openwrt/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/mipsinc.h

544 lines
14 KiB
C

/*
* HND Run Time Environment for standalone MIPS programs.
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id$
*/
#ifndef _MISPINC_H
#define _MISPINC_H
/* MIPS defines */
#ifdef _LANGUAGE_ASSEMBLY
/*
* Symbolic register names for 32 bit ABI
*/
#define zero $0 /* wired zero */
#define AT $1 /* assembler temp - uppercase because of ".set at" */
#define v0 $2 /* return value */
#define v1 $3
#define a0 $4 /* argument registers */
#define a1 $5
#define a2 $6
#define a3 $7
#define t0 $8 /* caller saved */
#define t1 $9
#define t2 $10
#define t3 $11
#define t4 $12
#define t5 $13
#define t6 $14
#define t7 $15
#define s0 $16 /* callee saved */
#define s1 $17
#define s2 $18
#define s3 $19
#define s4 $20
#define s5 $21
#define s6 $22
#define s7 $23
#define t8 $24 /* caller saved */
#define t9 $25
#define jp $25 /* PIC jump register */
#define k0 $26 /* kernel scratch */
#define k1 $27
#define gp $28 /* global pointer */
#define sp $29 /* stack pointer */
#define fp $30 /* frame pointer */
#define s8 $30 /* same like fp! */
#define ra $31 /* return address */
/* CP0 Registers */
#define C0_INX $0
#define C0_RAND $1
#define C0_TLBLO0 $2
#define C0_TLBLO C0_TLBLO0
#define C0_TLBLO1 $3
#define C0_CTEXT $4
#define C0_PGMASK $5
#define C0_WIRED $6
#define C0_INFO $7
#define C0_BADVADDR $8
#define C0_COUNT $9
#define C0_TLBHI $10
#define C0_COMPARE $11
#define C0_SR $12
#define C0_STATUS C0_SR
#define C0_CAUSE $13
#define C0_EPC $14
#define C0_PRID $15
#define C0_CONFIG $16
#define C0_LLADDR $17
#define C0_WATCHLO $18
#define C0_WATCHHI $19
#define C0_XCTEXT $20
#define C0_DIAGNOSTIC $22
#define C0_BROADCOM C0_DIAGNOSTIC
#define C0_PERFORMANCE $25
#define C0_ECC $26
#define C0_CACHEERR $27
#define C0_TAGLO $28
#define C0_TAGHI $29
#define C0_ERREPC $30
#define C0_DESAVE $31
/*
* LEAF - declare leaf routine
*/
#define LEAF(symbol) \
.globl symbol; \
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
symbol: .frame sp, 0, ra
/*
* END - mark end of function
*/
#define END(function) \
.end function; \
.size function, . - function
#define _ULCAST_
#define MFC0_SEL(dst, src, sel) \
.word\t(0x40000000 | ((dst) << 16) | ((src) << 11) | (sel))
#define MTC0_SEL(dst, src, sel) \
.word\t(0x40800000 | ((dst) << 16) | ((src) << 11) | (sel))
#else
/*
* The following macros are especially useful for __asm__
* inline assembler.
*/
#ifndef __STR
#define __STR(x) #x
#endif
#ifndef STR
#define STR(x) __STR(x)
#endif
#define _ULCAST_ (unsigned long)
/* CP0 Registers */
#define C0_INX 0 /* CP0: TLB Index */
#define C0_RAND 1 /* CP0: TLB Random */
#define C0_TLBLO0 2 /* CP0: TLB EntryLo0 */
#define C0_TLBLO C0_TLBLO0 /* CP0: TLB EntryLo0 */
#define C0_TLBLO1 3 /* CP0: TLB EntryLo1 */
#define C0_CTEXT 4 /* CP0: Context */
#define C0_PGMASK 5 /* CP0: TLB PageMask */
#define C0_WIRED 6 /* CP0: TLB Wired */
#define C0_INFO 7 /* CP0: Info */
#define C0_BADVADDR 8 /* CP0: Bad Virtual Address */
#define C0_COUNT 9 /* CP0: Count */
#define C0_TLBHI 10 /* CP0: TLB EntryHi */
#define C0_COMPARE 11 /* CP0: Compare */
#define C0_SR 12 /* CP0: Processor Status */
#define C0_STATUS C0_SR /* CP0: Processor Status */
#define C0_CAUSE 13 /* CP0: Exception Cause */
#define C0_EPC 14 /* CP0: Exception PC */
#define C0_PRID 15 /* CP0: Processor Revision Indentifier */
#define C0_CONFIG 16 /* CP0: Config */
#define C0_LLADDR 17 /* CP0: LLAddr */
#define C0_WATCHLO 18 /* CP0: WatchpointLo */
#define C0_WATCHHI 19 /* CP0: WatchpointHi */
#define C0_XCTEXT 20 /* CP0: XContext */
#define C0_DIAGNOSTIC 22 /* CP0: Diagnostic */
#define C0_BROADCOM C0_DIAGNOSTIC /* CP0: Broadcom Register */
#define C0_PERFORMANCE 25 /* CP0: Performance Counter/Control Registers */
#define C0_ECC 26 /* CP0: ECC */
#define C0_CACHEERR 27 /* CP0: CacheErr */
#define C0_TAGLO 28 /* CP0: TagLo */
#define C0_TAGHI 29 /* CP0: TagHi */
#define C0_ERREPC 30 /* CP0: ErrorEPC */
#define C0_DESAVE 31 /* CP0: DebugSave */
#endif /* _LANGUAGE_ASSEMBLY */
/*
* Memory segments (32bit kernel mode addresses)
*/
#undef KUSEG
#undef KSEG0
#undef KSEG1
#undef KSEG2
#undef KSEG3
#define KUSEG 0x00000000
#define KSEG0 0x80000000
#define KSEG1 0xa0000000
#define KSEG2 0xc0000000
#define KSEG3 0xe0000000
#define PHYSADDR_MASK 0x1fffffff
/*
* Map an address to a certain kernel segment
*/
#undef PHYSADDR
#undef KSEG0ADDR
#undef KSEG1ADDR
#undef KSEG2ADDR
#undef KSEG3ADDR
#define PHYSADDR(a) (_ULCAST_(a) & PHYSADDR_MASK)
#define KSEG0ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG0)
#define KSEG1ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG1)
#define KSEG2ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG2)
#define KSEG3ADDR(a) ((_ULCAST_(a) & PHYSADDR_MASK) | KSEG3)
#ifndef Index_Invalidate_I
/*
* Cache Operations
*/
#define Index_Invalidate_I 0x00
#define Index_Writeback_Inv_D 0x01
#define Index_Invalidate_SI 0x02
#define Index_Writeback_Inv_SD 0x03
#define Index_Load_Tag_I 0x04
#define Index_Load_Tag_D 0x05
#define Index_Load_Tag_SI 0x06
#define Index_Load_Tag_SD 0x07
#define Index_Store_Tag_I 0x08
#define Index_Store_Tag_D 0x09
#define Index_Store_Tag_SI 0x0A
#define Index_Store_Tag_SD 0x0B
#define Create_Dirty_Excl_D 0x0d
#define Create_Dirty_Excl_SD 0x0f
#define Hit_Invalidate_I 0x10
#define Hit_Invalidate_D 0x11
#define Hit_Invalidate_SI 0x12
#define Hit_Invalidate_SD 0x13
#define Fill_I 0x14
#define Hit_Writeback_Inv_D 0x15
/* 0x16 is unused */
#define Hit_Writeback_Inv_SD 0x17
#define R5K_Page_Invalidate_S 0x17
#define Hit_Writeback_I 0x18
#define Hit_Writeback_D 0x19
/* 0x1a is unused */
#define Hit_Writeback_SD 0x1b
/* 0x1c is unused */
/* 0x1e is unused */
#define Hit_Set_Virtual_SI 0x1e
#define Hit_Set_Virtual_SD 0x1f
#endif /* !Index_Invalidate_I */
/*
* R4x00 interrupt enable / cause bits
*/
#define IE_SW0 (_ULCAST_(1) << 8)
#define IE_SW1 (_ULCAST_(1) << 9)
#define IE_IRQ0 (_ULCAST_(1) << 10)
#define IE_IRQ1 (_ULCAST_(1) << 11)
#define IE_IRQ2 (_ULCAST_(1) << 12)
#define IE_IRQ3 (_ULCAST_(1) << 13)
#define IE_IRQ4 (_ULCAST_(1) << 14)
#define IE_IRQ5 (_ULCAST_(1) << 15)
#ifndef ST0_UM
/*
* Bitfields in the mips32 cp0 status register
*/
#define ST0_IE 0x00000001
#define ST0_EXL 0x00000002
#define ST0_ERL 0x00000004
#define ST0_UM 0x00000010
#define ST0_SWINT0 0x00000100
#define ST0_SWINT1 0x00000200
#define ST0_HWINT0 0x00000400
#define ST0_HWINT1 0x00000800
#define ST0_HWINT2 0x00001000
#define ST0_HWINT3 0x00002000
#define ST0_HWINT4 0x00004000
#define ST0_HWINT5 0x00008000
#define ST0_IM 0x0000ff00
#define ST0_NMI 0x00080000
#define ST0_SR 0x00100000
#define ST0_TS 0x00200000
#define ST0_BEV 0x00400000
#define ST0_RE 0x02000000
#define ST0_RP 0x08000000
#define ST0_CU 0xf0000000
#define ST0_CU0 0x10000000
#define ST0_CU1 0x20000000
#define ST0_CU2 0x40000000
#define ST0_CU3 0x80000000
#endif /* !ST0_UM */
/*
* Bitfields in the mips32 cp0 cause register
*/
#define C_EXC 0x0000007c
#define C_EXC_SHIFT 2
#define C_INT 0x0000ff00
#define C_INT_SHIFT 8
#define C_SW0 (_ULCAST_(1) << 8)
#define C_SW1 (_ULCAST_(1) << 9)
#define C_IRQ0 (_ULCAST_(1) << 10)
#define C_IRQ1 (_ULCAST_(1) << 11)
#define C_IRQ2 (_ULCAST_(1) << 12)
#define C_IRQ3 (_ULCAST_(1) << 13)
#define C_IRQ4 (_ULCAST_(1) << 14)
#define C_IRQ5 (_ULCAST_(1) << 15)
#define C_WP 0x00400000
#define C_IV 0x00800000
#define C_CE 0x30000000
#define C_CE_SHIFT 28
#define C_BD 0x80000000
/* Values in C_EXC */
#define EXC_INT 0
#define EXC_TLBM 1
#define EXC_TLBL 2
#define EXC_TLBS 3
#define EXC_AEL 4
#define EXC_AES 5
#define EXC_IBE 6
#define EXC_DBE 7
#define EXC_SYS 8
#define EXC_BPT 9
#define EXC_RI 10
#define EXC_CU 11
#define EXC_OV 12
#define EXC_TR 13
#define EXC_WATCH 23
#define EXC_MCHK 24
/*
* Bits in the cp0 config register.
*/
#define CONF_CM_CACHABLE_NO_WA 0
#define CONF_CM_CACHABLE_WA 1
#define CONF_CM_UNCACHED 2
#define CONF_CM_CACHABLE_NONCOHERENT 3
#define CONF_CM_CACHABLE_CE 4
#define CONF_CM_CACHABLE_COW 5
#define CONF_CM_CACHABLE_CUW 6
#define CONF_CM_CACHABLE_ACCELERATED 7
#define CONF_CM_CMASK 7
#define CONF_CU (_ULCAST_(1) << 3)
#define CONF_DB (_ULCAST_(1) << 4)
#define CONF_IB (_ULCAST_(1) << 5)
#define CONF_SE (_ULCAST_(1) << 12)
#ifndef CONF_BE /* duplicate in mipsregs.h */
#define CONF_BE (_ULCAST_(1) << 15)
#endif
#define CONF_SC (_ULCAST_(1) << 17)
#define CONF_AC (_ULCAST_(1) << 23)
#define CONF_HALT (_ULCAST_(1) << 25)
#ifndef CONF_M /* duplicate in mipsregs.h */
#define CONF_M (_ULCAST_(1) << 31)
#endif
/*
* Bits in the cp0 config register select 1.
*/
#define CONF1_FP 0x00000001 /* FPU present */
#define CONF1_EP 0x00000002 /* EJTAG present */
#define CONF1_CA 0x00000004 /* mips16 implemented */
#define CONF1_WR 0x00000008 /* Watch registers present */
#define CONF1_PC 0x00000010 /* Performance counters present */
#define CONF1_DA_SHIFT 7 /* D$ associativity */
#define CONF1_DA_MASK 0x00000380
#define CONF1_DA_BASE 1
#define CONF1_DL_SHIFT 10 /* D$ line size */
#define CONF1_DL_MASK 0x00001c00
#define CONF1_DL_BASE 2
#define CONF1_DS_SHIFT 13 /* D$ sets/way */
#define CONF1_DS_MASK 0x0000e000
#define CONF1_DS_BASE 64
#define CONF1_IA_SHIFT 16 /* I$ associativity */
#define CONF1_IA_MASK 0x00070000
#define CONF1_IA_BASE 1
#define CONF1_IL_SHIFT 19 /* I$ line size */
#define CONF1_IL_MASK 0x00380000
#define CONF1_IL_BASE 2
#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
#define CONF1_IS_MASK 0x01c00000
#define CONF1_IS_BASE 64
#define CONF1_MS_MASK 0x7e000000 /* Number of tlb entries */
#define CONF1_MS_SHIFT 25
/* PRID register */
#define PRID_COPT_MASK 0xff000000
#define PRID_COMP_MASK 0x00ff0000
#define PRID_IMP_MASK 0x0000ff00
#define PRID_REV_MASK 0x000000ff
#define PRID_COMP_LEGACY 0x000000
#define PRID_COMP_MIPS 0x010000
#define PRID_COMP_BROADCOM 0x020000
#define PRID_COMP_ALCHEMY 0x030000
#define PRID_COMP_SIBYTE 0x040000
#define PRID_IMP_BCM4710 0x4000
#define PRID_IMP_BCM3302 0x9000
#define PRID_IMP_BCM3303 0x9100
#define PRID_IMP_UNKNOWN 0xff00
#define BCM330X(id) \
(((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
(PRID_COMP_BROADCOM | PRID_IMP_BCM3302)) || \
((id & (PRID_COMP_MASK | PRID_IMP_MASK)) == \
(PRID_COMP_BROADCOM | PRID_IMP_BCM3303)))
/* Bits in C0_BROADCOM */
#define BRCM_PFC_AVAIL 0x20000000 /* PFC is available */
#define BRCM_DC_ENABLE 0x40000000 /* Enable Data $ */
#define BRCM_IC_ENABLE 0x80000000 /* Enable Instruction $ */
#define BRCM_PFC_ENABLE 0x00400000 /* Obsolete? Enable PFC (at least on 4310) */
#define BRCM_CLF_ENABLE 0x00100000 /* Enable cache line first feature */
/* PreFetch Cache aka Read Ahead Cache */
#define PFC_CR0 0xff400000 /* control reg 0 */
#define PFC_CR1 0xff400004 /* control reg 1 */
/* PFC operations */
#define PFC_I 0x00000001 /* Enable PFC use for instructions */
#define PFC_D 0x00000002 /* Enable PFC use for data */
#define PFC_PFI 0x00000004 /* Enable seq. prefetch for instructions */
#define PFC_PFD 0x00000008 /* Enable seq. prefetch for data */
#define PFC_CINV 0x00000010 /* Enable selective (i/d) cacheop flushing */
#define PFC_NCH 0x00000020 /* Disable flushing based on cacheops */
#define PFC_DPF 0x00000040 /* Enable directional prefetching */
#define PFC_FLUSH 0x00000100 /* Flush the PFC */
#define PFC_BRR 0x40000000 /* Bus error indication */
#define PFC_PWR 0x80000000 /* Disable power saving (clock gating) */
/* Handy defaults */
#define PFC_DISABLED 0
#define PFC_AUTO 0xffffffff /* auto select the default mode */
#define PFC_INST (PFC_I | PFC_PFI | PFC_CINV)
#define PFC_INST_NOPF (PFC_I | PFC_CINV)
#define PFC_DATA (PFC_D | PFC_PFD | PFC_CINV)
#define PFC_DATA_NOPF (PFC_D | PFC_CINV)
#define PFC_I_AND_D (PFC_INST | PFC_DATA)
#define PFC_I_AND_D_NOPF (PFC_INST_NOPF | PFC_DATA_NOPF)
#ifndef _LANGUAGE_ASSEMBLY
/*
* Macros to access the system control coprocessor
*/
#define MFC0(source, sel) \
({ \
int __res; \
__asm__ __volatile__(" \
.set\tnoreorder; \
.set\tnoat; \
.word\t"STR(0x40010000 | ((source) << 11) | (sel))"; \
move\t%0, $1; \
.set\tat; \
.set\treorder" \
:"=r" (__res) \
: \
:"$1"); \
__res; \
})
#define MTC0(source, sel, value) \
do { \
__asm__ __volatile__(" \
.set\tnoreorder; \
.set\tnoat; \
move\t$1, %z0; \
.word\t"STR(0x40810000 | ((source) << 11) | (sel))"; \
.set\tat; \
.set\treorder" \
: \
:"jr" (value) \
:"$1"); \
} while (0)
#define get_c0_count() \
({ \
int __res; \
__asm__ __volatile__(" \
.set\tnoreorder; \
.set\tnoat; \
mfc0\t%0, $9; \
.set\tat; \
.set\treorder" \
:"=r" (__res)); \
__res; \
})
static INLINE void icache_probe(uint32 config1, uint *size, uint *lsize)
{
uint lsz, sets, ways;
/* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
if ((lsz = ((config1 & CONF1_IL_MASK) >> CONF1_IL_SHIFT)))
lsz = CONF1_IL_BASE << lsz;
sets = CONF1_IS_BASE << ((config1 & CONF1_IS_MASK) >> CONF1_IS_SHIFT);
ways = CONF1_IA_BASE + ((config1 & CONF1_IA_MASK) >> CONF1_IA_SHIFT);
*size = lsz * sets * ways;
*lsize = lsz;
}
static INLINE void dcache_probe(uint32 config1, uint *size, uint *lsize)
{
uint lsz, sets, ways;
/* Data Cache Size = Associativity * Line Size * Sets Per Way */
if ((lsz = ((config1 & CONF1_DL_MASK) >> CONF1_DL_SHIFT)))
lsz = CONF1_DL_BASE << lsz;
sets = CONF1_DS_BASE << ((config1 & CONF1_DS_MASK) >> CONF1_DS_SHIFT);
ways = CONF1_DA_BASE + ((config1 & CONF1_DA_MASK) >> CONF1_DA_SHIFT);
*size = lsz * sets * ways;
*lsize = lsz;
}
#define cache_op(base, op) \
__asm__ __volatile__(" \
.set noreorder; \
.set mips3; \
cache %1, (%0); \
.set mips0; \
.set reorder" \
: \
: "r" (base), \
"i" (op));
#define cache_unroll4(base, delta, op) \
__asm__ __volatile__(" \
.set noreorder; \
.set mips3; \
cache %1, 0(%0); \
cache %1, delta(%0); \
cache %1, (2 * delta)(%0); \
cache %1, (3 * delta)(%0); \
.set mips0; \
.set reorder" \
: \
: "r" (base), \
"i" (op));
#endif /* !_LANGUAGE_ASSEMBLY */
#endif /* _MISPINC_H */