CC_MC_M1M2 0x02
|
|
#define CC_MC_M1M2M3 0x01
|
|
#define CC_MC_M1M3 0x11
|
|
|
|
#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */
|
|
|
|
#endif /* _SBEXTIF_H */
|