openwrt/target/linux/generic-2.4/patches/000-linux_mips.patch

28215 lines
793 KiB
Diff
Raw Blame History

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

Index: linux-2.4.35.4/arch/mips/au1000/common/au1xxx_irqmap.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/au1xxx_irqmap.c
+++ linux-2.4.35.4/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -172,14 +172,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@@ -200,14 +200,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
- { AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
Index: linux-2.4.35.4/arch/mips/au1000/common/cputable.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/cputable.c
+++ linux-2.4.35.4/arch/mips/au1000/common/cputable.c
@@ -39,7 +39,8 @@ struct cpu_spec cpu_specs[] = {
{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 0, 0 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
};
Index: linux-2.4.35.4/arch/mips/au1000/common/dbdma.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/dbdma.c
+++ linux-2.4.35.4/arch/mips/au1000/common/dbdma.c
@@ -41,6 +41,8 @@
#include <asm/au1xxx_dbdma.h>
#include <asm/system.h>
+#include <linux/module.h>
+
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
/*
@@ -60,37 +62,10 @@ static spinlock_t au1xxx_dbdma_spin_lock
*/
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
-static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized;
+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
+static int dbdma_initialized=0;
static void au1xxx_dbdma_init(void);
-typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
-} dbdev_tab_t;
-
-typedef struct dbdma_chan_config {
- u32 chan_flags;
- u32 chan_index;
- dbdev_tab_t *chan_src;
- dbdev_tab_t *chan_dest;
- au1x_dma_chan_t *chan_ptr;
- au1x_ddma_desc_t *chan_desc_base;
- au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
- void *chan_callparam;
- void (*chan_callback)(int, void *, struct pt_regs *);
-} chan_tab_t;
-
-#define DEV_FLAGS_INUSE (1 << 0)
-#define DEV_FLAGS_ANYUSE (1 << 1)
-#define DEV_FLAGS_OUT (1 << 2)
-#define DEV_FLAGS_IN (1 << 3)
-
static dbdev_tab_t dbdev_tab[] = {
#ifdef CONFIG_SOC_AU1550
/* UARTS */
@@ -156,13 +131,13 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+ { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+ { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+ { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
{ DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
{ DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
@@ -172,9 +147,9 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
{ DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+ { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+ { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
{ DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
@@ -183,6 +158,24 @@ static dbdev_tab_t dbdev_tab[] = {
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ /* Provide 16 user definable device types */
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0 },
};
#define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t))
@@ -202,6 +195,30 @@ find_dbdev_id (u32 id)
return NULL;
}
+u32
+au1xxx_ddma_add_device(dbdev_tab_t *dev)
+{
+ u32 ret = 0;
+ dbdev_tab_t *p=NULL;
+ static u16 new_id=0x1000;
+
+ p = find_dbdev_id(0);
+ if ( NULL != p )
+ {
+ memcpy(p, dev, sizeof(dbdev_tab_t));
+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id);
+ ret = p->dev_id;
+ new_id++;
+#if 0
+ printk("add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr );
+#endif
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(au1xxx_ddma_add_device);
+
/* Allocate a channel and return a non-zero descriptor if successful.
*/
u32
@@ -214,7 +231,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d
int i;
dbdev_tab_t *stp, *dtp;
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
/* We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
@@ -224,9 +241,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS))
- return 0;
-
if ((stp = find_dbdev_id(srcid)) == NULL) return 0;
if ((dtp = find_dbdev_id(destid)) == NULL) return 0;
@@ -268,9 +282,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d
/* If kmalloc fails, it is caught below same
* as a channel not available.
*/
- ctp = (chan_tab_t *)kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
+ ctp = (chan_tab_t *)
+ kmalloc(sizeof(chan_tab_t), GFP_KERNEL);
chan_tab_ptr[i] = ctp;
- ctp->chan_index = chan = i;
break;
}
}
@@ -278,10 +292,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d
if (ctp != NULL) {
memset(ctp, 0, sizeof(chan_tab_t));
+ ctp->chan_index = chan = i;
dcp = DDMA_CHANNEL_BASE;
dcp += (0x0100 * chan);
ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
- cp = (volatile au1x_dma_chan_t *)dcp;
+ cp = (au1x_dma_chan_t *)dcp;
ctp->chan_src = stp;
ctp->chan_dest = dtp;
ctp->chan_callback = callback;
@@ -298,6 +313,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d
i |= DDMA_CFG_DED;
if (dtp->dev_intpolarity)
i |= DDMA_CFG_DP;
+ if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+ (dtp->dev_flags & DEV_FLAGS_SYNC))
+ i |= DDMA_CFG_SYNC;
cp->ddma_cfg = i;
au_sync();
@@ -308,14 +326,14 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d
rv = (u32)(&chan_tab_ptr[chan]);
}
else {
- /* Release devices.
- */
+ /* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
}
}
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
/* Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
@@ -343,6 +361,7 @@ au1xxx_dbdma_set_devwidth(u32 chanid, in
return rv;
}
+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
/* Allocate a descriptor ring, initializing as much as possible.
*/
@@ -369,7 +388,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
- desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
+ desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
@@ -380,7 +400,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
+ if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
@@ -460,9 +480,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int
/* If source input is fifo, set static address.
*/
if (stp->dev_flags & DEV_FLAGS_IN) {
- src0 = stp->dev_physaddr;
- src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+ if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
+ else
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
+
}
+ if (stp->dev_physaddr)
+ src0 = stp->dev_physaddr;
/* Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
@@ -486,10 +511,18 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int
/* If destination output is fifo, set static address.
*/
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- dest0 = dtp->dev_physaddr;
+ if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+ if (dtp->dev_physaddr)
+ dest0 = dtp->dev_physaddr;
+#if 0
+ printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+#endif
for (i=0; i<entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
@@ -498,6 +531,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int
dp->dscr_dest0 = dest0;
dp->dscr_dest1 = dest1;
dp->dscr_stat = 0;
+ dp->sw_context = dp->sw_status = 0;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1));
dp++;
}
@@ -510,13 +544,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int
return (u32)(ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
/* Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
u32
-au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -543,24 +578,40 @@ au1xxx_dbdma_put_source(u32 chanid, void
*/
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
- ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */
-
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
/* Get next descriptor pointer.
*/
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result
+ * in "stale" data being DMA'd. It has to do with the snoop logic on
+ * the dache eviction buffer. NONCOHERENT_IO is on by default for
+ * these parts. If it is fixedin the future, these dma_cache_inv will
+ * just be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_wback_inv(buf,nbytes);
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv(dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
+
/* return something not zero.
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
/* Put a destination buffer into the DMA ring.
* This updates the destination pointer and byte count. Normally used
* to place an empty buffer into the ring for fifo to memory transfers.
*/
u32
-au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes)
+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -582,11 +633,33 @@ au1xxx_dbdma_put_dest(u32 chanid, void *
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count */
+
+ /* Check flags */
+ if (flags & DDMA_FLAGS_IE)
+ dp->dscr_cmd0 |= DSCR_CMD0_IE;
+ if (flags & DDMA_FLAGS_NOIE)
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
+#if 0
+ printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+#endif
+ /*
+ * There is an errata on the Au1200/Au1550 parts that could result in
+ * "stale" data being DMA'd. It has to do with the snoop logic on the
+ * dache eviction buffer. NONCOHERENT_IO is on by default for these
+ * parts. If it is fixedin the future, these dma_cache_inv will just
+ * be nothing more than empty macros. See io.h.
+ * */
+ dma_cache_inv(buf,nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ au_sync();
+ dma_cache_wback_inv(dp, sizeof(dp));
+ ctp->chan_ptr->ddma_dbell = 0;
/* Get next descriptor pointer.
*/
@@ -596,6 +669,7 @@ au1xxx_dbdma_put_dest(u32 chanid, void *
*/
return nbytes;
}
+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
/* Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
@@ -645,7 +719,7 @@ void
au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
int halt_timeout = 0;
ctp = *((chan_tab_t **)chanid);
@@ -665,6 +739,7 @@ au1xxx_dbdma_stop(u32 chanid)
cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V);
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_stop);
/* Start using the current descriptor pointer. If the dbdma encounters
* a not valid descriptor, it will stop. In this case, we can just
@@ -674,17 +749,17 @@ void
au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
ctp = *((chan_tab_t **)chanid);
-
cp = ctp->chan_ptr;
cp->ddma_desptr = virt_to_phys(ctp->cur_ptr);
cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */
au_sync();
- cp->ddma_dbell = 0xffffffff; /* Make it go */
+ cp->ddma_dbell = 0;
au_sync();
}
+EXPORT_SYMBOL(au1xxx_dbdma_start);
void
au1xxx_dbdma_reset(u32 chanid)
@@ -703,15 +778,21 @@ au1xxx_dbdma_reset(u32 chanid)
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
+ /* reset our SW status -- this is used to determine
+ * if a descriptor is in use by upper level SW. Since
+ * posting can reset 'V' bit.
+ */
+ dp->sw_status = 0;
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+EXPORT_SYMBOL(au1xxx_dbdma_reset);
u32
au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
u32 rv;
ctp = *((chan_tab_t **)chanid);
@@ -746,15 +827,16 @@ au1xxx_dbdma_chan_free(u32 chanid)
kfree(ctp);
}
+EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
static void
dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
- u32 intstat;
+ u32 intstat, flags;
u32 chan_index;
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
intstat = dbdma_gptr->ddma_intstat;
au_sync();
@@ -773,18 +855,26 @@ dbdma_interrupt(int irq, void *dev_id, s
(ctp->chan_callback)(irq, ctp->chan_callparam, regs);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
-
}
-static void
-au1xxx_dbdma_init(void)
+static void au1xxx_dbdma_init(void)
{
+ int irq_nr;
+
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
- if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT,
+#if defined(CONFIG_SOC_AU1550)
+ irq_nr = AU1550_DDMA_INT;
+#elif defined(CONFIG_SOC_AU1200)
+ irq_nr = AU1200_DDMA_INT;
+#else
+ #error Unknown Au1x00 SOC
+#endif
+
+ if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT,
"Au1xxx dbdma", (void *)dbdma_gptr))
printk("Can't get 1550 dbdma irq");
}
@@ -795,7 +885,8 @@ au1xxx_dbdma_dump(u32 chanid)
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
dbdev_tab_t *stp, *dtp;
- volatile au1x_dma_chan_t *cp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
@@ -820,15 +911,64 @@ au1xxx_dbdma_dump(u32 chanid)
dp = ctp->chan_desc_base;
do {
- printk("dp %08x, cmd0 %08x, cmd1 %08x\n",
- (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0);
- printk("dest1 %08x, stat %08x, nxtptr %08x\n",
- dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr);
+ printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
+ printk("stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
+/* Put a descriptor into the DMA ring.
+ * This updates the source/destination pointers and byte count.
+ */
+u32
+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+{
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ u32 nbytes=0;
+
+ /* I guess we could check this to be within the
+ * range of the table......
+ */
+ ctp = *((chan_tab_t **)chanid);
+
+ /* We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
+ dp = ctp->put_ptr;
+
+ /* If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
+ return 0;
+
+ /* Load up buffer addresses and byte count.
+ */
+ dp->dscr_dest0 = dscr->dscr_dest0;
+ dp->dscr_source0 = dscr->dscr_source0;
+ dp->dscr_dest1 = dscr->dscr_dest1;
+ dp->dscr_source1 = dscr->dscr_source1;
+ dp->dscr_cmd1 = dscr->dscr_cmd1;
+ nbytes = dscr->dscr_cmd1;
+ /* Allow the caller to specifiy if an interrupt is generated */
+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
+ dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
+ ctp->chan_ptr->ddma_dbell = 0;
+
+ /* Get next descriptor pointer.
+ */
+ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+
+ /* return something not zero.
+ */
+ return nbytes;
+}
+
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
Index: linux-2.4.35.4/arch/mips/au1000/common/gpio.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/common/gpio.c
@@ -0,0 +1,118 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/au1000.h>
+#include <asm/au1xxx_gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+
+int au1xxx_gpio2_read(int signal)
+{
+ signal -= 200;
+/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */
+ return ((gpio2->pinstate >> signal) & 0x01);
+}
+
+void au1xxx_gpio2_write(int signal, int value)
+{
+ signal -= 200;
+
+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+ (value << signal);
+}
+
+void au1xxx_gpio2_tristate(int signal)
+{
+ signal -= 200;
+ gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */
+}
+#endif
+
+int au1xxx_gpio1_read(int signal)
+{
+/* gpio1->trioutclr |= (0x01 << signal); */
+ return ((gpio1->pinstaterd >> signal) & 0x01);
+}
+
+void au1xxx_gpio1_write(int signal, int value)
+{
+ if(value)
+ gpio1->outputset = (0x01 << signal);
+ else
+ gpio1->outputclr = (0x01 << signal); /* Output a Zero */
+}
+
+void au1xxx_gpio1_tristate(int signal)
+{
+ gpio1->trioutclr = (0x01 << signal); /* Tristate signal */
+}
+
+
+int au1xxx_gpio_read(int signal)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ return 0;
+#else
+ return au1xxx_gpio2_read(signal);
+#endif
+ else
+ return au1xxx_gpio1_read(signal);
+}
+
+void au1xxx_gpio_write(int signal, int value)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ au1xxx_gpio2_write(signal, value);
+#endif
+ else
+ au1xxx_gpio1_write(signal, value);
+}
+
+void au1xxx_gpio_tristate(int signal)
+{
+ if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+ ;
+#else
+ au1xxx_gpio2_tristate(signal);
+#endif
+ else
+ au1xxx_gpio1_tristate(signal);
+}
+
+void au1xxx_gpio1_set_inputs(void)
+{
+ gpio1->pininputen = 0;
+}
+
+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+EXPORT_SYMBOL(au1xxx_gpio_tristate);
+EXPORT_SYMBOL(au1xxx_gpio_write);
+EXPORT_SYMBOL(au1xxx_gpio_read);
Index: linux-2.4.35.4/arch/mips/au1000/common/irq.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/irq.c
+++ linux-2.4.35.4/arch/mips/au1000/common/irq.c
@@ -303,8 +303,30 @@ static struct hw_interrupt_type level_ir
};
#ifdef CONFIG_PM
-void startup_match20_interrupt(void)
+void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *))
{
+ static struct irqaction action;
+ /* This is a big problem.... since we didn't use request_irq
+ when kernel/irq.c calls probe_irq_xxx this interrupt will
+ be probed for usage. This will end up disabling the device :(
+
+ Give it a bogus "action" pointer -- this will keep it from
+ getting auto-probed!
+
+ By setting the status to match that of request_irq() we
+ can avoid it. --cgray
+ */
+ action.dev_id = handler;
+ action.flags = 0;
+ action.mask = 0;
+ action.name = "Au1xxx TOY";
+ action.handler = handler;
+ action.next = NULL;
+
+ irq_desc[AU1000_TOY_MATCH2_INT].action = &action;
+ irq_desc[AU1000_TOY_MATCH2_INT].status
+ &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
+
local_enable_irq(AU1000_TOY_MATCH2_INT);
}
#endif
@@ -508,6 +530,7 @@ void intc0_req0_irqdispatch(struct pt_re
if (!intc0_req0) return;
+#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
@@ -518,6 +541,7 @@ void intc0_req0_irqdispatch(struct pt_re
do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
return;
}
+#endif
irq = au_ffs(intc0_req0) - 1;
intc0_req0 &= ~(1<<irq);
@@ -536,17 +560,7 @@ void intc0_req1_irqdispatch(struct pt_re
irq = au_ffs(intc0_req1) - 1;
intc0_req1 &= ~(1<<irq);
-#ifdef CONFIG_PM
- if (irq == AU1000_TOY_MATCH2_INT) {
- mask_and_ack_rise_edge_irq(irq);
- counter0_irq(irq, NULL, regs);
- local_enable_irq(irq);
- }
- else
-#endif
- {
- do_IRQ(irq, regs);
- }
+ do_IRQ(irq, regs);
}
Index: linux-2.4.35.4/arch/mips/au1000/common/Makefile
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/Makefile
+++ linux-2.4.35.4/arch/mips/au1000/common/Makefile
@@ -19,9 +19,9 @@ O_TARGET := au1000.o
export-objs = prom.o clocks.o power.o usbdev.o
obj-y := prom.o int-handler.o irq.o puts.o time.o reset.o cputable.o \
- au1xxx_irqmap.o clocks.o power.o setup.o sleeper.o dma.o dbdma.o
+ au1xxx_irqmap.o clocks.o power.o setup.o sleeper.o dma.o dbdma.o gpio.o
-export-objs += dma.o dbdma.o
+export-objs += dma.o dbdma.o gpio.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o
Index: linux-2.4.35.4/arch/mips/au1000/common/pci_fixup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/pci_fixup.c
+++ linux-2.4.35.4/arch/mips/au1000/common/pci_fixup.c
@@ -75,9 +75,13 @@ void __init pcibios_fixup(void)
#ifdef CONFIG_NONCOHERENT_IO
/*
- * Set the NC bit in controller for pre-AC silicon
+ * Set the NC bit in controller for Au1500 pre-AC silicon
*/
- au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
+ u32 prid = read_c0_prid();
+ if ( (prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
+ au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
+ printk("Non-coherent PCI accesses enabled\n");
+ }
printk("Non-coherent PCI accesses enabled\n");
#endif
Index: linux-2.4.35.4/arch/mips/au1000/common/pci_ops.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/pci_ops.c
+++ linux-2.4.35.4/arch/mips/au1000/common/pci_ops.c
@@ -162,6 +162,7 @@ unsigned long last_entryLo0, last_entryL
static int config_access(unsigned char access_type, struct pci_dev *dev,
unsigned char where, u32 * data)
{
+ int error = PCIBIOS_SUCCESSFUL;
#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
unsigned char bus = dev->bus->number;
unsigned int dev_fn = dev->devfn;
@@ -170,7 +171,6 @@ static int config_access(unsigned char a
unsigned long offset, status;
unsigned long cfg_base;
unsigned long flags;
- int error = PCIBIOS_SUCCESSFUL;
unsigned long entryLo0, entryLo1;
if (device > 19) {
@@ -205,9 +205,8 @@ static int config_access(unsigned char a
last_entryLo0 = last_entryLo1 = 0xffffffff;
}
- /* Since the Au1xxx doesn't do the idsel timing exactly to spec,
- * many board vendors implement their own off-chip idsel, so call
- * it now. If it doesn't succeed, may as well bail out at this point.
+ /* Allow board vendors to implement their own off-chip idsel.
+ * If it doesn't succeed, may as well bail out at this point.
*/
if (board_pci_idsel) {
if (board_pci_idsel(device, 1) == 0) {
@@ -271,8 +270,11 @@ static int config_access(unsigned char a
}
local_irq_restore(flags);
- return error;
+#else
+ /* Fake out Config space access with no responder */
+ *data = 0xFFFFFFFF;
#endif
+ return error;
}
#endif
Index: linux-2.4.35.4/arch/mips/au1000/common/power.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/power.c
+++ linux-2.4.35.4/arch/mips/au1000/common/power.c
@@ -50,7 +50,6 @@
static void calibrate_delay(void);
-extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
extern unsigned long get_au1x00_uart_baud_base(void);
extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
@@ -116,6 +115,7 @@ save_core_regs(void)
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
+#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device.
*/
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
@@ -127,6 +127,7 @@ save_core_regs(void)
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
+#endif
/* Save interrupt controller state.
*/
@@ -212,14 +213,12 @@ void wakeup_from_suspend(void)
int au_sleep(void)
{
unsigned long wakeup, flags;
- extern void save_and_sleep(void);
+ extern unsigned int save_and_sleep(void);
spin_lock_irqsave(&pm_lock,flags);
save_core_regs();
- flush_cache_all();
-
/** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
@@ -227,27 +226,26 @@ int au_sleep(void)
** For testing, the TOY counter wakeup is useful.
**/
-#if 0
+#if 1
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
/* gpio 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */
- wakeup |= 1 << 6; /* turn on gpio 6 wakeup */
+ wakeup = 1 << 5; /* turn on gpio 6 wakeup */
#else
- /* For testing, allow match20 to wake us up.
- */
+ /* For testing, allow match20 to wake us up. */
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
wakeup = 1 << 8; /* turn on match20 wakeup */
wakeup = 0;
#endif
- au_writel(1, SYS_WAKESRC); /* clear cause */
+ au_writel(0, SYS_WAKESRC); /* clear cause */
au_sync();
au_writel(wakeup, SYS_WAKEMSK);
au_sync();
-
+ DPRINTK("Entering sleep!\n");
save_and_sleep();
/* after a wakeup, the cpu vectors back to 0x1fc00000 so
@@ -255,6 +253,7 @@ int au_sleep(void)
*/
restore_core_regs();
spin_unlock_irqrestore(&pm_lock, flags);
+ DPRINTK("Leaving sleep!\n");
return 0;
}
@@ -285,7 +284,6 @@ static int pm_do_sleep(ctl_table * ctl,
if (retval)
return retval;
-
au_sleep();
retval = pm_send_all(PM_RESUME, (void *) 0);
}
@@ -296,7 +294,6 @@ static int pm_do_suspend(ctl_table * ctl
void *buffer, size_t * len)
{
int retval = 0;
- void au1k_wait(void);
if (!write) {
*len = 0;
@@ -305,119 +302,9 @@ static int pm_do_suspend(ctl_table * ctl
if (retval)
return retval;
suspend_mode = 1;
- au1k_wait();
- retval = pm_send_all(PM_RESUME, (void *) 0);
- }
- return retval;
-}
-
-static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void *buffer, size_t * len)
-{
- int retval = 0, i;
- unsigned long val, pll;
-#define TMPBUFLEN 64
-#define MAX_CPU_FREQ 396
- char buf[TMPBUFLEN], *p;
- unsigned long flags, intc0_mask, intc1_mask;
- unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
- old_refresh;
- unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
-
- spin_lock_irqsave(&pm_lock, flags);
- if (!write) {
- *len = 0;
- } else {
- /* Parse the new frequency */
- if (*len > TMPBUFLEN - 1) {
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
- if (copy_from_user(buf, buffer, *len)) {
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
- buf[*len] = 0;
- p = buf;
- val = simple_strtoul(p, &p, 0);
- if (val > MAX_CPU_FREQ) {
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
-
- pll = val / 12;
- if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
- /* revisit this for higher speed cpus */
- spin_unlock_irqrestore(&pm_lock, flags);
- return -EFAULT;
- }
-
- old_baud_base = get_au1x00_uart_baud_base();
- old_cpu_freq = get_au1x00_speed();
-
- new_cpu_freq = pll * 12 * 1000000;
- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
- set_au1x00_speed(new_cpu_freq);
- set_au1x00_uart_baud_base(new_baud_base);
-
- old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
- new_refresh =
- ((old_refresh * new_cpu_freq) /
- old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
-
- au_writel(pll, SYS_CPUPLL);
- au_sync_delay(1);
- au_writel(new_refresh, MEM_SDREFCFG);
- au_sync_delay(1);
-
- for (i = 0; i < 4; i++) {
- if (au_readl
- (UART_BASE + UART_MOD_CNTRL +
- i * 0x00100000) == 3) {
- old_clk =
- au_readl(UART_BASE + UART_CLK +
- i * 0x00100000);
- // baud_rate = baud_base/clk
- baud_rate = old_baud_base / old_clk;
- /* we won't get an exact baud rate and the error
- * could be significant enough that our new
- * calculation will result in a clock that will
- * give us a baud rate that's too far off from
- * what we really want.
- */
- if (baud_rate > 100000)
- baud_rate = 115200;
- else if (baud_rate > 50000)
- baud_rate = 57600;
- else if (baud_rate > 30000)
- baud_rate = 38400;
- else if (baud_rate > 17000)
- baud_rate = 19200;
- else
- (baud_rate = 9600);
- // new_clk = new_baud_base/baud_rate
- new_clk = new_baud_base / baud_rate;
- au_writel(new_clk,
- UART_BASE + UART_CLK +
- i * 0x00100000);
- au_sync_delay(10);
- }
- }
+ retval = pm_send_all(PM_RESUME, (void *) 0);
}
-
-
- /* We don't want _any_ interrupts other than
- * match20. Otherwise our calibrate_delay()
- * calculation will be off, potentially a lot.
- */
- intc0_mask = save_local_and_disable(0);
- intc1_mask = save_local_and_disable(1);
- local_enable_irq(AU1000_TOY_MATCH2_INT);
- spin_unlock_irqrestore(&pm_lock, flags);
- calibrate_delay();
- restore_local_and_enable(0, intc0_mask);
- restore_local_and_enable(1, intc1_mask);
return retval;
}
@@ -425,7 +312,6 @@ static int pm_do_freq(ctl_table * ctl, i
static struct ctl_table pm_table[] = {
{ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend},
{ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep},
- {CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq},
{0}
};
Index: linux-2.4.35.4/arch/mips/au1000/common/reset.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/reset.c
+++ linux-2.4.35.4/arch/mips/au1000/common/reset.c
@@ -37,8 +37,6 @@
#include <asm/system.h>
#include <asm/au1000.h>
-extern int au_sleep(void);
-
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
@@ -144,6 +142,26 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
+ case 0x04000000: /* Au1200 */
+ au_writel(0x00, 0xb400300c); /* ddma */
+ au_writel(0x00, 0xb1a00004); /* psc 0 */
+ au_writel(0x00, 0xb1b00004); /* psc 1 */
+ au_writel(0x00d02000, 0xb4020004); /* ehci, ohci, udc, otg */
+ au_writel(0x00, 0xb5000004); /* lcd */
+ au_writel(0x00, 0xb060000c); /* sd0 */
+ au_writel(0x00, 0xb068000c); /* sd1 */
+ au_writel(0x00, 0xb1100100); /* swcnt */
+ au_writel(0x00, 0xb0300000); /* aes */
+ au_writel(0x00, 0xb4004000); /* cim */
+ au_writel(0x00, 0xb1100100); /* uart0_enable */
+ au_writel(0x00, 0xb1200100); /* uart1_enable */
+ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
+ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
+ au_writel(0x00, 0xb1900028); /* sys_clksrc */
+ au_writel(0x10, 0xb1900060); /* sys_cpupll */
+ au_writel(0x00, 0xb1900064); /* sys_auxpll */
+ au_writel(0x00, 0xb1900100); /* sys_pininputen */
+ break;
default:
break;
@@ -163,32 +181,23 @@ void au1000_restart(char *command)
void au1000_halt(void)
{
-#if defined(CONFIG_MIPS_PB1550)
- /* power off system */
- printk("\n** Powering off Pb1550\n");
- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
- au_sync();
- while(1); /* should not get here */
-#endif
- printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
- au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
-#endif
-#ifdef CONFIG_PM
- au_sleep();
-
- /* should not get here */
- printk(KERN_ERR "Unable to put cpu in sleep mode\n");
- while(1);
-#else
- while (1)
+ /* Use WAIT in a low-power infinite spin loop */
+ while (1) {
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
-#endif
+ }
}
void au1000_power_off(void)
{
+ extern void board_power_off (void);
+
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+
+ /* Give board a chance to power-off */
+ board_power_off();
+
+ /* If board can't power-off, spin forever */
au1000_halt();
}
Index: linux-2.4.35.4/arch/mips/au1000/common/setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/setup.c
+++ linux-2.4.35.4/arch/mips/au1000/common/setup.c
@@ -174,6 +174,40 @@ void __init au1x00_setup(void)
initrd_end = (unsigned long)&__rd_end;
#endif
+#if defined(CONFIG_SOC_AU1200)
+#ifdef CONFIG_USB_EHCI_HCD
+ if ((argptr = strstr(argptr, "usb_ehci=")) == NULL) {
+ char usb_args[80];
+ argptr = prom_getcmdline();
+ memset(usb_args, 0, sizeof(usb_args));
+ sprintf(usb_args, " usb_ehci=base:0x%x,len:0x%x,irq:%d",
+ USB_EHCI_BASE, USB_EHCI_LEN, AU1000_USB_HOST_INT);
+ strcat(argptr, usb_args);
+ }
+#ifdef CONFIG_USB_AMD5536UDC
+ /* enable EHC + OHC + UDC clocks, memory and bus mastering */
+/* au_writel( 0x00DF207F, USB_MSR_BASE + 4); */
+ au_writel( 0xC0DF207F, USB_MSR_BASE + 4); // incl. prefetch
+#else
+ /* enable EHC + OHC clocks, memory and bus mastering */
+/* au_writel( 0x00DB200F, USB_MSR_BASE + 4); */
+ au_writel( 0xC0DB200F, USB_MSR_BASE + 4); /* incl. prefetch */
+#endif
+ udelay(1000);
+
+#else /* CONFIG_USB_EHCI_HCD */
+
+#ifdef CONFIG_USB_AMD5536UDC
+#ifndef CONFIG_USB_OHCI
+ /* enable UDC clocks, memory and bus mastering */
+/* au_writel( 0x00DC2070, USB_MSR_BASE + 4); */
+ au_writel( 0xC0DC2070, USB_MSR_BASE + 4); // incl. prefetch
+ udelay(1000);
+#endif
+#endif
+#endif /* CONFIG_USB_EHCI_HCD */
+#endif /* CONFIG_SOC_AU1200 */
+
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_USB_OHCI
if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) {
@@ -187,19 +221,38 @@ void __init au1x00_setup(void)
#endif
#ifdef CONFIG_USB_OHCI
- // enable host controller and wait for reset done
+#if defined(CONFIG_SOC_AU1200)
+#ifndef CONFIG_USB_EHCI_HCD
+#ifdef CONFIG_USB_AMD5536UDC
+ /* enable OHC + UDC clocks, memory and bus mastering */
+/* au_writel( 0x00DD2073, USB_MSR_BASE + 4); */
+ au_writel( 0xC0DD2073, USB_MSR_BASE + 4); // incl. prefetch
+#else
+ /* enable OHC clocks, memory and bus mastering */
+ au_writel( 0x00D12003, USB_MSR_BASE + 4);
+#endif
+ udelay(1000);
+printk("DEBUG: Reading Au1200 USB2 reg 0x%x\n", au_readl(USB_MSR_BASE + 4));
+#endif
+#else
+ /* Au1000, Au1500, Au1100, Au1550 */
+ /* enable host controller and wait for reset done */
au_writel(0x08, USB_HOST_CONFIG);
udelay(1000);
au_writel(0x0E, USB_HOST_CONFIG);
udelay(1000);
- au_readl(USB_HOST_CONFIG); // throw away first read
+ au_readl(USB_HOST_CONFIG); /* throw away first read */
while (!(au_readl(USB_HOST_CONFIG) & 0x10))
au_readl(USB_HOST_CONFIG);
+#endif /* CONFIG_SOC_AU1200 */
#endif
-#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
+#else
+
+#endif /* defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) */
+
#ifdef CONFIG_FB
- // Needed if PCI video card in use
+ /* Needed if PCI video card in use */
conswitchp = &dummy_con;
#endif
@@ -209,8 +262,7 @@ void __init au1x00_setup(void)
#endif
#ifdef CONFIG_BLK_DEV_IDE
- /* Board setup takes precedence for unique devices.
- */
+ /* Board setup takes precedence for unique devices. */
if ((ide_ops == NULL) || (ide_ops == &no_ide_ops))
ide_ops = &std_ide_ops;
#endif
Index: linux-2.4.35.4/arch/mips/au1000/common/sleeper.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/sleeper.S
+++ linux-2.4.35.4/arch/mips/au1000/common/sleeper.S
@@ -15,17 +15,48 @@
#include <asm/addrspace.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
+#include <asm/au1000.h>
+
+/*
+ * Note: This file is *not* conditional on CONFIG_PM since Alchemy sleep
+ * need not be tied to any particular power management scheme.
+ */
+
+ .extern ___flush_cache_all
.text
- .set macro
- .set noat
.align 5
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
+/*
+ * Save the processor general registers and go to sleep. A wakeup
+ * condition will get us back here to restore the registers.
*/
-LEAF(save_and_sleep)
+/* still need to fix alignment issues here */
+save_and_sleep_frmsz = 48
+NESTED(save_and_sleep, save_and_sleep_frmsz, ra)
+ .set noreorder
+ .set nomacro
+ .set noat
+ subu sp, save_and_sleep_frmsz
+ sw ra, save_and_sleep_frmsz-4(sp)
+ sw s0, save_and_sleep_frmsz-8(sp)
+ sw s1, save_and_sleep_frmsz-12(sp)
+ sw s2, save_and_sleep_frmsz-16(sp)
+ sw s3, save_and_sleep_frmsz-20(sp)
+ sw s4, save_and_sleep_frmsz-24(sp)
+ sw s5, save_and_sleep_frmsz-28(sp)
+ sw s6, save_and_sleep_frmsz-32(sp)
+ sw s7, save_and_sleep_frmsz-36(sp)
+ sw s8, save_and_sleep_frmsz-40(sp)
+ sw gp, save_and_sleep_frmsz-44(sp)
+
+ /* We only need to save the registers that the calling function
+ * hasn't saved for us. 0 is always zero. 8 - 15, 24 and 25 are
+ * temporaries and can be used without saving. 26 and 27 are reserved
+ * for interrupt/trap handling and expected to change. 29 is the
+ * stack pointer which is handled as a special case here.
+ */
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
@@ -34,14 +65,6 @@ LEAF(save_and_sleep)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
- sw $8, PT_R8(sp)
- sw $9, PT_R9(sp)
- sw $10, PT_R10(sp)
- sw $11, PT_R11(sp)
- sw $12, PT_R12(sp)
- sw $13, PT_R13(sp)
- sw $14, PT_R14(sp)
- sw $15, PT_R15(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
@@ -50,32 +73,47 @@ LEAF(save_and_sleep)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
- sw $24, PT_R24(sp)
- sw $25, PT_R25(sp)
- sw $26, PT_R26(sp)
- sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
- sw $29, PT_R29(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
+#define PT_C0STATUS PT_LO
+#define PT_CONTEXT PT_HI
+#define PT_PAGEMASK PT_EPC
+#define PT_CONFIG PT_BVADDR
mfc0 k0, CP0_STATUS
- sw k0, 0x20(sp)
+ sw k0, PT_C0STATUS(sp) // 0x20
mfc0 k0, CP0_CONTEXT
- sw k0, 0x1c(sp)
+ sw k0, PT_CONTEXT(sp) // 0x1c
mfc0 k0, CP0_PAGEMASK
- sw k0, 0x18(sp)
+ sw k0, PT_PAGEMASK(sp) // 0x18
mfc0 k0, CP0_CONFIG
- sw k0, 0x14(sp)
+ sw k0, PT_CONFIG(sp) // 0x14
+
+ .set macro
+ .set at
+
+ li t0, SYS_SLPPWR
+ sw zero, 0(t0) /* Get the processor ready to sleep */
+ sync
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
+ * sys_scratch0 : SP
+ * sys_scratch1 : RA
+ */
+ li t0, SYS_SCRATCH0
+ li t1, SYS_SCRATCH1
+ sw sp, 0(t0)
+ la k0, resume_from_sleep
+ sw k0, 0(t1)
+
+/*
+ * Flush DCACHE to make sure context is in memory
*/
- la k0, 1f
- lui k1, 0xb190
- ori k1, 0x18
- sw sp, 0(k1)
- ori k1, 0x1c
- sw k0, 0(k1)
+ la t1,___flush_cache_all /* _flush_cache_all is a function pointer */
+ lw t0,0(t1)
+ jal t0
+ nop
/* Put SDRAM into self refresh. Preload instructions into cache,
* issue a precharge, then auto refresh, then sleep commands to it.
@@ -88,30 +126,65 @@ LEAF(save_and_sleep)
cache 0x14, 96(t0)
.set mips0
+ /* Put SDRAM to sleep */
sdsleep:
- lui k0, 0xb400
- sw zero, 0x001c(k0) /* Precharge */
- sw zero, 0x0020(k0) /* Auto refresh */
- sw zero, 0x0030(k0) /* SDRAM sleep */
+ li a0, MEM_PHYS_ADDR
+ or a0, a0, 0xA0000000
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500)
+ lw k0, MEM_SDMODE0(a0)
+ sw zero, MEM_SDPRECMD(a0) /* Precharge */
+ sw zero, MEM_SDAUTOREF(a0) /* Auto Refresh */
+ sw zero, MEM_SDSLEEP(a0) /* Sleep */
sync
-
- lui k1, 0xb190
- sw zero, 0x0078(k1) /* get ready to sleep */
+#endif
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ sw zero, MEM_SDPRECMD(a0) /* Precharge */
+ sw zero, MEM_SDSREF(a0)
+
+ #lw t0, MEM_SDSTAT(a0)
+ #and t0, t0, 0x01000000
+ li t0, 0x01000000
+refresh_not_set:
+ lw t1, MEM_SDSTAT(a0)
+ and t2, t1, t0
+ beq zero, t2, refresh_not_set
+ nop
+
+ li t0, ~0x30000000
+ lw t1, MEM_SDCONFIGA(a0)
+ and t1, t0, t1
+ sw t1, MEM_SDCONFIGA(a0)
sync
- sw zero, 0x007c(k1) /* Put processor to sleep */
+#endif
+
+ li t0, SYS_SLEEP
+ sw zero, 0(t0) /* Put processor to sleep */
sync
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
-1: nop
- lw k0, 0x20(sp)
+resume_from_sleep:
+ nop
+ .set nomacro
+ .set noat
+
+ lw k0, PT_C0STATUS(sp) // 0x20
mtc0 k0, CP0_STATUS
- lw k0, 0x1c(sp)
+ lw k0, PT_CONTEXT(sp) // 0x1c
mtc0 k0, CP0_CONTEXT
- lw k0, 0x18(sp)
+ lw k0, PT_PAGEMASK(sp) // 0x18
mtc0 k0, CP0_PAGEMASK
- lw k0, 0x14(sp)
+ lw k0, PT_CONFIG(sp) // 0x14
mtc0 k0, CP0_CONFIG
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
@@ -120,14 +193,6 @@ sdsleep:
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
- lw $8, PT_R8(sp)
- lw $9, PT_R9(sp)
- lw $10, PT_R10(sp)
- lw $11, PT_R11(sp)
- lw $12, PT_R12(sp)
- lw $13, PT_R13(sp)
- lw $14, PT_R14(sp)
- lw $15, PT_R15(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
@@ -136,15 +201,36 @@ sdsleep:
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
- lw $24, PT_R24(sp)
- lw $25, PT_R25(sp)
- lw $26, PT_R26(sp)
- lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
- lw $29, PT_R29(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
+
+ .set macro
+ .set at
+
+ /* clear the wake source, but save it as the return value of the function */
+ li t0, SYS_WAKESRC
+ lw v0, 0(t0)
+ sw v0, PT_R2(sp)
+ sw zero, 0(t0)
+
addiu sp, PT_SIZE
+ lw gp, save_and_sleep_frmsz-44(sp)
+ lw s8, save_and_sleep_frmsz-40(sp)
+ lw s7, save_and_sleep_frmsz-36(sp)
+ lw s6, save_and_sleep_frmsz-32(sp)
+ lw s5, save_and_sleep_frmsz-28(sp)
+ lw s4, save_and_sleep_frmsz-24(sp)
+ lw s3, save_and_sleep_frmsz-20(sp)
+ lw s2, save_and_sleep_frmsz-16(sp)
+ lw s1, save_and_sleep_frmsz-12(sp)
+ lw s0, save_and_sleep_frmsz-8(sp)
+ lw ra, save_and_sleep_frmsz-4(sp)
+
+ addu sp, save_and_sleep_frmsz
jr ra
+ nop
+ .set reorder
END(save_and_sleep)
+
Index: linux-2.4.35.4/arch/mips/au1000/common/time.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/common/time.c
+++ linux-2.4.35.4/arch/mips/au1000/common/time.c
@@ -50,7 +50,6 @@
#include <linux/mc146818rtc.h>
#include <linux/timex.h>
-extern void startup_match20_interrupt(void);
extern void do_softirq(void);
extern volatile unsigned long wall_jiffies;
unsigned long missed_heart_beats = 0;
@@ -59,14 +58,14 @@ static unsigned long r4k_offset; /* Amou
static unsigned long r4k_cur; /* What counter should be at next timer irq */
extern rwlock_t xtime_lock;
int no_au1xxx_32khz;
-void (*au1k_wait_ptr)(void);
+extern int allow_au1k_wait; /* default off for CP0 Counter */
/* Cycle counter value at the previous timer interrupt.. */
static unsigned int timerhi = 0, timerlo = 0;
#ifdef CONFIG_PM
#define MATCH20_INC 328
-extern void startup_match20_interrupt(void);
+extern void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *));
static unsigned long last_pc0, last_match20;
#endif
@@ -385,7 +384,6 @@ void __init au1xxx_timer_setup(void)
{
unsigned int est_freq;
extern unsigned long (*do_gettimeoffset)(void);
- extern void au1k_wait(void);
printk("calculating r4koff... ");
r4k_offset = cal_r4koff();
@@ -437,9 +435,6 @@ void __init au1xxx_timer_setup(void)
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
- au_writel(~0, SYS_WAKESRC);
- au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
/* setup match20 to interrupt once every 10ms */
@@ -447,13 +442,13 @@ void __init au1xxx_timer_setup(void)
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- startup_match20_interrupt();
+ startup_match20_interrupt(counter0_irq);
do_gettimeoffset = do_fast_pm_gettimeoffset;
/* We can use the real 'wait' instruction.
*/
- au1k_wait_ptr = au1k_wait;
+ allow_au1k_wait = 1;
}
#else
Index: linux-2.4.35.4/arch/mips/au1000/db1x00/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/db1x00/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/db1x00/board_setup.c
@@ -46,10 +46,22 @@
#include <asm/au1000.h>
#include <asm/db1x00.h>
-extern struct rtc_ops no_rtc_ops;
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550)
+#include <asm/au1xxx_dbdma.h>
+extern struct ide_ops *ide_ops;
+extern struct ide_ops au1xxx_ide_ops;
+extern u32 au1xxx_ide_virtbase;
+extern u64 au1xxx_ide_physbase;
+extern int au1xxx_ide_irq;
+
+/* Ddma */
+chan_tab_t *ide_read_ch, *ide_write_ch;
+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
+
+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
-/* not correct for db1550 */
-static BCSR * const bcsr = (BCSR *)0xAE000000;
+extern struct rtc_ops no_rtc_ops;
void board_reset (void)
{
@@ -57,6 +69,13 @@ void board_reset (void)
au_writel(0x00000000, 0xAE00001C);
}
+void board_power_off (void)
+{
+#ifdef CONFIG_MIPS_MIRAGE
+ au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
+#endif
+}
+
void __init board_setup(void)
{
u32 pin_func;
@@ -108,8 +127,42 @@ void __init board_setup(void)
au_writel(0x02000200, GPIO2_OUTPUT);
#endif
+#if defined(CONFIG_AU1XXX_SMC91111)
+#define CPLD_CONTROL (0xAF00000C)
+ {
+ extern uint32_t au1xxx_smc91111_base;
+ extern unsigned int au1xxx_smc91111_irq;
+ extern int au1xxx_smc91111_nowait;
+
+ au1xxx_smc91111_base = 0xAC000300;
+ au1xxx_smc91111_irq = AU1000_GPIO_8;
+ au1xxx_smc91111_nowait = 1;
+
+ /* set up the Static Bus timing - only 396Mhz */
+ bcsr->resets |= 0x7;
+ au_writel(0x00010003, MEM_STCFG0);
+ au_writel(0x000c00c0, MEM_STCFG2);
+ au_writel(0x85E1900D, MEM_STTIME2);
+ }
+#endif /* end CONFIG_SMC91111 */
au_sync();
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550)
+ /*
+ * Iniz IDE parameters
+ */
+ ide_ops = &au1xxx_ide_ops;
+ au1xxx_ide_irq = DAUGHTER_CARD_IRQ;
+ au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
+ au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
+
+ /*
+ * change PIO or PIO+Ddma
+ * check the GPIO-6 pin condition. db1550:s6_dot
+ */
+ switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0;
+#endif
+
#ifdef CONFIG_MIPS_DB1000
printk("AMD Alchemy Au1000/Db1000 Board\n");
#endif
Index: linux-2.4.35.4/arch/mips/au1000/db1x00/irqmap.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/db1x00/irqmap.c
+++ linux-2.4.35.4/arch/mips/au1000/db1x00/irqmap.c
@@ -53,6 +53,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
+ { AU1000_GPIO_8, INTC_INT_LOW_LEVEL, 0 }, // Daughtercard IRQ#
#else
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted#
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG#
Index: linux-2.4.35.4/arch/mips/au1000/db1x00/Makefile
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/db1x00/Makefile
+++ linux-2.4.35.4/arch/mips/au1000/db1x00/Makefile
@@ -17,4 +17,11 @@ O_TARGET := db1x00.o
obj-y := init.o board_setup.o irqmap.o
obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
+ifdef CONFIG_MIPS_DB1100
+ifdef CONFIG_MMC
+obj-y += mmc_support.o
+export-objs += mmc_support.o
+endif
+endif
+
include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/arch/mips/au1000/db1x00/mmc_support.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/db1x00/mmc_support.c
@@ -0,0 +1,126 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *
+ * MMC support routines for DB1100.
+ *
+ *
+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ * Contact: dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/irq.h>
+#include <asm/au1000.h>
+#include <asm/au1100_mmc.h>
+#include <asm/db1x00.h>
+
+
+/* SD/MMC controller support functions */
+
+/*
+ * Detect card.
+ */
+void mmc_card_inserted(int _n_, int *_res_)
+{
+ u32 gpios = au_readl(SYS_PINSTATERD);
+ u32 emptybit = (_n_) ? (1<<20) : (1<<19);
+ *_res_ = ((gpios & emptybit) == 0);
+}
+
+/*
+ * Check card write protection.
+ */
+void mmc_card_writable(int _n_, int *_res_)
+{
+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ unsigned long mmc_wp, board_specific;
+
+ if (_n_) {
+ mmc_wp = BCSR_BOARD_SD1_WP;
+ } else {
+ mmc_wp = BCSR_BOARD_SD0_WP;
+ }
+
+ board_specific = au_readl((unsigned long)(&bcsr->specific));
+
+ if (!(board_specific & mmc_wp)) {/* low means card writable */
+ *_res_ = 1;
+ } else {
+ *_res_ = 0;
+ }
+}
+
+/*
+ * Apply power to card slot.
+ */
+void mmc_power_on(int _n_)
+{
+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ unsigned long mmc_pwr, board_specific;
+
+ if (_n_) {
+ mmc_pwr = BCSR_BOARD_SD1_PWR;
+ } else {
+ mmc_pwr = BCSR_BOARD_SD0_PWR;
+ }
+
+ board_specific = au_readl((unsigned long)(&bcsr->specific));
+ board_specific |= mmc_pwr;
+
+ au_writel(board_specific, (int)(&bcsr->specific));
+ au_sync_delay(1);
+}
+
+/*
+ * Remove power from card slot.
+ */
+void mmc_power_off(int _n_)
+{
+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ unsigned long mmc_pwr, board_specific;
+
+ if (_n_) {
+ mmc_pwr = BCSR_BOARD_SD1_PWR;
+ } else {
+ mmc_pwr = BCSR_BOARD_SD0_PWR;
+ }
+
+ board_specific = au_readl((unsigned long)(&bcsr->specific));
+ board_specific &= ~mmc_pwr;
+
+ au_writel(board_specific, (int)(&bcsr->specific));
+ au_sync_delay(1);
+}
+
+EXPORT_SYMBOL(mmc_card_inserted);
+EXPORT_SYMBOL(mmc_card_writable);
+EXPORT_SYMBOL(mmc_power_on);
+EXPORT_SYMBOL(mmc_power_off);
+
Index: linux-2.4.35.4/arch/mips/au1000/ficmmp/au1200_ibutton.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/ficmmp/au1200_ibutton.c
@@ -0,0 +1,270 @@
+/* ----------------------------------------------------------------------
+ * mtwilson_keys.c
+ *
+ * Copyright (C) 2003 Intrinsyc Software Inc.
+ *
+ * Intel Personal Media Player buttons
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * May 02, 2003 : Initial version [FB]
+ *
+ ------------------------------------------------------------------------*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+
+#include <asm/au1000.h>
+#include <asm/uaccess.h>
+#include <asm/au1xxx_gpio.h>
+#include <asm/irq.h>
+#include <asm/keyboard.h>
+#include <linux/time.h>
+
+#define DRIVER_VERSION "V1.0"
+#define DRIVER_AUTHOR "FIC"
+#define DRIVER_DESC "FIC Travis Media Player Button Driver"
+#define DRIVER_NAME "Au1200Button"
+
+#define BUTTON_MAIN (1<<1)
+#define BUTTON_SELECT (1<<6)
+#define BUTTON_GUIDE (1<<12)
+#define BUTTON_DOWN (1<<17)
+#define BUTTON_LEFT (1<<19)
+#define BUTTON_RIGHT (1<<26)
+#define BUTTON_UP (1<<28)
+
+#define BUTTON_MASK (\
+ BUTTON_MAIN \
+ | BUTTON_SELECT \
+ | BUTTON_GUIDE \
+ | BUTTON_DOWN \
+ | BUTTON_LEFT \
+ | BUTTON_RIGHT \
+ | BUTTON_UP \
+ )
+
+#define BUTTON_INVERT (\
+ BUTTON_MAIN \
+ | 0 \
+ | BUTTON_GUIDE \
+ | 0 \
+ | 0 \
+ | 0 \
+ | 0 \
+ )
+
+char button_map[32]={0,KEY_S,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
+//char button_map[32]={0,0,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
+
+//char button_map[32]={0,KEY_TAB,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
+//char button_map[32]={0,0,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0};
+
+#define BUTTON_COUNT (sizeof (button_map) / sizeof (button_map[0]))
+
+struct input_dev dev;
+struct timeval cur_tv;
+
+static unsigned int old_tv_usec = 0;
+
+static unsigned int read_button_state(void)
+{
+ unsigned int state;
+
+ state = au_readl(SYS_PINSTATERD) & BUTTON_MASK; /* get gpio status */
+
+ state ^= BUTTON_INVERT; /* invert main & guide button */
+
+ /* printk("au1200_ibutton.c: button state [0x%X]\r\n",state); */
+ return state;
+}
+
+//This function returns 0 if the allowed microseconds have elapsed since the last call to ths function, otherwise it returns 1 to indicate a bounce condition
+static unsigned int bounce()
+{
+
+ unsigned int elapsed_time;
+
+ do_gettimeofday (&cur_tv);
+
+ if (!old_tv_usec) {
+ old_tv_usec = cur_tv.tv_usec;
+ return 0;
+ }
+
+ if(cur_tv.tv_usec > old_tv_usec) {
+ /* If there hasn't been rollover */
+ elapsed_time = ((cur_tv.tv_usec - old_tv_usec));
+ }
+ else {
+ /* Accounting for rollover */
+ elapsed_time = ((1000000 - old_tv_usec + cur_tv.tv_usec));
+ }
+
+ if (elapsed_time > 250000) {
+ old_tv_usec = 0; /* reset the bounce time */
+ return 0;
+ }
+
+ return 1;
+}
+
+/* button interrupt handler */
+static void button_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+
+ unsigned int i,bit_mask, key_choice;
+ u32 button_state;
+
+ /* Report state to upper level */
+
+ button_state = read_button_state() & BUTTON_MASK; /* get new gpio status */
+
+ /* Return if this is a repeated (bouncing) event */
+ if(bounce())
+ return;
+
+ /* we want to make keystrokes */
+ for( i=0; i< BUTTON_COUNT; i++) {
+ bit_mask = 1<<i;
+ if (button_state & bit_mask) {
+ key_choice = button_map[i];
+ /* toggle key down */
+ input_report_key(dev, key_choice, 1);
+ /* toggle key up */
+ input_report_key(dev, key_choice, 0);
+ printk("ibutton gpio %d stat %x scan code %d\r\n",
+ i, button_state, key_choice);
+ /* Only report the first key event; it doesn't make
+ * sense for two keys to be pressed at the same time,
+ * and causes problems with the directional keys
+ * return;
+ */
+ }
+ }
+}
+
+static int
+button_translate(unsigned char scancode, unsigned char *keycode, char raw_mode)
+{
+ static int prev_scancode;
+
+ printk( "ibutton.c: translate: scancode=%x raw_mode=%x\n",
+ scancode, raw_mode);
+
+ if (scancode == 0xe0 || scancode == 0xe1) {
+ prev_scancode = scancode;
+ return 0;
+ }
+
+ if (scancode == 0x00 || scancode == 0xff) {
+ prev_scancode = 0;
+ return 0;
+ }
+
+ *keycode = scancode;
+
+ return 1;
+}
+
+/* init button hardware */
+static int button_hw_init(void)
+{
+ unsigned int ipinfunc=0;
+
+ printk("au1200_ibutton.c: Initializing buttons hardware\n");
+
+ // initialize GPIO pin function assignments
+
+ ipinfunc = au_readl(SYS_PINFUNC);
+
+ ipinfunc &= ~(SYS_PINFUNC_DMA | SYS_PINFUNC_S0A | SYS_PINFUNC_S0B);
+ au_writel( ipinfunc ,SYS_PINFUNC);
+
+ ipinfunc |= (SYS_PINFUNC_S0C);
+ au_writel( ipinfunc ,SYS_PINFUNC);
+
+ return 0;
+}
+
+/* button driver init */
+static int __init button_init(void)
+{
+ int ret, i;
+ unsigned int flag=0;
+
+ printk("au1200_ibutton.c: button_init()\r\n");
+
+ button_hw_init();
+
+ /* register all button irq handler */
+
+ for(i=0; i< sizeof(button_map)/sizeof(button_map[0]); i++)
+ {
+ /* register irq <-- gpio 1 ,6 ,12 , 17 ,19 , 26 ,28 */
+ if(button_map[i] != 0)
+ {
+ ret = request_irq(AU1000_GPIO_0 + i ,
+ &button_interrupt , SA_INTERRUPT ,
+ DRIVER_NAME , &dev);
+ if(ret) flag |= 1<<i;
+ }
+ }
+
+ printk("au1200_ibutton.c: request_irq,ret:0x%x\r\n",ret);
+
+ if (ret) {
+ printk("au1200_ibutton.c: request_irq:%X failed\r\n",flag);
+ return ret;
+ }
+
+ dev.name = DRIVER_NAME;
+ dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+
+ for (i=0;i<sizeof(button_map)/sizeof(button_map[0]);i++)
+ {
+ dev.keybit[LONG(button_map[i])] |= BIT(button_map[i]);
+ }
+
+ input_register_device(&dev);
+
+ /* ready to receive interrupts */
+
+ return 0;
+}
+
+/* button driver exit */
+static void __exit button_exit(void)
+{
+ int i;
+
+ for(i=0;i<sizeof(button_map)/sizeof(button_map[0]);i++)
+ {
+ if(button_map[i] != 0)
+ {
+ free_irq( AU1000_GPIO_0 + i, &dev);
+ }
+ }
+
+ input_unregister_device(&dev);
+
+ printk("au1200_ibutton.c: button_exit()\r\n");
+}
+
+module_init(button_init);
+module_exit(button_exit);
+
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/arch/mips/au1000/ficmmp/au1xxx_dock.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/ficmmp/au1xxx_dock.c
@@ -0,0 +1,261 @@
+/*
+ * Copyright (C) 2003 Metrowerks, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <asm/au1000.h>
+#include <asm/uaccess.h>
+#include <asm/au1xxx_gpio.h>
+
+
+#if defined(CONFIG_MIPS_FICMMP)
+ #define DOCK_GPIO 215
+#else
+ #error Unsupported Au1xxx Platform
+#endif
+
+#define MAKE_FLAG 0x20
+
+#undef DEBUG
+
+#define DEBUG 0
+//#define DEBUG 1
+
+#if DEBUG
+#define DPRINTK(format, args...) printk(__FUNCTION__ ": " format, ## args)
+#else
+#define DPRINTK(format, args...) do { } while (0)
+#endif
+
+/* Please note that this driver is based on a timer and is not interrupt
+ * driven. If you are going to make use of this driver, you will need to have
+ * your application open the dock listing from the /dev directory first.
+ */
+
+struct au1xxx_dock {
+ struct fasync_struct *fasync;
+ wait_queue_head_t read_wait;
+ int open_count;
+ unsigned int debounce;
+ unsigned int current;
+ unsigned int last;
+};
+
+static struct au1xxx_dock dock_info;
+
+
+static void dock_timer_periodic(void *data);
+
+static struct tq_struct dock_task = {
+ routine: dock_timer_periodic,
+ data: NULL
+};
+
+static int cleanup_flag = 0;
+static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue);
+
+
+static unsigned int read_dock_state(void)
+{
+ u32 state;
+
+ state = au1xxx_gpio_read(DOCK_GPIO);
+
+ /* printk( "Current Dock State: %d\n", state ); */
+
+ return state;
+}
+
+
+static void dock_timer_periodic(void *data)
+{
+ struct au1xxx_dock *dock = (struct au1xxx_dock *)data;
+ unsigned long dock_state;
+
+ /* If cleanup wants us to die */
+ if (cleanup_flag) {
+ /* now cleanup_module can return */
+ wake_up(&cleanup_wait_queue);
+ } else {
+ /* put ourselves back in the task queue */
+ queue_task(&dock_task, &tq_timer);
+ }
+
+ /* read current dock */
+ dock_state = read_dock_state();
+
+ /* if dock states hasn't changed */
+ /* save time and be done. */
+ if (dock_state == dock->current) {
+ return;
+ }
+
+ if (dock_state == dock->debounce) {
+ dock->current = dock_state;
+ } else {
+ dock->debounce = dock_state;
+ }
+ if (dock->current != dock->last) {
+ if (waitqueue_active(&dock->read_wait)) {
+ wake_up_interruptible(&dock->read_wait);
+ }
+ }
+}
+
+
+static ssize_t au1xxx_dock_read(struct file *filp, char *buffer, size_t count, loff_t *ppos)
+{
+ struct au1xxx_dock *dock = filp->private_data;
+ char event[3];
+ int last;
+ int cur;
+ int err;
+
+try_again:
+
+ while (dock->current == dock->last) {
+ if (filp->f_flags & O_NONBLOCK) {
+ return -EAGAIN;
+ }
+ interruptible_sleep_on(&dock->read_wait);
+ if (signal_pending(current)) {
+ return -ERESTARTSYS;
+ }
+ }
+
+ cur = dock->current;
+ last = dock->last;
+
+ if(cur != last)
+ {
+ event[0] = cur ? 'D' : 'U';
+ event[1] = '\r';
+ event[2] = '\n';
+ }
+ else
+ goto try_again;
+
+ dock->last = cur;
+ err = copy_to_user(buffer, &event, 3);
+ if (err) {
+ return err;
+ }
+
+ return 3;
+}
+
+
+static int au1xxx_dock_open(struct inode *inode, struct file *filp)
+{
+ struct au1xxx_dock *dock = &dock_info;
+
+ MOD_INC_USE_COUNT;
+
+ filp->private_data = dock;
+
+ if (dock->open_count++ == 0) {
+ dock_task.data = dock;
+ cleanup_flag = 0;
+ queue_task(&dock_task, &tq_timer);
+ }
+
+ return 0;
+}
+
+
+static unsigned int au1xxx_dock_poll(struct file *filp, poll_table *wait)
+{
+ struct au1xxx_dock *dock = filp->private_data;
+ int ret = 0;
+
+ DPRINTK("start\n");
+ poll_wait(filp, &dock->read_wait, wait);
+ if (dock->current != dock->last) {
+ ret = POLLIN | POLLRDNORM;
+ }
+ return ret;
+}
+
+
+static int au1xxx_dock_release(struct inode *inode, struct file *filp)
+{
+ struct au1xxx_dock *dock = filp->private_data;
+
+ DPRINTK("start\n");
+
+ if (--dock->open_count == 0) {
+ cleanup_flag = 1;
+ sleep_on(&cleanup_wait_queue);
+ }
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+
+
+static struct file_operations au1xxx_dock_fops = {
+ owner: THIS_MODULE,
+ read: au1xxx_dock_read,
+ poll: au1xxx_dock_poll,
+ open: au1xxx_dock_open,
+ release: au1xxx_dock_release,
+};
+
+/*
+ * The au1xxx dock is a misc device:
+ * Major 10 char
+ * Minor 22 /dev/dock
+ *
+ * This is /dev/misc/dock if devfs is used.
+ */
+
+static struct miscdevice au1xxx_dock_dev = {
+ minor: 23,
+ name: "dock",
+ fops: &au1xxx_dock_fops,
+};
+
+static int __init au1xxx_dock_init(void)
+{
+ struct au1xxx_dock *dock = &dock_info;
+ int ret;
+
+ DPRINTK("Initializing dock driver\n");
+ dock->open_count = 0;
+ cleanup_flag = 0;
+ init_waitqueue_head(&dock->read_wait);
+
+
+ /* yamon configures GPIO pins for the dock
+ * no initialization needed
+ */
+
+ ret = misc_register(&au1xxx_dock_dev);
+
+ DPRINTK("dock driver fully initialized.\n");
+
+ return ret;
+}
+
+
+static void __exit au1xxx_dock_exit(void)
+{
+ DPRINTK("unloading dock driver\n");
+ misc_deregister(&au1xxx_dock_dev);
+}
+
+
+module_init(au1xxx_dock_init);
+module_exit(au1xxx_dock_exit);
Index: linux-2.4.35.4/arch/mips/au1000/ficmmp/board_setup.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/ficmmp/board_setup.c
@@ -0,0 +1,226 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Alchemy Pb1200 board setup.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/keyboard.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/au1000.h>
+#include <asm/ficmmp.h>
+#include <asm/au1xxx_dbdma.h>
+#include <asm/au1xxx_gpio.h>
+
+extern struct rtc_ops no_rtc_ops;
+
+/* value currently in the board configuration register */
+u16 ficmmp_config = 0;
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+extern struct ide_ops *ide_ops;
+extern struct ide_ops au1xxx_ide_ops;
+extern u32 au1xxx_ide_virtbase;
+extern u64 au1xxx_ide_physbase;
+extern int au1xxx_ide_irq;
+
+u32 led_base_addr;
+/* Ddma */
+chan_tab_t *ide_read_ch, *ide_write_ch;
+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
+
+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
+
+void board_reset (void)
+{
+ au_writel(0, 0xAD80001C);
+}
+
+void board_power_off (void)
+{
+}
+
+void __init board_setup(void)
+{
+ char *argptr = NULL;
+ u32 pin_func;
+ rtc_ops = &no_rtc_ops;
+
+ ficmmp_config_init(); //Initialize FIC control register
+
+#if 0
+ /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_sync();
+#endif
+
+#if defined( CONFIG_I2C_ALGO_AU1550 )
+ {
+ u32 freq0, clksrc;
+
+ /* Select SMBUS in CPLD */
+ /* bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); */
+
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(3<<17 | 1<<4);
+ /* Set GPIOs correctly */
+ pin_func |= 2<<17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The i2c driver depends on 50Mhz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+ /* 396Mhz / (3+1)*2 == 49.5Mhz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~0x01f00000;
+ /* bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= (0x3 << 22);
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1200
+ argptr = prom_getcmdline();
+ strcat(argptr, " video=au1200fb:");
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+ /*
+ * Iniz IDE parameters
+ */
+ ide_ops = &au1xxx_ide_ops;
+ au1xxx_ide_irq = FICMMP_IDE_INT;
+ au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
+ au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
+ switch4ddma = 0;
+ /*
+ ide_ops = &au1xxx_ide_ops;
+ au1xxx_ide_irq = FICMMP_IDE_INT;
+ au1xxx_ide_base = KSEG1ADDR(AU1XXX_ATA_BASE);
+ */
+ au1xxx_gpio_write(9, 1);
+ printk("B4001010: %X\n", *((u32*)0xB4001010));
+ printk("B4001014: %X\n", *((u32*)0xB4001014));
+ printk("B4001018: %X\n", *((u32*)0xB4001018));
+ printk("B1900100: %X\n", *((u32*)0xB1900100));
+
+#if 0
+ ficmmp_config_clear(FICMMP_CONFIG_IDERST);
+ mdelay(100);
+ ficmmp_config_set(FICMMP_CONFIG_IDERST);
+ mdelay(100);
+#endif
+ /*
+ * change PIO or PIO+Ddma
+ * check the GPIO-5 pin condition. pb1200:s18_dot
+ */
+/* switch4ddma = 0; //(au_readl(SYS_PINSTATERD) & (1 << 5)) ? 1 : 0; */
+#endif
+
+ /* The Pb1200 development board uses external MUX for PSC0 to
+ support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
+#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550)
+ #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+ Refer to Pb1200 documentation.
+#elif defined( CONFIG_AU1550_PSC_SPI )
+ //bcsr->resets |= BCSR_RESETS_PCS0MUX;
+#elif defined( CONFIG_I2C_ALGO_AU1550 )
+ //bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+ au_sync();
+
+ printk("FIC Multimedia Player Board\n");
+ au1xxx_gpio_tristate(5);
+ printk("B1900100: %X\n", *((volatile u32*)0xB1900100));
+ printk("B190002C: %X\n", *((volatile u32*)0xB190002C));
+}
+
+int
+board_au1200fb_panel (void)
+{
+ au1xxx_gpio_tristate(6);
+
+ if (au1xxx_gpio_read(12) == 0)
+ return 9; /* FS453_640x480 (Composite/S-Video) */
+ else
+ return 7; /* Sharp 320x240 TFT */
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+ /*Enable data buffers*/
+ ficmmp_config_clear(FICMMP_CONFIG_LCMDATAOUT);
+ /*Take LCD out of reset*/
+ ficmmp_config_set(FICMMP_CONFIG_LCMPWREN | FICMMP_CONFIG_LCMEN);
+ return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+ /*Disable data buffers*/
+ ficmmp_config_set(FICMMP_CONFIG_LCMDATAOUT);
+ /*Put LCD in reset, remove power*/
+ ficmmp_config_clear(FICMMP_CONFIG_LCMEN | FICMMP_CONFIG_LCMPWREN);
+ return 0;
+}
+
Index: linux-2.4.35.4/arch/mips/au1000/ficmmp/init.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/ficmmp/init.c
@@ -0,0 +1,76 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PB1200 board setup
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "FIC Multimedia Player (Au1200)";
+}
+
+u32 mae_memsize = 0;
+
+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = argc;
+ prom_argv = argv;
+ prom_envp = envp;
+
+ mips_machgroup = MACH_GROUP_ALCHEMY;
+ mips_machtype = MACH_PB1000; /* set the platform # */
+ prom_init_cmdline();
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ memsize = 0x08000000;
+ } else {
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+
+ /* reserved 32MB for MAE driver */
+ memsize -= (32 * 1024 * 1024);
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+ mae_memsize = memsize; /* for drivers/char/au1xxx_mae.c */
+ return 0;
+}
+
Index: linux-2.4.35.4/arch/mips/au1000/ficmmp/irqmap.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/ficmmp/irqmap.c
@@ -0,0 +1,61 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1xxx irq map table
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/au1000.h>
+#include <asm/ficmmp.h>
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+ { FICMMP_IDE_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1XXX_SMC91111_IRQ, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_GPIO_1 , INTC_INT_FALL_EDGE, 0 }, // main button
+ { AU1000_GPIO_6 , INTC_INT_RISE_EDGE, 0 }, // select button
+ { AU1000_GPIO_12, INTC_INT_FALL_EDGE, 0 }, // guide button
+ { AU1000_GPIO_17, INTC_INT_RISE_EDGE, 0 }, // down button
+ { AU1000_GPIO_19, INTC_INT_RISE_EDGE, 0 }, // left button
+ { AU1000_GPIO_26, INTC_INT_RISE_EDGE, 0 }, // right button
+ { AU1000_GPIO_28, INTC_INT_RISE_EDGE, 0 }, // up button
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
Index: linux-2.4.35.4/arch/mips/au1000/ficmmp/Makefile
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/ficmmp/Makefile
@@ -0,0 +1,25 @@
+#
+# Copyright 2000 MontaVista Software Inc.
+# Author: MontaVista Software, Inc.
+# ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor FIC board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+USE_STANDARD_AS_RULE := true
+
+O_TARGET := ficmmp.o
+
+obj-y := init.o board_setup.o irqmap.o au1200_ibutton.o au1xxx_dock.o
+
+ifdef CONFIG_MMC
+obj-y += mmc_support.o
+export-objs +=mmc_support.o
+endif
+
+
+include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/arch/mips/au1000/hydrogen3/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/hydrogen3/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/hydrogen3/board_setup.c
@@ -51,12 +51,19 @@ void board_reset (void)
{
}
+void board_power_off (void)
+{
+}
+
void __init board_setup(void)
{
u32 pin_func;
rtc_ops = &no_rtc_ops;
+ /* Set GPIO14 high to make CD/DAT1 high for MMC to work */
+ au_writel(1<<14, SYS_OUTPUTSET);
+
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
Index: linux-2.4.35.4/arch/mips/au1000/hydrogen3/buttons.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/hydrogen3/buttons.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (C) 2003 Metrowerks, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <asm/au1000.h>
+#include <asm/uaccess.h>
+
+#define BUTTON_SELECT (1<<1)
+#define BUTTON_1 (1<<2)
+#define BUTTON_2 (1<<3)
+#define BUTTON_ONOFF (1<<6)
+#define BUTTON_3 (1<<7)
+#define BUTTON_4 (1<<8)
+#define BUTTON_LEFT (1<<9)
+#define BUTTON_DOWN (1<<10)
+#define BUTTON_RIGHT (1<<11)
+#define BUTTON_UP (1<<12)
+
+#define BUTTON_MASK (\
+ BUTTON_SELECT \
+ | BUTTON_1 \
+ | BUTTON_2 \
+ | BUTTON_ONOFF \
+ | BUTTON_3 \
+ | BUTTON_4 \
+ | BUTTON_LEFT \
+ | BUTTON_DOWN \
+ | BUTTON_RIGHT \
+ | BUTTON_UP \
+ )
+
+#define BUTTON_INVERT (\
+ BUTTON_SELECT \
+ | BUTTON_1 \
+ | BUTTON_2 \
+ | BUTTON_3 \
+ | BUTTON_4 \
+ | BUTTON_LEFT \
+ | BUTTON_DOWN \
+ | BUTTON_RIGHT \
+ | BUTTON_UP \
+ )
+
+
+
+#define MAKE_FLAG 0x20
+
+#undef DEBUG
+
+#define DEBUG 0
+//#define DEBUG 1
+
+#if DEBUG
+#define DPRINTK(format, args...) printk(__FUNCTION__ ": " format, ## args)
+#else
+#define DPRINTK(format, args...) do { } while (0)
+#endif
+
+/* Please note that this driver is based on a timer and is not interrupt
+ * driven. If you are going to make use of this driver, you will need to have
+ * your application open the buttons listing from the /dev directory first.
+ */
+
+struct hydrogen3_buttons {
+ struct fasync_struct *fasync;
+ wait_queue_head_t read_wait;
+ int open_count;
+ unsigned int debounce;
+ unsigned int current;
+ unsigned int last;
+};
+
+static struct hydrogen3_buttons buttons_info;
+
+
+static void button_timer_periodic(void *data);
+
+static struct tq_struct button_task = {
+ routine: button_timer_periodic,
+ data: NULL
+};
+
+static int cleanup_flag = 0;
+static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue);
+
+
+static unsigned int read_button_state(void)
+{
+ unsigned long state;
+
+ state = inl(SYS_PINSTATERD) & BUTTON_MASK;
+ state ^= BUTTON_INVERT;
+
+ DPRINTK( "Current Button State: %d\n", state );
+
+ return state;
+}
+
+
+static void button_timer_periodic(void *data)
+{
+ struct hydrogen3_buttons *buttons = (struct hydrogen3_buttons *)data;
+ unsigned long button_state;
+
+ // If cleanup wants us to die
+ if (cleanup_flag) {
+ wake_up(&cleanup_wait_queue); // now cleanup_module can return
+ } else {
+ queue_task(&button_task, &tq_timer); // put ourselves back in the task queue
+ }
+
+ // read current buttons
+ button_state = read_button_state();
+
+ // if no buttons are down and nothing to do then
+ // save time and be done.
+ if ((button_state == 0) && (buttons->current == 0)) {
+ return;
+ }
+
+ if (button_state == buttons->debounce) {
+ buttons->current = button_state;
+ } else {
+ buttons->debounce = button_state;
+ }
+// printk("0x%04x\n", button_state);
+ if (buttons->current != buttons->last) {
+ if (waitqueue_active(&buttons->read_wait)) {
+ wake_up_interruptible(&buttons->read_wait);
+ }
+ }
+}
+
+
+static ssize_t hydrogen3_buttons_read(struct file *filp, char *buffer, size_t count, loff_t *ppos)
+{
+ struct hydrogen3_buttons *buttons = filp->private_data;
+ char events[16];
+ int index;
+ int last;
+ int cur;
+ int bit;
+ int bit_mask;
+ int err;
+
+ DPRINTK("start\n");
+
+try_again:
+
+ while (buttons->current == buttons->last) {
+ if (filp->f_flags & O_NONBLOCK) {
+ return -EAGAIN;
+ }
+ interruptible_sleep_on(&buttons->read_wait);
+ if (signal_pending(current)) {
+ return -ERESTARTSYS;
+ }
+ }
+
+ cur = buttons->current;
+ last = buttons->last;
+
+ index = 0;
+ bit_mask = 1;
+ for (bit = 0; (bit < 16) && count; bit++) {
+ if ((cur ^ last) & bit_mask) {
+ if (cur & bit_mask) {
+ events[index] = (bit | MAKE_FLAG) + 'A';
+ last |= bit_mask;
+ } else {
+ events[index] = bit + 'A';
+ last &= ~bit_mask;
+ }
+ index++;
+ count--;
+ }
+ bit_mask <<= 1;
+ }
+ buttons->last = last;
+
+ if (index == 0) {
+ goto try_again;
+ }
+
+ err = copy_to_user(buffer, events, index);
+ if (err) {
+ return err;
+ }
+
+ return index;
+}
+
+
+static int hydrogen3_buttons_open(struct inode *inode, struct file *filp)
+{
+ struct hydrogen3_buttons *buttons = &buttons_info;
+
+ DPRINTK("start\n");
+ MOD_INC_USE_COUNT;
+
+ filp->private_data = buttons;
+
+ if (buttons->open_count++ == 0) {
+ button_task.data = buttons;
+ cleanup_flag = 0;
+ queue_task(&button_task, &tq_timer);
+ }
+
+ return 0;
+}
+
+
+static unsigned int hydrogen3_buttons_poll(struct file *filp, poll_table *wait)
+{
+ struct hydrogen3_buttons *buttons = filp->private_data;
+ int ret = 0;
+
+ DPRINTK("start\n");
+ poll_wait(filp, &buttons->read_wait, wait);
+ if (buttons->current != buttons->last) {
+ ret = POLLIN | POLLRDNORM;
+ }
+ return ret;
+}
+
+
+static int hydrogen3_buttons_release(struct inode *inode, struct file *filp)
+{
+ struct hydrogen3_buttons *buttons = filp->private_data;
+
+ DPRINTK("start\n");
+
+ if (--buttons->open_count == 0) {
+ cleanup_flag = 1;
+ sleep_on(&cleanup_wait_queue);
+ }
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+
+
+static struct file_operations hydrogen3_buttons_fops = {
+ owner: THIS_MODULE,
+ read: hydrogen3_buttons_read,
+ poll: hydrogen3_buttons_poll,
+ open: hydrogen3_buttons_open,
+ release: hydrogen3_buttons_release,
+};
+
+/*
+ * The hydrogen3 buttons is a misc device:
+ * Major 10 char
+ * Minor 22 /dev/buttons
+ *
+ * This is /dev/misc/buttons if devfs is used.
+ */
+
+static struct miscdevice hydrogen3_buttons_dev = {
+ minor: 22,
+ name: "buttons",
+ fops: &hydrogen3_buttons_fops,
+};
+
+static int __init hydrogen3_buttons_init(void)
+{
+ struct hydrogen3_buttons *buttons = &buttons_info;
+ int ret;
+
+ DPRINTK("Initializing buttons driver\n");
+ buttons->open_count = 0;
+ cleanup_flag = 0;
+ init_waitqueue_head(&buttons->read_wait);
+
+
+ // yamon configures GPIO pins for the buttons
+ // no initialization needed
+
+ ret = misc_register(&hydrogen3_buttons_dev);
+
+ DPRINTK("Buttons driver fully initialized.\n");
+
+ return ret;
+}
+
+
+static void __exit hydrogen3_buttons_exit(void)
+{
+ DPRINTK("unloading buttons driver\n");
+ misc_deregister(&hydrogen3_buttons_dev);
+}
+
+
+module_init(hydrogen3_buttons_init);
+module_exit(hydrogen3_buttons_exit);
Index: linux-2.4.35.4/arch/mips/au1000/hydrogen3/Makefile
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/hydrogen3/Makefile
+++ linux-2.4.35.4/arch/mips/au1000/hydrogen3/Makefile
@@ -14,6 +14,11 @@ USE_STANDARD_AS_RULE := true
O_TARGET := hydrogen3.o
-obj-y := init.o board_setup.o irqmap.o
+obj-y := init.o board_setup.o irqmap.o buttons.o
+
+ifdef CONFIG_MMC
+obj-y += mmc_support.o
+export-objs +=mmc_support.o
+endif
include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/arch/mips/au1000/hydrogen3/mmc_support.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/hydrogen3/mmc_support.c
@@ -0,0 +1,89 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *
+ * MMC support routines for Hydrogen3.
+ *
+ *
+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ * Contact: dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/irq.h>
+#include <asm/au1000.h>
+#include <asm/au1100_mmc.h>
+
+#define GPIO_17_WP 0x20000
+
+/* SD/MMC controller support functions */
+
+/*
+ * Detect card.
+ */
+void mmc_card_inserted(int _n_, int *_res_)
+{
+ u32 gpios = au_readl(SYS_PINSTATERD);
+ u32 emptybit = (1<<16);
+ *_res_ = ((gpios & emptybit) == 0);
+}
+
+/*
+ * Check card write protection.
+ */
+void mmc_card_writable(int _n_, int *_res_)
+{
+ unsigned long mmc_wp, board_specific;
+ board_specific = au_readl(SYS_OUTPUTSET);
+ mmc_wp=GPIO_17_WP;
+ if (!(board_specific & mmc_wp)) {/* low means card writable */
+ *_res_ = 1;
+ } else {
+ *_res_ = 0;
+ }
+}
+/*
+ * Apply power to card slot.
+ */
+void mmc_power_on(int _n_)
+{
+}
+
+/*
+ * Remove power from card slot.
+ */
+void mmc_power_off(int _n_)
+{
+}
+
+EXPORT_SYMBOL(mmc_card_inserted);
+EXPORT_SYMBOL(mmc_card_writable);
+EXPORT_SYMBOL(mmc_power_on);
+EXPORT_SYMBOL(mmc_power_off);
+
Index: linux-2.4.35.4/arch/mips/au1000/mtx-1/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/mtx-1/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/mtx-1/board_setup.c
@@ -48,6 +48,12 @@
extern struct rtc_ops no_rtc_ops;
+void board_reset (void)
+{
+ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ au_writel(0x00000000, 0xAE00001C);
+}
+
void __init board_setup(void)
{
rtc_ops = &no_rtc_ops;
Index: linux-2.4.35.4/arch/mips/au1000/mtx-1/irqmap.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/mtx-1/irqmap.c
+++ linux-2.4.35.4/arch/mips/au1000/mtx-1/irqmap.c
@@ -72,10 +72,10 @@ au1xxx_pci_irqmap(struct pci_dev *dev, u
* A B C D
*/
{
- {INTA, INTB, INTC, INTD}, /* IDSEL 0 */
- {INTA, INTB, INTC, INTD}, /* IDSEL 1 */
- {INTA, INTB, INTC, INTD}, /* IDSEL 2 */
- {INTA, INTB, INTC, INTD}, /* IDSEL 3 */
+ {INTA, INTB, INTX, INTX}, /* IDSEL 0 */
+ {INTB, INTA, INTX, INTX}, /* IDSEL 1 */
+ {INTC, INTD, INTX, INTX}, /* IDSEL 2 */
+ {INTD, INTC, INTX, INTX}, /* IDSEL 3 */
};
const long min_idsel = 0, max_idsel = 3, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
Index: linux-2.4.35.4/arch/mips/au1000/pb1000/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/pb1000/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/pb1000/board_setup.c
@@ -58,6 +58,10 @@ void board_reset (void)
{
}
+void board_power_off (void)
+{
+}
+
void __init board_setup(void)
{
u32 pin_func, static_cfg0;
Index: linux-2.4.35.4/arch/mips/au1000/pb1100/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/pb1100/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/pb1100/board_setup.c
@@ -62,6 +62,10 @@ void board_reset (void)
au_writel(0x00000000, 0xAE00001C);
}
+void board_power_off (void)
+{
+}
+
void __init board_setup(void)
{
u32 pin_func;
Index: linux-2.4.35.4/arch/mips/au1000/pb1100/Makefile
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/pb1100/Makefile
+++ linux-2.4.35.4/arch/mips/au1000/pb1100/Makefile
@@ -16,4 +16,10 @@ O_TARGET := pb1100.o
obj-y := init.o board_setup.o irqmap.o
+
+ifdef CONFIG_MMC
+obj-y += mmc_support.o
+export-objs += mmc_support.o
+endif
+
include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/arch/mips/au1000/pb1100/mmc_support.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/pb1100/mmc_support.c
@@ -0,0 +1,126 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *
+ * MMC support routines for PB1100.
+ *
+ *
+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ * Contact: dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/irq.h>
+#include <asm/au1000.h>
+#include <asm/au1100_mmc.h>
+#include <asm/pb1100.h>
+
+
+/* SD/MMC controller support functions */
+
+/*
+ * Detect card.
+ */
+void mmc_card_inserted(int _n_, int *_res_)
+{
+ u32 gpios = au_readl(SYS_PINSTATERD);
+ u32 emptybit = (_n_) ? (1<<15) : (1<<14);
+ *_res_ = ((gpios & emptybit) == 0);
+}
+
+/*
+ * Check card write protection.
+ */
+void mmc_card_writable(int _n_, int *_res_)
+{
+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ unsigned long mmc_wp, board_specific;
+
+ if (_n_) {
+ mmc_wp = BCSR_PCMCIA_SD1_WP;
+ } else {
+ mmc_wp = BCSR_PCMCIA_SD0_WP;
+ }
+
+ board_specific = au_readl((unsigned long)(&bcsr->pcmcia));
+
+ if (!(board_specific & mmc_wp)) {/* low means card writable */
+ *_res_ = 1;
+ } else {
+ *_res_ = 0;
+ }
+}
+
+/*
+ * Apply power to card slot.
+ */
+void mmc_power_on(int _n_)
+{
+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ unsigned long mmc_pwr, board_specific;
+
+ if (_n_) {
+ mmc_pwr = BCSR_PCMCIA_SD1_PWR;
+ } else {
+ mmc_pwr = BCSR_PCMCIA_SD0_PWR;
+ }
+
+ board_specific = au_readl((unsigned long)(&bcsr->pcmcia));
+ board_specific |= mmc_pwr;
+
+ au_writel(board_specific, (int)(&bcsr->pcmcia));
+ au_sync_delay(1);
+}
+
+/*
+ * Remove power from card slot.
+ */
+void mmc_power_off(int _n_)
+{
+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ unsigned long mmc_pwr, board_specific;
+
+ if (_n_) {
+ mmc_pwr = BCSR_PCMCIA_SD1_PWR;
+ } else {
+ mmc_pwr = BCSR_PCMCIA_SD0_PWR;
+ }
+
+ board_specific = au_readl((unsigned long)(&bcsr->pcmcia));
+ board_specific &= ~mmc_pwr;
+
+ au_writel(board_specific, (int)(&bcsr->pcmcia));
+ au_sync_delay(1);
+}
+
+EXPORT_SYMBOL(mmc_card_inserted);
+EXPORT_SYMBOL(mmc_card_writable);
+EXPORT_SYMBOL(mmc_power_on);
+EXPORT_SYMBOL(mmc_power_off);
+
Index: linux-2.4.35.4/arch/mips/au1000/pb1200/board_setup.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/pb1200/board_setup.c
@@ -0,0 +1,221 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Alchemy Pb1200 board setup.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/keyboard.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/au1000.h>
+#include <asm/au1xxx_dbdma.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/db1200.h>
+#define PB1200_ETH_INT DB1200_ETH_INT
+#define PB1200_IDE_INT DB1200_IDE_INT
+#endif
+
+extern struct rtc_ops no_rtc_ops;
+
+extern void _board_init_irq(void);
+extern void (*board_init_irq)(void);
+
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX
+extern struct ide_ops *ide_ops;
+extern struct ide_ops au1xxx_ide_ops;
+extern u32 au1xxx_ide_virtbase;
+extern u64 au1xxx_ide_physbase;
+extern int au1xxx_ide_irq;
+
+u32 led_base_addr;
+/* Ddma */
+chan_tab_t *ide_read_ch, *ide_write_ch;
+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
+
+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 };
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
+
+void board_reset (void)
+{
+ bcsr->resets = 0;
+}
+
+void board_power_off (void)
+{
+ bcsr->resets = 0xC000;
+}
+
+void __init board_setup(void)
+{
+ char *argptr = NULL;
+ u32 pin_func;
+ rtc_ops = &no_rtc_ops;
+
+#if 0
+ /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
+
+ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_sync();
+#endif
+
+#if defined( CONFIG_I2C_ALGO_AU1550 )
+ {
+ u32 freq0, clksrc;
+
+ /* Select SMBUS in CPLD */
+ bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(3<<17 | 1<<4);
+ /* Set GPIOs correctly */
+ pin_func |= 2<<17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
+
+ /* The i2c driver depends on 50Mhz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+ /* 396Mhz / (3+1)*2 == 49.5Mhz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~0x01f00000;
+ /* bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= (0x3 << 22);
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
+ }
+#endif
+
+#ifdef CONFIG_FB_AU1200
+ argptr = prom_getcmdline();
+ strcat(argptr, " video=au1200fb:");
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+ /*
+ * Iniz IDE parameters
+ */
+ ide_ops = &au1xxx_ide_ops;
+ au1xxx_ide_irq = PB1200_IDE_INT;
+ au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
+ au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
+ /*
+ * change PIO or PIO+Ddma
+ * check the GPIO-5 pin condition. pb1200:s18_dot */
+ switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 5)) ? 1 : 0;
+#endif
+
+ /* The Pb1200 development board uses external MUX for PSC0 to
+ support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
+#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550)
+ #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+ Refer to Pb1200/Db1200 documentation.
+#elif defined( CONFIG_AU1550_PSC_SPI )
+ bcsr->resets |= BCSR_RESETS_PCS0MUX;
+#elif defined( CONFIG_I2C_ALGO_AU1550 )
+ bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+ au_sync();
+
+#ifdef CONFIG_MIPS_PB1200
+ printk("AMD Alchemy Pb1200 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ printk("AMD Alchemy Db1200 Board\n");
+#endif
+
+ /* Setup Pb1200 External Interrupt Controller */
+ {
+ extern void (*board_init_irq)(void);
+ extern void _board_init_irq(void);
+ board_init_irq = _board_init_irq;
+ }
+}
+
+int
+board_au1200fb_panel (void)
+{
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ int p;
+
+ p = bcsr->switches;
+ p >>= 8;
+ p &= 0x0F;
+ return p;
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+ /* Apply power */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+ return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+ /* Remove power */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+ return 0;
+}
+
Index: linux-2.4.35.4/arch/mips/au1000/pb1200/init.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/pb1200/init.c
@@ -0,0 +1,72 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ * PB1200 board setup
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/config.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+ return "AMD Alchemy Au1200/Pb1200";
+}
+
+u32 mae_memsize = 0;
+
+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
+{
+ unsigned char *memsize_str;
+ unsigned long memsize;
+
+ prom_argc = argc;
+ prom_argv = argv;
+ prom_envp = envp;
+
+ mips_machgroup = MACH_GROUP_ALCHEMY;
+ mips_machtype = MACH_PB1000; /* set the platform # */
+ prom_init_cmdline();
+
+ memsize_str = prom_getenv("memsize");
+ if (!memsize_str) {
+ memsize = 0x08000000;
+ } else {
+ memsize = simple_strtol(memsize_str, NULL, 0);
+ }
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+ return 0;
+}
+
Index: linux-2.4.35.4/arch/mips/au1000/pb1200/irqmap.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/pb1200/irqmap.c
@@ -0,0 +1,180 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1xxx irq map table
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/au1000.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
+/*
+ * Support for External interrupts on the PbAu1200 Development platform.
+ */
+static volatile int pb1200_cascade_en=0;
+
+void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned short bisr = bcsr->int_status;
+ int extirq_nr = 0;
+
+ /* Clear all the edge interrupts. This has no effect on level */
+ bcsr->int_status = bisr;
+ for( ; bisr; bisr &= (bisr-1) )
+ {
+ extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+ /* Ack and dispatch IRQ */
+ do_IRQ(extirq_nr,regs);
+ }
+}
+
+inline void pb1200_enable_irq(unsigned int irq_nr)
+{
+ bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+inline void pb1200_disable_irq(unsigned int irq_nr)
+{
+ bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+{
+ if (++pb1200_cascade_en == 1)
+ {
+ request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler );
+#ifdef CONFIG_MIPS_PB1200
+ /* We have a problem with CPLD rev3. Enable a workaround */
+ if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
+ {
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+ printk("updated to latest revision. This software will not\n");
+ printk("work on anything less than CPLD rev4\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ printk("\nWARNING!!!\n");
+ while(1);
+ }
+#endif
+ }
+ pb1200_enable_irq(irq_nr);
+ return 0;
+}
+
+static void pb1200_shutdown_irq( unsigned int irq_nr )
+{
+ pb1200_disable_irq(irq_nr);
+ if (--pb1200_cascade_en == 0)
+ {
+ free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+ }
+ return;
+}
+
+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
+{
+ pb1200_disable_irq( irq_nr );
+}
+
+static void pb1200_end_irq(unsigned int irq_nr)
+{
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+ pb1200_enable_irq(irq_nr);
+ }
+}
+
+static struct hw_interrupt_type external_irq_type =
+{
+#ifdef CONFIG_MIPS_PB1200
+ "Pb1200 Ext",
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ "Db1200 Ext",
+#endif
+ pb1200_startup_irq,
+ pb1200_shutdown_irq,
+ pb1200_enable_irq,
+ pb1200_disable_irq,
+ pb1200_mask_and_ack_irq,
+ pb1200_end_irq,
+ NULL
+};
+
+void _board_init_irq(void)
+{
+ int irq_nr;
+
+ for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
+ {
+ irq_desc[irq_nr].handler = &external_irq_type;
+ pb1200_disable_irq(irq_nr);
+ }
+
+ /* GPIO_7 can not be hooked here, so it is hooked upon first
+ request of any source attached to the cascade */
+}
+
Index: linux-2.4.35.4/arch/mips/au1000/pb1200/Makefile
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/pb1200/Makefile
@@ -0,0 +1,25 @@
+#
+# Copyright 2000 MontaVista Software Inc.
+# Author: MontaVista Software, Inc.
+# ppopov@mvista.com or source@mvista.com
+#
+# Makefile for the Alchemy Semiconductor PB1000 board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+USE_STANDARD_AS_RULE := true
+
+O_TARGET := pb1200.o
+
+obj-y := init.o board_setup.o irqmap.o
+
+ifdef CONFIG_MMC
+obj-y += mmc_support.o
+export-objs +=mmc_support.o
+endif
+
+
+include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/arch/mips/au1000/pb1200/mmc_support.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/au1000/pb1200/mmc_support.c
@@ -0,0 +1,141 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *
+ * MMC support routines for PB1200.
+ *
+ *
+ * Copyright (c) 2003-2004 Embedded Edge, LLC.
+ * Author: Embedded Edge, LLC.
+ * Contact: dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/irq.h>
+#include <asm/au1000.h>
+#include <asm/au1100_mmc.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+/* NOTE: DB1200 only has SD0 pinned out and usable */
+#include <asm/db1200.h>
+#endif
+
+/* SD/MMC controller support functions */
+
+/*
+ * Detect card.
+ */
+void mmc_card_inserted(int socket, int *result)
+{
+ u16 mask;
+
+ if (socket)
+#ifdef CONFIG_MIPS_DB1200
+ mask = 0;
+#else
+ mask = BCSR_INT_SD1INSERT;
+#endif
+ else
+ mask = BCSR_INT_SD0INSERT;
+
+ *result = ((bcsr->sig_status & mask) != 0);
+}
+
+/*
+ * Check card write protection.
+ */
+void mmc_card_writable(int socket, int *result)
+{
+ u16 mask;
+
+ if (socket)
+#ifdef CONFIG_MIPS_DB1200
+ mask = 0;
+#else
+ mask = BCSR_STATUS_SD1WP;
+#endif
+ else
+ mask = BCSR_STATUS_SD0WP;
+
+ /* low means card writable */
+ if (!(bcsr->status & mask)) {
+ *result = 1;
+ } else {
+ *result = 0;
+ }
+}
+
+/*
+ * Apply power to card slot.
+ */
+void mmc_power_on(int socket)
+{
+ u16 mask;
+
+ if (socket)
+#ifdef CONFIG_MIPS_DB1200
+ mask = 0;
+#else
+ mask = BCSR_BOARD_SD1PWR;
+#endif
+ else
+ mask = BCSR_BOARD_SD0PWR;
+
+ bcsr->board |= mask;
+ au_sync_delay(1);
+}
+
+/*
+ * Remove power from card slot.
+ */
+void mmc_power_off(int socket)
+{
+ u16 mask;
+
+ if (socket)
+#ifdef CONFIG_MIPS_DB1200
+ mask = 0;
+#else
+ mask = BCSR_BOARD_SD1PWR;
+#endif
+ else
+ mask = BCSR_BOARD_SD0PWR;
+
+ bcsr->board &= ~mask;
+ au_sync_delay(1);
+}
+
+EXPORT_SYMBOL(mmc_card_inserted);
+EXPORT_SYMBOL(mmc_card_writable);
+EXPORT_SYMBOL(mmc_power_on);
+EXPORT_SYMBOL(mmc_power_off);
+
Index: linux-2.4.35.4/arch/mips/au1000/pb1500/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/pb1500/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/pb1500/board_setup.c
@@ -62,6 +62,10 @@ void board_reset (void)
au_writel(0x00000000, 0xAE00001C);
}
+void board_power_off (void)
+{
+}
+
void __init board_setup(void)
{
u32 pin_func;
Index: linux-2.4.35.4/arch/mips/au1000/pb1550/board_setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/pb1550/board_setup.c
+++ linux-2.4.35.4/arch/mips/au1000/pb1550/board_setup.c
@@ -48,12 +48,31 @@
extern struct rtc_ops no_rtc_ops;
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+extern struct ide_ops *ide_ops;
+extern struct ide_ops au1xxx_ide_ops;
+extern u32 au1xxx_ide_virtbase;
+extern u64 au1xxx_ide_physbase;
+extern unsigned int au1xxx_ide_irq;
+
+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma
+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */
+
void board_reset (void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
}
+void board_power_off (void)
+{
+ /* power off system */
+ printk("\n** Powering off Pb1550\n");
+ au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
+ au_sync();
+ while(1); /* should not get here */
+}
+
void __init board_setup(void)
{
u32 pin_func;
@@ -78,5 +97,36 @@ void __init board_setup(void)
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
+#if defined(CONFIG_AU1XXX_SMC91111)
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#error "Resource conflict occured. Disable either Ethernet or IDE daughter card."
+#else
+#define CPLD_CONTROL (0xAF00000C)
+ {
+ /* set up the Static Bus timing */
+ /* only 396Mhz */
+ /* reset the DC */
+ au_writew(au_readw(CPLD_CONTROL) | 0x0f, CPLD_CONTROL);
+ au_writel(0x00010003, MEM_STCFG0);
+ au_writel(0x000c00c0, MEM_STCFG2);
+ au_writel(0x85E1900D, MEM_STTIME2);
+ }
+#endif
+#endif /* end CONFIG_SMC91111 */
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+ /*
+ * Iniz IDE parameters
+ */
+ ide_ops = &au1xxx_ide_ops;
+ au1xxx_ide_irq = DAUGHTER_CARD_IRQ;;
+ au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR;
+ au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR);
+ /*
+ * change PIO or PIO+Ddma
+ * check the GPIO-6 pin condition. pb1550:s15_dot
+ */
+ switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0;
+#endif
printk("AMD Alchemy Pb1550 Board\n");
}
Index: linux-2.4.35.4/arch/mips/au1000/pb1550/irqmap.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/au1000/pb1550/irqmap.c
+++ linux-2.4.35.4/arch/mips/au1000/pb1550/irqmap.c
@@ -50,6 +50,9 @@
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
+#ifdef CONFIG_AU1XXX_SMC91111
+ { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
+#endif
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
Index: linux-2.4.35.4/arch/mips/config-shared.in
===================================================================
--- linux-2.4.35.4.orig/arch/mips/config-shared.in
+++ linux-2.4.35.4/arch/mips/config-shared.in
@@ -21,16 +21,19 @@ mainmenu_option next_comment
comment 'Machine selection'
dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL
dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32
+dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32
dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32
dep_bool 'Support for Alchemy Db1000 board' CONFIG_MIPS_DB1000 $CONFIG_MIPS32
dep_bool 'Support for Alchemy Db1100 board' CONFIG_MIPS_DB1100 $CONFIG_MIPS32
dep_bool 'Support for Alchemy Db1500 board' CONFIG_MIPS_DB1500 $CONFIG_MIPS32
dep_bool 'Support for Alchemy Db1550 board' CONFIG_MIPS_DB1550 $CONFIG_MIPS32
+dep_bool 'Support for Alchemy Db1200 board' CONFIG_MIPS_DB1200 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32
-dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32
+dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32
+dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32
dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32
dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32
dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32
@@ -249,6 +252,12 @@ if [ "$CONFIG_MIPS_MIRAGE" = "y" ]; then
define_bool CONFIG_PC_KEYB y
define_bool CONFIG_NONCOHERENT_IO y
fi
+if [ "$CONFIG_MIPS_FICMMP" = "y" ]; then
+ define_bool CONFIG_SOC_AU1X00 y
+ define_bool CONFIG_SOC_AU1200 y
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+fi
if [ "$CONFIG_MIPS_BOSPORUS" = "y" ]; then
define_bool CONFIG_SOC_AU1X00 y
define_bool CONFIG_SOC_AU1500 y
@@ -263,6 +272,12 @@ if [ "$CONFIG_MIPS_PB1000" = "y" ]; then
define_bool CONFIG_SWAP_IO_SPACE_W y
define_bool CONFIG_SWAP_IO_SPACE_L y
fi
+if [ "$CONFIG_MIPS_PB1500" = "y" ]; then
+ define_bool CONFIG_SOC_AU1X00 y
+ define_bool CONFIG_SOC_AU1500 y
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+fi
if [ "$CONFIG_MIPS_PB1100" = "y" ]; then
define_bool CONFIG_SOC_AU1X00 y
define_bool CONFIG_SOC_AU1100 y
@@ -271,9 +286,15 @@ if [ "$CONFIG_MIPS_PB1100" = "y" ]; then
define_bool CONFIG_SWAP_IO_SPACE_W y
define_bool CONFIG_SWAP_IO_SPACE_L y
fi
-if [ "$CONFIG_MIPS_PB1500" = "y" ]; then
+if [ "$CONFIG_MIPS_PB1550" = "y" ]; then
define_bool CONFIG_SOC_AU1X00 y
- define_bool CONFIG_SOC_AU1500 y
+ define_bool CONFIG_SOC_AU1550 y
+ define_bool CONFIG_NONCOHERENT_IO n
+ define_bool CONFIG_PC_KEYB y
+fi
+if [ "$CONFIG_MIPS_PB1200" = "y" ]; then
+ define_bool CONFIG_SOC_AU1X00 y
+ define_bool CONFIG_SOC_AU1200 y
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
fi
@@ -290,18 +311,24 @@ if [ "$CONFIG_MIPS_DB1500" = "y" ]; then
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
fi
+if [ "$CONFIG_MIPS_DB1100" = "y" ]; then
+ define_bool CONFIG_SOC_AU1X00 y
+ define_bool CONFIG_SOC_AU1100 y
+ define_bool CONFIG_NONCOHERENT_IO y
+ define_bool CONFIG_PC_KEYB y
+ define_bool CONFIG_SWAP_IO_SPACE y
+fi
if [ "$CONFIG_MIPS_DB1550" = "y" ]; then
define_bool CONFIG_SOC_AU1X00 y
define_bool CONFIG_SOC_AU1550 y
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
fi
-if [ "$CONFIG_MIPS_DB1100" = "y" ]; then
+if [ "$CONFIG_MIPS_DB1200" = "y" ]; then
define_bool CONFIG_SOC_AU1X00 y
- define_bool CONFIG_SOC_AU1100 y
+ define_bool CONFIG_SOC_AU1200 y
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
- define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MIPS_HYDROGEN3" = "y" ]; then
define_bool CONFIG_SOC_AU1X00 y
@@ -327,12 +354,6 @@ if [ "$CONFIG_COGENT_CSB250" = "y" ]; th
define_bool CONFIG_NONCOHERENT_IO y
define_bool CONFIG_PC_KEYB y
fi
-if [ "$CONFIG_MIPS_PB1550" = "y" ]; then
- define_bool CONFIG_SOC_AU1X00 y
- define_bool CONFIG_SOC_AU1550 y
- define_bool CONFIG_NONCOHERENT_IO n
- define_bool CONFIG_PC_KEYB y
-fi
if [ "$CONFIG_MIPS_COBALT" = "y" ]; then
define_bool CONFIG_BOOT_ELF32 y
define_bool CONFIG_COBALT_LCD y
@@ -729,6 +750,13 @@ if [ "$CONFIG_ACER_PICA_61" = "y" -o \
"$CONFIG_MIPS_PB1000" = "y" -o \
"$CONFIG_MIPS_PB1100" = "y" -o \
"$CONFIG_MIPS_PB1500" = "y" -o \
+ "$CONFIG_MIPS_PB1550" = "y" -o \
+ "$CONFIG_MIPS_PB1200" = "y" -o \
+ "$CONFIG_MIPS_DB1000" = "y" -o \
+ "$CONFIG_MIPS_DB1100" = "y" -o \
+ "$CONFIG_MIPS_DB1500" = "y" -o \
+ "$CONFIG_MIPS_DB1550" = "y" -o \
+ "$CONFIG_MIPS_DB1200" = "y" -o \
"$CONFIG_NEC_OSPREY" = "y" -o \
"$CONFIG_NEC_EAGLE" = "y" -o \
"$CONFIG_NINO" = "y" -o \
Index: linux-2.4.35.4/arch/mips/defconfig
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig
+++ linux-2.4.35.4/arch/mips/defconfig
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -235,11 +235,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -319,9 +314,11 @@ CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -465,7 +462,6 @@ CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-atlas
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-atlas
+++ linux-2.4.35.4/arch/mips/defconfig-atlas
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -235,11 +235,6 @@ CONFIG_IP_PNP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -317,9 +312,11 @@ CONFIG_SD_EXTRA_DEVS=40
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -528,7 +525,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-bosporus
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-bosporus
+++ linux-2.4.35.4/arch/mips/defconfig-bosporus
@@ -30,8 +30,8 @@ CONFIG_MIPS_BOSPORUS=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -208,9 +208,7 @@ CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_BOSPORUS=y
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -229,7 +227,6 @@ CONFIG_MTD_BOSPORUS=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -373,11 +370,6 @@ CONFIG_IP_NF_MANGLE=m
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -457,9 +449,11 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -681,7 +675,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-capcella
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-capcella
+++ linux-2.4.35.4/arch/mips/defconfig-capcella
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -228,11 +228,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -472,7 +467,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-cobalt
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-cobalt
+++ linux-2.4.35.4/arch/mips/defconfig-cobalt
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -222,11 +222,6 @@ CONFIG_INET=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -505,7 +500,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=16
Index: linux-2.4.35.4/arch/mips/defconfig-csb250
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-csb250
+++ linux-2.4.35.4/arch/mips/defconfig-csb250
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
CONFIG_COGENT_CSB250=y
@@ -268,11 +268,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -556,7 +551,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-db1000
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-db1000
+++ linux-2.4.35.4/arch/mips/defconfig-db1000
@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1000=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -214,11 +214,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-CONFIG_MTD_DB1X00=y
-CONFIG_MTD_DB1X00_BOOT=y
-CONFIG_MTD_DB1X00_USER=y
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -237,7 +233,6 @@ CONFIG_MTD_DB1X00_USER=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -342,11 +337,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -636,7 +626,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-db1100
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-db1100
+++ linux-2.4.35.4/arch/mips/defconfig-db1100
@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1100=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -214,11 +214,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-CONFIG_MTD_DB1X00=y
-# CONFIG_MTD_DB1X00_BOOT is not set
-CONFIG_MTD_DB1X00_USER=y
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -237,7 +233,6 @@ CONFIG_MTD_DB1X00_USER=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -342,11 +337,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -636,7 +626,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
@@ -884,6 +873,7 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_AU1100=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
@@ -895,7 +885,6 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
-CONFIG_FB_AU1100=y
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
Index: linux-2.4.35.4/arch/mips/defconfig-db1200
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/defconfig-db1200
@@ -0,0 +1,1032 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_MIPS=y
+CONFIG_MIPS32=y
+# CONFIG_MIPS64 is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_COGENT_CSB250 is not set
+# CONFIG_BAGET_MIPS is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_HP_LASERJET is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MAGNUM_4000 is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_NEC_OSPREY is not set
+# CONFIG_NEC_EAGLE is not set
+# CONFIG_OLIVETTI_M700 is not set
+# CONFIG_NINO is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_TANBAC_TB0229 is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_VTAG_ICACHE is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+
+#
+# General setup
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_NEW=y
+CONFIG_PCI_AUTO=y
+# CONFIG_PCI_NAMES is not set
+# CONFIG_ISA is not set
+# CONFIG_TC is not set
+# CONFIG_MCA is not set
+# CONFIG_SBUS is not set
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
+CONFIG_PCMCIA=m
+# CONFIG_CARDBUS is not set
+# CONFIG_TCIC is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_MIPS32_COMPAT is not set
+# CONFIG_MIPS32_O32 is not set
+# CONFIG_MIPS32_N32 is not set
+# CONFIG_BINFMT_ELF32 is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="mem=96M"
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_FILTER=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+
+#
+#
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDEDISK_STROKE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
+
+#
+# SCSI support
+#
+CONFIG_SCSI=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_SD_EXTRA_DEVS=40
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_SR_EXTRA_DEVS=2
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_DEBUG_QUEUES is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_MEGARAID2 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_DMA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NCR53C7xx is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_NCR53C8XX is not set
+# CONFIG_SCSI_SYM53C8XX is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_SCSI_PCMCIA is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_SUNLANCE is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input core support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBDEV=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+# CONFIG_SERIAL is not set
+# CONFIG_SERIAL_EXTENDED is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_DIGI is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_SERIAL_TX3912 is not set
+# CONFIG_SERIAL_TX3912_CONSOLE is not set
+# CONFIG_SERIAL_TXX9 is not set
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
+# CONFIG_TXX927_SERIAL is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+# CONFIG_INPUT_NS558 is not set
+# CONFIG_INPUT_LIGHTNING is not set
+# CONFIG_INPUT_PCIGAME is not set
+# CONFIG_INPUT_CS461X is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_INPUT_SERIO is not set
+# CONFIG_INPUT_SERPORT is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_ANALOG is not set
+# CONFIG_INPUT_A3D is not set
+# CONFIG_INPUT_ADI is not set
+# CONFIG_INPUT_COBRA is not set
+# CONFIG_INPUT_GF2K is not set
+# CONFIG_INPUT_GRIP is not set
+# CONFIG_INPUT_INTERACT is not set
+# CONFIG_INPUT_TMDC is not set
+# CONFIG_INPUT_SIDEWINDER is not set
+# CONFIG_INPUT_IFORCE_USB is not set
+# CONFIG_INPUT_IFORCE_232 is not set
+# CONFIG_INPUT_WARRIOR is not set
+# CONFIG_INPUT_MAGELLAN is not set
+# CONFIG_INPUT_SPACEORB is not set
+# CONFIG_INPUT_SPACEBALL is not set
+# CONFIG_INPUT_STINGER is not set
+# CONFIG_INPUT_DB9 is not set
+# CONFIG_INPUT_GAMECON is not set
+# CONFIG_INPUT_TURBOGRAFX is not set
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_PCMCIA_SERIAL_CS is not set
+# CONFIG_SYNCLINK_CS is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=y
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_TMPFS=y
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Console drivers
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+
+#
+# Frame-buffer support
+#
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_CLGEN is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_IT8181 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FBCON_ADVANCED=y
+# CONFIG_FBCON_MFB is not set
+# CONFIG_FBCON_CFB2 is not set
+# CONFIG_FBCON_CFB4 is not set
+# CONFIG_FBCON_CFB8 is not set
+CONFIG_FBCON_CFB16=y
+# CONFIG_FBCON_CFB24 is not set
+CONFIG_FBCON_CFB32=y
+# CONFIG_FBCON_AFB is not set
+# CONFIG_FBCON_ILBM is not set
+# CONFIG_FBCON_IPLAN2P2 is not set
+# CONFIG_FBCON_IPLAN2P4 is not set
+# CONFIG_FBCON_IPLAN2P8 is not set
+# CONFIG_FBCON_MAC is not set
+# CONFIG_FBCON_VGA_PLANES is not set
+# CONFIG_FBCON_VGA is not set
+# CONFIG_FBCON_HGA is not set
+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
+CONFIG_FBCON_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_MIDI_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_MIDI_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+# CONFIG_SOUND_WM97XX is not set
+
+#
+# USB support
+#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_UHCI is not set
+# CONFIG_USB_UHCI_ALT is not set
+CONFIG_USB_OHCI=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_BLUETOOTH is not set
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# USB Human Interface Devices (HID)
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_DC2XX is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_SCANNER is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network adaptors
+#
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_BRLVGER is not set
+# CONFIG_USB_LCD is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
+#
+# Kernel hacking
+#
+CONFIG_CROSSCOMPILE=y
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_KGDB is not set
+# CONFIG_GDB_CONSOLE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MIPS_UNCACHED is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+# CONFIG_FW_LOADER is not set
Index: linux-2.4.35.4/arch/mips/defconfig-db1500
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-db1500
+++ linux-2.4.35.4/arch/mips/defconfig-db1500
@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1500=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -267,11 +267,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -555,7 +550,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-db1550
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-db1550
+++ linux-2.4.35.4/arch/mips/defconfig-db1550
@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1550=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -213,11 +213,9 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
CONFIG_MTD_PB1550=y
CONFIG_MTD_PB1550_BOOT=y
CONFIG_MTD_PB1550_USER=y
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -236,7 +234,6 @@ CONFIG_MTD_PB1550_USER=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -343,11 +340,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -633,7 +625,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ddb5476
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ddb5476
+++ linux-2.4.35.4/arch/mips/defconfig-ddb5476
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -226,11 +226,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -517,7 +512,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ddb5477
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ddb5477
+++ linux-2.4.35.4/arch/mips/defconfig-ddb5477
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -226,11 +226,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -434,7 +429,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-decstation
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-decstation
+++ linux-2.4.35.4/arch/mips/defconfig-decstation
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -223,11 +223,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -306,9 +301,11 @@ CONFIG_SCSI_DECNCR=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -477,7 +474,6 @@ CONFIG_SERIAL_DEC=y
CONFIG_SERIAL_DEC_CONSOLE=y
CONFIG_DZ=y
CONFIG_ZS=y
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-e55
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-e55
+++ linux-2.4.35.4/arch/mips/defconfig-e55
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -222,11 +222,6 @@ CONFIG_IP_MULTICAST=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -426,7 +421,6 @@ CONFIG_SERIAL_MANY_PORTS=y
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-eagle
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-eagle
+++ linux-2.4.35.4/arch/mips/defconfig-eagle
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -208,8 +208,8 @@ CONFIG_MTD_CFI_INTELEXT=y
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=1c000000
-CONFIG_MTD_PHYSMAP_LEN=2000000
+CONFIG_MTD_PHYSMAP_START=0x1c000000
+CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_PB1000 is not set
# CONFIG_MTD_PB1500 is not set
@@ -217,9 +217,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -238,7 +236,6 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -327,11 +324,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -587,7 +579,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ev64120
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ev64120
+++ linux-2.4.35.4/arch/mips/defconfig-ev64120
@@ -30,8 +30,8 @@ CONFIG_MODULES=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -230,11 +230,6 @@ CONFIG_IP_PNP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -443,7 +438,6 @@ CONFIG_SERIAL=y
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ev96100
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ev96100
+++ linux-2.4.35.4/arch/mips/defconfig-ev96100
@@ -30,8 +30,8 @@ CONFIG_MODULES=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -232,11 +232,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -441,7 +436,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ficmmp
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/defconfig-ficmmp
@@ -0,0 +1,862 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_MIPS=y
+CONFIG_MIPS32=y
+# CONFIG_MIPS64 is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_COGENT_CSB250 is not set
+# CONFIG_BAGET_MIPS is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_HP_LASERJET is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MAGNUM_4000 is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_NEC_OSPREY is not set
+# CONFIG_NEC_EAGLE is not set
+# CONFIG_OLIVETTI_M700 is not set
+# CONFIG_NINO is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_TANBAC_TB0229 is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_VTAG_ICACHE is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+
+#
+# General setup
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_NET=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_NEW is not set
+CONFIG_PCI_AUTO=y
+# CONFIG_ISA is not set
+# CONFIG_TC is not set
+# CONFIG_MCA is not set
+# CONFIG_SBUS is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_MIPS32_COMPAT is not set
+# CONFIG_MIPS32_O32 is not set
+# CONFIG_MIPS32_N32 is not set
+# CONFIG_BINFMT_ELF32 is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ide3=dma mem=96M root=/dev/hda2 rootflags=data=journal"
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_FILTER=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+
+#
+#
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_HD_IDE=y
+CONFIG_BLK_DEV_HD=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDEDISK_STROKE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
+
+#
+# SCSI support
+#
+CONFIG_SCSI=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_SD_EXTRA_DEVS=40
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_SR_EXTRA_DEVS=2
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_DEBUG_QUEUES is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_MEGARAID2 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_DMA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NCR53C7xx is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input core support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBDEV=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_SERIAL is not set
+# CONFIG_SERIAL_EXTENDED is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_DIGI is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_SERIAL_TX3912 is not set
+# CONFIG_SERIAL_TX3912_CONSOLE is not set
+# CONFIG_SERIAL_TXX9 is not set
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
+# CONFIG_TXX927_SERIAL is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_PROC is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+# CONFIG_INPUT_NS558 is not set
+# CONFIG_INPUT_LIGHTNING is not set
+# CONFIG_INPUT_PCIGAME is not set
+# CONFIG_INPUT_CS461X is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_INPUT_SERIO is not set
+# CONFIG_INPUT_SERPORT is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_ANALOG is not set
+# CONFIG_INPUT_A3D is not set
+# CONFIG_INPUT_ADI is not set
+# CONFIG_INPUT_COBRA is not set
+# CONFIG_INPUT_GF2K is not set
+# CONFIG_INPUT_GRIP is not set
+# CONFIG_INPUT_INTERACT is not set
+# CONFIG_INPUT_TMDC is not set
+# CONFIG_INPUT_SIDEWINDER is not set
+# CONFIG_INPUT_IFORCE_USB is not set
+# CONFIG_INPUT_IFORCE_232 is not set
+# CONFIG_INPUT_WARRIOR is not set
+# CONFIG_INPUT_MAGELLAN is not set
+# CONFIG_INPUT_SPACEORB is not set
+# CONFIG_INPUT_SPACEBALL is not set
+# CONFIG_INPUT_STINGER is not set
+# CONFIG_INPUT_DB9 is not set
+# CONFIG_INPUT_GAMECON is not set
+# CONFIG_INPUT_TURBOGRAFX is not set
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=y
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_TMPFS is not set
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_LOCKD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Console drivers
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+
+#
+# Frame-buffer support
+#
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FBCON_ADVANCED=y
+# CONFIG_FBCON_MFB is not set
+# CONFIG_FBCON_CFB2 is not set
+# CONFIG_FBCON_CFB4 is not set
+# CONFIG_FBCON_CFB8 is not set
+CONFIG_FBCON_CFB16=y
+# CONFIG_FBCON_CFB24 is not set
+# CONFIG_FBCON_CFB32 is not set
+# CONFIG_FBCON_AFB is not set
+# CONFIG_FBCON_ILBM is not set
+# CONFIG_FBCON_IPLAN2P2 is not set
+# CONFIG_FBCON_IPLAN2P4 is not set
+# CONFIG_FBCON_IPLAN2P8 is not set
+# CONFIG_FBCON_MAC is not set
+# CONFIG_FBCON_VGA_PLANES is not set
+# CONFIG_FBCON_VGA is not set
+# CONFIG_FBCON_HGA is not set
+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
+CONFIG_FBCON_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_MIDI_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_MIDI_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+# CONFIG_SOUND_WM97XX is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
+#
+# Kernel hacking
+#
+CONFIG_CROSSCOMPILE=y
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_KGDB is not set
+# CONFIG_GDB_CONSOLE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MIPS_UNCACHED is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
Index: linux-2.4.35.4/arch/mips/defconfig-hp-lj
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-hp-lj
+++ linux-2.4.35.4/arch/mips/defconfig-hp-lj
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -184,8 +184,8 @@ CONFIG_MTD_CFI_AMDSTD=y
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=10040000
-CONFIG_MTD_PHYSMAP_LEN=00fc0000
+CONFIG_MTD_PHYSMAP_START=0x10040000
+CONFIG_MTD_PHYSMAP_LEN=0x00fc0000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_PB1000 is not set
# CONFIG_MTD_PB1500 is not set
@@ -193,9 +193,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -214,7 +212,6 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -304,11 +301,6 @@ CONFIG_IP_PNP_DHCP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -604,7 +596,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_UNIX98_PTYS is not set
#
Index: linux-2.4.35.4/arch/mips/defconfig-hydrogen3
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-hydrogen3
+++ linux-2.4.35.4/arch/mips/defconfig-hydrogen3
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-CONFIG_MIPS_HYDROGEN3=y
# CONFIG_MIPS_PB1550 is not set
+CONFIG_MIPS_HYDROGEN3=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -214,9 +214,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-CONFIG_MTD_HYDROGEN3=y
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -235,7 +233,6 @@ CONFIG_MTD_HYDROGEN3=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -340,11 +337,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -590,7 +582,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-CONFIG_MIPS_HYDROGEN3_BUTTONS=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
@@ -838,6 +829,7 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_AU1100=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
@@ -849,7 +841,6 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
-CONFIG_FB_AU1100=y
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
Index: linux-2.4.35.4/arch/mips/defconfig-ip22
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ip22
+++ linux-2.4.35.4/arch/mips/defconfig-ip22
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -235,11 +235,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -319,9 +314,11 @@ CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -465,7 +462,6 @@ CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-it8172
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-it8172
+++ linux-2.4.35.4/arch/mips/defconfig-it8172
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -186,8 +186,8 @@ CONFIG_MTD_CFI_INTELEXT=y
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=8000000
-CONFIG_MTD_PHYSMAP_LEN=2000000
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x2000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_PB1000 is not set
# CONFIG_MTD_PB1500 is not set
@@ -195,9 +195,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -216,7 +214,6 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -304,11 +301,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -592,7 +584,6 @@ CONFIG_SERIAL_CONSOLE=y
CONFIG_PC_KEYB=y
# CONFIG_IT8172_SCR0 is not set
# CONFIG_IT8172_SCR1 is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ivr
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ivr
+++ linux-2.4.35.4/arch/mips/defconfig-ivr
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -226,11 +226,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -516,7 +511,6 @@ CONFIG_SERIAL_CONSOLE=y
CONFIG_QTRONIX_KEYBOARD=y
CONFIG_IT8172_CIR=y
# CONFIG_IT8172_SCR0 is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-jmr3927
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-jmr3927
+++ linux-2.4.35.4/arch/mips/defconfig-jmr3927
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -225,11 +225,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -454,7 +449,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_TXX9_CONSOLE is not set
CONFIG_TXX927_SERIAL=y
CONFIG_TXX927_SERIAL_CONSOLE=y
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_UNIX98_PTYS is not set
#
Index: linux-2.4.35.4/arch/mips/defconfig-lasat
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-lasat
+++ linux-2.4.35.4/arch/mips/defconfig-lasat
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -198,9 +198,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -219,7 +217,6 @@ CONFIG_MTD_LASAT=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -303,11 +300,6 @@ CONFIG_INET=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -584,7 +576,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-malta
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-malta
+++ linux-2.4.35.4/arch/mips/defconfig-malta
@@ -22,16 +22,19 @@ CONFIG_KMOD=y
#
# CONFIG_ACER_PICA_61 is not set
# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_FICMMP is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -237,11 +240,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -273,8 +271,83 @@ CONFIG_IP_PNP_BOOTP=y
#
# ATA/IDE/MFM/RLL support
#
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_IDEDMA_FORCED=y
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_PCI_WIP is not set
+# CONFIG_BLK_DEV_ADMA100 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_WDC_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_AMD74XX_OVERRIDE is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_HPT34X_AUTODMA is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_PDC202XX_BURST is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
#
# SCSI support
@@ -319,9 +392,11 @@ CONFIG_SD_EXTRA_DEVS=40
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -524,7 +599,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-mirage
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-mirage
+++ linux-2.4.35.4/arch/mips/defconfig-mirage
@@ -30,8 +30,8 @@ CONFIG_MIPS_MIRAGE=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -209,9 +209,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
CONFIG_MTD_MIRAGE=y
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -230,7 +228,6 @@ CONFIG_MTD_MIRAGE=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -335,11 +332,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -560,7 +552,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-mpc30x
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-mpc30x
+++ linux-2.4.35.4/arch/mips/defconfig-mpc30x
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -228,11 +228,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -400,7 +395,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-mtx-1
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-mtx-1
+++ linux-2.4.35.4/arch/mips/defconfig-mtx-1
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
CONFIG_MIPS_MTX1=y
# CONFIG_COGENT_CSB250 is not set
@@ -193,9 +193,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
CONFIG_MTD_MTX1=y
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -214,7 +212,6 @@ CONFIG_MTD_MTX1=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -371,11 +368,6 @@ CONFIG_VLAN_8021Q=m
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
CONFIG_BRIDGE=m
# CONFIG_X25 is not set
@@ -479,9 +471,11 @@ CONFIG_SR_EXTRA_DEVS=2
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -700,7 +694,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-nino
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-nino
+++ linux-2.4.35.4/arch/mips/defconfig-nino
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -226,11 +226,6 @@ CONFIG_INET=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -339,7 +334,6 @@ CONFIG_SERIAL_TX3912_CONSOLE=y
# CONFIG_SERIAL_TXX9 is not set
# CONFIG_SERIAL_TXX9_CONSOLE is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_UNIX98_PTYS is not set
#
Index: linux-2.4.35.4/arch/mips/defconfig-ocelot
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ocelot
+++ linux-2.4.35.4/arch/mips/defconfig-ocelot
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -194,9 +194,7 @@ CONFIG_MTD_JEDEC=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
CONFIG_MTD_OCELOT=y
@@ -215,7 +213,6 @@ CONFIG_MTD_OCELOT=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
CONFIG_MTD_DOC2000=y
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOCPROBE=y
@@ -307,11 +304,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -513,7 +505,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-osprey
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-osprey
+++ linux-2.4.35.4/arch/mips/defconfig-osprey
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -227,11 +227,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -388,7 +383,6 @@ CONFIG_SERIAL_MANY_PORTS=y
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-pb1000
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-pb1000
+++ linux-2.4.35.4/arch/mips/defconfig-pb1000
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
CONFIG_MIPS_PB1000=y
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -215,9 +215,7 @@ CONFIG_MTD_PB1000=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -236,7 +234,6 @@ CONFIG_MTD_PB1000=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -324,11 +321,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -622,7 +614,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
@@ -707,7 +698,7 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_PCMCIA_SERIAL_CS is not set
# CONFIG_SYNCLINK_CS is not set
-CONFIG_AU1X00_GPIO=m
+CONFIG_AU1X00_GPIO=y
# CONFIG_TS_AU1X00_ADS7846 is not set
#
Index: linux-2.4.35.4/arch/mips/defconfig-pb1100
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-pb1100
+++ linux-2.4.35.4/arch/mips/defconfig-pb1100
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
CONFIG_MIPS_PB1100=y
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -198,9 +198,7 @@ CONFIG_MTD_PB1100=y
# CONFIG_MTD_MTX1 is not set
CONFIG_MTD_PB1500_BOOT=y
CONFIG_MTD_PB1500_USER=y
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -219,7 +217,6 @@ CONFIG_MTD_PB1500_USER=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -324,11 +321,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -613,7 +605,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
@@ -859,6 +850,7 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_AU1100=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
@@ -870,7 +862,6 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_E1356 is not set
-CONFIG_FB_AU1100=y
# CONFIG_FB_IT8181 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
Index: linux-2.4.35.4/arch/mips/defconfig-pb1200
===================================================================
--- /dev/null
+++ linux-2.4.35.4/arch/mips/defconfig-pb1200
@@ -0,0 +1,1060 @@
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_MIPS=y
+CONFIG_MIPS32=y
+# CONFIG_MIPS64 is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# Machine selection
+#
+# CONFIG_ACER_PICA_61 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_COGENT_CSB250 is not set
+# CONFIG_BAGET_MIPS is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_HP_LASERJET is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MAGNUM_4000 is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_PMC_BIG_SUR is not set
+# CONFIG_PMC_STRETCH is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_NEC_OSPREY is not set
+# CONFIG_NEC_EAGLE is not set
+# CONFIG_OLIVETTI_M700 is not set
+# CONFIG_NINO is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SIBYTE_SB1xxx_SOC is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TANBAC_TB0226 is not set
+# CONFIG_TANBAC_TB0229 is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_SOC_AU1X00=y
+CONFIG_SOC_AU1200=y
+CONFIG_NONCOHERENT_IO=y
+CONFIG_PC_KEYB=y
+# CONFIG_MIPS_AU1000 is not set
+
+#
+# CPU selection
+#
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS64 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+# CONFIG_VTAG_ICACHE is not set
+CONFIG_64BIT_PHYS_ADDR=y
+# CONFIG_CPU_ADVANCED is not set
+CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_HAS_LLDSCD is not set
+# CONFIG_CPU_HAS_WB is not set
+CONFIG_CPU_HAS_SYNC=y
+
+#
+# General setup
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_NET=y
+CONFIG_PCI=y
+CONFIG_PCI_NEW=y
+CONFIG_PCI_AUTO=y
+# CONFIG_PCI_NAMES is not set
+# CONFIG_ISA is not set
+# CONFIG_TC is not set
+# CONFIG_MCA is not set
+# CONFIG_SBUS is not set
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
+CONFIG_PCMCIA=m
+# CONFIG_CARDBUS is not set
+# CONFIG_TCIC is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+CONFIG_PCMCIA_AU1X00=m
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_MIPS32_COMPAT is not set
+# CONFIG_MIPS32_O32 is not set
+# CONFIG_MIPS32_N32 is not set
+# CONFIG_BINFMT_ELF32 is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="mem=96M"
+# CONFIG_PM is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_FILTER=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+
+#
+#
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDEDISK_STROKE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
+
+#
+# SCSI support
+#
+CONFIG_SCSI=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_SD_EXTRA_DEVS=40
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_SR_EXTRA_DEVS=2
+# CONFIG_CHR_DEV_SG is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_DEBUG_QUEUES is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_MEGARAID2 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_DMA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NCR53C7xx is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_NCR53C8XX is not set
+# CONFIG_SCSI_SYM53C8XX is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_SCSI_PCMCIA is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input core support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_KEYBDEV=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+# CONFIG_SERIAL is not set
+# CONFIG_SERIAL_EXTENDED is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_DIGI is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_SERIAL_TX3912 is not set
+# CONFIG_SERIAL_TX3912_CONSOLE is not set
+# CONFIG_SERIAL_TXX9 is not set
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
+CONFIG_AU1X00_UART=y
+CONFIG_AU1X00_SERIAL_CONSOLE=y
+# CONFIG_AU1X00_USB_TTY is not set
+# CONFIG_AU1X00_USB_RAW is not set
+# CONFIG_TXX927_SERIAL is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_PROC=y
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+# CONFIG_INPUT_NS558 is not set
+# CONFIG_INPUT_LIGHTNING is not set
+# CONFIG_INPUT_PCIGAME is not set
+# CONFIG_INPUT_CS461X is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_INPUT_SERIO is not set
+# CONFIG_INPUT_SERPORT is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_ANALOG is not set
+# CONFIG_INPUT_A3D is not set
+# CONFIG_INPUT_ADI is not set
+# CONFIG_INPUT_COBRA is not set
+# CONFIG_INPUT_GF2K is not set
+# CONFIG_INPUT_GRIP is not set
+# CONFIG_INPUT_INTERACT is not set
+# CONFIG_INPUT_TMDC is not set
+# CONFIG_INPUT_SIDEWINDER is not set
+# CONFIG_INPUT_IFORCE_USB is not set
+# CONFIG_INPUT_IFORCE_232 is not set
+# CONFIG_INPUT_WARRIOR is not set
+# CONFIG_INPUT_MAGELLAN is not set
+# CONFIG_INPUT_SPACEORB is not set
+# CONFIG_INPUT_SPACEBALL is not set
+# CONFIG_INPUT_STINGER is not set
+# CONFIG_INPUT_DB9 is not set
+# CONFIG_INPUT_GAMECON is not set
+# CONFIG_INPUT_TURBOGRAFX is not set
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_GPIO is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_PCMCIA_SERIAL_CS is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_AU1X00_GPIO is not set
+# CONFIG_TS_AU1X00_ADS7846 is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=y
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_TMPFS=y
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Console drivers
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+
+#
+# Frame-buffer support
+#
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_CLGEN is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_E1356 is not set
+# CONFIG_FB_IT8181 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FBCON_ADVANCED=y
+# CONFIG_FBCON_MFB is not set
+# CONFIG_FBCON_CFB2 is not set
+# CONFIG_FBCON_CFB4 is not set
+# CONFIG_FBCON_CFB8 is not set
+CONFIG_FBCON_CFB16=y
+# CONFIG_FBCON_CFB24 is not set
+CONFIG_FBCON_CFB32=y
+# CONFIG_FBCON_AFB is not set
+# CONFIG_FBCON_ILBM is not set
+# CONFIG_FBCON_IPLAN2P2 is not set
+# CONFIG_FBCON_IPLAN2P4 is not set
+# CONFIG_FBCON_IPLAN2P8 is not set
+# CONFIG_FBCON_MAC is not set
+# CONFIG_FBCON_VGA_PLANES is not set
+# CONFIG_FBCON_VGA is not set
+# CONFIG_FBCON_HGA is not set
+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
+CONFIG_FBCON_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_MIDI_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_AU1X00 is not set
+CONFIG_SOUND_AU1550_PSC=y
+# CONFIG_SOUND_AU1550_I2S is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_MIDI_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+# CONFIG_SOUND_WM97XX is not set
+
+#
+# USB support
+#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_UHCI is not set
+# CONFIG_USB_UHCI_ALT is not set
+CONFIG_USB_OHCI=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_BLUETOOTH is not set
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# USB Human Interface Devices (HID)
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_DC2XX is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_SCANNER is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network adaptors
+#
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_BRLVGER is not set
+# CONFIG_USB_LCD is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
+#
+# Kernel hacking
+#
+CONFIG_CROSSCOMPILE=y
+# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_KGDB is not set
+# CONFIG_GDB_CONSOLE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_MIPS_UNCACHED is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+# CONFIG_FW_LOADER is not set
Index: linux-2.4.35.4/arch/mips/defconfig-pb1500
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-pb1500
+++ linux-2.4.35.4/arch/mips/defconfig-pb1500
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
CONFIG_MIPS_PB1500=y
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -215,9 +215,7 @@ CONFIG_MTD_PB1500=y
# CONFIG_MTD_MTX1 is not set
CONFIG_MTD_PB1500_BOOT=y
# CONFIG_MTD_PB1500_USER is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -236,7 +234,6 @@ CONFIG_MTD_PB1500_BOOT=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -341,11 +338,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -675,7 +667,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-pb1550
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-pb1550
+++ linux-2.4.35.4/arch/mips/defconfig-pb1550
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
CONFIG_MIPS_PB1550=y
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -213,11 +213,9 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
# CONFIG_MTD_XXS1500 is not set
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
CONFIG_MTD_PB1550=y
CONFIG_MTD_PB1550_BOOT=y
CONFIG_MTD_PB1550_USER=y
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -236,7 +234,6 @@ CONFIG_MTD_PB1550_USER=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -343,11 +340,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -633,7 +625,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-rbtx4927
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-rbtx4927
+++ linux-2.4.35.4/arch/mips/defconfig-rbtx4927
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -223,11 +223,6 @@ CONFIG_IP_PNP_DHCP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -466,7 +461,6 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_TXX9=y
CONFIG_SERIAL_TXX9_CONSOLE=y
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_UNIX98_PTYS is not set
#
Index: linux-2.4.35.4/arch/mips/defconfig-rm200
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-rm200
+++ linux-2.4.35.4/arch/mips/defconfig-rm200
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -229,11 +229,6 @@ CONFIG_INET=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -340,7 +335,6 @@ CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-sb1250-swarm
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-sb1250-swarm
+++ linux-2.4.35.4/arch/mips/defconfig-sb1250-swarm
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -90,6 +90,7 @@ CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_SIBYTE_GENBUS_IDE=y
CONFIG_SMP_CAPABLE=y
+CONFIG_MIPS_RTC=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TANBAC_TB0226 is not set
# CONFIG_TANBAC_TB0229 is not set
@@ -253,11 +254,6 @@ CONFIG_INET=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -469,7 +465,6 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SIBYTE_SB1250_DUART=y
CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
CONFIG_SERIAL_CONSOLE=y
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-sead
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-sead
+++ linux-2.4.35.4/arch/mips/defconfig-sead
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -244,7 +244,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_UNIX98_PTYS is not set
#
Index: linux-2.4.35.4/arch/mips/defconfig-stretch
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-stretch
+++ linux-2.4.35.4/arch/mips/defconfig-stretch
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -240,11 +240,6 @@ CONFIG_IP_PNP_DHCP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -324,9 +319,11 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -516,7 +513,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_TXX9 is not set
# CONFIG_SERIAL_TXX9_CONSOLE is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-tb0226
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-tb0226
+++ linux-2.4.35.4/arch/mips/defconfig-tb0226
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -228,11 +228,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -312,9 +307,11 @@ CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -518,7 +515,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-tb0229
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-tb0229
+++ linux-2.4.35.4/arch/mips/defconfig-tb0229
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -230,11 +230,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -445,7 +440,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-ti1500
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-ti1500
+++ linux-2.4.35.4/arch/mips/defconfig-ti1500
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
CONFIG_MIPS_XXS1500=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -213,9 +213,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
CONFIG_MTD_XXS1500=y
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -234,7 +232,6 @@ CONFIG_MTD_XXS1500=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -339,11 +336,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -600,7 +592,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-workpad
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-workpad
+++ linux-2.4.35.4/arch/mips/defconfig-workpad
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -222,11 +222,6 @@ CONFIG_IP_MULTICAST=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -426,7 +421,6 @@ CONFIG_SERIAL_MANY_PORTS=y
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_VR41XX_KIU is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-xxs1500
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-xxs1500
+++ linux-2.4.35.4/arch/mips/defconfig-xxs1500
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
CONFIG_MIPS_XXS1500=y
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -213,9 +213,7 @@ CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_BOSPORUS is not set
CONFIG_MTD_XXS1500=y
# CONFIG_MTD_MTX1 is not set
-# CONFIG_MTD_DB1X00 is not set
# CONFIG_MTD_PB1550 is not set
-# CONFIG_MTD_HYDROGEN3 is not set
# CONFIG_MTD_MIRAGE is not set
# CONFIG_MTD_CSTM_MIPS_IXX is not set
# CONFIG_MTD_OCELOT is not set
@@ -234,7 +232,6 @@ CONFIG_MTD_XXS1500=y
#
# Disk-On-Chip Device Drivers
#
-# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
@@ -339,11 +336,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -671,7 +663,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y
# CONFIG_AU1X00_USB_TTY is not set
# CONFIG_AU1X00_USB_RAW is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/defconfig-yosemite
===================================================================
--- linux-2.4.35.4.orig/arch/mips/defconfig-yosemite
+++ linux-2.4.35.4/arch/mips/defconfig-yosemite
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -227,11 +227,6 @@ CONFIG_IP_PNP_DHCP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -310,9 +305,11 @@ CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -477,7 +474,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_TXX9 is not set
# CONFIG_SERIAL_TXX9_CONSOLE is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips/kernel/cpu-probe.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/kernel/cpu-probe.c
+++ linux-2.4.35.4/arch/mips/kernel/cpu-probe.c
@@ -34,21 +34,16 @@ static void r4k_wait(void)
".set\tmips0");
}
-/* The Au1xxx wait is available only if we run CONFIG_PM and
- * the timer setup found we had a 32KHz counter available.
- * There are still problems with functions that may call au1k_wait
- * directly, but that will be discovered pretty quickly.
- */
-extern void (*au1k_wait_ptr)(void);
-void au1k_wait(void)
+/* The Au1xxx wait is available only if using 32khz counter or
+ * external timer source, but specifically not CP0 Counter. */
+int allow_au1k_wait;
+
+static void au1k_wait(void)
{
-#ifdef CONFIG_PM
- unsigned long addr;
/* using the wait instruction makes CP0 counter unusable */
- __asm__("la %0,au1k_wait\n\t"
- ".set mips3\n\t"
- "cache 0x14,0(%0)\n\t"
- "cache 0x14,32(%0)\n\t"
+ __asm__(".set mips3\n\t"
+ "cache 0x14, 0(%0)\n\t"
+ "cache 0x14, 32(%0)\n\t"
"sync\n\t"
"nop\n\t"
"wait\n\t"
@@ -57,11 +52,7 @@ void au1k_wait(void)
"nop\n\t"
"nop\n\t"
".set mips0\n\t"
- : : "r" (addr));
-#else
- __asm__("nop\n\t"
- "nop");
-#endif
+ : : "r" (au1k_wait));
}
static inline void check_wait(void)
@@ -100,20 +91,17 @@ static inline void check_wait(void)
cpu_wait = r4k_wait;
printk(" available.\n");
break;
-#ifdef CONFIG_PM
case CPU_AU1000:
case CPU_AU1100:
case CPU_AU1500:
case CPU_AU1550:
- if (au1k_wait_ptr != NULL) {
- cpu_wait = au1k_wait_ptr;
+ case CPU_AU1200:
+ if (allow_au1k_wait) {
+ cpu_wait = au1k_wait;
printk(" available.\n");
- }
- else {
+ } else
printk(" unavailable.\n");
- }
break;
-#endif
default:
printk(" unavailable.\n");
break;
Index: linux-2.4.35.4/arch/mips/kernel/head.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips/kernel/head.S
+++ linux-2.4.35.4/arch/mips/kernel/head.S
@@ -43,9 +43,9 @@
/* Cache Error */
LEAF(except_vec2_generic)
+ .set push
.set noreorder
.set noat
- .set mips0
/*
* This is a very bad place to be. Our cache error
* detection has triggered. If we have write-back data
@@ -64,10 +64,9 @@
j cache_parity_error
nop
+ .set pop
END(except_vec2_generic)
- .set at
-
/*
* Special interrupt vector for embedded MIPS. This is a
* dedicated interrupt vector which reduces interrupt processing
@@ -76,8 +75,11 @@
* size!
*/
NESTED(except_vec4, 0, sp)
+ .set push
+ .set noreorder
1: j 1b /* Dummy, will be replaced */
nop
+ .set pop
END(except_vec4)
/*
@@ -87,8 +89,11 @@
* unconditional jump to this vector.
*/
NESTED(except_vec_ejtag_debug, 0, sp)
+ .set push
+ .set noreorder
j ejtag_debug_handler
nop
+ .set pop
END(except_vec_ejtag_debug)
__FINIT
@@ -97,6 +102,7 @@
* EJTAG debug exception handler.
*/
NESTED(ejtag_debug_handler, PT_SIZE, sp)
+ .set push
.set noat
.set noreorder
mtc0 k0, CP0_DESAVE
@@ -120,7 +126,7 @@ ejtag_return:
deret
.set mips0
nop
- .set at
+ .set pop
END(ejtag_debug_handler)
__INIT
@@ -132,13 +138,17 @@ ejtag_return:
* unconditional jump to this vector.
*/
NESTED(except_vec_nmi, 0, sp)
+ .set push
+ .set noreorder
j nmi_handler
nop
+ .set pop
END(except_vec_nmi)
__FINIT
NESTED(nmi_handler, PT_SIZE, sp)
+ .set push
.set noat
.set noreorder
.set mips3
@@ -147,8 +157,7 @@ ejtag_return:
move a0, sp
RESTORE_ALL
eret
- .set at
- .set mips0
+ .set pop
END(nmi_handler)
__INIT
@@ -157,7 +166,20 @@ ejtag_return:
* Kernel entry point
*/
NESTED(kernel_entry, 16, sp)
+ .set push
+ /*
+ * For the moment disable interrupts and mark the kernel mode.
+ * A full initialization of the CPU's status register is done
+ * later in per_cpu_trap_init().
+ */
+ mfc0 t0, CP0_STATUS
+ or t0, ST0_CU0|0x1f
+ xor t0, 0x1f
+ mtc0 t0, CP0_STATUS
+
.set noreorder
+ sll zero,3 # ehb
+ .set reorder
/*
* The firmware/bootloader passes argc/argp/envp
@@ -170,8 +192,8 @@ ejtag_return:
la t1, (_end - 4)
1:
addiu t0, 4
+ sw zero, (t0)
bne t0, t1, 1b
- sw zero, (t0)
/*
* Stack for kernel and init, current variable
@@ -182,7 +204,7 @@ ejtag_return:
sw t0, kernelsp
jal init_arch
- nop
+ .set pop
END(kernel_entry)
@@ -193,17 +215,26 @@ ejtag_return:
* function after setting up the stack and gp registers.
*/
LEAF(smp_bootstrap)
- .set push
- .set noreorder
- mtc0 zero, CP0_WIRED
- CLI
+ .set push
+ /*
+ * For the moment disable interrupts and bootstrap exception
+ * vectors and mark the kernel mode. A full initialization of
+ * the CPU's status register is done later in
+ * per_cpu_trap_init().
+ */
mfc0 t0, CP0_STATUS
- li t1, ~(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_UX)
- and t0, t1
- or t0, (ST0_CU0);
+ or t0, ST0_CU0|ST0_BEV|0x1f
+ xor t0, ST0_BEV|0x1f
+ mtc0 t0, CP0_STATUS
+
+ .set noreorder
+ sll zero,3 # ehb
+ .set reorder
+
+ mtc0 zero, CP0_WIRED
+
jal start_secondary
- mtc0 t0, CP0_STATUS
- .set pop
+ .set pop
END(smp_bootstrap)
#endif
Index: linux-2.4.35.4/arch/mips/kernel/process.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/kernel/process.c
+++ linux-2.4.35.4/arch/mips/kernel/process.c
@@ -128,6 +128,26 @@ int dump_fpu(struct pt_regs *regs, elf_f
return 1;
}
+void dump_regs(elf_greg_t *gp, struct pt_regs *regs)
+{
+ int i;
+
+ for (i = 0; i < EF_REG0; i++)
+ gp[i] = 0;
+ gp[EF_REG0] = 0;
+ for (i = 1; i <= 31; i++)
+ gp[EF_REG0 + i] = regs->regs[i];
+ gp[EF_REG26] = 0;
+ gp[EF_REG27] = 0;
+ gp[EF_LO] = regs->lo;
+ gp[EF_HI] = regs->hi;
+ gp[EF_CP0_EPC] = regs->cp0_epc;
+ gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr;
+ gp[EF_CP0_STATUS] = regs->cp0_status;
+ gp[EF_CP0_CAUSE] = regs->cp0_cause;
+ gp[EF_UNUSED0] = 0;
+}
+
/*
* Create a kernel thread
*/
Index: linux-2.4.35.4/arch/mips/kernel/scall_o32.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips/kernel/scall_o32.S
+++ linux-2.4.35.4/arch/mips/kernel/scall_o32.S
@@ -121,15 +121,14 @@ reschedule:
trace_a_syscall:
SAVE_STATIC
- sw t2, PT_R1(sp)
+ move s0, t2
jal syscall_trace
- lw t2, PT_R1(sp)
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
- jalr t2
+ jalr s0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
Index: linux-2.4.35.4/arch/mips/kernel/setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/kernel/setup.c
+++ linux-2.4.35.4/arch/mips/kernel/setup.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 1995 Linus Torvalds
* Copyright (C) 1995 Waldorf Electronics
- * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001 Ralf Baechle
+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 01, 05 Ralf Baechle
* Copyright (C) 1996 Stoned Elipot
* Copyright (C) 2000, 2001, 2002 Maciej W. Rozycki
*/
@@ -71,6 +71,8 @@ extern void * __rd_start, * __rd_end;
extern struct rtc_ops no_rtc_ops;
struct rtc_ops *rtc_ops;
+EXPORT_SYMBOL(rtc_ops);
+
#ifdef CONFIG_PC_KEYB
struct kbd_ops *kbd_ops;
#endif
@@ -132,10 +134,6 @@ init_arch(int argc, char **argv, char **
*/
load_mmu();
- /* Disable coprocessors and set FPU for 16/32 FPR register model */
- clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR);
- set_c0_status(ST0_CU0);
-
start_kernel();
}
Index: linux-2.4.35.4/arch/mips/kernel/traps.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/kernel/traps.c
+++ linux-2.4.35.4/arch/mips/kernel/traps.c
@@ -452,9 +452,10 @@ static inline void simulate_ll(struct pt
}
ll_task = current;
+ compute_return_epc(regs);
+
regs->regs[(opcode & RT) >> 16] = value;
- compute_return_epc(regs);
return;
sig:
@@ -485,8 +486,8 @@ static inline void simulate_sc(struct pt
goto sig;
}
if (ll_bit == 0 || ll_task != current) {
- regs->regs[reg] = 0;
compute_return_epc(regs);
+ regs->regs[reg] = 0;
return;
}
@@ -495,9 +496,9 @@ static inline void simulate_sc(struct pt
goto sig;
}
+ compute_return_epc(regs);
regs->regs[reg] = 1;
- compute_return_epc(regs);
return;
sig:
@@ -887,12 +888,18 @@ extern asmlinkage int fpu_emulator_resto
void __init per_cpu_trap_init(void)
{
unsigned int cpu = smp_processor_id();
+ unsigned int status_set = ST0_CU0;
- /* Some firmware leaves the BEV flag set, clear it. */
- clear_c0_status(ST0_CU3|ST0_CU2|ST0_CU1|ST0_BEV|ST0_KX|ST0_SX|ST0_UX);
-
+ /*
+ * Disable coprocessors and 64-bit addressing and set FPU for
+ * the 16/32 FPR register model. Reset the BEV flag that some
+ * firmware may have left set and the TS bit (for IP27). Set
+ * XX for ISA IV code to work.
+ */
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
- set_c0_status(ST0_XX);
+ status_set |= ST0_XX;
+ change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+ status_set);
/*
* Some MIPS CPUs have a dedicated interrupt vector which reduces the
@@ -902,7 +909,7 @@ void __init per_cpu_trap_init(void)
set_c0_cause(CAUSEF_IV);
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
- write_c0_context(cpu << 23);
+ TLBMISS_HANDLER_SETUP();
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
@@ -918,8 +925,6 @@ void __init trap_init(void)
extern char except_vec4;
unsigned long i;
- per_cpu_trap_init();
-
/* Copy the generic exception handler code to it's final destination. */
memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80);
@@ -1020,10 +1025,5 @@ void __init trap_init(void)
flush_icache_range(KSEG0, KSEG0 + 0x400);
- atomic_inc(&init_mm.mm_count); /* XXX UP? */
- current->active_mm = &init_mm;
-
- /* XXX Must be done for all CPUs */
- current_cpu_data.asid_cache = ASID_FIRST_VERSION;
- TLBMISS_HANDLER_SETUP();
+ per_cpu_trap_init();
}
Index: linux-2.4.35.4/arch/mips/lib/rtc-no.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/lib/rtc-no.c
+++ linux-2.4.35.4/arch/mips/lib/rtc-no.c
@@ -6,10 +6,9 @@
* Stub RTC routines to keep Linux from crashing on machine which don't
* have a RTC chip.
*
- * Copyright (C) 1998, 2001 by Ralf Baechle
+ * Copyright (C) 1998, 2001, 2005 by Ralf Baechle
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/mc146818rtc.h>
static unsigned int shouldnt_happen(void)
@@ -29,5 +28,3 @@ struct rtc_ops no_rtc_ops = {
.rtc_write_data = (void *) &shouldnt_happen,
.rtc_bcd_mode = (void *) &shouldnt_happen
};
-
-EXPORT_SYMBOL(rtc_ops);
Index: linux-2.4.35.4/arch/mips/lib/rtc-std.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/lib/rtc-std.c
+++ linux-2.4.35.4/arch/mips/lib/rtc-std.c
@@ -5,9 +5,8 @@
*
* RTC routines for PC style attached Dallas chip.
*
- * Copyright (C) 1998, 2001 by Ralf Baechle
+ * Copyright (C) 1998, 2001, 05 by Ralf Baechle
*/
-#include <linux/module.h>
#include <linux/mc146818rtc.h>
#include <asm/io.h>
@@ -33,5 +32,3 @@ struct rtc_ops std_rtc_ops = {
&std_rtc_write_data,
&std_rtc_bcd_mode
};
-
-EXPORT_SYMBOL(rtc_ops);
Index: linux-2.4.35.4/arch/mips/Makefile
===================================================================
--- linux-2.4.35.4.orig/arch/mips/Makefile
+++ linux-2.4.35.4/arch/mips/Makefile
@@ -209,7 +209,7 @@ LOADADDR := 0x80080000
endif
#
-# Au1000 (Alchemy Semi PB1000) eval board
+# Au1x AMD Alchemy eval boards
#
ifdef CONFIG_MIPS_PB1000
LIBS += arch/mips/au1000/pb1000/pb1000.o \
@@ -218,9 +218,6 @@ SUBDIRS += arch/mips/au1000/pb1000 arch
LOADADDR := 0x80100000
endif
-#
-# Au1100 (Alchemy Semi PB1100) eval board
-#
ifdef CONFIG_MIPS_PB1100
LIBS += arch/mips/au1000/pb1100/pb1100.o \
arch/mips/au1000/common/au1000.o
@@ -228,9 +225,6 @@ SUBDIRS += arch/mips/au1000/pb1100
LOADADDR += 0x80100000
endif
-#
-# Au1500 (Alchemy Semi PB1500) eval board
-#
ifdef CONFIG_MIPS_PB1500
LIBS += arch/mips/au1000/pb1500/pb1500.o \
arch/mips/au1000/common/au1000.o
@@ -238,9 +232,6 @@ SUBDIRS += arch/mips/au1000/pb1500 arch
LOADADDR := 0x80100000
endif
-#
-# Au1x00 (AMD/Alchemy) eval boards
-#
ifdef CONFIG_MIPS_DB1000
LIBS += arch/mips/au1000/db1x00/db1x00.o \
arch/mips/au1000/common/au1000.o
@@ -311,6 +302,27 @@ SUBDIRS += arch/mips/au1000/pb1550
LOADADDR += 0x80100000
endif
+ifdef CONFIG_MIPS_PB1200
+LIBS += arch/mips/au1000/pb1200/pb1200.o \
+ arch/mips/au1000/common/au1000.o
+SUBDIRS += arch/mips/au1000/pb1200 arch/mips/au1000/common
+LOADADDR += 0x80100000
+endif
+
+ifdef CONFIG_MIPS_DB1200
+LIBS += arch/mips/au1000/pb1200/pb1200.o \
+ arch/mips/au1000/common/au1000.o
+SUBDIRS += arch/mips/au1000/pb1200 arch/mips/au1000/common
+LOADADDR += 0x80100000
+endif
+
+ifdef CONFIG_MIPS_FICMMP
+LIBS += arch/mips/au1000/ficmmp/ficmmp.o \
+ arch/mips/au1000/common/au1000.o
+SUBDIRS += arch/mips/au1000/ficmmp arch/mips/au1000/common
+LOADADDR += 0x80100000
+endif
+
#
# Cogent CSB250
Index: linux-2.4.35.4/arch/mips/mm/cerr-sb1.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/mm/cerr-sb1.c
+++ linux-2.4.35.4/arch/mips/mm/cerr-sb1.c
@@ -252,14 +252,14 @@ static const uint8_t parity[256] = {
/* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */
static const uint64_t mask_72_64[8] = {
- 0x0738C808099264FFL,
- 0x38C808099264FF07L,
- 0xC808099264FF0738L,
- 0x08099264FF0738C8L,
- 0x099264FF0738C808L,
- 0x9264FF0738C80809L,
- 0x64FF0738C8080992L,
- 0xFF0738C808099264L
+ 0x0738C808099264FFULL,
+ 0x38C808099264FF07ULL,
+ 0xC808099264FF0738ULL,
+ 0x08099264FF0738C8ULL,
+ 0x099264FF0738C808ULL,
+ 0x9264FF0738C80809ULL,
+ 0x64FF0738C8080992ULL,
+ 0xFF0738C808099264ULL
};
/* Calculate the parity on a range of bits */
@@ -331,9 +331,9 @@ static uint32_t extract_ic(unsigned shor
((lru >> 4) & 0x3),
((lru >> 6) & 0x3));
}
- va = (taglo & 0xC0000FFFFFFFE000) | addr;
+ va = (taglo & 0xC0000FFFFFFFE000ULL) | addr;
if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3))
- va |= 0x3FFFF00000000000;
+ va |= 0x3FFFF00000000000ULL;
valid = ((taghi >> 29) & 1);
if (valid) {
tlo_tmp = taglo & 0xfff3ff;
@@ -474,7 +474,7 @@ static uint32_t extract_dc(unsigned shor
: "r" ((way << 13) | addr));
taglo = ((unsigned long long)taglohi << 32) | taglolo;
- pa = (taglo & 0xFFFFFFE000) | addr;
+ pa = (taglo & 0xFFFFFFE000ULL) | addr;
if (way == 0) {
lru = (taghi >> 14) & 0xff;
prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
Index: linux-2.4.35.4/arch/mips/mm/c-r4k.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/mm/c-r4k.c
+++ linux-2.4.35.4/arch/mips/mm/c-r4k.c
@@ -867,9 +867,16 @@ static void __init probe_pcache(void)
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
*/
- if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
- if (c->dcache.waysize > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
+ switch (c->cputype) {
+ case CPU_R10000:
+ case CPU_R12000:
+ break;
+ case CPU_24K:
+ if (!(read_c0_config7() & (1 << 16)))
+ default:
+ if (c->dcache.waysize > PAGE_SIZE)
+ c->dcache.flags |= MIPS_CACHE_ALIASES;
+ }
switch (c->cputype) {
case CPU_20KC:
@@ -1069,9 +1076,6 @@ void __init ld_mmu_r4xx0(void)
probe_pcache();
setup_scache();
- if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
-
r4k_blast_dcache_page_setup();
r4k_blast_dcache_page_indexed_setup();
r4k_blast_dcache_setup();
Index: linux-2.4.35.4/arch/mips/mm/tlbex-mips32.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips/mm/tlbex-mips32.S
+++ linux-2.4.35.4/arch/mips/mm/tlbex-mips32.S
@@ -196,7 +196,7 @@
.set noat; \
SAVE_ALL; \
mfc0 a2, CP0_BADVADDR; \
- STI; \
+ KMODE; \
.set at; \
move a0, sp; \
jal do_page_fault; \
Index: linux-2.4.35.4/arch/mips/mm/tlbex-r4k.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips/mm/tlbex-r4k.S
+++ linux-2.4.35.4/arch/mips/mm/tlbex-r4k.S
@@ -184,13 +184,10 @@
P_MTC0 k0, CP0_ENTRYLO0 # load it
PTE_SRL k1, k1, 6 # convert to entrylo1
P_MTC0 k1, CP0_ENTRYLO1 # load it
- b 1f
- rm9000_tlb_hazard
+ mtc0_tlbw_hazard
tlbwr # write random tlb entry
-1:
- nop
- rm9000_tlb_hazard
- eret # return from trap
+ tlbw_eret_hazard
+ eret
END(except_vec0_r4000)
/* TLB refill, EXL == 0, R4600 version */
@@ -468,13 +465,9 @@ invalid_tlbl:
PTE_PRESENT(k0, k1, nopage_tlbl)
PTE_MAKEVALID(k0, k1)
PTE_RELOAD(k1, k0)
- rm9000_tlb_hazard
- nop
- b 1f
- tlbwi
-1:
- nop
- rm9000_tlb_hazard
+ mtc0_tlbw_hazard
+ tlbwi
+ tlbw_eret_hazard
.set mips3
eret
.set mips0
@@ -496,13 +489,9 @@ nopage_tlbl:
PTE_WRITABLE(k0, k1, nopage_tlbs)
PTE_MAKEWRITE(k0, k1)
PTE_RELOAD(k1, k0)
- rm9000_tlb_hazard
- nop
- b 1f
- tlbwi
-1:
- nop
- rm9000_tlb_hazard
+ mtc0_tlbw_hazard
+ tlbwi
+ tlbw_eret_hazard
.set mips3
eret
.set mips0
@@ -529,13 +518,9 @@ nopage_tlbs:
/* Now reload the entry into the tlb. */
PTE_RELOAD(k1, k0)
- rm9000_tlb_hazard
- nop
- b 1f
- tlbwi
-1:
- rm9000_tlb_hazard
- nop
+ mtc0_tlbw_hazard
+ tlbwi
+ tlbw_eret_hazard
.set mips3
eret
.set mips0
Index: linux-2.4.35.4/arch/mips/mm/tlb-r4k.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips/mm/tlb-r4k.c
+++ linux-2.4.35.4/arch/mips/mm/tlb-r4k.c
@@ -3,17 +3,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * r4xx0.c: R4000 processor variant specific MMU/Cache routines.
- *
* Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
* Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org
- *
- * To do:
- *
- * - this code is a overbloated pig
- * - many of the bug workarounds are not efficient at all, but at
- * least they are functional ...
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
*/
+#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
@@ -25,9 +20,6 @@
#include <asm/pgtable.h>
#include <asm/system.h>
-#undef DEBUG_TLB
-#undef DEBUG_TLBUPDATE
-
extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600;
/* CP0 hazard avoidance. */
@@ -41,33 +33,23 @@ void local_flush_tlb_all(void)
unsigned long old_ctx;
int entry;
-#ifdef DEBUG_TLB
- printk("[tlball]");
-#endif
-
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
- BARRIER;
entry = read_c0_wired();
/* Blast 'em all away. */
while (entry < current_cpu_data.tlbsize) {
- /*
- * Make sure all entries differ. If they're not different
- * MIPS32 will take revenge ...
- */
write_c0_entryhi(KSEG0 + entry*0x2000);
write_c0_index(entry);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
entry++;
}
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(old_ctx);
local_irq_restore(flags);
}
@@ -76,12 +58,8 @@ void local_flush_tlb_mm(struct mm_struct
{
int cpu = smp_processor_id();
- if (cpu_context(cpu, mm) != 0) {
-#ifdef DEBUG_TLB
- printk("[tlbmm<%d>]", cpu_context(cpu, mm));
-#endif
+ if (cpu_context(cpu, mm) != 0)
drop_mmu_context(mm,cpu);
- }
}
void local_flush_tlb_range(struct mm_struct *mm, unsigned long start,
@@ -93,10 +71,6 @@ void local_flush_tlb_range(struct mm_str
unsigned long flags;
int size;
-#ifdef DEBUG_TLB
- printk("[tlbrange<%02x,%08lx,%08lx>]",
- cpu_asid(cpu, mm), start, end);
-#endif
local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
@@ -112,7 +86,7 @@ void local_flush_tlb_range(struct mm_str
write_c0_entryhi(start | newpid);
start += (PAGE_SIZE << 1);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
idx = read_c0_index();
@@ -122,10 +96,10 @@ void local_flush_tlb_range(struct mm_str
continue;
/* Make sure all entries differ. */
write_c0_entryhi(KSEG0 + idx*0x2000);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
}
+ tlbw_use_hazard();
write_c0_entryhi(oldpid);
} else {
drop_mmu_context(mm, cpu);
@@ -138,34 +112,30 @@ void local_flush_tlb_page(struct vm_area
{
int cpu = smp_processor_id();
- if (!vma || cpu_context(cpu, vma->vm_mm) != 0) {
+ if (cpu_context(cpu, vma->vm_mm) != 0) {
unsigned long flags;
- int oldpid, newpid, idx;
+ unsigned long oldpid, newpid, idx;
-#ifdef DEBUG_TLB
- printk("[tlbpage<%d,%08lx>]", cpu_context(cpu, vma->vm_mm),
- page);
-#endif
newpid = cpu_asid(cpu, vma->vm_mm);
page &= (PAGE_MASK << 1);
local_irq_save(flags);
oldpid = read_c0_entryhi();
write_c0_entryhi(page | newpid);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
- if(idx < 0)
+ if (idx < 0)
goto finish;
/* Make sure all entries differ. */
write_c0_entryhi(KSEG0+idx*0x2000);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
+ tlbw_use_hazard();
finish:
- BARRIER;
write_c0_entryhi(oldpid);
local_irq_restore(flags);
}
@@ -185,7 +155,7 @@ void local_flush_tlb_one(unsigned long p
local_irq_save(flags);
write_c0_entryhi(page);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
idx = read_c0_index();
@@ -194,18 +164,19 @@ void local_flush_tlb_one(unsigned long p
if (idx >= 0) {
/* Make sure all entries differ. */
write_c0_entryhi(KSEG0+idx*0x2000);
+ mtc0_tlbw_hazard();
tlb_write_indexed();
+ tlbw_use_hazard();
}
- BARRIER;
write_c0_entryhi(oldpid);
+
local_irq_restore(flags);
}
EXPORT_SYMBOL(local_flush_tlb_one);
-/* We will need multiple versions of update_mmu_cache(), one that just
- * updates the TLB with the new pte(s), and another which also checks
- * for the R4k "end of page" hardware bug and does the needy.
+/*
+ * Updates the TLB with the new pte(s).
*/
void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
{
@@ -223,25 +194,16 @@ void __update_tlb(struct vm_area_struct
pid = read_c0_entryhi() & ASID_MASK;
-#ifdef DEBUG_TLB
- if ((pid != cpu_asid(cpu, vma->vm_mm)) ||
- (cpu_context(vma->vm_mm) == 0)) {
- printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d "
- "tlbpid=%d\n", (int) (cpu_asid(cpu, vma->vm_mm)), pid);
- }
-#endif
-
local_irq_save(flags);
address &= (PAGE_MASK << 1);
write_c0_entryhi(address | pid);
pgdp = pgd_offset(vma->vm_mm, address);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
pmdp = pmd_offset(pgdp, address);
idx = read_c0_index();
ptep = pte_offset(pmdp, address);
- BARRIER;
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
write_c0_entrylo0(ptep->pte_high);
ptep++;
@@ -251,15 +213,13 @@ void __update_tlb(struct vm_area_struct
write_c0_entrylo1(pte_val(*ptep) >> 6);
#endif
write_c0_entryhi(address | pid);
- BARRIER;
- if (idx < 0) {
+ mtc0_tlbw_hazard();
+ if (idx < 0)
tlb_write_random();
- } else {
+ else
tlb_write_indexed();
- }
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(pid);
- BARRIER;
local_irq_restore(flags);
}
@@ -279,24 +239,26 @@ static void r4k_update_mmu_cache_hwbug(s
asid = read_c0_entryhi() & ASID_MASK;
write_c0_entryhi(address | asid);
pgdp = pgd_offset(vma->vm_mm, address);
+ mtc0_tlbw_hazard();
tlb_probe();
+ BARRIER;
pmdp = pmd_offset(pgdp, address);
idx = read_c0_index();
ptep = pte_offset(pmdp, address);
write_c0_entrylo0(pte_val(*ptep++) >> 6);
write_c0_entrylo1(pte_val(*ptep) >> 6);
- BARRIER;
+ mtc0_tlbw_hazard();
if (idx < 0)
tlb_write_random();
else
tlb_write_indexed();
- BARRIER;
+ tlbw_use_hazard();
local_irq_restore(flags);
}
#endif
void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
+ unsigned long entryhi, unsigned long pagemask)
{
unsigned long flags;
unsigned long wired;
@@ -315,9 +277,9 @@ void __init add_wired_entry(unsigned lon
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
write_c0_entrylo1(entrylo1);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(old_ctx);
BARRIER;
@@ -355,17 +317,15 @@ __init int add_temporary_entry(unsigned
}
write_c0_index(temp_tlb_entry);
- BARRIER;
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
write_c0_entrylo1(entrylo1);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(old_ctx);
- BARRIER;
write_c0_pagemask(old_pagemask);
out:
local_irq_restore(flags);
@@ -375,7 +335,7 @@ out:
static void __init probe_tlb(unsigned long config)
{
struct cpuinfo_mips *c = &current_cpu_data;
- unsigned int reg;
+ unsigned int config1;
/*
* If this isn't a MIPS32 / MIPS64 compliant CPU. Config 1 register
@@ -385,16 +345,16 @@ static void __init probe_tlb(unsigned lo
if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
return;
- reg = read_c0_config1();
+ config1 = read_c0_config1();
if (!((config >> 7) & 3))
panic("No TLB present");
- c->tlbsize = ((reg >> 25) & 0x3f) + 1;
+ c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
}
void __init r4k_tlb_init(void)
{
- u32 config = read_c0_config();
+ unsigned int config = read_c0_config();
/*
* You should never change this register:
Index: linux-2.4.35.4/arch/mips64/defconfig
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig
+++ linux-2.4.35.4/arch/mips64/defconfig
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -470,9 +470,11 @@ CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -658,7 +660,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-atlas
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-atlas
+++ linux-2.4.35.4/arch/mips64/defconfig-atlas
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -232,11 +232,6 @@ CONFIG_IP_PNP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -314,9 +309,11 @@ CONFIG_SD_EXTRA_DEVS=40
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -474,7 +471,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-decstation
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-decstation
+++ linux-2.4.35.4/arch/mips64/defconfig-decstation
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -224,11 +224,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -307,9 +302,11 @@ CONFIG_SCSI_DECNCR=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -477,7 +474,6 @@ CONFIG_SERIAL_DEC=y
CONFIG_SERIAL_DEC_CONSOLE=y
# CONFIG_DZ is not set
CONFIG_ZS=y
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-ip22
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-ip22
+++ linux-2.4.35.4/arch/mips64/defconfig-ip22
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -235,11 +235,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -319,9 +314,11 @@ CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -488,7 +485,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_TXX9_CONSOLE is not set
# CONFIG_TXX927_SERIAL is not set
CONFIG_IP22_SERIAL=y
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-ip27
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-ip27
+++ linux-2.4.35.4/arch/mips64/defconfig-ip27
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -470,9 +470,11 @@ CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -658,7 +660,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-jaguar
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-jaguar
+++ linux-2.4.35.4/arch/mips64/defconfig-jaguar
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -227,11 +227,6 @@ CONFIG_IP_PNP_DHCP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -403,7 +398,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_TXX9 is not set
# CONFIG_SERIAL_TXX9_CONSOLE is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-malta
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-malta
+++ linux-2.4.35.4/arch/mips64/defconfig-malta
@@ -22,16 +22,19 @@ CONFIG_KMOD=y
#
# CONFIG_ACER_PICA_61 is not set
# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_FICMMP is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -146,9 +149,9 @@ CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_MIPS32_COMPAT=y
CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
CONFIG_BINFMT_ELF32=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
# CONFIG_OOM_KILLER is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -235,11 +238,6 @@ CONFIG_IP_PNP_BOOTP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -271,8 +269,83 @@ CONFIG_IP_PNP_BOOTP=y
#
# ATA/IDE/MFM/RLL support
#
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_IDEDMA_FORCED=y
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_PCI_WIP is not set
+# CONFIG_BLK_DEV_ADMA100 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_WDC_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_AMD74XX_OVERRIDE is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_HPT34X_AUTODMA is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_PDC202XX_BURST is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
#
# SCSI support
@@ -317,9 +390,11 @@ CONFIG_SD_EXTRA_DEVS=40
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
@@ -477,7 +552,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-ocelotc
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-ocelotc
+++ linux-2.4.35.4/arch/mips64/defconfig-ocelotc
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -231,11 +231,6 @@ CONFIG_IP_PNP_DHCP=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -453,7 +448,6 @@ CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_SERIAL_TXX9 is not set
# CONFIG_SERIAL_TXX9_CONSOLE is not set
# CONFIG_TXX927_SERIAL is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-sb1250-swarm
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-sb1250-swarm
+++ linux-2.4.35.4/arch/mips64/defconfig-sb1250-swarm
@@ -30,8 +30,8 @@ CONFIG_KMOD=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -90,6 +90,7 @@ CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_SIBYTE_GENBUS_IDE=y
CONFIG_SMP_CAPABLE=y
+CONFIG_MIPS_RTC=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TANBAC_TB0226 is not set
# CONFIG_TANBAC_TB0229 is not set
@@ -253,11 +254,6 @@ CONFIG_INET=y
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# Appletalk devices
-#
-# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
@@ -432,7 +428,6 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SIBYTE_SB1250_DUART=y
CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
CONFIG_SERIAL_CONSOLE=y
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
Index: linux-2.4.35.4/arch/mips64/defconfig-sead
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/defconfig-sead
+++ linux-2.4.35.4/arch/mips64/defconfig-sead
@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_HYDROGEN3 is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_COGENT_CSB250 is not set
@@ -242,7 +242,6 @@ CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set
# CONFIG_UNIX98_PTYS is not set
#
Index: linux-2.4.35.4/arch/mips64/kernel/binfmt_elfn32.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/binfmt_elfn32.c
+++ linux-2.4.35.4/arch/mips64/kernel/binfmt_elfn32.c
@@ -116,4 +116,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
#include "../../../fs/binfmt_elf.c"
Index: linux-2.4.35.4/arch/mips64/kernel/binfmt_elfo32.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/binfmt_elfo32.c
+++ linux-2.4.35.4/arch/mips64/kernel/binfmt_elfo32.c
@@ -137,4 +137,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-
#undef MODULE_DESCRIPTION
#undef MODULE_AUTHOR
+#undef TASK_SIZE
+#define TASK_SIZE TASK_SIZE32
+
#include "../../../fs/binfmt_elf.c"
Index: linux-2.4.35.4/arch/mips64/kernel/head.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/head.S
+++ linux-2.4.35.4/arch/mips64/kernel/head.S
@@ -91,6 +91,21 @@ EXPORT(_stext)
__INIT
NESTED(kernel_entry, 16, sp) # kernel entry point
+ .set push
+ /*
+ * For the moment disable interrupts, mark the kernel mode and
+ * set ST0_KX so that the CPU does not spit fire when using
+ * 64-bit addresses. A full initialization of the CPU's status
+ * register is done later in per_cpu_trap_init().
+ */
+ mfc0 t0, CP0_STATUS
+ or t0, ST0_CU0|ST0_KX|0x1f
+ xor t0, 0x1f
+ mtc0 t0, CP0_STATUS
+
+ .set noreorder
+ sll zero,3 # ehb
+ .set reorder
ori sp, 0xf # align stack on 16 byte.
xori sp, 0xf
@@ -103,8 +118,6 @@ NESTED(kernel_entry, 16, sp) # kernel
ARC64_TWIDDLE_PC
- CLI # disable interrupts
-
/*
* The firmware/bootloader passes argc/argp/envp
* to us as arguments. But clear bss first because
@@ -125,6 +138,7 @@ NESTED(kernel_entry, 16, sp) # kernel
dsubu sp, 4*SZREG # init stack pointer
j init_arch
+ .set pop
END(kernel_entry)
#ifdef CONFIG_SMP
@@ -133,6 +147,23 @@ NESTED(kernel_entry, 16, sp) # kernel
* function after setting up the stack and gp registers.
*/
NESTED(smp_bootstrap, 16, sp)
+ .set push
+ /*
+ * For the moment disable interrupts and bootstrap exception
+ * vectors, mark the kernel mode and set ST0_KX so that the CPU
+ * does not spit fire when using 64-bit addresses. A full
+ * initialization of the CPU's status register is done later in
+ * per_cpu_trap_init().
+ */
+ mfc0 t0, CP0_STATUS
+ or t0, ST0_CU0|ST0_BEV|ST0_KX|0x1f
+ xor t0, ST0_BEV|0x1f
+ mtc0 t0, CP0_STATUS
+
+ .set noreorder
+ sll zero,3 # ehb
+ .set reorder
+
#ifdef CONFIG_SGI_IP27
GET_NASID_ASM t1
dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \
@@ -146,19 +177,8 @@ NESTED(smp_bootstrap, 16, sp)
ARC64_TWIDDLE_PC
#endif /* CONFIG_SGI_IP27 */
- CLI
-
- /*
- * For the moment set ST0_KU so the CPU will not spit fire when
- * executing 64-bit instructions. The full initialization of the
- * CPU's status register is done later in per_cpu_trap_init().
- */
- mfc0 t0, CP0_STATUS
- or t0, ST0_KX
- mtc0 t0, CP0_STATUS
-
jal start_secondary # XXX: IP27: cboot
-
+ .set pop
END(smp_bootstrap)
#endif /* CONFIG_SMP */
Index: linux-2.4.35.4/arch/mips64/kernel/ioctl32.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/ioctl32.c
+++ linux-2.4.35.4/arch/mips64/kernel/ioctl32.c
@@ -2352,7 +2352,7 @@ static struct ioctl32_list ioctl32_handl
IOCTL32_HANDLER(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout),
IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE),
IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE_MULTI),
- IOCTL32_DEFAULT(AUTOFS_IOC_PROTSUBVER),
+ IOCTL32_DEFAULT(AUTOFS_IOC_PROTOSUBVER),
IOCTL32_DEFAULT(AUTOFS_IOC_ASKREGHOST),
IOCTL32_DEFAULT(AUTOFS_IOC_TOGGLEREGHOST),
IOCTL32_DEFAULT(AUTOFS_IOC_ASKUMOUNT),
Index: linux-2.4.35.4/arch/mips64/kernel/linux32.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/linux32.c
+++ linux-2.4.35.4/arch/mips64/kernel/linux32.c
@@ -1101,6 +1101,7 @@ do_readv_writev32(int type, struct file
* specially as they have atomicity guarantees and can handle
* iovec's natively
*/
+ inode = file->f_dentry->d_inode;
if (inode->i_sock) {
int err;
err = sock_readv_writev(type, inode, file, iov, count, tot_len);
@@ -1187,72 +1188,19 @@ bad_file:
lseek back to original location. They fail just like lseek does on
non-seekable files. */
-asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf,
- size_t count, u32 unused, u64 a4, u64 a5)
+asmlinkage ssize_t sys32_pread(unsigned int fd, char *buf,
+ size_t count, u32 unused, u64 a4, u64 a5)
{
- ssize_t ret;
- struct file * file;
- ssize_t (*read)(struct file *, char *, size_t, loff_t *);
- loff_t pos;
-
- ret = -EBADF;
- file = fget(fd);
- if (!file)
- goto bad_file;
- if (!(file->f_mode & FMODE_READ))
- goto out;
- pos = merge_64(a4, a5);
- ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode,
- file, pos, count);
- if (ret)
- goto out;
- ret = -EINVAL;
- if (!file->f_op || !(read = file->f_op->read))
- goto out;
- if (pos < 0)
- goto out;
- ret = read(file, buf, count, &pos);
- if (ret > 0)
- dnotify_parent(file->f_dentry, DN_ACCESS);
-out:
- fput(file);
-bad_file:
- return ret;
+ return sys_pread(fd, buf, count, merge_64(a4, a5));
}
asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf,
size_t count, u32 unused, u64 a4, u64 a5)
{
- ssize_t ret;
- struct file * file;
- ssize_t (*write)(struct file *, const char *, size_t, loff_t *);
- loff_t pos;
+ return sys_pwrite(fd, buf, count, merge_64(a4, a5));
+}
- ret = -EBADF;
- file = fget(fd);
- if (!file)
- goto bad_file;
- if (!(file->f_mode & FMODE_WRITE))
- goto out;
- pos = merge_64(a4, a5);
- ret = locks_verify_area(FLOCK_VERIFY_WRITE, file->f_dentry->d_inode,
- file, pos, count);
- if (ret)
- goto out;
- ret = -EINVAL;
- if (!file->f_op || !(write = file->f_op->write))
- goto out;
- if (pos < 0)
- goto out;
- ret = write(file, buf, count, &pos);
- if (ret > 0)
- dnotify_parent(file->f_dentry, DN_MODIFY);
-out:
- fput(file);
-bad_file:
- return ret;
-}
/*
* Ooo, nasty. We need here to frob 32-bit unsigned longs to
* 64-bit unsigned longs.
Index: linux-2.4.35.4/arch/mips64/kernel/process.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/process.c
+++ linux-2.4.35.4/arch/mips64/kernel/process.c
@@ -125,6 +125,25 @@ int dump_fpu(struct pt_regs *regs, elf_f
return 1;
}
+void dump_regs(elf_greg_t *gp, struct pt_regs *regs)
+{
+ int i;
+
+ for (i = 0; i < EF_REG0; i++)
+ gp[i] = 0;
+ gp[EF_REG0] = 0;
+ for (i = 1; i <= 31; i++)
+ gp[EF_REG0 + i] = regs->regs[i];
+ gp[EF_REG26] = 0;
+ gp[EF_REG27] = 0;
+ gp[EF_LO] = regs->lo;
+ gp[EF_HI] = regs->hi;
+ gp[EF_CP0_EPC] = regs->cp0_epc;
+ gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr;
+ gp[EF_CP0_STATUS] = regs->cp0_status;
+ gp[EF_CP0_CAUSE] = regs->cp0_cause;
+}
+
/*
* Create a kernel thread
*/
Index: linux-2.4.35.4/arch/mips64/kernel/scall_64.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/scall_64.S
+++ linux-2.4.35.4/arch/mips64/kernel/scall_64.S
@@ -102,15 +102,14 @@ _64_reschedule:
trace_a_syscall:
SAVE_STATIC
- sd t2,PT_R1(sp)
+ move s0, t2
jal syscall_trace
- ld t2,PT_R1(sp)
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a2, PT_R6(sp)
ld a3, PT_R7(sp)
- jalr t2
+ jalr s0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
Index: linux-2.4.35.4/arch/mips64/kernel/scall_n32.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/scall_n32.S
+++ linux-2.4.35.4/arch/mips64/kernel/scall_n32.S
@@ -106,15 +106,14 @@ n32_reschedule:
trace_a_syscall:
SAVE_STATIC
- sd t2,PT_R1(sp)
+ move s0, t2
jal syscall_trace
- ld t2,PT_R1(sp)
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a2, PT_R6(sp)
ld a3, PT_R7(sp)
- jalr t2
+ jalr s0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
Index: linux-2.4.35.4/arch/mips64/kernel/scall_o32.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/scall_o32.S
+++ linux-2.4.35.4/arch/mips64/kernel/scall_o32.S
@@ -118,9 +118,8 @@ trace_a_syscall:
sd a6, PT_R10(sp)
sd a7, PT_R11(sp)
- sd t2,PT_R1(sp)
+ move s0, t2
jal syscall_trace
- ld t2,PT_R1(sp)
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
@@ -129,7 +128,7 @@ trace_a_syscall:
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
- jalr t2
+ jalr s0
li t0, -EMAXERRNO - 1 # error?
sltu t0, t0, v0
@@ -576,6 +575,8 @@ out: jr ra
sys_call_table:
syscalltable
+ .purgem sys
+
.macro sys function, nargs
.byte \nargs
.endm
Index: linux-2.4.35.4/arch/mips64/kernel/setup.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/setup.c
+++ linux-2.4.35.4/arch/mips64/kernel/setup.c
@@ -129,14 +129,6 @@ asmlinkage void __init init_arch(int arg
*/
load_mmu();
- /*
- * On IP27, I am seeing the TS bit set when the kernel is loaded.
- * Maybe because the kernel is in ckseg0 and not xkphys? Clear it
- * anyway ...
- */
- clear_c0_status(ST0_BEV|ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3);
- set_c0_status(ST0_CU0|ST0_KX|ST0_SX|ST0_FR);
-
start_kernel();
}
Index: linux-2.4.35.4/arch/mips64/kernel/signal_n32.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/signal_n32.c
+++ linux-2.4.35.4/arch/mips64/kernel/signal_n32.c
@@ -68,7 +68,7 @@ struct rt_sigframe_n32 {
};
extern asmlinkage int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc);
-extern int inline setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc);
+extern int setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc);
asmlinkage void sysn32_rt_sigreturn(abi64_no_regargs, struct pt_regs regs)
{
Index: linux-2.4.35.4/arch/mips64/kernel/traps.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/kernel/traps.c
+++ linux-2.4.35.4/arch/mips64/kernel/traps.c
@@ -462,9 +462,10 @@ static inline void simulate_ll(struct pt
}
ll_task = current;
+ compute_return_epc(regs);
+
regs->regs[(opcode & RT) >> 16] = value;
- compute_return_epc(regs);
return;
sig:
@@ -495,8 +496,8 @@ static inline void simulate_sc(struct pt
goto sig;
}
if (ll_bit == 0 || ll_task != current) {
- regs->regs[reg] = 0;
compute_return_epc(regs);
+ regs->regs[reg] = 0;
return;
}
@@ -505,9 +506,9 @@ static inline void simulate_sc(struct pt
goto sig;
}
+ compute_return_epc(regs);
regs->regs[reg] = 1;
- compute_return_epc(regs);
return;
sig:
@@ -809,13 +810,18 @@ extern asmlinkage int fpu_emulator_resto
void __init per_cpu_trap_init(void)
{
unsigned int cpu = smp_processor_id();
+ unsigned int status_set = ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX;
- /* Some firmware leaves the BEV flag set, clear it. */
- clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_BEV);
- set_c0_status(ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX);
-
+ /*
+ * Disable coprocessors, enable 64-bit addressing and set FPU
+ * for the 32/32 FPR register model. Reset the BEV flag that
+ * some firmware may have left set and the TS bit (for IP27).
+ * Set XX for ISA IV code to work.
+ */
if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
- set_c0_status(ST0_XX);
+ status_set |= ST0_XX;
+ change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
+ status_set);
/*
* Some MIPS CPUs have a dedicated interrupt vector which reduces the
@@ -825,13 +831,11 @@ void __init per_cpu_trap_init(void)
set_c0_cause(CAUSEF_IV);
cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
- write_c0_context(((long)(&pgd_current[cpu])) << 23);
- write_c0_wired(0);
+ TLBMISS_HANDLER_SETUP();
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
- if (current->mm)
- BUG();
+ BUG_ON(current->mm);
enter_lazy_tlb(&init_mm, current, cpu);
}
@@ -842,8 +846,6 @@ void __init trap_init(void)
extern char except_vec4;
unsigned long i;
- per_cpu_trap_init();
-
/* Copy the generic exception handlers to their final destination. */
memcpy((void *) KSEG0 , &except_vec0_generic, 0x80);
memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80);
@@ -933,6 +935,5 @@ void __init trap_init(void)
flush_icache_range(KSEG0, KSEG0 + 0x400);
- atomic_inc(&init_mm.mm_count); /* XXX UP? */
- current->active_mm = &init_mm;
+ per_cpu_trap_init();
}
Index: linux-2.4.35.4/arch/mips64/mm/cerr-sb1.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/mm/cerr-sb1.c
+++ linux-2.4.35.4/arch/mips64/mm/cerr-sb1.c
@@ -252,14 +252,14 @@ static const uint8_t parity[256] = {
/* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */
static const uint64_t mask_72_64[8] = {
- 0x0738C808099264FFL,
- 0x38C808099264FF07L,
- 0xC808099264FF0738L,
- 0x08099264FF0738C8L,
- 0x099264FF0738C808L,
- 0x9264FF0738C80809L,
- 0x64FF0738C8080992L,
- 0xFF0738C808099264L
+ 0x0738C808099264FFULL,
+ 0x38C808099264FF07ULL,
+ 0xC808099264FF0738ULL,
+ 0x08099264FF0738C8ULL,
+ 0x099264FF0738C808ULL,
+ 0x9264FF0738C80809ULL,
+ 0x64FF0738C8080992ULL,
+ 0xFF0738C808099264ULL
};
/* Calculate the parity on a range of bits */
@@ -331,9 +331,9 @@ static uint32_t extract_ic(unsigned shor
((lru >> 4) & 0x3),
((lru >> 6) & 0x3));
}
- va = (taglo & 0xC0000FFFFFFFE000) | addr;
+ va = (taglo & 0xC0000FFFFFFFE000ULL) | addr;
if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3))
- va |= 0x3FFFF00000000000;
+ va |= 0x3FFFF00000000000ULL;
valid = ((taghi >> 29) & 1);
if (valid) {
tlo_tmp = taglo & 0xfff3ff;
@@ -474,7 +474,7 @@ static uint32_t extract_dc(unsigned shor
: "r" ((way << 13) | addr));
taglo = ((unsigned long long)taglohi << 32) | taglolo;
- pa = (taglo & 0xFFFFFFE000) | addr;
+ pa = (taglo & 0xFFFFFFE000ULL) | addr;
if (way == 0) {
lru = (taghi >> 14) & 0xff;
prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
Index: linux-2.4.35.4/arch/mips64/mm/c-r4k.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/mm/c-r4k.c
+++ linux-2.4.35.4/arch/mips64/mm/c-r4k.c
@@ -867,9 +867,16 @@ static void __init probe_pcache(void)
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
*/
- if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000)
- if (c->dcache.waysize > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
+ switch (c->cputype) {
+ case CPU_R10000:
+ case CPU_R12000:
+ break;
+ case CPU_24K:
+ if (!(read_c0_config7() & (1 << 16)))
+ default:
+ if (c->dcache.waysize > PAGE_SIZE)
+ c->dcache.flags |= MIPS_CACHE_ALIASES;
+ }
switch (c->cputype) {
case CPU_20KC:
@@ -1070,9 +1077,6 @@ void __init ld_mmu_r4xx0(void)
setup_scache();
coherency_setup();
- if (c->dcache.sets * c->dcache.ways > PAGE_SIZE)
- c->dcache.flags |= MIPS_CACHE_ALIASES;
-
r4k_blast_dcache_page_setup();
r4k_blast_dcache_page_indexed_setup();
r4k_blast_dcache_setup();
Index: linux-2.4.35.4/arch/mips64/mm/tlbex-r4k.S
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/mm/tlbex-r4k.S
+++ linux-2.4.35.4/arch/mips64/mm/tlbex-r4k.S
@@ -125,6 +125,33 @@ LEAF(except_vec1_r4k)
nop
END(except_vec1_r4k)
+ __FINIT
+
+ .align 5
+LEAF(handle_vec1_r4k)
+ .set noat
+ LOAD_PTE2 k1 k0 9f
+ ld k0, 0(k1) # get even pte
+ ld k1, 8(k1) # get odd pte
+ PTE_RELOAD k0 k1
+ mtc0_tlbw_hazard
+ tlbwr
+ tlbw_eret_hazard
+ eret
+
+9: # handle the vmalloc range
+ LOAD_KPTE2 k1 k0 invalid_vmalloc_address
+ ld k0, 0(k1) # get even pte
+ ld k1, 8(k1) # get odd pte
+ PTE_RELOAD k0 k1
+ mtc0_tlbw_hazard
+ tlbwr
+ tlbw_eret_hazard
+ eret
+END(handle_vec1_r4k)
+
+ __INIT
+
LEAF(except_vec1_sb1)
#if BCM1250_M3_WAR
dmfc0 k0, CP0_BADVADDR
@@ -134,28 +161,24 @@ LEAF(except_vec1_sb1)
bnez k0, 1f
#endif
.set noat
- dla k0, handle_vec1_r4k
+ dla k0, handle_vec1_sb1
jr k0
nop
1: eret
- nop
END(except_vec1_sb1)
__FINIT
.align 5
-LEAF(handle_vec1_r4k)
+LEAF(handle_vec1_sb1)
.set noat
LOAD_PTE2 k1 k0 9f
ld k0, 0(k1) # get even pte
ld k1, 8(k1) # get odd pte
PTE_RELOAD k0 k1
- rm9000_tlb_hazard
- b 1f
- tlbwr
-1: nop
- rm9000_tlb_hazard
+ mtc0_tlbw_hazard
+ tlbwr
eret
9: # handle the vmalloc range
@@ -163,13 +186,10 @@ LEAF(handle_vec1_r4k)
ld k0, 0(k1) # get even pte
ld k1, 8(k1) # get odd pte
PTE_RELOAD k0 k1
- rm9000_tlb_hazard
- b 1f
- tlbwr
-1: nop
- rm9000_tlb_hazard
+ mtc0_tlbw_hazard
+ tlbwr
eret
-END(handle_vec1_r4k)
+END(handle_vec1_sb1)
__INIT
@@ -195,10 +215,8 @@ LEAF(handle_vec1_r10k)
ld k0, 0(k1) # get even pte
ld k1, 8(k1) # get odd pte
PTE_RELOAD k0 k1
- rm9000_tlb_hazard
- nop
+ mtc0_tlbw_hazard
tlbwr
- rm9000_tlb_hazard
eret
9: # handle the vmalloc range
@@ -206,10 +224,8 @@ LEAF(handle_vec1_r10k)
ld k0, 0(k1) # get even pte
ld k1, 8(k1) # get odd pte
PTE_RELOAD k0 k1
- rm9000_tlb_hazard
- nop
+ mtc0_tlbw_hazard
tlbwr
- rm9000_tlb_hazard
eret
END(handle_vec1_r10k)
Index: linux-2.4.35.4/arch/mips64/mm/tlb-r4k.c
===================================================================
--- linux-2.4.35.4.orig/arch/mips64/mm/tlb-r4k.c
+++ linux-2.4.35.4/arch/mips64/mm/tlb-r4k.c
@@ -1,24 +1,12 @@
/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * MIPS64 CPU variant specific MMU routines.
- * These routine are not optimized in any way, they are done in a generic way
- * so they can be used on all MIPS64 compliant CPUs, and also done in an
- * attempt not to break anything for the R4xx0 style CPUs.
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
#include <linux/sched.h>
@@ -30,9 +18,6 @@
#include <asm/pgtable.h>
#include <asm/system.h>
-#undef DEBUG_TLB
-#undef DEBUG_TLBUPDATE
-
extern void except_vec1_r4k(void);
/* CP0 hazard avoidance. */
@@ -46,31 +31,23 @@ void local_flush_tlb_all(void)
unsigned long old_ctx;
int entry;
-#ifdef DEBUG_TLB
- printk("[tlball]");
-#endif
-
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
old_ctx = read_c0_entryhi();
- write_c0_entryhi(XKPHYS);
write_c0_entrylo0(0);
write_c0_entrylo1(0);
- BARRIER;
entry = read_c0_wired();
/* Blast 'em all away. */
- while(entry < current_cpu_data.tlbsize) {
- /* Make sure all entries differ. */
- write_c0_entryhi(XKPHYS+entry*0x2000);
+ while (entry < current_cpu_data.tlbsize) {
+ write_c0_entryhi(XKPHYS + entry*0x2000);
write_c0_index(entry);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
entry++;
}
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(old_ctx);
local_irq_restore(flags);
}
@@ -79,12 +56,8 @@ void local_flush_tlb_mm(struct mm_struct
{
int cpu = smp_processor_id();
- if (cpu_context(cpu, mm) != 0) {
-#ifdef DEBUG_TLB
- printk("[tlbmm<%d>]", mm->context);
-#endif
+ if (cpu_context(cpu, mm) != 0)
drop_mmu_context(mm,cpu);
- }
}
void local_flush_tlb_range(struct mm_struct *mm, unsigned long start,
@@ -96,10 +69,6 @@ void local_flush_tlb_range(struct mm_str
unsigned long flags;
int size;
-#ifdef DEBUG_TLB
- printk("[tlbrange<%02x,%08lx,%08lx>]", (mm->context & ASID_MASK),
- start, end);
-#endif
local_irq_save(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
@@ -110,25 +79,25 @@ void local_flush_tlb_range(struct mm_str
start &= (PAGE_MASK << 1);
end += ((PAGE_SIZE << 1) - 1);
end &= (PAGE_MASK << 1);
- while(start < end) {
+ while (start < end) {
int idx;
write_c0_entryhi(start | newpid);
start += (PAGE_SIZE << 1);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
- if(idx < 0)
+ if (idx < 0)
continue;
/* Make sure all entries differ. */
write_c0_entryhi(XKPHYS+idx*0x2000);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
}
+ tlbw_use_hazard();
write_c0_entryhi(oldpid);
} else {
drop_mmu_context(mm, cpu);
@@ -145,28 +114,26 @@ void local_flush_tlb_page(struct vm_area
unsigned long flags;
unsigned long oldpid, newpid, idx;
-#ifdef DEBUG_TLB
- printk("[tlbpage<%d,%08lx>]", vma->vm_mm->context, page);
-#endif
newpid = cpu_asid(cpu, vma->vm_mm);
page &= (PAGE_MASK << 1);
local_irq_save(flags);
oldpid = read_c0_entryhi();
write_c0_entryhi(page | newpid);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
idx = read_c0_index();
write_c0_entrylo0(0);
write_c0_entrylo1(0);
- if(idx < 0)
+ if (idx < 0)
goto finish;
/* Make sure all entries differ. */
write_c0_entryhi(XKPHYS+idx*0x2000);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
+ tlbw_use_hazard();
+
finish:
- BARRIER;
write_c0_entryhi(oldpid);
local_irq_restore(flags);
}
@@ -186,7 +153,7 @@ void local_flush_tlb_one(unsigned long p
local_irq_save(flags);
write_c0_entryhi(page);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
idx = read_c0_index();
@@ -195,10 +162,12 @@ void local_flush_tlb_one(unsigned long p
if (idx >= 0) {
/* Make sure all entries differ. */
write_c0_entryhi(KSEG0+idx*0x2000);
+ mtc0_tlbw_hazard();
tlb_write_indexed();
+ tlbw_use_hazard();
}
- BARRIER;
write_c0_entryhi(oldpid);
+
local_irq_restore(flags);
}
@@ -208,7 +177,6 @@ void local_flush_tlb_one(unsigned long p
void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
{
unsigned long flags;
- unsigned int asid;
pgd_t *pgdp;
pmd_t *pmdp;
pte_t *ptep;
@@ -222,70 +190,58 @@ void __update_tlb(struct vm_area_struct
pid = read_c0_entryhi() & ASID_MASK;
-#ifdef DEBUG_TLB
- if ((pid != (cpu_asid(smp_processor_id(), vma->vm_mm))) ||
- (cpu_context(smp_processor_id(), vma->vm_mm) == 0)) {
- printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d"
- "tlbpid=%d\n", (int) (cpu_context(smp_processor_id(),
- vma->vm_mm) & ASID_MASK), pid);
- }
-#endif
-
local_irq_save(flags);
address &= (PAGE_MASK << 1);
- write_c0_entryhi(address | (pid));
+ write_c0_entryhi(address | pid);
pgdp = pgd_offset(vma->vm_mm, address);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_probe();
BARRIER;
pmdp = pmd_offset(pgdp, address);
idx = read_c0_index();
ptep = pte_offset(pmdp, address);
- BARRIER;
write_c0_entrylo0(pte_val(*ptep++) >> 6);
write_c0_entrylo1(pte_val(*ptep) >> 6);
- write_c0_entryhi(address | (pid));
- BARRIER;
- if(idx < 0) {
+ write_c0_entryhi(address | pid);
+ mtc0_tlbw_hazard();
+ if (idx < 0)
tlb_write_random();
- } else {
+ else
tlb_write_indexed();
- }
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(pid);
- BARRIER;
local_irq_restore(flags);
}
-void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
+void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
{
- unsigned long flags;
- unsigned long wired;
- unsigned long old_pagemask;
- unsigned long old_ctx;
-
- local_irq_save(flags);
- /* Save old context and create impossible VPN2 value */
- old_ctx = (read_c0_entryhi() & ASID_MASK);
- old_pagemask = read_c0_pagemask();
- wired = read_c0_wired();
- write_c0_wired(wired + 1);
- write_c0_index(wired);
- BARRIER;
- write_c0_pagemask(pagemask);
- write_c0_entryhi(entryhi);
- write_c0_entrylo0(entrylo0);
- write_c0_entrylo1(entrylo1);
- BARRIER;
- tlb_write_indexed();
- BARRIER;
-
- write_c0_entryhi(old_ctx);
- BARRIER;
- write_c0_pagemask(old_pagemask);
- local_flush_tlb_all();
- local_irq_restore(flags);
+ unsigned long flags;
+ unsigned long wired;
+ unsigned long old_pagemask;
+ unsigned long old_ctx;
+
+ local_irq_save(flags);
+ /* Save old context and create impossible VPN2 value */
+ old_ctx = read_c0_entryhi() & ASID_MASK;
+ old_pagemask = read_c0_pagemask();
+ wired = read_c0_wired();
+ write_c0_wired(wired + 1);
+ write_c0_index(wired);
+ BARRIER;
+ write_c0_pagemask(pagemask);
+ write_c0_entryhi(entryhi);
+ write_c0_entrylo0(entrylo0);
+ write_c0_entrylo1(entrylo1);
+ mtc0_tlbw_hazard();
+ tlb_write_indexed();
+ tlbw_use_hazard();
+
+ write_c0_entryhi(old_ctx);
+ BARRIER;
+ write_c0_pagemask(old_pagemask);
+ local_flush_tlb_all();
+ local_irq_restore(flags);
}
/*
@@ -317,17 +273,15 @@ __init int add_temporary_entry(unsigned
}
write_c0_index(temp_tlb_entry);
- BARRIER;
write_c0_pagemask(pagemask);
write_c0_entryhi(entryhi);
write_c0_entrylo0(entrylo0);
write_c0_entrylo1(entrylo1);
- BARRIER;
+ mtc0_tlbw_hazard();
tlb_write_indexed();
- BARRIER;
+ tlbw_use_hazard();
write_c0_entryhi(old_ctx);
- BARRIER;
write_c0_pagemask(old_pagemask);
out:
local_irq_restore(flags);
@@ -348,15 +302,23 @@ static void __init probe_tlb(unsigned lo
return;
config1 = read_c0_config1();
- if (!((config1 >> 7) & 3))
- panic("No MMU present");
+ if (!((config >> 7) & 3))
+ panic("No TLB present");
c->tlbsize = ((config1 >> 25) & 0x3f) + 1;
}
void __init r4k_tlb_init(void)
{
- unsigned long config = read_c0_config();
+ unsigned int config = read_c0_config();
+
+ /*
+ * You should never change this register:
+ * - On R4600 1.7 the tlbp never hits for pages smaller than
+ * the value in the c0_pagemask register.
+ * - The entire mm handling assumes the c0_pagemask register to
+ * be set for 4kb pages.
+ */
probe_tlb(config);
write_c0_pagemask(PM_DEFAULT_MASK);
write_c0_wired(0);
Index: linux-2.4.35.4/drivers/char/au1000_gpio.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/au1000_gpio.c
+++ linux-2.4.35.4/drivers/char/au1000_gpio.c
@@ -246,7 +246,7 @@ static struct file_operations au1000gpio
static struct miscdevice au1000gpio_miscdev =
{
- GPIO_MINOR,
+ MISC_DYNAMIC_MINOR,
"au1000_gpio",
&au1000gpio_fops
};
Index: linux-2.4.35.4/drivers/char/au1550_psc_spi.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/char/au1550_psc_spi.c
@@ -0,0 +1,466 @@
+/*
+ * Driver for Alchemy Au1550 SPI on the PSC.
+ *
+ * Copyright 2004 Embedded Edge, LLC.
+ * dan@embeddededge.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/au1000.h>
+#include <asm/au1550_spi.h>
+#include <asm/au1xxx_psc.h>
+
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/pb1550.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+#include <asm/db1x00.h>
+#endif
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/pb1200.h>
+#endif
+
+/* This is just a simple programmed I/O SPI interface on the PSC of the 1550.
+ * We support open, close, write, and ioctl. The SPI is a full duplex
+ * interface, you can't read without writing. So, the write system call
+ * copies the bytes out to the SPI, and whatever is returned is placed
+ * in the same buffer. Kinda weird, maybe we'll change it, but for now
+ * it works OK.
+ * I didn't implement any DMA yet, and it's a debate about the necessity.
+ * The SPI clocks are usually quite fast, so data is sent/received as
+ * quickly as you can stuff the FIFO. The overhead of DMA and interrupts
+ * are usually far greater than the data transfer itself. If, however,
+ * we find applications that move large amounts of data, we may choose
+ * use the overhead of buffering and DMA to do the work.
+ */
+
+/* The maximum clock rate specified in the manual is 2mHz.
+*/
+#define MAX_BAUD_RATE (2 * 1000000)
+#define PSC_INTCLK_RATE (32 * 1000000)
+
+static int inuse;
+
+/* We have to know what the user requested for the data length
+ * so we know how to stuff the fifo. The FIFO is 32 bits wide,
+ * and we have to load it with the bits to go in a single transfer.
+ */
+static uint spi_datalen;
+
+static int
+au1550spi_master_done( int ms )
+{
+ int timeout=ms;
+ volatile psc_spi_t *sp;
+
+ sp = (volatile psc_spi_t *)SPI_PSC_BASE;
+
+ /* Loop until MD is set or timeout has expired */
+ while(!(sp->psc_spievent & PSC_SPIEVNT_MD) && timeout--) udelay(1000);
+
+ if ( !timeout )
+ return 0;
+ else
+ sp->psc_spievent |= PSC_SPIEVNT_MD;
+
+ return 1;
+}
+
+static int
+au1550spi_open(struct inode *inode, struct file *file)
+{
+ if (inuse)
+ return -EBUSY;
+
+ inuse = 1;
+
+ MOD_INC_USE_COUNT;
+
+ return 0;
+}
+
+static ssize_t
+au1550spi_write(struct file *fp, const char *bp, size_t count, loff_t *ppos)
+{
+ int bytelen, i;
+ size_t rcount, retval;
+ unsigned char sb, *rp, *wp;
+ uint fifoword, pcr, stat;
+ volatile psc_spi_t *sp;
+
+ /* Get the number of bytes per transfer.
+ */
+ bytelen = ((spi_datalen - 1) / 8) + 1;
+
+ /* User needs to send us multiple of this count.
+ */
+ if ((count % bytelen) != 0)
+ return -EINVAL;
+
+ rp = wp = (unsigned char *)bp;
+ retval = rcount = count;
+
+ /* Reset the FIFO.
+ */
+ sp = (volatile psc_spi_t *)SPI_PSC_BASE;
+ sp->psc_spipcr = (PSC_SPIPCR_RC | PSC_SPIPCR_TC);
+ au_sync();
+ do {
+ pcr = sp->psc_spipcr;
+ au_sync();
+ } while (pcr != 0);
+
+ /* Prime the transmit FIFO.
+ */
+ while (count > 0) {
+ fifoword = 0;
+ for (i=0; i<bytelen; i++) {
+ fifoword <<= 8;
+ if (get_user(sb, wp) < 0)
+ return -EFAULT;
+ fifoword |= sb;
+ wp++;
+ }
+ count -= bytelen;
+ if (count <= 0)
+ fifoword |= PSC_SPITXRX_LC;
+ sp->psc_spitxrx = fifoword;
+ au_sync();
+ stat = sp->psc_spistat;
+ au_sync();
+ if (stat & PSC_SPISTAT_TF)
+ break;
+ }
+
+ /* Start the transfer.
+ */
+ sp->psc_spipcr = PSC_SPIPCR_MS;
+ au_sync();
+
+ /* Now, just keep the transmit fifo full and empty the receive.
+ */
+ while (count > 0) {
+ stat = sp->psc_spistat;
+ au_sync();
+ while ((stat & PSC_SPISTAT_RE) == 0) {
+ fifoword = sp->psc_spitxrx;
+ au_sync();
+ for (i=0; i<bytelen; i++) {
+ sb = fifoword & 0xff;
+ if (put_user(sb, rp) < 0)
+ return -EFAULT;
+ fifoword >>= 8;
+ rp++;
+ }
+ rcount -= bytelen;
+ stat = sp->psc_spistat;
+ au_sync();
+ }
+ if ((stat & PSC_SPISTAT_TF) == 0) {
+ fifoword = 0;
+ for (i=0; i<bytelen; i++) {
+ fifoword <<= 8;
+ if (get_user(sb, wp) < 0)
+ return -EFAULT;
+ fifoword |= sb;
+ wp++;
+ }
+ count -= bytelen;
+ if (count <= 0)
+ fifoword |= PSC_SPITXRX_LC;
+ sp->psc_spitxrx = fifoword;
+ au_sync();
+ }
+ }
+
+ /* All of the bytes for transmit have been written. Hang
+ * out waiting for any residual bytes that are yet to be
+ * read from the fifo.
+ */
+ while (rcount > 0) {
+ stat = sp->psc_spistat;
+ au_sync();
+ if ((stat & PSC_SPISTAT_RE) == 0) {
+ fifoword = sp->psc_spitxrx;
+ au_sync();
+ for (i=0; i<bytelen; i++) {
+ sb = fifoword & 0xff;
+ if (put_user(sb, rp) < 0)
+ return -EFAULT;
+ fifoword >>= 8;
+ rp++;
+ }
+ rcount -= bytelen;
+ }
+ }
+
+ /* Wait for MasterDone event. 30ms timeout */
+ if (!au1550spi_master_done(30) ) retval = -EFAULT;
+ return retval;
+}
+
+static int
+au1550spi_release(struct inode *inode, struct file *file)
+{
+ MOD_DEC_USE_COUNT;
+
+ inuse = 0;
+
+ return 0;
+}
+
+/* Set the baud rate closest to the request, then return the actual
+ * value we are using.
+ */
+static uint
+set_baud_rate(uint baud)
+{
+ uint rate, tmpclk, brg, ctl, stat;
+ volatile psc_spi_t *sp;
+
+ /* For starters, the input clock is divided by two.
+ */
+ tmpclk = PSC_INTCLK_RATE/2;
+
+ rate = tmpclk / baud;
+
+ /* The dividers work as follows:
+ * baud = tmpclk / (2 * (brg + 1))
+ */
+ brg = (rate/2) - 1;
+
+ /* Test BRG to ensure it will fit into the 6 bits allocated.
+ */
+
+ /* Make sure the device is disabled while we make the change.
+ */
+ sp = (volatile psc_spi_t *)SPI_PSC_BASE;
+ ctl = sp->psc_spicfg;
+ au_sync();
+ sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE;
+ au_sync();
+ ctl = PSC_SPICFG_CLR_BAUD(ctl);
+ ctl |= PSC_SPICFG_SET_BAUD(brg);
+ sp->psc_spicfg = ctl;
+ au_sync();
+
+ /* If the device was running prior to getting here, wait for
+ * it to restart.
+ */
+ if (ctl & PSC_SPICFG_DE_ENABLE) {
+ do {
+ stat = sp->psc_spistat;
+ au_sync();
+ } while ((stat & PSC_SPISTAT_DR) == 0);
+ }
+
+ /* Return the actual value.
+ */
+ rate = tmpclk / (2 * (brg + 1));
+
+ return(rate);
+}
+
+static uint
+set_word_len(uint len)
+{
+ uint ctl, stat;
+ volatile psc_spi_t *sp;
+
+ if ((len < 4) || (len > 24))
+ return -EINVAL;
+
+ /* Make sure the device is disabled while we make the change.
+ */
+ sp = (volatile psc_spi_t *)SPI_PSC_BASE;
+ ctl = sp->psc_spicfg;
+ au_sync();
+ sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE;
+ au_sync();
+ ctl = PSC_SPICFG_CLR_LEN(ctl);
+ ctl |= PSC_SPICFG_SET_LEN(len);
+ sp->psc_spicfg = ctl;
+ au_sync();
+
+ /* If the device was running prior to getting here, wait for
+ * it to restart.
+ */
+ if (ctl & PSC_SPICFG_DE_ENABLE) {
+ do {
+ stat = sp->psc_spistat;
+ au_sync();
+ } while ((stat & PSC_SPISTAT_DR) == 0);
+ }
+
+ return 0;
+}
+
+static int
+au1550spi_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int status;
+ u32 val;
+
+ status = 0;
+
+ switch(cmd) {
+ case AU1550SPI_WORD_LEN:
+ status = set_word_len(arg);
+ break;
+
+ case AU1550SPI_SET_BAUD:
+ if (get_user(val, (u32 *)arg))
+ return -EFAULT;
+
+ val = set_baud_rate(val);
+ if (put_user(val, (u32 *)arg))
+ return -EFAULT;
+ break;
+
+ default:
+ status = -ENOIOCTLCMD;
+
+ }
+
+ return status;
+}
+
+
+static struct file_operations au1550spi_fops =
+{
+ owner: THIS_MODULE,
+ write: au1550spi_write,
+ ioctl: au1550spi_ioctl,
+ open: au1550spi_open,
+ release: au1550spi_release,
+};
+
+
+static struct miscdevice au1550spi_miscdev =
+{
+ MISC_DYNAMIC_MINOR,
+ "au1550_spi",
+ &au1550spi_fops
+};
+
+
+int __init
+au1550spi_init(void)
+{
+ uint clk, rate, stat;
+ volatile psc_spi_t *sp;
+
+ /* Wire up Freq3 as a clock for the SPI. The PSC does
+ * factor of 2 divisor, so run a higher rate so we can
+ * get some granularity to the clock speeds.
+ * We can't do this in board set up because the frequency
+ * is computed too late.
+ */
+ rate = get_au1x00_speed();
+ rate /= PSC_INTCLK_RATE;
+
+ /* The FRDIV in the frequency control is (FRDIV + 1) * 2
+ */
+ rate /=2;
+ rate--;
+ clk = au_readl(SYS_FREQCTRL1);
+ au_sync();
+ clk &= ~SYS_FC_FRDIV3_MASK;
+ clk |= (rate << SYS_FC_FRDIV3_BIT);
+ clk |= SYS_FC_FE3;
+ au_writel(clk, SYS_FREQCTRL1);
+ au_sync();
+
+ /* Set up the clock source routing to get Freq3 to PSC0_intclk.
+ */
+ clk = au_readl(SYS_CLKSRC);
+ au_sync();
+ clk &= ~0x03e0;
+ clk |= (5 << 7);
+ au_writel(clk, SYS_CLKSRC);
+ au_sync();
+
+ /* Set up GPIO pin function to drive PSC0_SYNC1, which is
+ * the SPI Select.
+ */
+ clk = au_readl(SYS_PINFUNC);
+ au_sync();
+ clk |= 1;
+ au_writel(clk, SYS_PINFUNC);
+ au_sync();
+
+ /* Now, set up the PSC for SPI PIO mode.
+ */
+ sp = (volatile psc_spi_t *)SPI_PSC_BASE;
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+ sp->psc_sel = PSC_SEL_PS_SPIMODE;
+ sp->psc_spicfg = 0;
+ au_sync();
+ sp->psc_ctrl = PSC_CTRL_ENABLE;
+ au_sync();
+ do {
+ stat = sp->psc_spistat;
+ au_sync();
+ } while ((stat & PSC_SPISTAT_SR) == 0);
+
+ sp->psc_spicfg = (PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8 |
+ PSC_SPICFG_DD_DISABLE | PSC_SPICFG_MO);
+ sp->psc_spicfg |= PSC_SPICFG_SET_LEN(8);
+ spi_datalen = 8;
+ sp->psc_spimsk = PSC_SPIMSK_ALLMASK;
+ au_sync();
+
+ set_baud_rate(1000000);
+
+ sp->psc_spicfg |= PSC_SPICFG_DE_ENABLE;
+ do {
+ stat = sp->psc_spistat;
+ au_sync();
+ } while ((stat & PSC_SPISTAT_DR) == 0);
+
+ misc_register(&au1550spi_miscdev);
+ printk("Au1550 SPI driver\n");
+ return 0;
+}
+
+
+void __exit
+au1550spi_exit(void)
+{
+ misc_deregister(&au1550spi_miscdev);
+}
+
+
+module_init(au1550spi_init);
+module_exit(au1550spi_exit);
Index: linux-2.4.35.4/drivers/char/Config.in
===================================================================
--- linux-2.4.35.4.orig/drivers/char/Config.in
+++ linux-2.4.35.4/drivers/char/Config.in
@@ -314,14 +314,11 @@ fi
if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then
bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8
fi
-if [ "$CONFIG_MIPS" = "y" -a "$CONFIG_NEW_TIME_C" = "y" ]; then
- tristate 'Generic MIPS RTC Support' CONFIG_MIPS_RTC
-fi
if [ "$CONFIG_SGI_IP22" = "y" ]; then
- bool 'SGI DS1286 RTC support' CONFIG_SGI_DS1286
+ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286
fi
if [ "$CONFIG_SGI_IP27" = "y" ]; then
- bool 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
+ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC
fi
if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then
tristate 'Dallas DS1742 RTC support' CONFIG_DS1742
@@ -384,6 +381,11 @@ if [ "$CONFIG_DRM" = "y" ]; then
source drivers/char/drm/Config.in
fi
fi
+
+if [ "$CONFIG_X86" = "y" ]; then
+ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE
+fi
+
endmenu
if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then
@@ -392,6 +394,7 @@ fi
if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO
tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846
+ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI
fi
if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then
tristate ' ITE GPIO' CONFIG_ITE_GPIO
Index: linux-2.4.35.4/drivers/char/decserial.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/decserial.c
+++ linux-2.4.35.4/drivers/char/decserial.c
@@ -3,95 +3,105 @@
* choose the right serial device at boot time
*
* triemer 6-SEP-1998
- * sercons.c is designed to allow the three different kinds
+ * sercons.c is designed to allow the three different kinds
* of serial devices under the decstation world to co-exist
- * in the same kernel. The idea here is to abstract
+ * in the same kernel. The idea here is to abstract
* the pieces of the drivers that are common to this file
* so that they do not clash at compile time and runtime.
*
* HK 16-SEP-1998 v0.002
* removed the PROM console as this is not a real serial
* device. Added support for PROM console in drivers/char/tty_io.c
- * instead. Although it may work to enable more than one
+ * instead. Although it may work to enable more than one
* console device I strongly recommend to use only one.
+ *
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#include <linux/config.h>
+#include <linux/errno.h>
#include <linux/init.h>
+
#include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
+
+extern int register_zs_hook(unsigned int channel,
+ struct dec_serial_hook *hook);
+extern int unregister_zs_hook(unsigned int channel);
+
+extern int register_dz_hook(unsigned int channel,
+ struct dec_serial_hook *hook);
+extern int unregister_dz_hook(unsigned int channel);
+int register_dec_serial_hook(unsigned int channel,
+ struct dec_serial_hook *hook)
+{
#ifdef CONFIG_ZS
-extern int zs_init(void);
+ if (IOASIC)
+ return register_zs_hook(channel, hook);
#endif
-
#ifdef CONFIG_DZ
-extern int dz_init(void);
+ if (!IOASIC)
+ return register_dz_hook(channel, hook);
#endif
+ return 0;
+}
-#ifdef CONFIG_SERIAL_DEC_CONSOLE
-
+int unregister_dec_serial_hook(unsigned int channel)
+{
#ifdef CONFIG_ZS
-extern void zs_serial_console_init(void);
+ if (IOASIC)
+ return unregister_zs_hook(channel);
#endif
-
#ifdef CONFIG_DZ
-extern void dz_serial_console_init(void);
-#endif
-
+ if (!IOASIC)
+ return unregister_dz_hook(channel);
#endif
+ return 0;
+}
-/* rs_init - starts up the serial interface -
- handle normal case of starting up the serial interface */
-#ifdef CONFIG_SERIAL_DEC
+extern int zs_init(void);
+extern int dz_init(void);
+/*
+ * rs_init - starts up the serial interface -
+ * handle normal case of starting up the serial interface
+ */
int __init rs_init(void)
{
-
-#if defined(CONFIG_ZS) && defined(CONFIG_DZ)
- if (IOASIC)
- return zs_init();
- else
- return dz_init();
-#else
-
#ifdef CONFIG_ZS
- return zs_init();
+ if (IOASIC)
+ return zs_init();
#endif
-
#ifdef CONFIG_DZ
- return dz_init();
-#endif
-
+ if (!IOASIC)
+ return dz_init();
#endif
+ return -ENXIO;
}
__initcall(rs_init);
-#endif
#ifdef CONFIG_SERIAL_DEC_CONSOLE
-/* dec_serial_console_init handles the special case of starting
- * up the console on the serial port
+extern void zs_serial_console_init(void);
+extern void dz_serial_console_init(void);
+
+/*
+ * dec_serial_console_init handles the special case of starting
+ * up the console on the serial port
*/
void __init dec_serial_console_init(void)
{
-#if defined(CONFIG_ZS) && defined(CONFIG_DZ)
- if (IOASIC)
- zs_serial_console_init();
- else
- dz_serial_console_init();
-#else
-
#ifdef CONFIG_ZS
- zs_serial_console_init();
+ if (IOASIC)
+ zs_serial_console_init();
#endif
-
#ifdef CONFIG_DZ
- dz_serial_console_init();
-#endif
-
+ if (!IOASIC)
+ dz_serial_console_init();
#endif
}
Index: linux-2.4.35.4/drivers/char/ds1286.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/ds1286.c
+++ linux-2.4.35.4/drivers/char/ds1286.c
@@ -1,6 +1,10 @@
/*
* DS1286 Real Time Clock interface for Linux
*
+ * Copyright (C) 2003 TimeSys Corp.
+ * S. James Hill (James.Hill@timesys.com)
+ * (sjhill@realitydiluted.com)
+ *
* Copyright (C) 1998, 1999, 2000 Ralf Baechle
*
* Based on code written by Paul Gortmaker.
@@ -29,6 +33,7 @@
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
@@ -95,6 +100,12 @@ static ssize_t ds1286_read(struct file *
return -EIO;
}
+void rtc_ds1286_wait(void)
+{
+ unsigned char sec = CMOS_READ(RTC_SECONDS);
+ while (sec == CMOS_READ(RTC_SECONDS));
+}
+
static int ds1286_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -249,23 +260,22 @@ static int ds1286_open(struct inode *ino
{
spin_lock_irq(&ds1286_lock);
- if (ds1286_status & RTC_IS_OPEN)
- goto out_busy;
+ if (ds1286_status & RTC_IS_OPEN) {
+ spin_unlock_irq(&ds1286_lock);
+ return -EBUSY;
+ }
ds1286_status |= RTC_IS_OPEN;
- spin_lock_irq(&ds1286_lock);
+ spin_unlock_irq(&ds1286_lock);
return 0;
-
-out_busy:
- spin_lock_irq(&ds1286_lock);
- return -EBUSY;
}
static int ds1286_release(struct inode *inode, struct file *file)
{
+ spin_lock_irq(&ds1286_lock);
ds1286_status &= ~RTC_IS_OPEN;
-
+ spin_unlock_irq(&ds1286_lock);
return 0;
}
@@ -276,32 +286,6 @@ static unsigned int ds1286_poll(struct f
return 0;
}
-/*
- * The various file operations we support.
- */
-
-static struct file_operations ds1286_fops = {
- .llseek = no_llseek,
- .read = ds1286_read,
- .poll = ds1286_poll,
- .ioctl = ds1286_ioctl,
- .open = ds1286_open,
- .release = ds1286_release,
-};
-
-static struct miscdevice ds1286_dev=
-{
- .minor = RTC_MINOR,
- .name = "rtc",
- .fops = &ds1286_fops,
-};
-
-int __init ds1286_init(void)
-{
- printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
- return misc_register(&ds1286_dev);
-}
-
static char *days[] = {
"***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
};
@@ -528,3 +512,38 @@ void ds1286_get_alm_time(struct rtc_time
BCD_TO_BIN(alm_tm->tm_hour);
alm_tm->tm_sec = 0;
}
+
+static struct file_operations ds1286_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .read = ds1286_read,
+ .poll = ds1286_poll,
+ .ioctl = ds1286_ioctl,
+ .open = ds1286_open,
+ .release = ds1286_release,
+};
+
+static struct miscdevice ds1286_dev =
+{
+ .minor = RTC_MINOR,
+ .name = "rtc",
+ .fops = &ds1286_fops,
+};
+
+static int __init ds1286_init(void)
+{
+ printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
+ return misc_register(&ds1286_dev);
+}
+
+static void __exit ds1286_exit(void)
+{
+ misc_deregister(&ds1286_dev);
+}
+
+module_init(ds1286_init);
+module_exit(ds1286_exit);
+EXPORT_NO_SYMBOLS;
+
+MODULE_AUTHOR("Ralf Baechle");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/char/ds1742.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/ds1742.c
+++ linux-2.4.35.4/drivers/char/ds1742.c
@@ -142,6 +142,7 @@ static int rtc_ds1742_set_time(unsigned
CMOS_WRITE(RTC_WRITE, RTC_CONTROL);
/* convert */
+ memset(&tm, 0, sizeof(struct rtc_time));
to_tm(t, &tm);
/* check each field one by one */
@@ -216,6 +217,7 @@ static int get_ds1742_status(char *buf)
unsigned long curr_time;
curr_time = rtc_ds1742_get_time();
+ memset(&tm, 0, sizeof(struct rtc_time));
to_tm(curr_time, &tm);
p = buf;
@@ -251,8 +253,8 @@ static int ds1742_read_proc(char *page,
void rtc_ds1742_wait(void)
{
- while (CMOS_READ(RTC_SECONDS) & 1);
- while (!(CMOS_READ(RTC_SECONDS) & 1));
+ unsigned char sec = CMOS_READ(RTC_SECONDS);
+ while (sec == CMOS_READ(RTC_SECONDS));
}
static int ds1742_ioctl(struct inode *inode, struct file *file,
@@ -264,6 +266,7 @@ static int ds1742_ioctl(struct inode *in
switch (cmd) {
case RTC_RD_TIME: /* Read the time/date from RTC */
curr_time = rtc_ds1742_get_time();
+ memset(&rtc_tm, 0, sizeof(struct rtc_time));
to_tm(curr_time, &rtc_tm);
rtc_tm.tm_year -= 1900;
return copy_to_user((void *) arg, &rtc_tm, sizeof(rtc_tm)) ?
Index: linux-2.4.35.4/drivers/char/dummy_keyb.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/dummy_keyb.c
+++ linux-2.4.35.4/drivers/char/dummy_keyb.c
@@ -141,3 +141,7 @@ void __init kbd_init_hw(void)
{
printk("Dummy keyboard driver installed.\n");
}
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned char kbd_sysrq_key;
+unsigned char kbd_sysrq_xlate[128];
+#endif
Index: linux-2.4.35.4/drivers/char/dz.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/dz.c
+++ linux-2.4.35.4/drivers/char/dz.c
@@ -1,11 +1,13 @@
/*
- * dz.c: Serial port driver for DECStations equiped
+ * dz.c: Serial port driver for DECstations equipped
* with the DZ chipset.
*
* Copyright (C) 1998 Olivier A. D. Lebaillif
*
* Email: olivier.lebaillif@ifrsys.com
*
+ * Copyright (C) 2004 Maciej W. Rozycki
+ *
* [31-AUG-98] triemer
* Changed IRQ to use Harald's dec internals interrupts.h
* removed base_addr code - moving address assignment to setup.c
@@ -24,6 +26,7 @@
#undef DEBUG_DZ
#include <linux/config.h>
+#include <linux/delay.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -54,33 +57,56 @@
#include <asm/system.h>
#include <asm/uaccess.h>
-#define CONSOLE_LINE (3) /* for definition of struct console */
+#ifdef CONFIG_MAGIC_SYSRQ
+#include <linux/sysrq.h>
+#endif
#include "dz.h"
-#define DZ_INTR_DEBUG 1
-
DECLARE_TASK_QUEUE(tq_serial);
-static struct dz_serial *lines[4];
-static unsigned char tmp_buffer[256];
+static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */
+static struct tty_driver serial_driver, callout_driver;
+
+static struct tty_struct *serial_table[DZ_NB_PORT];
+static struct termios *serial_termios[DZ_NB_PORT];
+static struct termios *serial_termios_locked[DZ_NB_PORT];
+
+static int serial_refcount;
-#ifdef DEBUG_DZ
/*
- * debugging code to send out chars via prom
+ * tmp_buf is used as a temporary buffer by serial_write. We need to
+ * lock it in case the copy_from_user blocks while swapping in a page,
+ * and some other program tries to do a serial write at the same time.
+ * Since the lock will only come under contention when the system is
+ * swapping and available memory is low, it makes sense to share one
+ * buffer across all the serial ports, since it significantly saves
+ * memory if large numbers of serial ports are open.
*/
-static void debug_console(const char *s, int count)
-{
- unsigned i;
+static unsigned char *tmp_buf;
+static DECLARE_MUTEX(tmp_buf_sem);
- for (i = 0; i < count; i++) {
- if (*s == 10)
- prom_printf("%c", 13);
- prom_printf("%c", *s++);
- }
-}
+static char *dz_name __initdata = "DECstation DZ serial driver version ";
+static char *dz_version __initdata = "1.03";
+
+static struct dz_serial *lines[DZ_NB_PORT];
+static unsigned char tmp_buffer[256];
+
+#ifdef CONFIG_SERIAL_DEC_CONSOLE
+static struct console dz_sercons;
+#endif
+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
+ !defined(MODULE)
+static unsigned long break_pressed; /* break, really ... */
#endif
+static void change_speed (struct dz_serial *);
+
+static int baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 0
+};
+
/*
* ------------------------------------------------------------
* dz_in () and dz_out ()
@@ -94,15 +120,16 @@ static inline unsigned short dz_in(struc
{
volatile unsigned short *addr =
(volatile unsigned short *) (info->port + offset);
+
return *addr;
}
static inline void dz_out(struct dz_serial *info, unsigned offset,
unsigned short value)
{
-
volatile unsigned short *addr =
(volatile unsigned short *) (info->port + offset);
+
*addr = value;
}
@@ -143,25 +170,24 @@ static void dz_start(struct tty_struct *
tmp |= mask; /* set the TX flag */
dz_out(info, DZ_TCR, tmp);
-
}
/*
* ------------------------------------------------------------
- * Here starts the interrupt handling routines. All of the
- * following subroutines are declared as inline and are folded
- * into dz_interrupt. They were separated out for readability's
- * sake.
*
- * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * Here starts the interrupt handling routines. All of the following
+ * subroutines are declared as inline and are folded into
+ * dz_interrupt(). They were separated out for readability's sake.
+ *
+ * Note: dz_interrupt() is a "fast" interrupt, which means that it
* runs with interrupts turned off. People who may want to modify
- * rs_interrupt() should try to keep the interrupt handler as fast as
+ * dz_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
*
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer dz.c
*
- * and look at the resulting assemble code in serial.s.
+ * and look at the resulting assemble code in dz.s.
*
* ------------------------------------------------------------
*/
@@ -188,101 +214,97 @@ static inline void dz_sched_event(struct
* This routine deals with inputs from any lines.
* ------------------------------------------------------------
*/
-static inline void receive_chars(struct dz_serial *info_in)
+static inline void receive_chars(struct dz_serial *info_in,
+ struct pt_regs *regs)
{
-
struct dz_serial *info;
- struct tty_struct *tty = 0;
+ struct tty_struct *tty;
struct async_icount *icount;
- int ignore = 0;
- unsigned short status, tmp;
- unsigned char ch;
-
- /* this code is going to be a problem...
- the call to tty_flip_buffer is going to need
- to be rethought...
- */
- do {
- status = dz_in(info_in, DZ_RBUF);
- info = lines[LINE(status)];
+ int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
+ unsigned short status;
+ unsigned char ch, flag;
+ int i;
- /* punt so we don't get duplicate characters */
- if (!(status & DZ_DVAL))
- goto ignore_char;
-
- ch = UCHAR(status); /* grab the char */
-
-#if 0
- if (info->is_console) {
- if (ch == 0)
- return; /* it's a break ... */
- }
-#endif
+ while ((status = dz_in(info_in, DZ_RBUF)) & DZ_DVAL) {
+ info = lines[LINE(status)];
+ tty = info->tty; /* point to the proper dev */
- tty = info->tty; /* now tty points to the proper dev */
- icount = &info->icount;
+ ch = UCHAR(status); /* grab the char */
- if (!tty)
- break;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
+ if (!tty && (!info->hook || !info->hook->rx_char))
+ continue;
- *tty->flip.char_buf_ptr = ch;
- *tty->flip.flag_buf_ptr = 0;
+ icount = &info->icount;
icount->rx++;
- /* keep track of the statistics */
- if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) {
- if (status & DZ_PERR) /* parity error */
- icount->parity++;
- else if (status & DZ_FERR) /* frame error */
- icount->frame++;
- if (status & DZ_OERR) /* overrun error */
- icount->overrun++;
-
- /* check to see if we should ignore the character
- and mask off conditions that should be ignored
+ flag = 0;
+ if (status & DZ_FERR) { /* frame error */
+ /*
+ * There is no separate BREAK status bit, so
+ * treat framing errors as BREAKs for Magic SysRq
+ * and SAK; normally, otherwise.
*/
-
- if (status & info->ignore_status_mask) {
- if (++ignore > 100)
- break;
- goto ignore_char;
+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
+ !defined(MODULE)
+ if (info->line == dz_sercons.index) {
+ if (!break_pressed)
+ break_pressed = jiffies;
+ continue;
}
- /* mask off the error conditions we want to ignore */
- tmp = status & info->read_status_mask;
-
- if (tmp & DZ_PERR) {
- *tty->flip.flag_buf_ptr = TTY_PARITY;
-#ifdef DEBUG_DZ
- debug_console("PERR\n", 5);
-#endif
- } else if (tmp & DZ_FERR) {
- *tty->flip.flag_buf_ptr = TTY_FRAME;
-#ifdef DEBUG_DZ
- debug_console("FERR\n", 5);
#endif
+ flag = TTY_BREAK;
+ if (info->flags & DZ_SAK)
+ do_SAK(tty);
+ else
+ flag = TTY_FRAME;
+ } else if (status & DZ_OERR) /* overrun error */
+ flag = TTY_OVERRUN;
+ else if (status & DZ_PERR) /* parity error */
+ flag = TTY_PARITY;
+
+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
+ !defined(MODULE)
+ if (break_pressed && info->line == dz_sercons.index) {
+ if (time_before(jiffies, break_pressed + HZ * 5)) {
+ handle_sysrq(ch, regs, NULL, NULL);
+ break_pressed = 0;
+ continue;
}
- if (tmp & DZ_OERR) {
-#ifdef DEBUG_DZ
- debug_console("OERR\n", 5);
+ break_pressed = 0;
+ }
#endif
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
- }
+
+ if (info->hook && info->hook->rx_char) {
+ (*info->hook->rx_char)(ch, flag);
+ return;
}
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- ignore_char:
- } while (status & DZ_DVAL);
- if (tty)
- tty_flip_buffer_push(tty);
+ /* keep track of the statistics */
+ switch (flag) {
+ case TTY_FRAME:
+ icount->frame++;
+ break;
+ case TTY_PARITY:
+ icount->parity++;
+ break;
+ case TTY_OVERRUN:
+ icount->overrun++;
+ break;
+ case TTY_BREAK:
+ icount->brk++;
+ break;
+ default:
+ break;
+ }
+
+ if ((status & info->ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ lines_rx[LINE(status)] = 1;
+ }
+ }
+ for (i = 0; i < DZ_NB_PORT; i++)
+ if (lines_rx[i])
+ tty_flip_buffer_push(lines[i]->tty);
}
/*
@@ -292,20 +314,34 @@ static inline void receive_chars(struct
* This routine deals with outputs to any lines.
* ------------------------------------------------------------
*/
-static inline void transmit_chars(struct dz_serial *info)
+static inline void transmit_chars(struct dz_serial *info_in)
{
+ struct dz_serial *info;
+ unsigned short status;
unsigned char tmp;
+ status = dz_in(info_in, DZ_CSR);
+ info = lines[LINE(status)];
+ if (info->hook || !info->tty) {
+ unsigned short mask, tmp;
- if (info->x_char) { /* XON/XOFF chars */
+ mask = 1 << info->line;
+ tmp = dz_in(info, DZ_TCR); /* read the TX flag */
+ tmp &= ~mask; /* clear the TX flag */
+ dz_out(info, DZ_TCR, tmp);
+ return;
+ }
+
+ if (info->x_char) { /* XON/XOFF chars */
dz_out(info, DZ_TDR, info->x_char);
info->icount.tx++;
info->x_char = 0;
return;
}
/* if nothing to do or stopped or hardware stopped */
- if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tty->hw_stopped) {
+ if (info->xmit_cnt <= 0 ||
+ info->tty->stopped || info->tty->hw_stopped) {
dz_stop(info->tty);
return;
}
@@ -359,15 +395,14 @@ static inline void check_modem_status(st
*/
static void dz_interrupt(int irq, void *dev, struct pt_regs *regs)
{
- struct dz_serial *info;
+ struct dz_serial *info = (struct dz_serial *)dev;
unsigned short status;
/* get the reason why we just got an irq */
- status = dz_in((struct dz_serial *) dev, DZ_CSR);
- info = lines[LINE(status)]; /* re-arrange info the proper port */
+ status = dz_in(info, DZ_CSR);
if (status & DZ_RDONE)
- receive_chars(info); /* the receive function */
+ receive_chars(info, regs);
if (status & DZ_TRDY)
transmit_chars(info);
@@ -514,7 +549,7 @@ static void shutdown(struct dz_serial *i
info->cflags &= ~DZ_CREAD; /* turn off receive enable flag */
- dz_out(info, DZ_LPR, info->cflags);
+ dz_out(info, DZ_LPR, info->cflags | info->line);
if (info->xmit_buf) { /* free Tx buffer */
free_page((unsigned long) info->xmit_buf);
@@ -545,18 +580,21 @@ static void change_speed(struct dz_seria
{
unsigned long flags;
unsigned cflag;
- int baud;
+ int baud, i;
- if (!info->tty || !info->tty->termios)
- return;
+ if (!info->hook) {
+ if (!info->tty || !info->tty->termios)
+ return;
+ cflag = info->tty->termios->c_cflag;
+ } else {
+ cflag = info->hook->cflags;
+ }
save_flags(flags);
cli();
info->cflags = info->line;
- cflag = info->tty->termios->c_cflag;
-
switch (cflag & CSIZE) {
case CS5:
info->cflags |= DZ_CS5;
@@ -579,7 +617,16 @@ static void change_speed(struct dz_seria
if (cflag & PARODD)
info->cflags |= DZ_PARODD;
- baud = tty_get_baud_rate(info->tty);
+ i = cflag & CBAUD;
+ if (i & CBAUDEX) {
+ i &= ~CBAUDEX;
+ if (!info->hook)
+ info->tty->termios->c_cflag &= ~CBAUDEX;
+ else
+ info->hook->cflags &= ~CBAUDEX;
+ }
+ baud = baud_table[i];
+
switch (baud) {
case 50:
info->cflags |= DZ_B50;
@@ -629,16 +676,16 @@ static void change_speed(struct dz_seria
}
info->cflags |= DZ_RXENAB;
- dz_out(info, DZ_LPR, info->cflags);
+ dz_out(info, DZ_LPR, info->cflags | info->line);
/* setup accept flag */
info->read_status_mask = DZ_OERR;
- if (I_INPCK(info->tty))
+ if (info->tty && I_INPCK(info->tty))
info->read_status_mask |= (DZ_FERR | DZ_PERR);
/* characters to ignore */
info->ignore_status_mask = 0;
- if (I_IGNPAR(info->tty))
+ if (info->tty && I_IGNPAR(info->tty))
info->ignore_status_mask |= (DZ_FERR | DZ_PERR);
restore_flags(flags);
@@ -694,7 +741,7 @@ static int dz_write(struct tty_struct *t
down(&tmp_buf_sem);
while (1) {
- c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
+ c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
@@ -707,7 +754,7 @@ static int dz_write(struct tty_struct *t
save_flags(flags);
cli();
- c = MIN(c, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
+ c = min(c, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
info->xmit_head = ((info->xmit_head + c) & (DZ_XMIT_SIZE - 1));
info->xmit_cnt += c;
@@ -727,7 +774,7 @@ static int dz_write(struct tty_struct *t
save_flags(flags);
cli();
- c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
+ c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head));
if (c <= 0) {
restore_flags(flags);
break;
@@ -845,7 +892,7 @@ static void dz_send_xchar(struct tty_str
/*
* ------------------------------------------------------------
- * rs_ioctl () and friends
+ * dz_ioctl () and friends
* ------------------------------------------------------------
*/
static int get_serial_info(struct dz_serial *info,
@@ -958,6 +1005,9 @@ static int dz_ioctl(struct tty_struct *t
struct dz_serial *info = (struct dz_serial *) tty->driver_data;
int retval;
+ if (info->hook)
+ return -ENODEV;
+
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
(cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
@@ -1252,19 +1302,14 @@ static int dz_open(struct tty_struct *tt
int retval, line;
line = MINOR(tty->device) - tty->driver.minor_start;
-
- /* The dz lines for the mouse/keyboard must be
- * opened using their respective drivers.
- */
if ((line < 0) || (line >= DZ_NB_PORT))
return -ENODEV;
+ info = lines[line];
- if ((line == DZ_KEYBOARD) || (line == DZ_MOUSE))
+ if (info->hook)
return -ENODEV;
- info = lines[line];
info->count++;
-
tty->driver_data = info;
info->tty = tty;
@@ -1285,14 +1330,21 @@ static int dz_open(struct tty_struct *tt
else
*tty->termios = info->callout_termios;
change_speed(info);
-
}
+#ifdef CONFIG_SERIAL_DEC_CONSOLE
+ if (dz_sercons.cflag && dz_sercons.index == line) {
+ tty->termios->c_cflag = dz_sercons.cflag;
+ dz_sercons.cflag = 0;
+ change_speed(info);
+ }
+#endif
+
info->session = current->session;
info->pgrp = current->pgrp;
return 0;
}
-static void show_serial_version(void)
+static void __init show_serial_version(void)
{
printk("%s%s\n", dz_name, dz_version);
}
@@ -1300,7 +1352,6 @@ static void show_serial_version(void)
int __init dz_init(void)
{
int i;
- long flags;
struct dz_serial *info;
/* Setup base handler, and timer table. */
@@ -1311,9 +1362,9 @@ int __init dz_init(void)
memset(&serial_driver, 0, sizeof(struct tty_driver));
serial_driver.magic = TTY_DRIVER_MAGIC;
#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
- serial_driver.name = "ttyS";
-#else
serial_driver.name = "tts/%d";
+#else
+ serial_driver.name = "ttyS";
#endif
serial_driver.major = TTY_MAJOR;
serial_driver.minor_start = 64;
@@ -1352,9 +1403,9 @@ int __init dz_init(void)
*/
callout_driver = serial_driver;
#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS))
- callout_driver.name = "cua";
-#else
callout_driver.name = "cua/%d";
+#else
+ callout_driver.name = "cua";
#endif
callout_driver.major = TTYAUX_MAJOR;
callout_driver.subtype = SERIAL_TYPE_CALLOUT;
@@ -1363,25 +1414,27 @@ int __init dz_init(void)
panic("Couldn't register serial driver");
if (tty_register_driver(&callout_driver))
panic("Couldn't register callout driver");
- save_flags(flags);
- cli();
for (i = 0; i < DZ_NB_PORT; i++) {
info = &multi[i];
lines[i] = info;
- info->magic = SERIAL_MAGIC;
-
+ info->tty = 0;
+ info->x_char = 0;
if (mips_machtype == MACH_DS23100 ||
mips_machtype == MACH_DS5100)
info->port = (unsigned long) KN01_DZ11_BASE;
else
info->port = (unsigned long) KN02_DZ11_BASE;
-
info->line = i;
- info->tty = 0;
+
+ if (info->hook && info->hook->init_info) {
+ (*info->hook->init_info)(info);
+ continue;
+ }
+
+ info->magic = SERIAL_MAGIC;
info->close_delay = 50;
info->closing_wait = 3000;
- info->x_char = 0;
info->event = 0;
info->count = 0;
info->blocked_open = 0;
@@ -1393,25 +1446,16 @@ int __init dz_init(void)
info->normal_termios = serial_driver.init_termios;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
-
- /*
- * If we are pointing to address zero then punt - not correctly
- * set up in setup.c to handle this.
- */
- if (!info->port)
- return 0;
-
- printk("ttyS%02d at 0x%08x (irq = %d)\n", info->line,
- info->port, dec_interrupt[DEC_IRQ_DZ11]);
-
+ printk("ttyS%02d at 0x%08x (irq = %d) is a DC7085 DZ\n",
+ info->line, info->port, dec_interrupt[DEC_IRQ_DZ11]);
tty_register_devfs(&serial_driver, 0,
- serial_driver.minor_start + info->line);
+ serial_driver.minor_start + info->line);
tty_register_devfs(&callout_driver, 0,
- callout_driver.minor_start + info->line);
+ callout_driver.minor_start + info->line);
}
- /* reset the chip */
#ifndef CONFIG_SERIAL_DEC_CONSOLE
+ /* reset the chip */
dz_out(info, DZ_CSR, DZ_CLR);
while (dz_in(info, DZ_CSR) & DZ_CLR);
iob();
@@ -1420,43 +1464,104 @@ int __init dz_init(void)
dz_out(info, DZ_CSR, DZ_MSE);
#endif
- /* order matters here... the trick is that flags
- is updated... in request_irq - to immediatedly obliterate
- it is unwise. */
- restore_flags(flags);
-
-
if (request_irq(dec_interrupt[DEC_IRQ_DZ11], dz_interrupt,
- SA_INTERRUPT, "DZ", lines[0]))
+ 0, "DZ", lines[0]))
panic("Unable to register DZ interrupt");
+ for (i = 0; i < DZ_NB_PORT; i++)
+ if (lines[i]->hook) {
+ startup(lines[i]);
+ if (lines[i]->hook->init_channel)
+ (*lines[i]->hook->init_channel)(lines[i]);
+ }
+
return 0;
}
-#ifdef CONFIG_SERIAL_DEC_CONSOLE
-static void dz_console_put_char(unsigned char ch)
+/*
+ * polling I/O routines
+ */
+static int dz_poll_tx_char(void *handle, unsigned char ch)
{
unsigned long flags;
- int loops = 2500;
- unsigned short tmp = ch;
- /* this code sends stuff out to serial device - spinning its
- wheels and waiting. */
+ struct dz_serial *info = handle;
+ unsigned short csr, tcr, trdy, mask;
+ int loops = 10000;
+ int ret;
- /* force the issue - point it at lines[3] */
- dz_console = &multi[CONSOLE_LINE];
+ local_irq_save(flags);
+ csr = dz_in(info, DZ_CSR);
+ dz_out(info, DZ_CSR, csr & ~DZ_TIE);
+ tcr = dz_in(info, DZ_TCR);
+ tcr |= 1 << info->line;
+ mask = tcr;
+ dz_out(info, DZ_TCR, mask);
+ iob();
+ local_irq_restore(flags);
- save_flags(flags);
- cli();
+ while (loops--) {
+ trdy = dz_in(info, DZ_CSR);
+ if (!(trdy & DZ_TRDY))
+ continue;
+ trdy = (trdy & DZ_TLINE) >> 8;
+ if (trdy == info->line)
+ break;
+ mask &= ~(1 << trdy);
+ dz_out(info, DZ_TCR, mask);
+ iob();
+ udelay(2);
+ }
+ if (loops) {
+ dz_out(info, DZ_TDR, ch);
+ ret = 0;
+ } else
+ ret = -EAGAIN;
- /* spin our wheels */
- while (((dz_in(dz_console, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--);
+ dz_out(info, DZ_TCR, tcr);
+ dz_out(info, DZ_CSR, csr);
- /* Actually transmit the character. */
- dz_out(dz_console, DZ_TDR, tmp);
+ return ret;
+}
- restore_flags(flags);
+static int dz_poll_rx_char(void *handle)
+{
+ return -ENODEV;
+}
+
+int register_dz_hook(unsigned int channel, struct dec_serial_hook *hook)
+{
+ struct dz_serial *info = multi + channel;
+
+ if (info->hook) {
+ printk("%s: line %d has already a hook registered\n",
+ __FUNCTION__, channel);
+
+ return 0;
+ } else {
+ hook->poll_rx_char = dz_poll_rx_char;
+ hook->poll_tx_char = dz_poll_tx_char;
+ info->hook = hook;
+
+ return 1;
+ }
+}
+
+int unregister_dz_hook(unsigned int channel)
+{
+ struct dz_serial *info = &multi[channel];
+
+ if (info->hook) {
+ info->hook = NULL;
+ return 1;
+ } else {
+ printk("%s: trying to unregister hook on line %d,"
+ " but none is registered\n", __FUNCTION__, channel);
+ return 0;
+ }
}
+
+#ifdef CONFIG_SERIAL_DEC_CONSOLE
/*
* -------------------------------------------------------------------
* dz_console_print ()
@@ -1465,17 +1570,19 @@ static void dz_console_put_char(unsigned
* The console must be locked when we get here.
* -------------------------------------------------------------------
*/
-static void dz_console_print(struct console *cons,
+static void dz_console_print(struct console *co,
const char *str,
unsigned int count)
{
+ struct dz_serial *info = multi + co->index;
+
#ifdef DEBUG_DZ
prom_printf((char *) str);
#endif
while (count--) {
if (*str == '\n')
- dz_console_put_char('\r');
- dz_console_put_char(*str++);
+ dz_poll_tx_char(info, '\r');
+ dz_poll_tx_char(info, *str++);
}
}
@@ -1486,12 +1593,12 @@ static kdev_t dz_console_device(struct c
static int __init dz_console_setup(struct console *co, char *options)
{
+ struct dz_serial *info = multi + co->index;
int baud = 9600;
int bits = 8;
int parity = 'n';
int cflag = CREAD | HUPCL | CLOCAL;
char *s;
- unsigned short mask, tmp;
if (options) {
baud = simple_strtoul(options, NULL, 10);
@@ -1542,44 +1649,31 @@ static int __init dz_console_setup(struc
}
co->cflag = cflag;
- /* TOFIX: force to console line */
- dz_console = &multi[CONSOLE_LINE];
if ((mips_machtype == MACH_DS23100) || (mips_machtype == MACH_DS5100))
- dz_console->port = KN01_DZ11_BASE;
+ info->port = KN01_DZ11_BASE;
else
- dz_console->port = KN02_DZ11_BASE;
- dz_console->line = CONSOLE_LINE;
+ info->port = KN02_DZ11_BASE;
+ info->line = co->index;
- dz_out(dz_console, DZ_CSR, DZ_CLR);
- while ((tmp = dz_in(dz_console, DZ_CSR)) & DZ_CLR);
+ dz_out(info, DZ_CSR, DZ_CLR);
+ while (dz_in(info, DZ_CSR) & DZ_CLR);
/* enable scanning */
- dz_out(dz_console, DZ_CSR, DZ_MSE);
+ dz_out(info, DZ_CSR, DZ_MSE);
/* Set up flags... */
- dz_console->cflags = 0;
- dz_console->cflags |= DZ_B9600;
- dz_console->cflags |= DZ_CS8;
- dz_console->cflags |= DZ_PARENB;
- dz_out(dz_console, DZ_LPR, dz_console->cflags);
-
- mask = 1 << dz_console->line;
- tmp = dz_in(dz_console, DZ_TCR); /* read the TX flag */
- if (!(tmp & mask)) {
- tmp |= mask; /* set the TX flag */
- dz_out(dz_console, DZ_TCR, tmp);
- }
+ dz_out(info, DZ_LPR, cflag | info->line);
+
return 0;
}
-static struct console dz_sercons =
-{
- .name = "ttyS",
- .write = dz_console_print,
- .device = dz_console_device,
- .setup = dz_console_setup,
- .flags = CON_CONSDEV | CON_PRINTBUFFER,
- .index = CONSOLE_LINE,
+static struct console dz_sercons = {
+ .name = "ttyS",
+ .write = dz_console_print,
+ .device = dz_console_device,
+ .setup = dz_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
};
void __init dz_serial_console_init(void)
Index: linux-2.4.35.4/drivers/char/dz.h
===================================================================
--- linux-2.4.35.4.orig/drivers/char/dz.h
+++ linux-2.4.35.4/drivers/char/dz.h
@@ -10,6 +10,8 @@
#ifndef DZ_SERIAL_H
#define DZ_SERIAL_H
+#include <asm/dec/serial.h>
+
#define SERIAL_MAGIC 0x5301
/*
@@ -17,6 +19,7 @@
*/
#define DZ_TRDY 0x8000 /* Transmitter empty */
#define DZ_TIE 0x4000 /* Transmitter Interrupt Enable */
+#define DZ_TLINE 0x0300 /* Transmitter Line Number */
#define DZ_RDONE 0x0080 /* Receiver data ready */
#define DZ_RIE 0x0040 /* Receive Interrupt Enable */
#define DZ_MSE 0x0020 /* Master Scan Enable */
@@ -37,19 +40,30 @@
#define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK)
/*
- * Definitions for the Transmit Register.
+ * Definitions for the Transmit Control Register.
*/
#define DZ_LINE_KEYBOARD 0x0001
#define DZ_LINE_MOUSE 0x0002
#define DZ_LINE_MODEM 0x0004
#define DZ_LINE_PRINTER 0x0008
+#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */
#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */
+#define DZ_PRINT_RTS 0x0200 /* RTS for the printer line (3) */
+#define DZ_PRINT_DTR 0x0100 /* DTR for the printer line (3) */
+#define DZ_LNENB 0x000f /* Transmitter Line Enable */
/*
* Definitions for the Modem Status Register.
*/
+#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */
+#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */
#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */
+#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */
+#define DZ_PRINT_RI 0x0008 /* RI for the printer line (2) */
+#define DZ_PRINT_CD 0x0004 /* CD for the printer line (2) */
+#define DZ_PRINT_DSR 0x0002 /* DSR for the printer line (2) */
+#define DZ_PRINT_CTS 0x0001 /* CTS for the printer line (2) */
/*
* Definitions for the Transmit Data Register.
@@ -115,9 +129,6 @@
#define DZ_EVENT_WRITE_WAKEUP 0
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-
#define DZ_INITIALIZED 0x80000000 /* Serial port was initialized */
#define DZ_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
#define DZ_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
@@ -129,6 +140,7 @@
#define DZ_CLOSING_WAIT_INF 0
#define DZ_CLOSING_WAIT_NONE 65535
+#define DZ_SAK 0x0004 /* Secure Attention Key (Orange book) */
#define DZ_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
#define DZ_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
#define DZ_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
@@ -166,79 +178,9 @@ struct dz_serial {
long session; /* Session of opening process */
long pgrp; /* pgrp of opening process */
+ struct dec_serial_hook *hook; /* Hook on this channel. */
unsigned char is_console; /* flag indicating a serial console */
unsigned char is_initialized;
};
-static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */
-static struct dz_serial *dz_console;
-static struct tty_driver serial_driver, callout_driver;
-
-static struct tty_struct *serial_table[DZ_NB_PORT];
-static struct termios *serial_termios[DZ_NB_PORT];
-static struct termios *serial_termios_locked[DZ_NB_PORT];
-
-static int serial_refcount;
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf;
-static DECLARE_MUTEX(tmp_buf_sem);
-
-static char *dz_name = "DECstation DZ serial driver version ";
-static char *dz_version = "1.02";
-
-static inline unsigned short dz_in (struct dz_serial *, unsigned);
-static inline void dz_out (struct dz_serial *, unsigned, unsigned short);
-
-static inline void dz_sched_event (struct dz_serial *, int);
-static inline void receive_chars (struct dz_serial *);
-static inline void transmit_chars (struct dz_serial *);
-static inline void check_modem_status (struct dz_serial *);
-
-static void dz_stop (struct tty_struct *);
-static void dz_start (struct tty_struct *);
-static void dz_interrupt (int, void *, struct pt_regs *);
-static void do_serial_bh (void);
-static void do_softint (void *);
-static void do_serial_hangup (void *);
-static void change_speed (struct dz_serial *);
-static void dz_flush_chars (struct tty_struct *);
-static void dz_console_print (struct console *, const char *, unsigned int);
-static void dz_flush_buffer (struct tty_struct *);
-static void dz_throttle (struct tty_struct *);
-static void dz_unthrottle (struct tty_struct *);
-static void dz_send_xchar (struct tty_struct *, char);
-static void shutdown (struct dz_serial *);
-static void send_break (struct dz_serial *, int);
-static void dz_set_termios (struct tty_struct *, struct termios *);
-static void dz_close (struct tty_struct *, struct file *);
-static void dz_hangup (struct tty_struct *);
-static void show_serial_version (void);
-
-static int dz_write (struct tty_struct *, int, const unsigned char *, int);
-static int dz_write_room (struct tty_struct *);
-static int dz_chars_in_buffer (struct tty_struct *);
-static int startup (struct dz_serial *);
-static int get_serial_info (struct dz_serial *, struct serial_struct *);
-static int set_serial_info (struct dz_serial *, struct serial_struct *);
-static int get_lsr_info (struct dz_serial *, unsigned int *);
-static int dz_ioctl (struct tty_struct *, struct file *, unsigned int, unsigned long);
-static int block_til_ready (struct tty_struct *, struct file *, struct dz_serial *);
-static int dz_open (struct tty_struct *, struct file *);
-
-#ifdef MODULE
-int init_module (void)
-void cleanup_module (void)
-#endif
-
-#endif
-
#endif /* DZ_SERIAL_H */
Index: linux-2.4.35.4/drivers/char/ibm_workpad_keymap.map
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/char/ibm_workpad_keymap.map
@@ -0,0 +1,343 @@
+# Keymap for IBM Workpad z50
+# US Mapping
+#
+# by Michael Klar <wyldfier@iname.com>
+#
+# This is a great big mess on account of how the Caps Lock key is handled as
+# LeftShift-RightShift. Right shift key had to be broken out, so don't use
+# use this map file as a basis for other keyboards that don't do the same
+# thing with Caps Lock.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+
+keymaps 0-2,4-5,8,12,32-33,36-37
+strings as usual
+
+keycode 0 = F1 F11 Console_13
+ shiftr keycode 0 = F11
+ shift shiftr keycode 0 = F11
+ control keycode 0 = F1
+ alt keycode 0 = Console_1
+ control alt keycode 0 = Console_1
+keycode 1 = F3 F13 Console_15
+ shiftr keycode 1 = F13
+ shift shiftr keycode 1 = F13
+ control keycode 1 = F3
+ alt keycode 1 = Console_3
+ control alt keycode 1 = Console_3
+keycode 2 = F5 F15 Console_17
+ shiftr keycode 2 = F15
+ shift shiftr keycode 2 = F15
+ control keycode 2 = F5
+ alt keycode 2 = Console_5
+ control alt keycode 2 = Console_5
+keycode 3 = F7 F17 Console_19
+ shiftr keycode 3 = F17
+ shift shiftr keycode 3 = F17
+ control keycode 3 = F7
+ alt keycode 3 = Console_7
+ control alt keycode 3 = Console_7
+keycode 4 = F9 F19 Console_21
+ shiftr keycode 4 = F19
+ shift shiftr keycode 4 = F19
+ control keycode 4 = F9
+ alt keycode 4 = Console_9
+ control alt keycode 4 = Console_9
+#keycode 5 is contrast down
+#keycode 6 is contrast up
+keycode 7 = F11 F11 Console_23
+ shiftr keycode 7 = F11
+ shift shiftr keycode 7 = F11
+ control keycode 7 = F11
+ alt keycode 7 = Console_11
+ control alt keycode 7 = Console_11
+keycode 8 = F2 F12 Console_14
+ shiftr keycode 8 = F12
+ shift shiftr keycode 8 = F12
+ control keycode 8 = F2
+ alt keycode 8 = Console_2
+ control alt keycode 8 = Console_2
+keycode 9 = F4 F14 Console_16
+ shiftr keycode 9 = F14
+ shift shiftr keycode 9 = F14
+ control keycode 9 = F4
+ alt keycode 9 = Console_4
+ control alt keycode 9 = Console_4
+keycode 10 = F6 F16 Console_18
+ shiftr keycode 10 = F16
+ shift shiftr keycode 10 = F16
+ control keycode 10 = F6
+ alt keycode 10 = Console_6
+ control alt keycode 10 = Console_6
+keycode 11 = F8 F18 Console_20
+ shiftr keycode 11 = F18
+ shift shiftr keycode 11 = F18
+ control keycode 11 = F8
+ alt keycode 11 = Console_8
+ control alt keycode 11 = Console_8
+keycode 12 = F10 F20 Console_22
+ shiftr keycode 12 = F20
+ shift shiftr keycode 12 = F20
+ control keycode 12 = F10
+ alt keycode 12 = Console_10
+ control alt keycode 12 = Console_10
+#keycode 13 is brightness down
+#keycode 14 is brightness up
+keycode 15 = F12 F12 Console_24
+ shiftr keycode 15 = F12
+ shift shiftr keycode 15 = F12
+ control keycode 15 = F12
+ alt keycode 15 = Console_12
+ control alt keycode 15 = Console_12
+keycode 16 = apostrophe quotedbl
+ shiftr keycode 16 = quotedbl
+ shift shiftr keycode 16 = quotedbl
+ control keycode 16 = Control_g
+ alt keycode 16 = Meta_apostrophe
+keycode 17 = bracketleft braceleft
+ shiftr keycode 17 = braceleft
+ shift shiftr keycode 17 = braceleft
+ control keycode 17 = Escape
+ alt keycode 17 = Meta_bracketleft
+keycode 18 = minus underscore backslash
+ shiftr keycode 18 = underscore
+ shift shiftr keycode 18 = underscore
+ control keycode 18 = Control_underscore
+ shift control keycode 18 = Control_underscore
+ shiftr control keycode 18 = Control_underscore
+ shift shiftr control keycode 18 = Control_underscore
+ alt keycode 18 = Meta_minus
+keycode 19 = zero parenright braceright
+ shiftr keycode 19 = parenright
+ shift shiftr keycode 19 = parenright
+ alt keycode 19 = Meta_zero
+keycode 20 = p
+ shiftr keycode 20 = +P
+ shift shiftr keycode 20 = +p
+keycode 21 = semicolon colon
+ shiftr keycode 21 = colon
+ shift shiftr keycode 21 = colon
+ alt keycode 21 = Meta_semicolon
+keycode 22 = Up Scroll_Backward
+ shiftr keycode 22 = Scroll_Backward
+ shift shiftr keycode 22 = Scroll_Backward
+ alt keycode 22 = Prior
+keycode 23 = slash question
+ shiftr keycode 23 = question
+ shift shiftr keycode 23 = question
+ control keycode 23 = Delete
+ alt keycode 23 = Meta_slash
+
+keycode 27 = nine parenleft bracketright
+ shiftr keycode 27 = parenleft
+ shift shiftr keycode 27 = parenleft
+ alt keycode 27 = Meta_nine
+keycode 28 = o
+ shiftr keycode 28 = +O
+ shift shiftr keycode 28 = +o
+keycode 29 = l
+ shiftr keycode 29 = +L
+ shift shiftr keycode 29 = +l
+keycode 30 = period greater
+ shiftr keycode 30 = greater
+ shift shiftr keycode 30 = greater
+ control keycode 30 = Compose
+ alt keycode 30 = Meta_period
+
+keycode 32 = Left Decr_Console
+ shiftr keycode 32 = Decr_Console
+ shift shiftr keycode 32 = Decr_Console
+ alt keycode 32 = Home
+keycode 33 = bracketright braceright asciitilde
+ shiftr keycode 33 = braceright
+ shift shiftr keycode 33 = braceright
+ control keycode 33 = Control_bracketright
+ alt keycode 33 = Meta_bracketright
+keycode 34 = equal plus
+ shiftr keycode 34 = plus
+ shift shiftr keycode 34 = plus
+ alt keycode 34 = Meta_equal
+keycode 35 = eight asterisk bracketleft
+ shiftr keycode 35 = asterisk
+ shift shiftr keycode 35 = asterisk
+ control keycode 35 = Delete
+ alt keycode 35 = Meta_eight
+keycode 36 = i
+ shiftr keycode 36 = +I
+ shift shiftr keycode 36 = +i
+keycode 37 = k
+ shiftr keycode 37 = +K
+ shift shiftr keycode 37 = +k
+keycode 38 = comma less
+ shiftr keycode 38 = less
+ shift shiftr keycode 38 = less
+ alt keycode 38 = Meta_comma
+
+keycode 40 = h
+ shiftr keycode 40 = +H
+ shift shiftr keycode 40 = +h
+keycode 41 = y
+ shiftr keycode 41 = +Y
+ shift shiftr keycode 41 = +y
+keycode 42 = six asciicircum
+ shiftr keycode 42 = asciicircum
+ shift shiftr keycode 42 = asciicircum
+ control keycode 42 = Control_asciicircum
+ alt keycode 42 = Meta_six
+keycode 43 = seven ampersand braceleft
+ shiftr keycode 43 = ampersand
+ shift shiftr keycode 43 = ampersand
+ control keycode 43 = Control_underscore
+ alt keycode 43 = Meta_seven
+keycode 44 = u
+ shiftr keycode 44 = +U
+ shift shiftr keycode 44 = +u
+keycode 45 = j
+ shiftr keycode 45 = +J
+ shift shiftr keycode 45 = +j
+keycode 46 = m
+ shiftr keycode 46 = +M
+ shift shiftr keycode 46 = +m
+keycode 47 = n
+ shiftr keycode 47 = +N
+ shift shiftr keycode 47 = +n
+
+# This is the "Backspace" key:
+keycode 49 = Delete Delete
+ shiftr keycode 49 = Delete
+ shift shiftr keycode 49 = Delete
+ control keycode 49 = BackSpace
+ alt keycode 49 = Meta_Delete
+keycode 50 = Num_Lock
+ shift keycode 50 = Bare_Num_Lock
+ shiftr keycode 50 = Bare_Num_Lock
+ shift shiftr keycode 50 = Bare_Num_Lock
+# This is the "Delete" key:
+keycode 51 = Remove
+ control alt keycode 51 = Boot
+
+keycode 53 = backslash bar
+ shiftr keycode 53 = bar
+ shift shiftr keycode 53 = bar
+ control keycode 53 = Control_backslash
+ alt keycode 53 = Meta_backslash
+keycode 54 = Return
+ alt keycode 54 = Meta_Control_m
+keycode 55 = space space
+ shiftr keycode 55 = space
+ shift shiftr keycode 55 = space
+ control keycode 55 = nul
+ alt keycode 55 = Meta_space
+keycode 56 = g
+ shiftr keycode 56 = +G
+ shift shiftr keycode 56 = +g
+keycode 57 = t
+ shiftr keycode 57 = +T
+ shift shiftr keycode 57 = +t
+keycode 58 = five percent
+ shiftr keycode 58 = percent
+ shift shiftr keycode 58 = percent
+ control keycode 58 = Control_bracketright
+ alt keycode 58 = Meta_five
+keycode 59 = four dollar dollar
+ shiftr keycode 59 = dollar
+ shift shiftr keycode 59 = dollar
+ control keycode 59 = Control_backslash
+ alt keycode 59 = Meta_four
+keycode 60 = r
+ shiftr keycode 60 = +R
+ shift shiftr keycode 60 = +r
+keycode 61 = f
+ shiftr keycode 61 = +F
+ shift shiftr keycode 61 = +f
+ altgr keycode 61 = Hex_F
+keycode 62 = v
+ shiftr keycode 62 = +V
+ shift shiftr keycode 62 = +v
+keycode 63 = b
+ shiftr keycode 63 = +B
+ shift shiftr keycode 63 = +b
+ altgr keycode 63 = Hex_B
+
+keycode 67 = three numbersign
+ shiftr keycode 67 = numbersign
+ shift shiftr keycode 67 = numbersign
+ control keycode 67 = Escape
+ alt keycode 67 = Meta_three
+keycode 68 = e
+ shiftr keycode 68 = +E
+ shift shiftr keycode 68 = +e
+ altgr keycode 68 = Hex_E
+keycode 69 = d
+ shiftr keycode 69 = +D
+ shift shiftr keycode 69 = +d
+ altgr keycode 69 = Hex_D
+keycode 70 = c
+ shiftr keycode 70 = +C
+ shift shiftr keycode 70 = +c
+ altgr keycode 70 = Hex_C
+keycode 71 = Right Incr_Console
+ shiftr keycode 71 = Incr_Console
+ shift shiftr keycode 71 = Incr_Console
+ alt keycode 71 = End
+
+keycode 75 = two at at
+ shiftr keycode 75 = at
+ shift shiftr keycode 75 = at
+ control keycode 75 = nul
+ shift control keycode 75 = nul
+ shiftr control keycode 75 = nul
+ shift shiftr control keycode 75 = nul
+ alt keycode 75 = Meta_two
+keycode 76 = w
+ shiftr keycode 76 = +W
+ shift shiftr keycode 76 = +w
+keycode 77 = s
+ shiftr keycode 77 = +S
+ shift shiftr keycode 77 = +s
+keycode 78 = x
+ shiftr keycode 78 = +X
+ shift shiftr keycode 78 = +x
+keycode 79 = Down Scroll_Forward
+ shiftr keycode 79 = Scroll_Forward
+ shift shiftr keycode 79 = Scroll_Forward
+ alt keycode 79 = Next
+keycode 80 = Escape Escape
+ shiftr keycode 80 = Escape
+ shift shiftr keycode 80 = Escape
+ alt keycode 80 = Meta_Escape
+keycode 81 = Tab Tab
+ shiftr keycode 81 = Tab
+ shift shiftr keycode 81 = Tab
+ alt keycode 81 = Meta_Tab
+keycode 82 = grave asciitilde
+ shiftr keycode 82 = asciitilde
+ shift shiftr keycode 82 = asciitilde
+ control keycode 82 = nul
+ alt keycode 82 = Meta_grave
+keycode 83 = one exclam
+ shiftr keycode 83 = exclam
+ shift shiftr keycode 83 = exclam
+ alt keycode 83 = Meta_one
+keycode 84 = q
+ shiftr keycode 84 = +Q
+ shift shiftr keycode 84 = +q
+keycode 85 = a
+ shiftr keycode 85 = +A
+ shift shiftr keycode 85 = +a
+ altgr keycode 85 = Hex_A
+keycode 86 = z
+ shiftr keycode 86 = +Z
+ shift shiftr keycode 86 = +z
+
+# This is the windows key:
+keycode 88 = Decr_Console
+keycode 89 = Shift
+keycode 90 = Control
+keycode 91 = Control
+keycode 92 = Alt
+keycode 93 = AltGr
+keycode 94 = ShiftR
+ shift keycode 94 = Caps_Lock
Index: linux-2.4.35.4/drivers/char/indydog.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/indydog.c
+++ linux-2.4.35.4/drivers/char/indydog.c
@@ -1,5 +1,5 @@
/*
- * IndyDog 0.2 A Hardware Watchdog Device for SGI IP22
+ * IndyDog 0.3 A Hardware Watchdog Device for SGI IP22
*
* (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
*
@@ -7,10 +7,10 @@
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
- *
+ *
* based on softdog.c by Alan Cox <alan@redhat.com>
*/
-
+
#include <linux/module.h>
#include <linux/config.h>
#include <linux/types.h>
@@ -19,13 +19,12 @@
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
-#include <linux/smp_lock.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/sgi/mc.h>
-static unsigned long indydog_alive;
-static int expect_close = 0;
+#define PFX "indydog: "
+static int indydog_alive;
#ifdef CONFIG_WATCHDOG_NOWAYOUT
static int nowayout = 1;
@@ -33,10 +32,30 @@ static int nowayout = 1;
static int nowayout = 0;
#endif
+#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */
+
MODULE_PARM(nowayout,"i");
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
-static inline void indydog_ping(void)
+static void indydog_start(void)
+{
+ u32 mc_ctrl0 = sgimc->cpuctrl0;
+
+ mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG;
+ sgimc->cpuctrl0 = mc_ctrl0;
+}
+
+static void indydog_stop(void)
+{
+ u32 mc_ctrl0 = sgimc->cpuctrl0;
+
+ mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG;
+ sgimc->cpuctrl0 = mc_ctrl0;
+
+ printk(KERN_INFO PFX "Stopped watchdog timer.\n");
+}
+
+static void indydog_ping(void)
{
sgimc->watchdogt = 0;
}
@@ -46,18 +65,14 @@ static inline void indydog_ping(void)
*/
static int indydog_open(struct inode *inode, struct file *file)
{
- u32 mc_ctrl0;
-
- if (test_and_set_bit(0,&indydog_alive))
+ if (indydog_alive)
return -EBUSY;
- if (nowayout) {
+ if (nowayout)
MOD_INC_USE_COUNT;
- }
/* Activate timer */
- mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG;
- sgimc->cpuctrl0 = mc_ctrl0;
+ indydog_start();
indydog_ping();
indydog_alive = 1;
@@ -69,63 +84,48 @@ static int indydog_open(struct inode *in
static int indydog_release(struct inode *inode, struct file *file)
{
/* Shut off the timer.
- * Lock it in if it's a module and we set nowayout. */
- lock_kernel();
- if (expect_close) {
- u32 mc_ctrl0 = sgimc->cpuctrl0;
+ * Lock it in if it's a module and we defined ...NOWAYOUT */
+ if (!nowayout) {
+ u32 mc_ctrl0 = sgimc->cpuctrl0;
mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG;
sgimc->cpuctrl0 = mc_ctrl0;
printk(KERN_INFO "Stopped watchdog timer.\n");
- } else
- printk(KERN_CRIT "WDT device closed unexpectedly. WDT will not stop!\n");
- clear_bit(0, &indydog_alive);
- unlock_kernel();
+ }
+ indydog_alive = 0;
return 0;
}
static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos)
{
- /* Can't seek (pwrite) on this device */
+ /* Can't seek (pwrite) on this device */
if (ppos != &file->f_pos)
return -ESPIPE;
- /*
- * Refresh the timer.
- */
+ /* Refresh the timer. */
if (len) {
- if (!nowayout) {
- size_t i;
-
- /* In case it was set long ago */
- expect_close = 0;
-
- for (i = 0; i != len; i++) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- expect_close = 1;
- }
- }
indydog_ping();
- return 1;
}
- return 0;
+ return len;
}
static int indydog_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ int options, retval = -EINVAL;
static struct watchdog_info ident = {
- options: WDIOF_MAGICCLOSE,
- identity: "Hardware Watchdog for SGI IP22",
+ .options = WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = "Hardware Watchdog for SGI IP22",
};
+
switch (cmd) {
default:
return -ENOIOCTLCMD;
case WDIOC_GETSUPPORT:
- if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
+ if (copy_to_user((struct watchdog_info *)arg,
+ &ident, sizeof(ident)))
return -EFAULT;
return 0;
case WDIOC_GETSTATUS:
@@ -134,31 +134,53 @@ static int indydog_ioctl(struct inode *i
case WDIOC_KEEPALIVE:
indydog_ping();
return 0;
+ case WDIOC_GETTIMEOUT:
+ return put_user(WATCHDOG_TIMEOUT,(int *)arg);
+ case WDIOC_SETOPTIONS:
+ {
+ if (get_user(options, (int *)arg))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ indydog_stop();
+ retval = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ indydog_start();
+ retval = 0;
+ }
+
+ return retval;
+ }
}
}
static struct file_operations indydog_fops = {
- owner: THIS_MODULE,
- write: indydog_write,
- ioctl: indydog_ioctl,
- open: indydog_open,
- release: indydog_release,
+ .owner = THIS_MODULE,
+ .write = indydog_write,
+ .ioctl = indydog_ioctl,
+ .open = indydog_open,
+ .release = indydog_release,
};
static struct miscdevice indydog_miscdev = {
- minor: WATCHDOG_MINOR,
- name: "watchdog",
- fops: &indydog_fops,
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &indydog_fops,
};
-static const char banner[] __initdata = KERN_INFO "Hardware Watchdog Timer for SGI IP22: 0.2\n";
+static char banner[] __initdata =
+ KERN_INFO PFX "Hardware Watchdog Timer for SGI IP22: 0.3\n";
static int __init watchdog_init(void)
{
int ret = misc_register(&indydog_miscdev);
-
- if (ret)
+ if (ret) {
+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
return ret;
+ }
printk(banner);
@@ -172,4 +194,7 @@ static void __exit watchdog_exit(void)
module_init(watchdog_init);
module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
+MODULE_DESCRIPTION("Hardware Watchdog Device for SGI IP22");
MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/char/ip27-rtc.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/ip27-rtc.c
+++ linux-2.4.35.4/drivers/char/ip27-rtc.c
@@ -44,6 +44,7 @@
#include <asm/sn/klconfig.h>
#include <asm/sn/sn0/ip27.h>
#include <asm/sn/sn0/hub.h>
+#include <asm/sn/sn_private.h>
static int rtc_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
@@ -209,11 +210,8 @@ static struct miscdevice rtc_dev=
static int __init rtc_init(void)
{
- nasid_t nid;
-
- nid = get_nasid();
rtc = (struct m48t35_rtc *)
- (KL_CONFIG_CH_CONS_INFO(nid)->memory_base + IOC3_BYTEBUS_DEV0);
+ (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0);
printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION);
if (misc_register(&rtc_dev)) {
@@ -325,3 +323,7 @@ static void get_rtc_time(struct rtc_time
rtc_tm->tm_mon--;
}
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_DESCRIPTION("SGI IP27 M48T35 RTC driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/char/Makefile
===================================================================
--- linux-2.4.35.4.orig/drivers/char/Makefile
+++ linux-2.4.35.4/drivers/char/Makefile
@@ -48,7 +48,12 @@ ifeq ($(ARCH),mips)
KEYBD =
endif
ifeq ($(CONFIG_VR41XX_KIU),y)
- KEYMAP =
+ ifeq ($(CONFIG_IBM_WORKPAD),y)
+ KEYMAP = ibm_workpad_keymap.o
+ endif
+ ifeq ($(CONFIG_VICTOR_MPC30X),y)
+ KEYMAP = victor_mpc30x_keymap.o
+ endif
KEYBD = vr41xx_keyb.o
endif
endif
@@ -251,7 +256,6 @@ obj-$(CONFIG_MK712_MOUSE) += mk712.o
obj-$(CONFIG_RTC) += rtc.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
obj-$(CONFIG_EFI_RTC) += efirtc.o
-obj-$(CONFIG_SGI_DS1286) += ds1286.o
obj-$(CONFIG_MIPS_RTC) += mips_rtc.o
obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o
ifeq ($(CONFIG_PPC),)
@@ -259,6 +263,7 @@ ifeq ($(CONFIG_PPC),)
endif
obj-$(CONFIG_TOSHIBA) += toshiba.o
obj-$(CONFIG_I8K) += i8k.o
+obj-$(CONFIG_DS1286) += ds1286.o
obj-$(CONFIG_DS1620) += ds1620.o
obj-$(CONFIG_DS1742) += ds1742.o
obj-$(CONFIG_INTEL_RNG) += i810_rng.o
@@ -269,6 +274,7 @@ obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o
obj-$(CONFIG_ITE_GPIO) += ite_gpio.o
obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o
+obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o
obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o
obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o
obj-$(CONFIG_COBALT_LCD) += lcd.o
@@ -355,3 +361,9 @@ defkeymap.c: defkeymap.map
qtronixmap.c: qtronixmap.map
set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+
+ibm_workpad_keymap.c: ibm_workpad_keymap.map
+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
+
+victor_mpc30x_keymap.c: victor_mpc30x_keymap.map
+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@
Index: linux-2.4.35.4/drivers/char/mips_rtc.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/mips_rtc.c
+++ linux-2.4.35.4/drivers/char/mips_rtc.c
@@ -53,14 +53,6 @@
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
-
-/*
- * Check machine
- */
-#if !defined(CONFIG_MIPS) || !defined(CONFIG_NEW_TIME_C)
-#error "This driver is for MIPS machines with CONFIG_NEW_TIME_C defined"
-#endif
-
#include <asm/time.h>
static unsigned long rtc_status = 0; /* bitmapped status byte. */
Index: linux-2.4.35.4/drivers/char/sb1250_duart.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/sb1250_duart.c
+++ linux-2.4.35.4/drivers/char/sb1250_duart.c
@@ -328,10 +328,11 @@ static int duart_write(struct tty_struct
if (c <= 0) break;
if (from_user) {
+ spin_unlock_irqrestore(&us->outp_lock, flags);
if (copy_from_user(us->outp_buf + us->outp_tail, buf, c)) {
- spin_unlock_irqrestore(&us->outp_lock, flags);
return -EFAULT;
}
+ spin_lock_irqsave(&us->outp_lock, flags);
} else {
memcpy(us->outp_buf + us->outp_tail, buf, c);
}
@@ -498,9 +499,31 @@ static void duart_set_termios(struct tty
duart_set_cflag(us->line, tty->termios->c_cflag);
}
+static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) {
+
+ struct serial_struct tmp;
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ tmp.type=PORT_SB1250;
+ tmp.line=us->line;
+ tmp.port=A_DUART_CHANREG(tmp.line,0);
+ tmp.irq=K_INT_UART_0 + tmp.line;
+ tmp.xmit_fifo_size=16; /* fixed by hw */
+ tmp.baud_base=5000000;
+ tmp.io_type=SERIAL_IO_MEM;
+
+ if (copy_to_user(retinfo,&tmp,sizeof(*retinfo)))
+ return -EFAULT;
+
+ return 0;
+}
+
static int duart_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
+ uart_state_t *us = (uart_state_t *) tty->driver_data;
+
/* if (serial_paranoia_check(info, tty->device, "rs_ioctl"))
return -ENODEV;*/
switch (cmd) {
@@ -517,7 +540,7 @@ static int duart_ioctl(struct tty_struct
printk("Ignoring TIOCMSET\n");
break;
case TIOCGSERIAL:
- printk("Ignoring TIOCGSERIAL\n");
+ return get_serial_info(us,(struct serial_struct *) arg);
break;
case TIOCSSERIAL:
printk("Ignoring TIOCSSERIAL\n");
Index: linux-2.4.35.4/drivers/char/serial.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/serial.c
+++ linux-2.4.35.4/drivers/char/serial.c
@@ -62,6 +62,12 @@
* Robert Schwebel <robert@schwebel.de>,
* Juergen Beisert <jbeisert@eurodsn.de>,
* Theodore Ts'o <tytso@mit.edu>
+ *
+ * 10/00: Added suport for MIPS Atlas board.
+ * 11/00: Hooks for serial kernel debug port support added.
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard,
+ * carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*/
static char *serial_version = "5.05c";
@@ -413,6 +419,22 @@ static inline int serial_paranoia_check(
return 0;
}
+#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD)
+
+#include <asm/mips-boards/atlas.h>
+
+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
+{
+ return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff);
+}
+
+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value)
+{
+ *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value;
+}
+
+#else
+
static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset)
{
switch (info->io_type) {
@@ -447,6 +469,8 @@ static _INLINE_ void serial_out(struct a
outb(value, info->port+offset);
}
}
+#endif
+
/*
* We used to support using pause I/O for certain machines. We
Index: linux-2.4.35.4/drivers/char/victor_mpc30x_keymap.map
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/char/victor_mpc30x_keymap.map
@@ -0,0 +1,102 @@
+# Victor Interlink MP-C303/304 keyboard keymap
+#
+# Copyright (C) 2003 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+keymaps 0-1,4-5,8-9,12
+alt_is_meta
+strings as usual
+compose as usual for "iso-8859-1"
+
+# First line
+keycode 89 = Escape
+keycode 9 = Delete
+
+# 2nd line
+keycode 73 = one exclam
+keycode 18 = two quotedbl
+keycode 92 = three numbersign
+ control keycode 92 = Escape
+keycode 53 = four dollar
+ control keycode 53 = Control_backslash
+keycode 21 = five percent
+ control keycode 21 = Control_bracketright
+keycode 50 = six ampersand
+ control keycode 50 = Control_underscore
+keycode 48 = seven apostrophe
+keycode 51 = eight parenleft
+keycode 16 = nine parenright
+keycode 80 = zero asciitilde
+ control keycode 80 = nul
+keycode 49 = minus equal
+keycode 30 = asciicircum asciitilde
+ control keycode 30 = Control_asciicircum
+keycode 5 = backslash bar
+ control keycode 5 = Control_backslash
+keycode 13 = BackSpace
+# 3rd line
+keycode 57 = Tab
+keycode 74 = q
+keycode 26 = w
+keycode 81 = e
+keycode 29 = r
+keycode 37 = t
+keycode 45 = y
+keycode 72 = u
+keycode 24 = i
+keycode 32 = o
+keycode 41 = p
+keycode 1 = at grave
+ control keycode 1 = nul
+keycode 54 = bracketleft braceleft
+keycode 63 = Return
+ alt keycode 63 = Meta_Control_m
+# 4th line
+keycode 23 = Caps_Lock
+keycode 34 = a
+keycode 66 = s
+keycode 52 = d
+keycode 20 = f
+keycode 84 = g
+keycode 67 = h
+keycode 64 = j
+keycode 17 = k
+keycode 83 = l
+keycode 22 = semicolon plus
+keycode 61 = colon asterisk
+ control keycode 61 = Control_g
+keycode 65 = bracketright braceright
+ control keycode 65 = Control_bracketright
+# 5th line
+keycode 91 = Shift
+keycode 76 = z
+keycode 68 = x
+keycode 28 = c
+keycode 36 = v
+keycode 44 = b
+keycode 19 = n
+keycode 27 = m
+keycode 35 = comma less
+keycode 3 = period greater
+ control keycode 3 = Compose
+keycode 38 = slash question
+ control keycode 38 = Delete
+ shift control keycode 38 = Delete
+keycode 6 = backslash underscore
+ control keycode 6 = Control_backslash
+keycode 55 = Up
+ alt keycode 55 = PageUp
+keycode 14 = Shift
+# 6th line
+keycode 56 = Control
+keycode 42 = Alt
+keycode 33 = space
+ control keycode 33 = nul
+keycode 7 = Left
+ alt keycode 7 = Home
+keycode 31 = Down
+ alt keycode 31 = PageDown
+keycode 47 = Right
+ alt keycode 47 = End
Index: linux-2.4.35.4/drivers/char/vr41xx_keyb.c
===================================================================
--- linux-2.4.35.4.orig/drivers/char/vr41xx_keyb.c
+++ linux-2.4.35.4/drivers/char/vr41xx_keyb.c
@@ -308,7 +308,7 @@ void __devinit kbd_init_hw(void)
if (found != 0) {
kiu_base = VRC4173_KIU_OFFSET;
mkiuintreg = VRC4173_MKIUINTREG_OFFSET;
- vrc4173_clock_supply(VRC4173_KIU_CLOCK);
+ vrc4173_supply_clock(VRC4173_KIU_CLOCK);
}
}
#endif
@@ -325,7 +325,7 @@ void __devinit kbd_init_hw(void)
if (current_cpu_data.cputype == CPU_VR4111 ||
current_cpu_data.cputype == CPU_VR4121)
- vr41xx_clock_supply(KIU_CLOCK);
+ vr41xx_supply_clock(KIU_CLOCK);
kiu_writew(KIURST_KIURST, KIURST);
Index: linux-2.4.35.4/drivers/i2c/Config.in
===================================================================
--- linux-2.4.35.4.orig/drivers/i2c/Config.in
+++ linux-2.4.35.4/drivers/i2c/Config.in
@@ -57,6 +57,10 @@ if [ "$CONFIG_I2C" != "n" ]; then
if [ "$CONFIG_SGI_IP22" = "y" ]; then
dep_tristate 'I2C SGI interfaces' CONFIG_I2C_ALGO_SGI $CONFIG_I2C
fi
+
+ if [ "$CONFIG_SOC_AU1550" = "y" -o "$CONFIG_SOC_AU1200" ]; then
+ dep_tristate 'Au1550/Au1200 SMBus interface' CONFIG_I2C_ALGO_AU1550 $CONFIG_I2C
+ fi
# This is needed for automatic patch generation: sensors code starts here
# This is needed for automatic patch generation: sensors code ends here
Index: linux-2.4.35.4/drivers/i2c/i2c-algo-au1550.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/i2c/i2c-algo-au1550.c
@@ -0,0 +1,340 @@
+/*
+ * i2c-algo-au1550.c: SMBus (i2c) driver algorithms for Alchemy PSC interface
+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
+ *
+ * The documentation describes this as an SMBus controller, but it doesn't
+ * understand any of the SMBus protocol in hardware. It's really an I2C
+ * controller that could emulate most of the SMBus in software.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/au1000.h>
+#include <asm/au1xxx_psc.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-au1550.h>
+
+static int
+wait_xfer_done(struct i2c_algo_au1550_data *adap)
+{
+ u32 stat;
+ int i;
+ volatile psc_smb_t *sp;
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ /* Wait for Tx FIFO Underflow.
+ */
+ for (i = 0; i < adap->xfer_timeout; i++) {
+ stat = sp->psc_smbevnt;
+ au_sync();
+ if ((stat & PSC_SMBEVNT_TU) != 0) {
+ /* Clear it. */
+ sp->psc_smbevnt = PSC_SMBEVNT_TU;
+ au_sync();
+ return 0;
+ }
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int
+wait_ack(struct i2c_algo_au1550_data *adap)
+{
+ u32 stat;
+ volatile psc_smb_t *sp;
+
+ if (wait_xfer_done(adap))
+ return -ETIMEDOUT;
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ stat = sp->psc_smbevnt;
+ au_sync();
+
+ if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int
+wait_master_done(struct i2c_algo_au1550_data *adap)
+{
+ u32 stat;
+ int i;
+ volatile psc_smb_t *sp;
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ /* Wait for Master Done.
+ */
+ for (i = 0; i < adap->xfer_timeout; i++) {
+ stat = sp->psc_smbevnt;
+ au_sync();
+ if ((stat & PSC_SMBEVNT_MD) != 0)
+ return 0;
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int
+do_address(struct i2c_algo_au1550_data *adap, unsigned int addr, int rd)
+{
+ volatile psc_smb_t *sp;
+ u32 stat;
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ /* Reset the FIFOs, clear events.
+ */
+ sp->psc_smbpcr = PSC_SMBPCR_DC;
+ sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
+ au_sync();
+ do {
+ stat = sp->psc_smbpcr;
+ au_sync();
+ } while ((stat & PSC_SMBPCR_DC) != 0);
+
+ /* Write out the i2c chip address and specify operation
+ */
+ addr <<= 1;
+ if (rd)
+ addr |= 1;
+
+ /* Put byte into fifo, start up master.
+ */
+ sp->psc_smbtxrx = addr;
+ au_sync();
+ sp->psc_smbpcr = PSC_SMBPCR_MS;
+ au_sync();
+ if (wait_ack(adap))
+ return -EIO;
+ return 0;
+}
+
+static u32
+wait_for_rx_byte(struct i2c_algo_au1550_data *adap, u32 *ret_data)
+{
+ int j;
+ u32 data, stat;
+ volatile psc_smb_t *sp;
+
+ if (wait_xfer_done(adap))
+ return -EIO;
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ j = adap->xfer_timeout * 100;
+ do {
+ j--;
+ if (j <= 0)
+ return -EIO;
+
+ stat = sp->psc_smbstat;
+ au_sync();
+ if ((stat & PSC_SMBSTAT_RE) == 0)
+ j = 0;
+ else
+ udelay(1);
+ } while (j > 0);
+ data = sp->psc_smbtxrx;
+ au_sync();
+ *ret_data = data;
+
+ return 0;
+}
+
+static int
+i2c_read(struct i2c_algo_au1550_data *adap, unsigned char *buf,
+ unsigned int len)
+{
+ int i;
+ u32 data;
+ volatile psc_smb_t *sp;
+
+ if (len == 0)
+ return 0;
+
+ /* A read is performed by stuffing the transmit fifo with
+ * zero bytes for timing, waiting for bytes to appear in the
+ * receive fifo, then reading the bytes.
+ */
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ i = 0;
+ while (i < (len-1)) {
+ sp->psc_smbtxrx = 0;
+ au_sync();
+ if (wait_for_rx_byte(adap, &data))
+ return -EIO;
+
+ buf[i] = data;
+ i++;
+ }
+
+ /* The last byte has to indicate transfer done.
+ */
+ sp->psc_smbtxrx = PSC_SMBTXRX_STP;
+ au_sync();
+ if (wait_master_done(adap))
+ return -EIO;
+
+ data = sp->psc_smbtxrx;
+ au_sync();
+ buf[i] = data;
+ return 0;
+}
+
+static int
+i2c_write(struct i2c_algo_au1550_data *adap, unsigned char *buf,
+ unsigned int len)
+{
+ int i;
+ u32 data;
+ volatile psc_smb_t *sp;
+
+ if (len == 0)
+ return 0;
+
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+
+ i = 0;
+ while (i < (len-1)) {
+ data = buf[i];
+ sp->psc_smbtxrx = data;
+ au_sync();
+ if (wait_ack(adap))
+ return -EIO;
+ i++;
+ }
+
+ /* The last byte has to indicate transfer done.
+ */
+ data = buf[i];
+ data |= PSC_SMBTXRX_STP;
+ sp->psc_smbtxrx = data;
+ au_sync();
+ if (wait_master_done(adap))
+ return -EIO;
+ return 0;
+}
+
+static int
+au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
+{
+ struct i2c_algo_au1550_data *adap = i2c_adap->algo_data;
+ struct i2c_msg *p;
+ int i, err = 0;
+
+ for (i = 0; !err && i < num; i++) {
+ p = &msgs[i];
+ err = do_address(adap, p->addr, p->flags & I2C_M_RD);
+ if (err || !p->len)
+ continue;
+ if (p->flags & I2C_M_RD)
+ err = i2c_read(adap, p->buf, p->len);
+ else
+ err = i2c_write(adap, p->buf, p->len);
+ }
+
+ /* Return the number of messages processed, or the error code.
+ */
+ if (err == 0)
+ err = num;
+ return err;
+}
+
+static u32
+au1550_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm au1550_algo = {
+ .name = "Au1550 algorithm",
+ .id = I2C_ALGO_AU1550,
+ .master_xfer = au1550_xfer,
+ .functionality = au1550_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ * Prior to calling us, the 50MHz clock frequency and routing
+ * must have been set up for the PSC indicated by the adapter.
+ */
+int
+i2c_au1550_add_bus(struct i2c_adapter *i2c_adap)
+{
+ struct i2c_algo_au1550_data *adap = i2c_adap->algo_data;
+ volatile psc_smb_t *sp;
+ u32 stat;
+
+ i2c_adap->algo = &au1550_algo;
+
+ /* Now, set up the PSC for SMBus PIO mode.
+ */
+ sp = (volatile psc_smb_t *)(adap->psc_base);
+ sp->psc_ctrl = PSC_CTRL_DISABLE;
+ au_sync();
+ sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
+ sp->psc_smbcfg = 0;
+ au_sync();
+ sp->psc_ctrl = PSC_CTRL_ENABLE;
+ au_sync();
+ do {
+ stat = sp->psc_smbstat;
+ au_sync();
+ } while ((stat & PSC_SMBSTAT_SR) == 0);
+
+ sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
+ PSC_SMBCFG_DD_DISABLE);
+
+ /* Divide by 8 to get a 6.25 MHz clock. The later protocol
+ * timings are based on this clock.
+ */
+ sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV2);
+ sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
+ au_sync();
+
+ /* Set the protocol timer values. See Table 71 in the
+ * Au1550 Data Book for standard timing values.
+ */
+ sp->psc_smbtmr = PSC_SMBTMR_SET_TH(2) | PSC_SMBTMR_SET_PS(15) | \
+ PSC_SMBTMR_SET_PU(11) | PSC_SMBTMR_SET_SH(11) | \
+ PSC_SMBTMR_SET_SU(11) | PSC_SMBTMR_SET_CL(15) | \
+ PSC_SMBTMR_SET_CH(11);
+ au_sync();
+
+ sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
+ do {
+ stat = sp->psc_smbstat;
+ au_sync();
+ } while ((stat & PSC_SMBSTAT_DR) == 0);
+
+ return i2c_add_adapter(i2c_adap);
+}
+
+
+int
+i2c_au1550_del_bus(struct i2c_adapter *adap)
+{
+ return i2c_del_adapter(adap);
+}
+
+EXPORT_SYMBOL(i2c_au1550_add_bus);
+EXPORT_SYMBOL(i2c_au1550_del_bus);
+
+MODULE_AUTHOR("Dan Malek <dan@embeddededge.com>");
+MODULE_DESCRIPTION("SMBus Au1550 algorithm");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/i2c/i2c-au1550.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/i2c/i2c-au1550.c
@@ -0,0 +1,154 @@
+/*
+ * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
+ *
+ * This is just a skeleton adapter to use with the Au1550 PSC
+ * algorithm. It was developed for the Pb1550, but will work with
+ * any Au1550 board that has a similar PSC configuration.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+#include <asm/au1000.h>
+#include <asm/au1xxx_psc.h>
+#if defined( CONFIG_MIPS_PB1550 )
+ #include <asm/pb1550.h>
+#endif
+#if defined( CONFIG_MIPS_PB1200 )
+ #include <asm/pb1200.h>
+#endif
+#if defined( CONFIG_MIPS_DB1200 )
+ #include <asm/db1200.h>
+#endif
+#if defined( CONFIG_MIPS_FICMMP )
+ #include <asm/ficmmp.h>
+#endif
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-au1550.h>
+
+
+
+static int
+pb1550_reg(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int
+pb1550_unreg(struct i2c_client *client)
+{
+ return 0;
+}
+
+static void
+pb1550_inc_use(struct i2c_adapter *adap)
+{
+#ifdef MODULE
+ MOD_INC_USE_COUNT;
+#endif
+}
+
+static void
+pb1550_dec_use(struct i2c_adapter *adap)
+{
+#ifdef MODULE
+ MOD_DEC_USE_COUNT;
+#endif
+}
+
+static struct i2c_algo_au1550_data pb1550_i2c_info = {
+ SMBUS_PSC_BASE, 200, 200
+};
+
+static struct i2c_adapter pb1550_board_adapter = {
+ name: "pb1550 adapter",
+ id: I2C_HW_AU1550_PSC,
+ algo: NULL,
+ algo_data: &pb1550_i2c_info,
+ inc_use: pb1550_inc_use,
+ dec_use: pb1550_dec_use,
+ client_register: pb1550_reg,
+ client_unregister: pb1550_unreg,
+ client_count: 0,
+};
+
+int __init
+i2c_pb1550_init(void)
+{
+ /* This is where we would set up a 50MHz clock source
+ * and routing. On the Pb1550, the SMBus is PSC2, which
+ * uses a shared clock with USB. This has been already
+ * configured by Yamon as a 48MHz clock, close enough
+ * for our work.
+ */
+ if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+/* BIG hack to support the control interface on the Wolfson WM8731
+ * audio codec on the Pb1550 board. We get an address and two data
+ * bytes to write, create an i2c message, and send it across the
+ * i2c transfer function. We do this here because we have access to
+ * the i2c adapter structure.
+ */
+static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */
+static u8 i2cbuf[2];
+
+int
+pb1550_wm_codec_write(u8 addr, u8 reg, u8 val)
+{
+ wm_i2c_msg.addr = addr;
+ wm_i2c_msg.flags = 0;
+ wm_i2c_msg.buf = i2cbuf;
+ wm_i2c_msg.len = 2;
+ i2cbuf[0] = reg;
+ i2cbuf[1] = val;
+
+ return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1);
+}
+
+/* the next function is needed by DVB driver. */
+int pb1550_i2c_xfer(struct i2c_msg msgs[], int num)
+{
+ return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, msgs, num);
+}
+
+EXPORT_SYMBOL(pb1550_wm_codec_write);
+EXPORT_SYMBOL(pb1550_i2c_xfer);
+
+MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
+MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
+MODULE_LICENSE("GPL");
+
+int
+init_module(void)
+{
+ return i2c_pb1550_init();
+}
+
+void
+cleanup_module(void)
+{
+ i2c_au1550_del_bus(&pb1550_board_adapter);
+}
Index: linux-2.4.35.4/drivers/i2c/i2c-core.c
===================================================================
--- linux-2.4.35.4.orig/drivers/i2c/i2c-core.c
+++ linux-2.4.35.4/drivers/i2c/i2c-core.c
@@ -1277,6 +1277,9 @@ static int __init i2c_init(void)
#ifdef CONFIG_I2C_MAX1617
extern int i2c_max1617_init(void);
#endif
+#ifdef CONFIG_I2C_ALGO_AU1550
+ extern int i2c_pb1550_init(void);
+#endif
#ifdef CONFIG_I2C_PROC
extern int sensors_init(void);
@@ -1332,6 +1335,10 @@ int __init i2c_init_all(void)
i2c_max1617_init();
#endif
+#ifdef CONFIG_I2C_ALGO_AU1550
+ i2c_pb1550_init();
+#endif
+
/* -------------- proc interface ---- */
#ifdef CONFIG_I2C_PROC
sensors_init();
Index: linux-2.4.35.4/drivers/i2c/Makefile
===================================================================
--- linux-2.4.35.4.orig/drivers/i2c/Makefile
+++ linux-2.4.35.4/drivers/i2c/Makefile
@@ -6,7 +6,7 @@ O_TARGET := i2c.o
export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \
i2c-algo-ite.o i2c-algo-sibyte.o i2c-algo-sgi.o \
- i2c-proc.o
+ i2c-algo-au1550.o i2c-proc.o i2c-au1550.o
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
@@ -25,6 +25,7 @@ obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest
obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o i2c-sibyte.o
obj-$(CONFIG_I2C_MAX1617) += i2c-max1617.o
obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o
+obj-$(CONFIG_I2C_ALGO_AU1550) += i2c-algo-au1550.o i2c-au1550.o
# This is needed for automatic patch generation: sensors code starts here
# This is needed for automatic patch generation: sensors code ends here
Index: linux-2.4.35.4/drivers/media/video/indycam.c
===================================================================
--- linux-2.4.35.4.orig/drivers/media/video/indycam.c
+++ linux-2.4.35.4/drivers/media/video/indycam.c
@@ -50,13 +50,14 @@ static int indycam_attach(struct i2c_ada
0x80, /* INDYCAM_GAMMA */
};
- int err = 0;
struct indycam *camera;
struct i2c_client *client;
+ int err = 0;
client = kmalloc(sizeof(*client), GFP_KERNEL);
- if (!client)
+ if (!client)
return -ENOMEM;
+
camera = kmalloc(sizeof(*camera), GFP_KERNEL);
if (!camera) {
err = -ENOMEM;
@@ -67,7 +68,7 @@ static int indycam_attach(struct i2c_ada
client->adapter = adap;
client->addr = addr;
client->driver = &i2c_driver_indycam;
- strcpy(client->name, "IndyCam client");
+ strcpy(client->name, "IndyCam client");
camera->client = client;
err = i2c_attach_client(client);
@@ -75,18 +76,18 @@ static int indycam_attach(struct i2c_ada
goto out_free_camera;
camera->version = i2c_smbus_read_byte_data(client, INDYCAM_VERSION);
- if (camera->version != CAMERA_VERSION_INDY &&
- camera->version != CAMERA_VERSION_MOOSE) {
+ if ((camera->version != CAMERA_VERSION_INDY) &&
+ (camera->version != CAMERA_VERSION_MOOSE)) {
err = -ENODEV;
goto out_detach_client;
}
- printk(KERN_INFO "Indycam v%d.%d detected.\n",
+ printk(KERN_INFO "IndyCam v%d.%d detected.\n",
INDYCAM_VERSION_MAJOR(camera->version),
INDYCAM_VERSION_MINOR(camera->version));
err = i2c_master_send(client, initseq, sizeof(initseq));
if (err)
- printk(KERN_INFO "IndyCam initalization failed\n");
+ printk(KERN_ERR "IndyCam initalization failed.\n");
MOD_INC_USE_COUNT;
return 0;
Index: linux-2.4.35.4/drivers/media/video/vino.c
===================================================================
--- linux-2.4.35.4.orig/drivers/media/video/vino.c
+++ linux-2.4.35.4/drivers/media/video/vino.c
@@ -5,6 +5,8 @@
* License version 2 as published by the Free Software Foundation.
*
* Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
+ * Copyright (C) 2004 Mikael Nousiainen <tmnousia@cc.hut.fi>
+ *
*/
#include <linux/module.h>
@@ -37,13 +39,23 @@
#define DEBUG(x...)
#endif
+/* Channels (who could have guessed) */
+#define VINO_CHAN_NONE 0
+#define VINO_CHAN_A 1
+#define VINO_CHAN_B 2
+
/* VINO video size */
#define VINO_PAL_WIDTH 768
#define VINO_PAL_HEIGHT 576
#define VINO_NTSC_WIDTH 646
#define VINO_NTSC_HEIGHT 486
-/* set this to some sensible values. note: VINO_MIN_WIDTH has to be 8*x */
+/* Minimum value for Y-clipping (for smaller values the images
+ * will be corrupted) */
+#define VINO_MIN_Y_CLIPPING 2
+
+/* Set these to some sensible values.
+ * Note: the picture width has to be divisible by 8 */
#define VINO_MIN_WIDTH 32
#define VINO_MIN_HEIGHT 32
@@ -64,9 +76,7 @@ static int threshold_b = 512;
struct vino_device {
struct video_device vdev;
-#define VINO_CHAN_A 1
-#define VINO_CHAN_B 2
- int chan;
+ int chan; /* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */
int alpha;
/* clipping... */
unsigned int left, right, top, bottom;
@@ -106,7 +116,7 @@ struct vino_device {
struct vino_client {
struct i2c_client *driver;
- int owner;
+ int owner; /* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */
};
struct vino_video {
@@ -362,6 +372,7 @@ static int set_scaling(struct vino_devic
static int dma_setup(struct vino_device *v)
{
u32 ctrl, intr;
+ int ofs;
struct sgi_vino_channel *ch;
ch = (v->chan == VINO_CHAN_A) ? &vino->a : &vino->b;
@@ -377,14 +388,24 @@ static int dma_setup(struct vino_device
ch->line_size = v->line_size - 8;
/* set the alpha register */
ch->alpha = v->alpha;
- /* set cliping registers */
- ch->clip_start = VINO_CLIP_ODD(v->top) | VINO_CLIP_EVEN(v->top+1) |
+ /* Set the clipping registers, this is the constant source of fun :)
+ * Y clipping start has to be >= 2 and end has to be start + height/2
+ * The values of top and bottom are even so dividing is not a problem
+ *
+ * The docs say that clipping values for the even field should be
+ * odd_end + something_to_skip_vertical_blanking + some_lines and
+ * even_start + height/2, though the image is good this way also
+ *
+ * TODO: for analog sources (SAA7191), the clipping values are a bit
+ * different and that case isn't yet handled
+ */
+ ofs = VINO_MIN_Y_CLIPPING; /* Should depend on input source */
+ ch->clip_start = VINO_CLIP_ODD(ofs + v->top / 2) |
+ VINO_CLIP_EVEN(ofs + v->top / 2 + 1) |
VINO_CLIP_X(v->left);
- ch->clip_end = VINO_CLIP_ODD(v->bottom) | VINO_CLIP_EVEN(v->bottom+1) |
+ ch->clip_end = VINO_CLIP_ODD(ofs + v->bottom / 2 - 1) |
+ VINO_CLIP_EVEN(ofs + v->bottom / 2) |
VINO_CLIP_X(v->right);
- /* FIXME: end-of-field bug workaround
- VINO_CLIP_X(VINO_PAL_WIDTH);
- */
/* init the frame rate and norm (full frame rate only for now...) */
ch->frame_rate = VINO_FRAMERT_RT(0x1fff) |
(get_capture_norm(v) == VIDEO_MODE_PAL ?
@@ -510,6 +531,7 @@ static void field_done(struct vino_devic
static void vino_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
u32 intr, ctrl;
+ int a_eof, b_eof;
spin_lock(&Vino->vino_lock);
ctrl = vino->control;
@@ -525,12 +547,14 @@ static void vino_interrupt(int irq, void
vino->control = ctrl;
clear_eod(&Vino->chB);
}
+ a_eof = intr & VINO_INTSTAT_A_EOF;
+ b_eof = intr & VINO_INTSTAT_B_EOF;
vino->intr_status = ~intr;
spin_unlock(&Vino->vino_lock);
- /* FIXME: For now we are assuming that interrupt means that frame is
- * done. That's not true, but we can live with such brokeness for
- * a while ;-) */
- field_done(&Vino->chA);
+ if (a_eof)
+ field_done(&Vino->chA);
+ if (b_eof)
+ field_done(&Vino->chB);
}
static int vino_grab(struct vino_device *v, int frame)
Index: linux-2.4.35.4/drivers/mtd/devices/docprobe.c
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/devices/docprobe.c
+++ linux-2.4.35.4/drivers/mtd/devices/docprobe.c
@@ -89,10 +89,10 @@ static unsigned long __initdata doc_loca
0xe4000000,
#elif defined(CONFIG_MOMENCO_OCELOT)
0x2f000000,
- 0xff000000,
+ 0xff000000,
#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
- 0xff000000,
-##else
+ 0xff000000,
+#else
#warning Unknown architecture for DiskOnChip. No default probe locations defined
#endif
0 };
Index: linux-2.4.35.4/drivers/mtd/devices/ms02-nv.c
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/devices/ms02-nv.c
+++ linux-2.4.35.4/drivers/mtd/devices/ms02-nv.c
@@ -1,10 +1,10 @@
/*
- * Copyright (c) 2001 Maciej W. Rozycki
+ * Copyright (c) 2001 Maciej W. Rozycki
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
*
* $Id: ms02-nv.c,v 1.2 2003/01/24 14:05:17 dwmw2 Exp $
*/
@@ -29,18 +29,18 @@
static char version[] __initdata =
- "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n";
+ "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n";
-MODULE_AUTHOR("Maciej W. Rozycki <macro@ds2.pg.gda.pl>");
+MODULE_AUTHOR("Maciej W. Rozycki <macro@linux-mips.org>");
MODULE_DESCRIPTION("DEC MS02-NV NVRAM module driver");
MODULE_LICENSE("GPL");
/*
* Addresses we probe for an MS02-NV at. Modules may be located
- * at any 8MB boundary within a 0MB up to 112MB range or at any 32MB
- * boundary within a 0MB up to 448MB range. We don't support a module
- * at 0MB, though.
+ * at any 8MiB boundary within a 0MiB up to 112MiB range or at any 32MiB
+ * boundary within a 0MiB up to 448MiB range. We don't support a module
+ * at 0MiB, though.
*/
static ulong ms02nv_addrs[] __initdata = {
0x07000000, 0x06800000, 0x06000000, 0x05800000, 0x05000000,
@@ -130,7 +130,7 @@ static int __init ms02nv_init_one(ulong
int ret = -ENODEV;
- /* The module decodes 8MB of address space. */
+ /* The module decodes 8MiB of address space. */
mod_res = kmalloc(sizeof(*mod_res), GFP_KERNEL);
if (!mod_res)
return -ENOMEM;
@@ -233,7 +233,7 @@ static int __init ms02nv_init_one(ulong
goto err_out_csr_res;
}
- printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMB.\n",
+ printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n",
mtd->index, ms02nv_name, addr, size >> 20);
mp->next = root_ms02nv_mtd;
@@ -293,12 +293,12 @@ static int __init ms02nv_init(void)
switch (mips_machtype) {
case MACH_DS5000_200:
- csr = (volatile u32 *)KN02_CSR_ADDR;
+ csr = (volatile u32 *)KN02_CSR_BASE;
if (*csr & KN02_CSR_BNK32M)
stride = 2;
break;
case MACH_DS5000_2X0:
- case MACH_DS5000:
+ case MACH_DS5900:
csr = (volatile u32 *)KN03_MCR_BASE;
if (*csr & KN03_MCR_BNK32M)
stride = 2;
Index: linux-2.4.35.4/drivers/mtd/devices/ms02-nv.h
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/devices/ms02-nv.h
+++ linux-2.4.35.4/drivers/mtd/devices/ms02-nv.h
@@ -1,32 +1,96 @@
/*
- * Copyright (c) 2001 Maciej W. Rozycki
+ * Copyright (c) 2001, 2003 Maciej W. Rozycki
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for
+ * DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260
+ * systems.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * $Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $
*/
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
+/*
+ * Addresses are decoded as follows:
+ *
+ * 0x000000 - 0x3fffff SRAM
+ * 0x400000 - 0x7fffff CSR
+ *
+ * Within the SRAM area the following ranges are forced by the system
+ * firmware:
+ *
+ * 0x000000 - 0x0003ff diagnostic area, destroyed upon a reboot
+ * 0x000400 - ENDofRAM storage area, available to operating systems
+ *
+ * but we can't really use the available area right from 0x000400 as
+ * the first word is used by the firmware as a status flag passed
+ * from an operating system. If anything but the valid data magic
+ * ID value is found, the firmware considers the SRAM clean, i.e.
+ * containing no valid data, and disables the battery resulting in
+ * data being erased as soon as power is switched off. So the choice
+ * for the start address of the user-available is 0x001000 which is
+ * nicely page aligned. The area between 0x000404 and 0x000fff may
+ * be used by the driver for own needs.
+ *
+ * The diagnostic area defines two status words to be read by an
+ * operating system, a magic ID to distinguish a MS02-NV board from
+ * anything else and a status information providing results of tests
+ * as well as the size of SRAM available, which can be 1MiB or 2MiB
+ * (that's what the firmware handles; no idea if 2MiB modules ever
+ * existed).
+ *
+ * The firmware only handles the MS02-NV board if installed in the
+ * last (15th) slot, so for any other location the status information
+ * stored in the SRAM cannot be relied upon. But from the hardware
+ * point of view there is no problem using up to 14 such boards in a
+ * system -- only the 1st slot needs to be filled with a DRAM module.
+ * The MS02-NV board is ECC-protected, like other MS02 memory boards.
+ *
+ * The state of the battery as provided by the CSR is reflected on
+ * the two onboard LEDs. When facing the battery side of the board,
+ * with the LEDs at the top left and the battery at the bottom right
+ * (i.e. looking from the back side of the system box), their meaning
+ * is as follows (the system has to be powered on):
+ *
+ * left LED battery disable status: lit = enabled
+ * right LED battery condition status: lit = OK
+ */
+
/* MS02-NV iomem register offsets. */
#define MS02NV_CSR 0x400000 /* control & status register */
+/* MS02-NV CSR status bits. */
+#define MS02NV_CSR_BATT_OK 0x01 /* battery OK */
+#define MS02NV_CSR_BATT_OFF 0x02 /* battery disabled */
+
+
/* MS02-NV memory offsets. */
#define MS02NV_DIAG 0x0003f8 /* diagnostic status */
#define MS02NV_MAGIC 0x0003fc /* MS02-NV magic ID */
-#define MS02NV_RAM 0x000400 /* general-purpose RAM start */
+#define MS02NV_VALID 0x000400 /* valid data magic ID */
+#define MS02NV_RAM 0x001000 /* user-exposed RAM start */
-/* MS02-NV diagnostic status constants. */
-#define MS02NV_DIAG_SIZE_MASK 0xf0 /* RAM size mask */
-#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* RAM size shift (left) */
+/* MS02-NV diagnostic status bits. */
+#define MS02NV_DIAG_TEST 0x01 /* SRAM test done (?) */
+#define MS02NV_DIAG_RO 0x02 /* SRAM r/o test done */
+#define MS02NV_DIAG_RW 0x04 /* SRAM r/w test done */
+#define MS02NV_DIAG_FAIL 0x08 /* SRAM test failed */
+#define MS02NV_DIAG_SIZE_MASK 0xf0 /* SRAM size mask */
+#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* SRAM size shift (left) */
/* MS02-NV general constants. */
#define MS02NV_ID 0x03021966 /* MS02-NV magic ID value */
+#define MS02NV_VALID_ID 0xbd100248 /* valid data magic ID value */
#define MS02NV_SLOT_SIZE 0x800000 /* size of the address space
decoded by the module */
+
typedef volatile u32 ms02nv_uint;
struct ms02nv_private {
Index: linux-2.4.35.4/drivers/mtd/maps/Config.in
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/maps/Config.in
+++ linux-2.4.35.4/drivers/mtd/maps/Config.in
@@ -51,11 +51,26 @@ if [ "$CONFIG_MIPS" = "y" ]; then
dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000
dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500
dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100
+ dep_tristate ' Bosporus MTD support' CONFIG_MTD_BOSPORUS $CONFIG_MIPS_BOSPORUS
+ dep_tristate ' XXS1500 boot flash device' CONFIG_MTD_XXS1500 $CONFIG_MIPS_XXS1500
+ dep_tristate ' MTX-1 flash device' CONFIG_MTD_MTX1 $CONFIG_MIPS_MTX1
if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" \
-o "$CONFIG_MTD_PB1100" = "y" -o "$CONFIG_MTD_PB1100" = "m" ]; then
bool ' Pb[15]00 boot flash device' CONFIG_MTD_PB1500_BOOT
bool ' Pb[15]00 user flash device (2nd 32MiB bank)' CONFIG_MTD_PB1500_USER
fi
+ tristate ' Db1x00 MTD support' CONFIG_MTD_DB1X00
+ if [ "$CONFIG_MTD_DB1X00" = "y" -o "$CONFIG_MTD_DB1X00" = "m" ]; then
+ bool ' Db1x00 boot flash device' CONFIG_MTD_DB1X00_BOOT
+ bool ' Db1x00 user flash device (2nd bank)' CONFIG_MTD_DB1X00_USER
+ fi
+ tristate ' Pb1550 MTD support' CONFIG_MTD_PB1550
+ if [ "$CONFIG_MTD_PB1550" = "y" -o "$CONFIG_MTD_PB1550" = "m" ]; then
+ bool ' Pb1550 Boot Flash' CONFIG_MTD_PB1550_BOOT
+ bool ' Pb1550 User Parameter Flash' CONFIG_MTD_PB1550_USER
+ fi
+ dep_tristate ' Hydrogen 3 MTD support' CONFIG_MTD_HYDROGEN3 $CONFIG_MIPS_HYDROGEN3
+ dep_tristate ' Mirage MTD support' CONFIG_MTD_MIRAGE $CONFIG_MIPS_MIRAGE
dep_tristate ' Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS
if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then
hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000
Index: linux-2.4.35.4/drivers/mtd/maps/db1x00-flash.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/mtd/maps/db1x00-flash.c
@@ -0,0 +1,283 @@
+/*
+ * Flash memory access on Alchemy Db1xxx boards
+ *
+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+#include <asm/db1x00.h>
+
+#ifdef DEBUG_RW
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static unsigned long window_addr;
+static unsigned long window_size;
+static unsigned long flash_size;
+
+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
+{
+ __u8 ret;
+ ret = __raw_readb(map->map_priv_1 + ofs);
+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
+{
+ __u16 ret;
+ ret = __raw_readw(map->map_priv_1 + ofs);
+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
+{
+ __u32 ret;
+ ret = __raw_readl(map->map_priv_1 + ofs);
+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
+ memcpy_fromio(to, map->map_priv_1 + from, len);
+}
+
+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writeb(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writew(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writel(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
+ memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+static struct map_info db1x00_map = {
+ name: "Db1x00 flash",
+ read8: physmap_read8,
+ read16: physmap_read16,
+ read32: physmap_read32,
+ copy_from: physmap_copy_from,
+ write8: physmap_write8,
+ write16: physmap_write16,
+ write32: physmap_write32,
+ copy_to: physmap_copy_to,
+};
+
+static unsigned char flash_buswidth = 4;
+
+/*
+ * The Db1x boards support different flash densities. We setup
+ * the mtd_partition structures below for default of 64Mbit
+ * flash densities, and override the partitions sizes, if
+ * necessary, after we check the board status register.
+ */
+
+#ifdef DB1X00_BOTH_BANKS
+/* both banks will be used. Combine the first bank and the first
+ * part of the second bank together into a single jffs/jffs2
+ * partition.
+ */
+static struct mtd_partition db1x00_partitions[] = {
+ {
+ name: "User FS",
+ size: 0x1c00000,
+ offset: 0x0000000
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: (0x300000-0x40000), /* last 256KB is yamon env */
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+#elif defined(DB1X00_BOOT_ONLY)
+static struct mtd_partition db1x00_partitions[] = {
+ {
+ name: "User FS",
+ size: 0x00c00000,
+ offset: 0x0000000
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: (0x300000-0x40000), /* last 256KB is yamon env */
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+#elif defined(DB1X00_USER_ONLY)
+static struct mtd_partition db1x00_partitions[] = {
+ {
+ name: "User FS",
+ size: 0x0e00000,
+ offset: 0x0000000
+ },{
+ name: "raw kernel",
+ size: MTDPART_SIZ_FULL,
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+#else
+#error MTD_DB1X00 define combo error /* should never happen */
+#endif
+
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+/*
+ * Probe the flash density and setup window address and size
+ * based on user CONFIG options. There are times when we don't
+ * want the MTD driver to be probing the boot or user flash,
+ * so having the option to enable only one bank is important.
+ */
+int setup_flash_params()
+{
+ switch ((bcsr->status >> 14) & 0x3) {
+ case 0: /* 64Mbit devices */
+ flash_size = 0x800000; /* 8MB per part */
+#if defined(DB1X00_BOTH_BANKS)
+ window_addr = 0x1E000000;
+ window_size = 0x2000000;
+#elif defined(DB1X00_BOOT_ONLY)
+ window_addr = 0x1F000000;
+ window_size = 0x1000000;
+#else /* USER ONLY */
+ window_addr = 0x1E000000;
+ window_size = 0x1000000;
+#endif
+ break;
+ case 1:
+ /* 128 Mbit devices */
+ flash_size = 0x1000000; /* 16MB per part */
+#if defined(DB1X00_BOTH_BANKS)
+ window_addr = 0x1C000000;
+ window_size = 0x4000000;
+ /* USERFS from 0x1C00 0000 to 0x1FC0 0000 */
+ db1x00_partitions[0].size = 0x3C00000;
+#elif defined(DB1X00_BOOT_ONLY)
+ window_addr = 0x1E000000;
+ window_size = 0x2000000;
+ /* USERFS from 0x1E00 0000 to 0x1FC0 0000 */
+ db1x00_partitions[0].size = 0x1C00000;
+#else /* USER ONLY */
+ window_addr = 0x1C000000;
+ window_size = 0x2000000;
+ /* USERFS from 0x1C00 0000 to 0x1DE00000 */
+ db1x00_partitions[0].size = 0x1DE0000;
+#endif
+ break;
+ case 2:
+ /* 256 Mbit devices */
+ flash_size = 0x4000000; /* 64MB per part */
+#if defined(DB1X00_BOTH_BANKS)
+ return 1;
+#elif defined(DB1X00_BOOT_ONLY)
+ /* Boot ROM flash bank only; no user bank */
+ window_addr = 0x1C000000;
+ window_size = 0x4000000;
+ /* USERFS from 0x1C00 0000 to 0x1FC00000 */
+ db1x00_partitions[0].size = 0x3C00000;
+#else /* USER ONLY */
+ return 1;
+#endif
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+int __init db1x00_mtd_init(void)
+{
+ struct mtd_partition *parts;
+ int nb_parts = 0;
+ char *part_type;
+
+ /* Default flash buswidth */
+ db1x00_map.buswidth = flash_buswidth;
+
+ if (setup_flash_params())
+ return -ENXIO;
+
+ /*
+ * Static partition definition selection
+ */
+ part_type = "static";
+ parts = db1x00_partitions;
+ nb_parts = NB_OF(db1x00_partitions);
+ db1x00_map.size = window_size;
+
+ /*
+ * Now let's probe for the actual flash. Do it here since
+ * specific machine settings might have been set above.
+ */
+ printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n",
+ db1x00_map.buswidth*8);
+ db1x00_map.map_priv_1 =
+ (unsigned long)ioremap(window_addr, window_size);
+ mymtd = do_map_probe("cfi_probe", &db1x00_map);
+ if (!mymtd) return -ENXIO;
+ mymtd->module = THIS_MODULE;
+
+ add_mtd_partitions(mymtd, parts, nb_parts);
+ return 0;
+}
+
+static void __exit db1x00_mtd_cleanup(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ if (parsed_parts)
+ kfree(parsed_parts);
+ }
+}
+
+module_init(db1x00_mtd_init);
+module_exit(db1x00_mtd_cleanup);
+
+MODULE_AUTHOR("Pete Popov");
+MODULE_DESCRIPTION("Db1x00 mtd map driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/mtd/maps/hydrogen3-flash.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/mtd/maps/hydrogen3-flash.c
@@ -0,0 +1,189 @@
+/*
+ * Flash memory access on Alchemy HydrogenIII boards
+ *
+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+
+#ifdef DEBUG_RW
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define WINDOW_ADDR 0x1E000000
+#define WINDOW_SIZE 0x02000000
+
+
+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
+{
+ __u8 ret;
+ ret = __raw_readb(map->map_priv_1 + ofs);
+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
+{
+ __u16 ret;
+ ret = __raw_readw(map->map_priv_1 + ofs);
+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
+{
+ __u32 ret;
+ ret = __raw_readl(map->map_priv_1 + ofs);
+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
+ memcpy_fromio(to, map->map_priv_1 + from, len);
+}
+
+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writeb(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writew(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writel(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
+ memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+static struct map_info hydrogen3_map = {
+ name: "HydrogenIII flash",
+ read8: physmap_read8,
+ read16: physmap_read16,
+ read32: physmap_read32,
+ copy_from: physmap_copy_from,
+ write8: physmap_write8,
+ write16: physmap_write16,
+ write32: physmap_write32,
+ copy_to: physmap_copy_to,
+};
+
+static unsigned char flash_buswidth = 4;
+
+/* MTDPART_OFS_APPEND is vastly preferred to any attempt at statically lining
+ * up the offsets. */
+static struct mtd_partition hydrogen3_partitions[] = {
+ {
+ name: "User FS",
+ size: 0x1c00000,
+ offset: 0x0000000
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: 0x02c0000,
+ offset: MTDPART_OFS_APPEND
+ }
+};
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+int __init hydrogen3_mtd_init(void)
+{
+ struct mtd_partition *parts;
+ int nb_parts = 0;
+ char *part_type;
+
+ /* Default flash buswidth */
+ hydrogen3_map.buswidth = flash_buswidth;
+
+ /*
+ * Static partition definition selection
+ */
+ part_type = "static";
+ parts = hydrogen3_partitions;
+ nb_parts = NB_OF(hydrogen3_partitions);
+ hydrogen3_map.size = WINDOW_SIZE;
+
+ /*
+ * Now let's probe for the actual flash. Do it here since
+ * specific machine settings might have been set above.
+ */
+ printk(KERN_NOTICE "HydrogenIII flash: probing %d-bit flash bus\n",
+ hydrogen3_map.buswidth*8);
+ hydrogen3_map.map_priv_1 =
+ (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
+ mymtd = do_map_probe("cfi_probe", &hydrogen3_map);
+ if (!mymtd) return -ENXIO;
+ mymtd->module = THIS_MODULE;
+
+ add_mtd_partitions(mymtd, parts, nb_parts);
+ return 0;
+}
+
+static void __exit hydrogen3_mtd_cleanup(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ if (parsed_parts)
+ kfree(parsed_parts);
+ }
+}
+
+/*#ifndef MODULE
+
+static int __init _bootflashonly(char *str)
+{
+ bootflashonly = simple_strtol(str, NULL, 0);
+ return 1;
+}
+
+
+__setup("bootflashonly=", _bootflashonly);
+
+#endif*/
+
+
+module_init(hydrogen3_mtd_init);
+module_exit(hydrogen3_mtd_cleanup);
+
+MODULE_PARM(bootflashonly, "i");
+MODULE_PARM_DESC(bootflashonly, "1=use \"boot flash only\"");
+MODULE_AUTHOR("Pete Popov");
+MODULE_DESCRIPTION("HydrogenIII mtd map driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/mtd/maps/lasat.c
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/maps/lasat.c
+++ linux-2.4.35.4/drivers/mtd/maps/lasat.c
@@ -1,15 +1,6 @@
/*
* Flash device on lasat 100 and 200 boards
*
- * Presumably (C) 2002 Brian Murphy <brian@murphy.dk> or whoever he
- * works for.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * $Id: lasat.c,v 1.1 2003/01/24 14:26:38 dwmw2 Exp $
- *
*/
#include <linux/module.h>
@@ -21,7 +12,6 @@
#include <linux/mtd/partitions.h>
#include <linux/config.h>
#include <asm/lasat/lasat.h>
-#include <asm/lasat/lasat_mtd.h>
static struct mtd_info *mymtd;
@@ -69,30 +59,33 @@ static void sp_copy_to(struct map_info *
}
static struct map_info sp_map = {
- .name = "SP flash",
- .buswidth = 4,
- .read8 = sp_read8,
- .read16 = sp_read16,
- .read32 = sp_read32,
- .copy_from = sp_copy_from,
- .write8 = sp_write8,
- .write16 = sp_write16,
- .write32 = sp_write32,
- .copy_to = sp_copy_to
+ name: "SP flash",
+ buswidth: 4,
+ read8: sp_read8,
+ read16: sp_read16,
+ read32: sp_read32,
+ copy_from: sp_copy_from,
+ write8: sp_write8,
+ write16: sp_write16,
+ write32: sp_write32,
+ copy_to: sp_copy_to
};
static struct mtd_partition partition_info[LASAT_MTD_LAST];
-static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Filesystem", "Config"};
+static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Config", "Filesystem"};
static int __init init_sp(void)
{
int i;
+ int nparts = 0;
/* this does not play well with the old flash code which
* protects and uprotects the flash when necessary */
printk(KERN_NOTICE "Unprotecting flash\n");
*lasat_misc->flash_wp_reg |= 1 << lasat_misc->flash_wp_bit;
- sp_map.map_priv_1 = lasat_flash_partition_start(LASAT_MTD_BOOTLOADER);
+ sp_map.map_priv_1 = ioremap_nocache(
+ lasat_flash_partition_start(LASAT_MTD_BOOTLOADER),
+ lasat_board_info.li_flash_size);
sp_map.size = lasat_board_info.li_flash_size;
printk(KERN_NOTICE "sp flash device: %lx at %lx\n",
@@ -109,12 +102,15 @@ static int __init init_sp(void)
for (i=0; i < LASAT_MTD_LAST; i++) {
size = lasat_flash_partition_size(i);
- partition_info[i].size = size;
- partition_info[i].offset = offset;
- offset += size;
+ if (size != 0) {
+ nparts++;
+ partition_info[i].size = size;
+ partition_info[i].offset = offset;
+ offset += size;
+ }
}
- add_mtd_partitions( mymtd, partition_info, LASAT_MTD_LAST );
+ add_mtd_partitions( mymtd, partition_info, nparts );
return 0;
}
@@ -124,11 +120,11 @@ static int __init init_sp(void)
static void __exit cleanup_sp(void)
{
if (mymtd) {
- del_mtd_partitions(mymtd);
- map_destroy(mymtd);
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
}
if (sp_map.map_priv_1) {
- sp_map.map_priv_1 = 0;
+ sp_map.map_priv_1 = 0;
}
}
Index: linux-2.4.35.4/drivers/mtd/maps/Makefile
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/maps/Makefile
+++ linux-2.4.35.4/drivers/mtd/maps/Makefile
@@ -52,7 +52,13 @@ obj-$(CONFIG_MTD_PCI) += pci.o
obj-$(CONFIG_MTD_PB1000) += pb1xxx-flash.o
obj-$(CONFIG_MTD_PB1100) += pb1xxx-flash.o
obj-$(CONFIG_MTD_PB1500) += pb1xxx-flash.o
+obj-$(CONFIG_MTD_XXS1500) += xxs1500.o
+obj-$(CONFIG_MTD_MTX1) += mtx-1.o
obj-$(CONFIG_MTD_LASAT) += lasat.o
+obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o
+obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o
+obj-$(CONFIG_MTD_HYDROGEN3) += hydrogen3-flash.o
+obj-$(CONFIG_MTD_BOSPORUS) += pb1xxx-flash.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
@@ -61,5 +67,6 @@ obj-$(CONFIG_MTD_REDWOOD) += redwood.o
obj-$(CONFIG_MTD_UCLINUX) += uclinux.o
obj-$(CONFIG_MTD_NETtel) += nettel.o
obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
+obj-$(CONFIG_MTD_MIRAGE) += mirage-flash.o
include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/drivers/mtd/maps/mirage-flash.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/mtd/maps/mirage-flash.c
@@ -0,0 +1,194 @@
+/*
+ * Flash memory access on AMD Mirage board.
+ *
+ * (C) 2003 Embedded Edge
+ * based on mirage-flash.c:
+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+//#include <asm/mirage.h>
+
+#ifdef DEBUG_RW
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static unsigned long window_addr;
+static unsigned long window_size;
+static unsigned long flash_size;
+
+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
+{
+ __u8 ret;
+ ret = __raw_readb(map->map_priv_1 + ofs);
+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
+{
+ __u16 ret;
+ ret = __raw_readw(map->map_priv_1 + ofs);
+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
+{
+ __u32 ret;
+ ret = __raw_readl(map->map_priv_1 + ofs);
+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
+ memcpy_fromio(to, map->map_priv_1 + from, len);
+}
+
+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writeb(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writew(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writel(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
+ memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+static struct map_info mirage_map = {
+ name: "Mirage flash",
+ read8: physmap_read8,
+ read16: physmap_read16,
+ read32: physmap_read32,
+ copy_from: physmap_copy_from,
+ write8: physmap_write8,
+ write16: physmap_write16,
+ write32: physmap_write32,
+ copy_to: physmap_copy_to,
+};
+
+static unsigned char flash_buswidth = 4;
+
+static struct mtd_partition mirage_partitions[] = {
+ {
+ name: "User FS",
+ size: 0x1c00000,
+ offset: 0x0000000
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: (0x300000-0x40000), /* last 256KB is yamon env */
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+/*
+ * Probe the flash density and setup window address and size
+ * based on user CONFIG options. There are times when we don't
+ * want the MTD driver to be probing the boot or user flash,
+ * so having the option to enable only one bank is important.
+ */
+int setup_flash_params()
+{
+ flash_size = 0x4000000; /* 64MB per part */
+ /* Boot ROM flash bank only; no user bank */
+ window_addr = 0x1C000000;
+ window_size = 0x4000000;
+ /* USERFS from 0x1C00 0000 to 0x1FC00000 */
+ mirage_partitions[0].size = 0x3C00000;
+ return 0;
+}
+
+int __init mirage_mtd_init(void)
+{
+ struct mtd_partition *parts;
+ int nb_parts = 0;
+ char *part_type;
+
+ /* Default flash buswidth */
+ mirage_map.buswidth = flash_buswidth;
+
+ if (setup_flash_params())
+ return -ENXIO;
+
+ /*
+ * Static partition definition selection
+ */
+ part_type = "static";
+ parts = mirage_partitions;
+ nb_parts = NB_OF(mirage_partitions);
+ mirage_map.size = window_size;
+
+ /*
+ * Now let's probe for the actual flash. Do it here since
+ * specific machine settings might have been set above.
+ */
+ printk(KERN_NOTICE "Mirage flash: probing %d-bit flash bus\n",
+ mirage_map.buswidth*8);
+ mirage_map.map_priv_1 =
+ (unsigned long)ioremap(window_addr, window_size);
+ mymtd = do_map_probe("cfi_probe", &mirage_map);
+ if (!mymtd) return -ENXIO;
+ mymtd->module = THIS_MODULE;
+
+ add_mtd_partitions(mymtd, parts, nb_parts);
+ return 0;
+}
+
+static void __exit mirage_mtd_cleanup(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ if (parsed_parts)
+ kfree(parsed_parts);
+ }
+}
+
+module_init(mirage_mtd_init);
+module_exit(mirage_mtd_cleanup);
+
+MODULE_AUTHOR("Embedded Edge");
+MODULE_DESCRIPTION("Mirage mtd map driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/mtd/maps/mtx-1.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/mtd/maps/mtx-1.c
@@ -0,0 +1,181 @@
+/*
+ * Flash memory access on 4G Systems MTX-1 board
+ *
+ * (C) 2003 Pete Popov <ppopov@mvista.com>
+ * Bruno Randolf <bruno.randolf@4g-systems.de>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+
+#ifdef DEBUG_RW
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#ifdef CONFIG_MIPS_MTX1
+#define WINDOW_ADDR 0x1E000000
+#define WINDOW_SIZE 0x2000000
+#endif
+
+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
+{
+ __u8 ret;
+ ret = __raw_readb(map->map_priv_1 + ofs);
+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
+{
+ __u16 ret;
+ ret = __raw_readw(map->map_priv_1 + ofs);
+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
+{
+ __u32 ret;
+ ret = __raw_readl(map->map_priv_1 + ofs);
+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
+ memcpy_fromio(to, map->map_priv_1 + from, len);
+}
+
+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writeb(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writew(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writel(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
+ memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+
+
+static struct map_info mtx1_map = {
+ name: "MTX-1 flash",
+ read8: physmap_read8,
+ read16: physmap_read16,
+ read32: physmap_read32,
+ copy_from: physmap_copy_from,
+ write8: physmap_write8,
+ write16: physmap_write16,
+ write32: physmap_write32,
+ copy_to: physmap_copy_to,
+};
+
+
+static unsigned long flash_size = 0x01000000;
+static unsigned char flash_buswidth = 4;
+static struct mtd_partition mtx1_partitions[] = {
+ {
+ name: "user fs",
+ size: 0x1c00000,
+ offset: 0,
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: 0x02c0000,
+ offset: MTDPART_OFS_APPEND,
+ },{
+ name: "yamon env vars",
+ size: 0x0040000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ }
+};
+
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+int __init mtx1_mtd_init(void)
+{
+ struct mtd_partition *parts;
+ int nb_parts = 0;
+ char *part_type;
+
+ /* Default flash buswidth */
+ mtx1_map.buswidth = flash_buswidth;
+
+ /*
+ * Static partition definition selection
+ */
+ part_type = "static";
+ parts = mtx1_partitions;
+ nb_parts = NB_OF(mtx1_partitions);
+ mtx1_map.size = flash_size;
+
+ /*
+ * Now let's probe for the actual flash. Do it here since
+ * specific machine settings might have been set above.
+ */
+ printk(KERN_NOTICE "MTX-1 flash: probing %d-bit flash bus\n",
+ mtx1_map.buswidth*8);
+ mtx1_map.map_priv_1 =
+ (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
+ mymtd = do_map_probe("cfi_probe", &mtx1_map);
+ if (!mymtd) return -ENXIO;
+ mymtd->module = THIS_MODULE;
+
+ add_mtd_partitions(mymtd, parts, nb_parts);
+ return 0;
+}
+
+static void __exit mtx1_mtd_cleanup(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ if (parsed_parts)
+ kfree(parsed_parts);
+ }
+}
+
+module_init(mtx1_mtd_init);
+module_exit(mtx1_mtd_cleanup);
+
+MODULE_AUTHOR("Pete Popov");
+MODULE_DESCRIPTION("MTX-1 CFI map driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/mtd/maps/pb1550-flash.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/mtd/maps/pb1550-flash.c
@@ -0,0 +1,270 @@
+/*
+ * Flash memory access on Alchemy Pb1550 board
+ *
+ * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c:
+ * (C) 2003 Pete Popov <ppopov@pacbell.net>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+#include <asm/pb1550.h>
+
+#ifdef DEBUG_RW
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static unsigned long window_addr;
+static unsigned long window_size;
+
+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
+{
+ __u8 ret;
+ ret = __raw_readb(map->map_priv_1 + ofs);
+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
+{
+ __u16 ret;
+ ret = __raw_readw(map->map_priv_1 + ofs);
+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
+{
+ __u32 ret;
+ ret = __raw_readl(map->map_priv_1 + ofs);
+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
+ memcpy_fromio(to, map->map_priv_1 + from, len);
+}
+
+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writeb(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writew(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writel(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
+ memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+static struct map_info pb1550_map = {
+ name: "Pb1550 flash",
+ read8: physmap_read8,
+ read16: physmap_read16,
+ read32: physmap_read32,
+ copy_from: physmap_copy_from,
+ write8: physmap_write8,
+ write16: physmap_write16,
+ write32: physmap_write32,
+ copy_to: physmap_copy_to,
+};
+
+static unsigned char flash_buswidth = 4;
+
+/*
+ * Support only 64MB NOR Flash parts
+ */
+
+#ifdef PB1550_BOTH_BANKS
+/* both banks will be used. Combine the first bank and the first
+ * part of the second bank together into a single jffs/jffs2
+ * partition.
+ */
+static struct mtd_partition pb1550_partitions[] = {
+ /* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+ * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
+ * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
+ */
+ {
+ name: "User FS",
+ size: (0x1FC00000 - 0x18000000),
+ offset: 0x0000000
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: (0x300000 - 0x40000), /* last 256KB is yamon env */
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+#elif defined(PB1550_BOOT_ONLY)
+static struct mtd_partition pb1550_partitions[] = {
+ /* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+ * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash
+ */
+ {
+ name: "User FS",
+ size: 0x03c00000,
+ offset: 0x0000000
+ },{
+ name: "yamon",
+ size: 0x0100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "raw kernel",
+ size: (0x300000-0x40000), /* last 256KB is yamon env */
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+#elif defined(PB1550_USER_ONLY)
+static struct mtd_partition pb1550_partitions[] = {
+ /* assume boot[2:0]:swap is '0000' or '1000', which translates to:
+ * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash
+ */
+ {
+ name: "User FS",
+ size: (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */
+ offset: 0x0000000
+ },{
+ name: "raw kernel",
+ size: MTDPART_SIZ_FULL,
+ offset: MTDPART_OFS_APPEND,
+ }
+};
+#else
+#error MTD_PB1550 define combo error /* should never happen */
+#endif
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+/*
+ * Probe the flash density and setup window address and size
+ * based on user CONFIG options. There are times when we don't
+ * want the MTD driver to be probing the boot or user flash,
+ * so having the option to enable only one bank is important.
+ */
+int setup_flash_params()
+{
+ u16 boot_swapboot;
+ boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) |
+ ((bcsr->status >> 6) & 0x1);
+ printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot);
+
+ switch (boot_swapboot) {
+ case 0: /* 512Mbit devices, both enabled */
+ case 1:
+ case 8:
+ case 9:
+#if defined(PB1550_BOTH_BANKS)
+ window_addr = 0x18000000;
+ window_size = 0x8000000;
+#elif defined(PB1550_BOOT_ONLY)
+ window_addr = 0x1C000000;
+ window_size = 0x4000000;
+#else /* USER ONLY */
+ window_addr = 0x1E000000;
+ window_size = 0x1000000;
+#endif
+ break;
+ case 0xC:
+ case 0xD:
+ case 0xE:
+ case 0xF:
+ /* 64 MB Boot NOR Flash is disabled */
+ /* and the start address is moved to 0x0C00000 */
+ window_addr = 0x0C000000;
+ window_size = 0x4000000;
+ default:
+ printk("Pb1550 MTD: unsupported boot:swap setting\n");
+ return 1;
+ }
+ return 0;
+}
+
+int __init pb1550_mtd_init(void)
+{
+ struct mtd_partition *parts;
+ int nb_parts = 0;
+ char *part_type;
+
+ /* Default flash buswidth */
+ pb1550_map.buswidth = flash_buswidth;
+
+ if (setup_flash_params())
+ return -ENXIO;
+
+ /*
+ * Static partition definition selection
+ */
+ part_type = "static";
+ parts = pb1550_partitions;
+ nb_parts = NB_OF(pb1550_partitions);
+ pb1550_map.size = window_size;
+
+ /*
+ * Now let's probe for the actual flash. Do it here since
+ * specific machine settings might have been set above.
+ */
+ printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n",
+ pb1550_map.buswidth*8);
+ pb1550_map.map_priv_1 =
+ (unsigned long)ioremap(window_addr, window_size);
+ mymtd = do_map_probe("cfi_probe", &pb1550_map);
+ if (!mymtd) return -ENXIO;
+ mymtd->module = THIS_MODULE;
+
+ add_mtd_partitions(mymtd, parts, nb_parts);
+ return 0;
+}
+
+static void __exit pb1550_mtd_cleanup(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ if (parsed_parts)
+ kfree(parsed_parts);
+ }
+}
+
+module_init(pb1550_mtd_init);
+module_exit(pb1550_mtd_cleanup);
+
+MODULE_AUTHOR("Embedded Edge, LLC");
+MODULE_DESCRIPTION("Pb1550 mtd map driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/mtd/maps/pb1xxx-flash.c
===================================================================
--- linux-2.4.35.4.orig/drivers/mtd/maps/pb1xxx-flash.c
+++ linux-2.4.35.4/drivers/mtd/maps/pb1xxx-flash.c
@@ -192,6 +192,34 @@ static struct mtd_partition pb1xxx_parti
#else
#error MTD_PB1500 define combo error /* should never happen */
#endif
+#elif defined(CONFIG_MTD_BOSPORUS)
+static unsigned char flash_buswidth = 2;
+static unsigned long flash_size = 0x02000000;
+#define WINDOW_ADDR 0x1F000000
+#define WINDOW_SIZE 0x2000000
+static struct mtd_partition pb1xxx_partitions[] = {
+ {
+ name: "User FS",
+ size: 0x00400000,
+ offset: 0x00000000,
+ },{
+ name: "Yamon-2",
+ size: 0x00100000,
+ offset: 0x00400000,
+ },{
+ name: "Root FS",
+ size: 0x00700000,
+ offset: 0x00500000,
+ },{
+ name: "Yamon-1",
+ size: 0x00100000,
+ offset: 0x00C00000,
+ },{
+ name: "Kernel",
+ size: 0x00300000,
+ offset: 0x00D00000,
+ }
+};
#else
#error Unsupported board
#endif
Index: linux-2.4.35.4/drivers/mtd/maps/xxs1500.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/mtd/maps/xxs1500.c
@@ -0,0 +1,186 @@
+/*
+ * Flash memory access on MyCable XXS1500 board
+ *
+ * (C) 2003 Pete Popov <ppopov@mvista.com>
+ *
+ * $Id: xxs1500.c,v 1.1.2.1 2003/06/13 21:15:46 ppopov Exp $
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/au1000.h>
+
+#ifdef DEBUG_RW
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#ifdef CONFIG_MIPS_XXS1500
+#define WINDOW_ADDR 0x1F000000
+#define WINDOW_SIZE 0x1000000
+#endif
+
+__u8 physmap_read8(struct map_info *map, unsigned long ofs)
+{
+ __u8 ret;
+ ret = __raw_readb(map->map_priv_1 + ofs);
+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u16 physmap_read16(struct map_info *map, unsigned long ofs)
+{
+ __u16 ret;
+ ret = __raw_readw(map->map_priv_1 + ofs);
+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+__u32 physmap_read32(struct map_info *map, unsigned long ofs)
+{
+ __u32 ret;
+ ret = __raw_readl(map->map_priv_1 + ofs);
+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret);
+ return ret;
+}
+
+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to);
+ memcpy_fromio(to, map->map_priv_1 + from, len);
+}
+
+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr)
+{
+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writeb(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr)
+{
+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writew(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr)
+{
+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d);
+ __raw_writel(d, map->map_priv_1 + adr);
+ mb();
+}
+
+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from);
+ memcpy_toio(map->map_priv_1 + to, from, len);
+}
+
+
+
+static struct map_info xxs1500_map = {
+ name: "XXS1500 flash",
+ read8: physmap_read8,
+ read16: physmap_read16,
+ read32: physmap_read32,
+ copy_from: physmap_copy_from,
+ write8: physmap_write8,
+ write16: physmap_write16,
+ write32: physmap_write32,
+ copy_to: physmap_copy_to,
+};
+
+
+static unsigned long flash_size = 0x00800000;
+static unsigned char flash_buswidth = 4;
+static struct mtd_partition xxs1500_partitions[] = {
+ {
+ name: "kernel image",
+ size: 0x00200000,
+ offset: 0,
+ },{
+ name: "user fs 0",
+ size: (0x00C00000-0x200000),
+ offset: MTDPART_OFS_APPEND,
+ },{
+ name: "yamon",
+ size: 0x00100000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ },{
+ name: "user fs 1",
+ size: 0x2c0000,
+ offset: MTDPART_OFS_APPEND,
+ },{
+ name: "yamon env vars",
+ size: 0x040000,
+ offset: MTDPART_OFS_APPEND,
+ mask_flags: MTD_WRITEABLE
+ }
+};
+
+
+#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
+
+static struct mtd_partition *parsed_parts;
+static struct mtd_info *mymtd;
+
+int __init xxs1500_mtd_init(void)
+{
+ struct mtd_partition *parts;
+ int nb_parts = 0;
+ char *part_type;
+
+ /* Default flash buswidth */
+ xxs1500_map.buswidth = flash_buswidth;
+
+ /*
+ * Static partition definition selection
+ */
+ part_type = "static";
+ parts = xxs1500_partitions;
+ nb_parts = NB_OF(xxs1500_partitions);
+ xxs1500_map.size = flash_size;
+
+ /*
+ * Now let's probe for the actual flash. Do it here since
+ * specific machine settings might have been set above.
+ */
+ printk(KERN_NOTICE "XXS1500 flash: probing %d-bit flash bus\n",
+ xxs1500_map.buswidth*8);
+ xxs1500_map.map_priv_1 =
+ (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
+ mymtd = do_map_probe("cfi_probe", &xxs1500_map);
+ if (!mymtd) return -ENXIO;
+ mymtd->module = THIS_MODULE;
+
+ add_mtd_partitions(mymtd, parts, nb_parts);
+ return 0;
+}
+
+static void __exit xxs1500_mtd_cleanup(void)
+{
+ if (mymtd) {
+ del_mtd_partitions(mymtd);
+ map_destroy(mymtd);
+ if (parsed_parts)
+ kfree(parsed_parts);
+ }
+}
+
+module_init(xxs1500_mtd_init);
+module_exit(xxs1500_mtd_cleanup);
+
+MODULE_AUTHOR("Pete Popov");
+MODULE_DESCRIPTION("XXS1500 CFI map driver");
+MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/net/defxx.c
===================================================================
--- linux-2.4.35.4.orig/drivers/net/defxx.c
+++ linux-2.4.35.4/drivers/net/defxx.c
@@ -10,24 +10,18 @@
*
* Abstract:
* A Linux device driver supporting the Digital Equipment Corporation
- * FDDI EISA and PCI controller families. Supported adapters include:
+ * FDDI TURBOchannel, EISA and PCI controller families. Supported
+ * adapters include:
*
- * DEC FDDIcontroller/EISA (DEFEA)
- * DEC FDDIcontroller/PCI (DEFPA)
+ * DEC FDDIcontroller/TURBOchannel (DEFTA)
+ * DEC FDDIcontroller/EISA (DEFEA)
+ * DEC FDDIcontroller/PCI (DEFPA)
*
- * Maintainers:
- * LVS Lawrence V. Stefani
- *
- * Contact:
- * The author may be reached at:
+ * The original author:
+ * LVS Lawrence V. Stefani <lstefani@yahoo.com>
*
- * Inet: stefani@lkg.dec.com
- * (NOTE! this address no longer works -jgarzik)
- *
- * Mail: Digital Equipment Corporation
- * 550 King Street
- * M/S: LKG1-3/M07
- * Littleton, MA 01460
+ * Maintainers:
+ * macro Maciej W. Rozycki <macro@linux-mips.org>
*
* Credits:
* I'd like to thank Patricia Cross for helping me get started with
@@ -197,16 +191,16 @@
* Sep 2000 tjeerd Fix leak on unload, cosmetic code cleanup
* Feb 2001 Skb allocation fixes
* Feb 2001 davej PCI enable cleanups.
+ * 04 Aug 2003 macro Converted to the DMA API.
+ * 14 Aug 2004 macro Fix device names reported.
+ * 26 Sep 2004 macro TURBOchannel support.
*/
/* Include files */
#include <linux/module.h>
-
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/string.h>
-#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
@@ -215,19 +209,33 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/netdevice.h>
+#include <linux/fddidevice.h>
+#include <linux/skbuff.h>
+
#include <asm/byteorder.h>
#include <asm/bitops.h>
#include <asm/io.h>
-#include <linux/fddidevice.h>
-#include <linux/skbuff.h>
+#ifdef CONFIG_TC
+#include <asm/dec/tc.h>
+#else
+static int search_tc_card(const char *name) { return -ENODEV; }
+static void claim_tc_card(int slot) { }
+static void release_tc_card(int slot) { }
+static unsigned long get_tc_base_addr(int slot) { return 0; }
+static unsigned long get_tc_irq_nr(int slot) { return -1; }
+#endif
#include "defxx.h"
-/* Version information string - should be updated prior to each new release!!! */
+/* Version information string should be updated prior to each new release! */
+#define DRV_NAME "defxx"
+#define DRV_VERSION "v1.07T"
+#define DRV_RELDATE "2004/09/26"
static char version[] __devinitdata =
- "defxx.c:v1.05e 2001/02/03 Lawrence V. Stefani and others\n";
+ DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
+ " Lawrence V. Stefani and others\n";
#define DYNAMIC_BUFFERS 1
@@ -243,7 +251,7 @@ static char version[] __devinitdata =
static void dfx_bus_init(struct net_device *dev);
static void dfx_bus_config_check(DFX_board_t *bp);
-static int dfx_driver_init(struct net_device *dev);
+static int dfx_driver_init(struct net_device *dev, const char *print_name);
static int dfx_adap_init(DFX_board_t *bp, int get_buffers);
static int dfx_open(struct net_device *dev);
@@ -337,48 +345,84 @@ static inline void dfx_port_write_byte(
int offset,
u8 data
)
+{
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ {
+ volatile u8 *addr = (void *)(bp->base_addr + offset);
+ *addr = data;
+ mb();
+ }
+ else
{
u16 port = bp->base_addr + offset;
outb(data, port);
}
+}
static inline void dfx_port_read_byte(
DFX_board_t *bp,
int offset,
u8 *data
)
+{
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ {
+ volatile u8 *addr = (void *)(bp->base_addr + offset);
+ mb();
+ *data = *addr;
+ }
+ else
{
u16 port = bp->base_addr + offset;
*data = inb(port);
}
+}
static inline void dfx_port_write_long(
DFX_board_t *bp,
int offset,
u32 data
)
+{
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ {
+ volatile u32 *addr = (void *)(bp->base_addr + offset);
+ *addr = data;
+ mb();
+ }
+ else
{
u16 port = bp->base_addr + offset;
outl(data, port);
}
+}
static inline void dfx_port_read_long(
DFX_board_t *bp,
int offset,
u32 *data
)
+{
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ {
+ volatile u32 *addr = (void *)(bp->base_addr + offset);
+ mb();
+ *data = *addr;
+ }
+ else
{
u16 port = bp->base_addr + offset;
*data = inl(port);
}
+}
/*
@@ -393,8 +437,9 @@ static inline void dfx_port_read_long(
* Condition code
*
* Arguments:
- * pdev - pointer to pci device information (NULL for EISA)
- * ioaddr - pointer to port (NULL for PCI)
+ * pdev - pointer to pci device information (NULL for EISA or TURBOchannel)
+ * bus_type - bus type (one of DFX_BUS_TYPE_*)
+ * handle - bus-specific data: slot (TC), pointer to port (EISA), NULL (PCI)
*
* Functional Description:
*
@@ -410,54 +455,68 @@ static inline void dfx_port_read_long(
* initialized and the board resources are read and stored in
* the device structure.
*/
-static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr)
+static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, u32 bus_type, long handle)
{
+ static int version_disp;
+ char *print_name = DRV_NAME;
struct net_device *dev;
DFX_board_t *bp; /* board pointer */
+ long ioaddr; /* pointer to port */
+ unsigned long len; /* resource length */
+ int alloc_size; /* total buffer size used */
int err;
-#ifndef MODULE
- static int version_disp;
-
- if (!version_disp) /* display version info if adapter is found */
- {
+ if (!version_disp) { /* display version info if adapter is found */
version_disp = 1; /* set display flag to TRUE so that */
printk(version); /* we only display this string ONCE */
}
-#endif
- /*
- * init_fddidev() allocates a device structure with private data, clears the device structure and private data,
- * and calls fddi_setup() and register_netdev(). Not much left to do for us here.
- */
- dev = init_fddidev(NULL, sizeof(*bp));
+ if (pdev != NULL)
+ print_name = pdev->slot_name;
+
+ dev = alloc_fddidev(sizeof(*bp));
if (!dev) {
- printk (KERN_ERR "defxx: unable to allocate fddidev, aborting\n");
+ printk(KERN_ERR "%s: unable to allocate fddidev, aborting\n",
+ print_name);
return -ENOMEM;
}
/* Enable PCI device. */
- if (pdev != NULL) {
+ if (bus_type == DFX_BUS_TYPE_PCI) {
err = pci_enable_device (pdev);
if (err) goto err_out;
ioaddr = pci_resource_start (pdev, 1);
}
SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
bp = dev->priv;
- if (!request_region (ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN, dev->name)) {
- printk (KERN_ERR "%s: Cannot reserve I/O resource 0x%x @ 0x%lx, aborting\n",
- dev->name, PFI_K_CSR_IO_LEN, ioaddr);
+ if (bus_type == DFX_BUS_TYPE_TC) {
+ /* TURBOchannel board */
+ bp->slot = handle;
+ claim_tc_card(bp->slot);
+ ioaddr = get_tc_base_addr(handle) + PI_TC_K_CSR_OFFSET;
+ len = PI_TC_K_CSR_LEN;
+ } else if (bus_type == DFX_BUS_TYPE_EISA) {
+ /* EISA board */
+ ioaddr = handle;
+ len = PI_ESIC_K_CSR_IO_LEN;
+ } else
+ /* PCI board */
+ len = PFI_K_CSR_IO_LEN;
+ dev->base_addr = ioaddr; /* save port (I/O) base address */
+
+ if (!request_region(ioaddr, len, print_name)) {
+ printk(KERN_ERR "%s: Cannot reserve I/O resource "
+ "0x%lx @ 0x%lx, aborting\n", print_name, len, ioaddr);
err = -EBUSY;
goto err_out;
}
/* Initialize new device structure */
- dev->base_addr = ioaddr; /* save port (I/O) base address */
-
dev->get_stats = dfx_ctl_get_stats;
dev->open = dfx_open;
dev->stop = dfx_close;
@@ -465,37 +524,54 @@ static int __devinit dfx_init_one_pci_or
dev->set_multicast_list = dfx_ctl_set_multicast_list;
dev->set_mac_address = dfx_ctl_set_mac_address;
- if (pdev == NULL) {
- /* EISA board */
- bp->bus_type = DFX_BUS_TYPE_EISA;
+ bp->bus_type = bus_type;
+ if (bus_type == DFX_BUS_TYPE_TC || bus_type == DFX_BUS_TYPE_EISA) {
+ /* TURBOchannel or EISA board */
bp->next = root_dfx_eisa_dev;
root_dfx_eisa_dev = dev;
} else {
/* PCI board */
- bp->bus_type = DFX_BUS_TYPE_PCI;
bp->pci_dev = pdev;
pci_set_drvdata (pdev, dev);
pci_set_master (pdev);
}
- if (dfx_driver_init(dev) != DFX_K_SUCCESS) {
+
+ if (dfx_driver_init(dev, print_name) != DFX_K_SUCCESS) {
err = -ENODEV;
goto err_out_region;
}
+ err = register_netdev(dev);
+ if (err)
+ goto err_out_kfree;
+
+ printk("%s: registered as %s\n", print_name, dev->name);
return 0;
+err_out_kfree:
+ alloc_size = sizeof(PI_DESCR_BLOCK) +
+ PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+ sizeof(PI_CONSUMER_BLOCK) +
+ (PI_ALIGN_K_DESC_BLK - 1);
+ if (bp->kmalloced)
+ pci_free_consistent(pdev, alloc_size,
+ bp->kmalloced, bp->kmalloced_dma);
err_out_region:
- release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN);
+ release_region(ioaddr, len);
err_out:
- unregister_netdev(dev);
- kfree(dev);
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ release_tc_card(bp->slot);
+ free_netdev(dev);
return err;
}
static int __devinit dfx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
- return dfx_init_one_pci_or_eisa(pdev, 0);
+ return dfx_init_one_pci_or_eisa(pdev, DFX_BUS_TYPE_PCI, 0);
}
static int __init dfx_eisa_init(void)
@@ -507,6 +583,7 @@ static int __init dfx_eisa_init(void)
DBG_printk("In dfx_eisa_init...\n");
+#ifdef CONFIG_EISA
/* Scan for FDDI EISA controllers */
for (i=0; i < DFX_MAX_EISA_SLOTS; i++) /* only scan for up to 16 EISA slots */
@@ -517,9 +594,27 @@ static int __init dfx_eisa_init(void)
{
port = (i << 12); /* recalc base addr */
- if (dfx_init_one_pci_or_eisa(NULL, port) == 0) rc = 0;
+ if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_EISA, port) == 0) rc = 0;
}
}
+#endif
+ return rc;
+}
+
+static int __init dfx_tc_init(void)
+{
+ int rc = -ENODEV;
+ int slot; /* TC slot number */
+
+ DBG_printk("In dfx_tc_init...\n");
+
+ /* Scan for FDDI TC controllers */
+ while ((slot = search_tc_card("PMAF-F")) >= 0) {
+ if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_TC, slot) == 0)
+ rc = 0;
+ else
+ break;
+ }
return rc;
}
@@ -583,8 +678,9 @@ static void __devinit dfx_bus_init(struc
/* Initialize adapter based on bus type */
- if (bp->bus_type == DFX_BUS_TYPE_EISA)
- {
+ if (bp->bus_type == DFX_BUS_TYPE_TC) {
+ dev->irq = get_tc_irq_nr(bp->slot);
+ } else if (bp->bus_type == DFX_BUS_TYPE_EISA) {
/* Get the interrupt level from the ESIC chip */
dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val);
@@ -766,6 +862,7 @@ static void __devinit dfx_bus_config_che
*
* Arguments:
* dev - pointer to device information
+ * print_name - printable device name
*
* Functional Description:
* This function allocates additional resources such as the host memory
@@ -780,20 +877,21 @@ static void __devinit dfx_bus_config_che
* or read adapter MAC address
*
* Assumptions:
- * Memory allocated from kmalloc() call is physically contiguous, locked
- * memory whose physical address equals its virtual address.
+ * Memory allocated from pci_alloc_consistent() call is physically
+ * contiguous, locked memory.
*
* Side Effects:
* Adapter is reset and should be in DMA_UNAVAILABLE state before
* returning from this routine.
*/
-static int __devinit dfx_driver_init(struct net_device *dev)
+static int __devinit dfx_driver_init(struct net_device *dev,
+ const char *print_name)
{
DFX_board_t *bp = dev->priv;
int alloc_size; /* total buffer size needed */
char *top_v, *curr_v; /* virtual addrs into memory block */
- u32 top_p, curr_p; /* physical addrs into memory block */
+ dma_addr_t top_p, curr_p; /* physical addrs into memory block */
u32 data; /* host data register value */
DBG_printk("In dfx_driver_init...\n");
@@ -837,26 +935,20 @@ static int __devinit dfx_driver_init(str
/* Read the factory MAC address from the adapter then save it */
- if (dfx_hw_port_ctrl_req(bp,
- PI_PCTRL_M_MLA,
- PI_PDATA_A_MLA_K_LO,
- 0,
- &data) != DFX_K_SUCCESS)
- {
- printk("%s: Could not read adapter factory MAC address!\n", dev->name);
+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0,
+ &data) != DFX_K_SUCCESS) {
+ printk("%s: Could not read adapter factory MAC address!\n",
+ print_name);
return(DFX_K_FAILURE);
- }
+ }
memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
- if (dfx_hw_port_ctrl_req(bp,
- PI_PCTRL_M_MLA,
- PI_PDATA_A_MLA_K_HI,
- 0,
- &data) != DFX_K_SUCCESS)
- {
- printk("%s: Could not read adapter factory MAC address!\n", dev->name);
+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
+ &data) != DFX_K_SUCCESS) {
+ printk("%s: Could not read adapter factory MAC address!\n",
+ print_name);
return(DFX_K_FAILURE);
- }
+ }
memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
/*
@@ -867,28 +959,27 @@ static int __devinit dfx_driver_init(str
*/
memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN);
- if (bp->bus_type == DFX_BUS_TYPE_EISA)
- printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
- dev->name,
- dev->base_addr,
- dev->irq,
- dev->dev_addr[0],
- dev->dev_addr[1],
- dev->dev_addr[2],
- dev->dev_addr[3],
- dev->dev_addr[4],
- dev->dev_addr[5]);
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ printk("%s: DEFTA at addr = 0x%lX, IRQ = %d, "
+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+ print_name, dev->base_addr, dev->irq,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5]);
+ else if (bp->bus_type == DFX_BUS_TYPE_EISA)
+ printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, "
+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+ print_name, dev->base_addr, dev->irq,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5]);
else
- printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
- dev->name,
- dev->base_addr,
- dev->irq,
- dev->dev_addr[0],
- dev->dev_addr[1],
- dev->dev_addr[2],
- dev->dev_addr[3],
- dev->dev_addr[4],
- dev->dev_addr[5]);
+ printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, "
+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n",
+ print_name, dev->base_addr, dev->irq,
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5]);
/*
* Get memory for descriptor block, consumer block, and other buffers
@@ -903,14 +994,15 @@ static int __devinit dfx_driver_init(str
#endif
sizeof(PI_CONSUMER_BLOCK) +
(PI_ALIGN_K_DESC_BLK - 1);
- bp->kmalloced = top_v = (char *) kmalloc(alloc_size, GFP_KERNEL);
- if (top_v == NULL)
- {
- printk("%s: Could not allocate memory for host buffers and structures!\n", dev->name);
+ bp->kmalloced = top_v = pci_alloc_consistent(bp->pci_dev, alloc_size,
+ &bp->kmalloced_dma);
+ if (top_v == NULL) {
+ printk("%s: Could not allocate memory for host buffers "
+ "and structures!\n", print_name);
return(DFX_K_FAILURE);
- }
+ }
memset(top_v, 0, alloc_size); /* zero out memory before continuing */
- top_p = virt_to_bus(top_v); /* get physical address of buffer */
+ top_p = bp->kmalloced_dma; /* get physical address of buffer */
/*
* To guarantee the 8K alignment required for the descriptor block, 8K - 1
@@ -924,7 +1016,7 @@ static int __devinit dfx_driver_init(str
* for allocating the needed memory.
*/
- curr_p = (u32) (ALIGN(top_p, PI_ALIGN_K_DESC_BLK));
+ curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK);
curr_v = top_v + (curr_p - top_p);
/* Reserve space for descriptor block */
@@ -965,14 +1057,20 @@ static int __devinit dfx_driver_init(str
/* Display virtual and physical addresses if debug driver */
- DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n", dev->name, (long)bp->descr_block_virt, bp->descr_block_phys);
- DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n", dev->name, (long)bp->cmd_req_virt, bp->cmd_req_phys);
- DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n", dev->name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys);
- DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n", dev->name, (long)bp->rcv_block_virt, bp->rcv_block_phys);
- DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n", dev->name, (long)bp->cons_block_virt, bp->cons_block_phys);
+ DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n",
+ print_name,
+ (long)bp->descr_block_virt, bp->descr_block_phys);
+ DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n",
+ print_name, (long)bp->cmd_req_virt, bp->cmd_req_phys);
+ DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n",
+ print_name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys);
+ DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n",
+ print_name, (long)bp->rcv_block_virt, bp->rcv_block_phys);
+ DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n",
+ print_name, (long)bp->cons_block_virt, bp->cons_block_phys);
return(DFX_K_SUCCESS);
- }
+}
/*
@@ -1218,7 +1316,9 @@ static int dfx_open(struct net_device *d
/* Register IRQ - support shared interrupts by passing device ptr */
- ret = request_irq(dev->irq, (void *)dfx_interrupt, SA_SHIRQ, dev->name, dev);
+ ret = request_irq(dev->irq, (void *)dfx_interrupt,
+ (bp->bus_type == DFX_BUS_TYPE_TC) ? 0 : SA_SHIRQ,
+ dev->name, dev);
if (ret) {
printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
return ret;
@@ -1737,7 +1837,7 @@ static void dfx_interrupt(int irq, void
dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL,
(PFI_MODE_M_PDQ_INT_ENB + PFI_MODE_M_DMA_ENB));
}
- else
+ else if (bp->bus_type == DFX_BUS_TYPE_EISA)
{
/* Disable interrupts at the ESIC */
@@ -1755,6 +1855,13 @@ static void dfx_interrupt(int irq, void
tmp |= PI_CONFIG_STAT_0_M_INT_ENB;
dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, tmp);
}
+ else {
+ /* TC doesn't share interrupts so no need to disable them */
+
+ /* Call interrupt service routine for this adapter */
+
+ dfx_int_common(dev);
+ }
spin_unlock(&bp->lock);
}
@@ -2663,12 +2770,12 @@ static int dfx_hw_dma_uninit(DFX_board_t
static void my_skb_align(struct sk_buff *skb, int n)
{
- u32 x=(u32)skb->data; /* We only want the low bits .. */
- u32 v;
+ unsigned long x = (unsigned long)skb->data;
+ unsigned long v;
- v=(x+n-1)&~(n-1); /* Where we want to be */
+ v = ALIGN(x, n); /* Where we want to be */
- skb_reserve(skb, v-x);
+ skb_reserve(skb, v - x);
}
@@ -2745,7 +2852,10 @@ static int dfx_rcv_init(DFX_board_t *bp,
*/
my_skb_align(newskb, 128);
- bp->descr_block_virt->rcv_data[i+j].long_1 = virt_to_bus(newskb->data);
+ bp->descr_block_virt->rcv_data[i + j].long_1 =
+ (u32)pci_map_single(bp->pci_dev, newskb->data,
+ NEW_SKB_SIZE,
+ PCI_DMA_FROMDEVICE);
/*
* p_rcv_buff_va is only used inside the
* kernel so we put the skb pointer here.
@@ -2859,9 +2969,17 @@ static void dfx_rcv_queue_process(
my_skb_align(newskb, 128);
skb = (struct sk_buff *)bp->p_rcv_buff_va[entry];
+ pci_unmap_single(bp->pci_dev,
+ bp->descr_block_virt->rcv_data[entry].long_1,
+ NEW_SKB_SIZE,
+ PCI_DMA_FROMDEVICE);
skb_reserve(skb, RCV_BUFF_K_PADDING);
bp->p_rcv_buff_va[entry] = (char *)newskb;
- bp->descr_block_virt->rcv_data[entry].long_1 = virt_to_bus(newskb->data);
+ bp->descr_block_virt->rcv_data[entry].long_1 =
+ (u32)pci_map_single(bp->pci_dev,
+ newskb->data,
+ NEW_SKB_SIZE,
+ PCI_DMA_FROMDEVICE);
} else
skb = NULL;
} else
@@ -2934,7 +3052,7 @@ static void dfx_rcv_queue_process(
* is contained in a single physically contiguous buffer
* in which the virtual address of the start of packet
* (skb->data) can be converted to a physical address
- * by using virt_to_bus().
+ * by using pci_map_single().
*
* Since the adapter architecture requires a three byte
* packet request header to prepend the start of packet,
@@ -3082,12 +3200,13 @@ static int dfx_xmt_queue_pkt(
* skb->data.
* 6. The physical address of the start of packet
* can be determined from the virtual address
- * by using virt_to_bus() and is only 32-bits
+ * by using pci_map_single() and is only 32-bits
* wide.
*/
p_xmt_descr->long_0 = (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN));
- p_xmt_descr->long_1 = (u32) virt_to_bus(skb->data);
+ p_xmt_descr->long_1 = (u32)pci_map_single(bp->pci_dev, skb->data,
+ skb->len, PCI_DMA_TODEVICE);
/*
* Verify that descriptor is actually available
@@ -3171,6 +3290,7 @@ static int dfx_xmt_done(DFX_board_t *bp)
{
XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */
PI_TYPE_2_CONSUMER *p_type_2_cons; /* ptr to rcv/xmt consumer block register */
+ u8 comp; /* local transmit completion index */
int freed = 0; /* buffers freed */
/* Service all consumed transmit frames */
@@ -3188,7 +3308,11 @@ static int dfx_xmt_done(DFX_board_t *bp)
bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len;
/* Return skb to operating system */
-
+ comp = bp->rcv_xmt_reg.index.xmt_comp;
+ pci_unmap_single(bp->pci_dev,
+ bp->descr_block_virt->xmt_data[comp].long_1,
+ p_xmt_drv_descr->p_skb->len,
+ PCI_DMA_TODEVICE);
dev_kfree_skb_irq(p_xmt_drv_descr->p_skb);
/*
@@ -3297,6 +3421,7 @@ static void dfx_xmt_flush( DFX_board_t *
{
u32 prod_cons; /* rcv/xmt consumer block longword */
XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */
+ u8 comp; /* local transmit completion index */
/* Flush all outstanding transmit frames */
@@ -3307,7 +3432,11 @@ static void dfx_xmt_flush( DFX_board_t *
p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]);
/* Return skb to operating system */
-
+ comp = bp->rcv_xmt_reg.index.xmt_comp;
+ pci_unmap_single(bp->pci_dev,
+ bp->descr_block_virt->xmt_data[comp].long_1,
+ p_xmt_drv_descr->p_skb->len,
+ PCI_DMA_TODEVICE);
dev_kfree_skb(p_xmt_drv_descr->p_skb);
/* Increment transmit error counter */
@@ -3337,12 +3466,36 @@ static void dfx_xmt_flush( DFX_board_t *
static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct net_device *dev)
{
- DFX_board_t *bp = dev->priv;
+ DFX_board_t *bp = dev->priv;
+ unsigned long len; /* resource length */
+ int alloc_size; /* total buffer size used */
+ if (bp->bus_type == DFX_BUS_TYPE_TC) {
+ /* TURBOchannel board */
+ len = PI_TC_K_CSR_LEN;
+ } else if (bp->bus_type == DFX_BUS_TYPE_EISA) {
+ /* EISA board */
+ len = PI_ESIC_K_CSR_IO_LEN;
+ } else {
+ len = PFI_K_CSR_IO_LEN;
+ }
unregister_netdev(dev);
- release_region(dev->base_addr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN );
- if (bp->kmalloced) kfree(bp->kmalloced);
- kfree(dev);
+ release_region(dev->base_addr, len);
+
+ if (bp->bus_type == DFX_BUS_TYPE_TC)
+ release_tc_card(bp->slot);
+
+ alloc_size = sizeof(PI_DESCR_BLOCK) +
+ PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX +
+#ifndef DYNAMIC_BUFFERS
+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) +
+#endif
+ sizeof(PI_CONSUMER_BLOCK) +
+ (PI_ALIGN_K_DESC_BLK - 1);
+ if (bp->kmalloced)
+ pci_free_consistent(pdev, alloc_size, bp->kmalloced,
+ bp->kmalloced_dma);
+ free_netdev(dev);
}
static void __devexit dfx_remove_one (struct pci_dev *pdev)
@@ -3353,21 +3506,22 @@ static void __devexit dfx_remove_one (st
pci_set_drvdata(pdev, NULL);
}
-static struct pci_device_id dfx_pci_tbl[] __devinitdata = {
+static struct pci_device_id dfx_pci_tbl[] = {
{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI, PCI_ANY_ID, PCI_ANY_ID, },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, dfx_pci_tbl);
static struct pci_driver dfx_driver = {
- name: "defxx",
- probe: dfx_init_one,
- remove: __devexit_p(dfx_remove_one),
- id_table: dfx_pci_tbl,
+ .name = "defxx",
+ .probe = dfx_init_one,
+ .remove = __devexit_p(dfx_remove_one),
+ .id_table = dfx_pci_tbl,
};
static int dfx_have_pci;
static int dfx_have_eisa;
+static int dfx_have_tc;
static void __exit dfx_eisa_cleanup(void)
@@ -3388,12 +3542,7 @@ static void __exit dfx_eisa_cleanup(void
static int __init dfx_init(void)
{
- int rc_pci, rc_eisa;
-
-/* when a module, this is printed whether or not devices are found in probe */
-#ifdef MODULE
- printk(version);
-#endif
+ int rc_pci, rc_eisa, rc_tc;
rc_pci = pci_module_init(&dfx_driver);
if (rc_pci >= 0) dfx_have_pci = 1;
@@ -3401,20 +3550,27 @@ static int __init dfx_init(void)
rc_eisa = dfx_eisa_init();
if (rc_eisa >= 0) dfx_have_eisa = 1;
- return ((rc_eisa < 0) ? 0 : rc_eisa) + ((rc_pci < 0) ? 0 : rc_pci);
+ rc_tc = dfx_tc_init();
+ if (rc_tc >= 0) dfx_have_tc = 1;
+
+ return ((rc_tc < 0) ? 0 : rc_tc) +
+ ((rc_eisa < 0) ? 0 : rc_eisa) +
+ ((rc_pci < 0) ? 0 : rc_pci);
}
static void __exit dfx_cleanup(void)
{
if (dfx_have_pci)
pci_unregister_driver(&dfx_driver);
- if (dfx_have_eisa)
+ if (dfx_have_eisa || dfx_have_tc)
dfx_eisa_cleanup();
-
}
module_init(dfx_init);
module_exit(dfx_cleanup);
+MODULE_AUTHOR("Lawrence V. Stefani");
+MODULE_DESCRIPTION("DEC FDDIcontroller EISA/PCI (DEFEA/DEFPA) driver "
+ DRV_VERSION " " DRV_RELDATE);
MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/net/defxx.h
===================================================================
--- linux-2.4.35.4.orig/drivers/net/defxx.h
+++ linux-2.4.35.4/drivers/net/defxx.h
@@ -12,17 +12,11 @@
* Contains all definitions specified by port specification and required
* by the defxx.c driver.
*
- * Maintainers:
- * LVS Lawrence V. Stefani
- *
- * Contact:
- * The author may be reached at:
+ * The original author:
+ * LVS Lawrence V. Stefani <lstefani@yahoo.com>
*
- * Inet: stefani@lkg.dec.com
- * Mail: Digital Equipment Corporation
- * 550 King Street
- * M/S: LKG1-3/M07
- * Littleton, MA 01460
+ * Maintainers:
+ * macro Maciej W. Rozycki <macro@linux-mips.org>
*
* Modification History:
* Date Name Description
@@ -30,6 +24,7 @@
* 09-Sep-96 LVS Added group_prom field. Moved read/write I/O
* macros to DEFXX.C.
* 12-Sep-96 LVS Removed packet request header pointers.
+ * 04 Aug 2003 macro Converted to the DMA API.
*/
#ifndef _DEFXX_H_
@@ -1467,6 +1462,11 @@ typedef union
#endif /* #ifndef BIG_ENDIAN */
+/* Define TC PDQ CSR offset and length */
+
+#define PI_TC_K_CSR_OFFSET 0x100000
+#define PI_TC_K_CSR_LEN 0x80 /* 128 bytes */
+
/* Define EISA controller register offsets */
#define PI_ESIC_K_BURST_HOLDOFF 0x040
@@ -1634,6 +1634,7 @@ typedef union
#define DFX_BUS_TYPE_PCI 0 /* type code for DEC FDDIcontroller/PCI */
#define DFX_BUS_TYPE_EISA 1 /* type code for DEC FDDIcontroller/EISA */
+#define DFX_BUS_TYPE_TC 2 /* type code for DEC FDDIcontroller/TURBOchannel */
#define DFX_FC_PRH2_PRH1_PRH0 0x54003820 /* Packet Request Header bytes + FC */
#define DFX_PRH0_BYTE 0x20 /* Packet Request Header byte 0 */
@@ -1704,17 +1705,19 @@ typedef struct DFX_board_tag
{
/* Keep virtual and physical pointers to locked, physically contiguous memory */
- char *kmalloced; /* kfree this on unload */
+ char *kmalloced; /* pci_free_consistent this on unload */
+ dma_addr_t kmalloced_dma;
+ /* DMA handle for the above */
PI_DESCR_BLOCK *descr_block_virt; /* PDQ descriptor block virt address */
- u32 descr_block_phys; /* PDQ descriptor block phys address */
+ dma_addr_t descr_block_phys; /* PDQ descriptor block phys address */
PI_DMA_CMD_REQ *cmd_req_virt; /* Command request buffer virt address */
- u32 cmd_req_phys; /* Command request buffer phys address */
+ dma_addr_t cmd_req_phys; /* Command request buffer phys address */
PI_DMA_CMD_RSP *cmd_rsp_virt; /* Command response buffer virt address */
- u32 cmd_rsp_phys; /* Command response buffer phys address */
+ dma_addr_t cmd_rsp_phys; /* Command response buffer phys address */
char *rcv_block_virt; /* LLC host receive queue buf blk virt */
- u32 rcv_block_phys; /* LLC host receive queue buf blk phys */
+ dma_addr_t rcv_block_phys; /* LLC host receive queue buf blk phys */
PI_CONSUMER_BLOCK *cons_block_virt; /* PDQ consumer block virt address */
- u32 cons_block_phys; /* PDQ consumer block phys address */
+ dma_addr_t cons_block_phys; /* PDQ consumer block phys address */
/* Keep local copies of Type 1 and Type 2 register data */
@@ -1758,8 +1761,9 @@ typedef struct DFX_board_tag
struct net_device *dev; /* pointer to device structure */
struct net_device *next;
- u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */
- u16 base_addr; /* base I/O address (same as dev->base_addr) */
+ u32 bus_type; /* bus type (0 == PCI, 1 == EISA, 2 == TC) */
+ long base_addr; /* base I/O address (same as dev->base_addr) */
+ int slot; /* TC slot number */
struct pci_dev * pci_dev;
u32 full_duplex_enb; /* FDDI Full Duplex enable (1 == on, 2 == off) */
u32 req_ttrt; /* requested TTRT value (in 80ns units) */
Index: linux-2.4.35.4/drivers/net/hamradio/hdlcdrv.c
===================================================================
--- linux-2.4.35.4.orig/drivers/net/hamradio/hdlcdrv.c
+++ linux-2.4.35.4/drivers/net/hamradio/hdlcdrv.c
@@ -587,6 +587,8 @@ static int hdlcdrv_close(struct net_devi
return -EINVAL;
s = (struct hdlcdrv_state *)dev->priv;
+ netif_stop_queue(dev);
+
if (s->ops && s->ops->close)
i = s->ops->close(dev);
if (s->skb)
Index: linux-2.4.35.4/drivers/net/irda/au1k_ir.c
===================================================================
--- linux-2.4.35.4.orig/drivers/net/irda/au1k_ir.c
+++ linux-2.4.35.4/drivers/net/irda/au1k_ir.c
@@ -81,10 +81,6 @@ static char version[] __devinitdata =
#define RUN_AT(x) (jiffies + (x))
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-static BCSR * const bcsr = (BCSR *)0xAE000000;
-#endif
-
static spinlock_t ir_lock = SPIN_LOCK_UNLOCKED;
/*
Index: linux-2.4.35.4/drivers/net/sgiseeq.c
===================================================================
--- linux-2.4.35.4.orig/drivers/net/sgiseeq.c
+++ linux-2.4.35.4/drivers/net/sgiseeq.c
@@ -24,16 +24,16 @@
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>
+#include <asm/paccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/sgi/mc.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
#include <asm/sgialib.h>
#include "sgiseeq.h"
-static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n";
-
static char *sgiseeqstr = "SGI Seeq8003";
/*
@@ -113,9 +113,9 @@ static struct net_device *root_sgiseeq_d
static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs)
{
- hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ;
+ hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ;
udelay(20);
- hregs->rx_reset = 0;
+ hregs->reset = 0;
}
static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs,
@@ -238,7 +238,6 @@ void sgiseeq_dump_rings(void)
#define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF)
#define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2)
-#define RDMACFG_INIT (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ)
static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp,
struct sgiseeq_regs *sregs)
@@ -260,8 +259,6 @@ static int init_seeq(struct net_device *
sregs->tstat = TSTAT_INIT_SEEQ;
}
- hregs->rx_dconfig |= RDMACFG_INIT;
-
hregs->rx_ndptr = PHYSADDR(&sp->srings.rx_desc[0]);
hregs->tx_ndptr = PHYSADDR(&sp->srings.tx_desc[0]);
@@ -432,7 +429,7 @@ static void sgiseeq_interrupt(int irq, v
spin_lock(&sp->tx_lock);
/* Ack the IRQ and set software state. */
- hregs->rx_reset = HPC3_ERXRST_CLRIRQ;
+ hregs->reset = HPC3_ERST_CLRIRQ;
/* Always check for received packets. */
sgiseeq_rx(dev, sp, hregs, sregs);
@@ -616,7 +613,7 @@ static inline void setup_rx_ring(struct
#define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf))
-int sgiseeq_init(struct hpc3_regs* regs, int irq)
+int sgiseeq_init(struct hpc3_regs* hpcregs, int irq, int has_eeprom)
{
struct net_device *dev;
struct sgiseeq_private *sp;
@@ -629,7 +626,7 @@ int sgiseeq_init(struct hpc3_regs* regs,
goto err_out;
}
/* Make private data page aligned */
- sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL);
+ sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL);
if (!sp) {
printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n");
err = -ENOMEM;
@@ -644,7 +641,9 @@ int sgiseeq_init(struct hpc3_regs* regs,
#define EADDR_NVOFS 250
for (i = 0; i < 3; i++) {
- unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i);
+ unsigned short tmp = has_eeprom ?
+ ip22_eeprom_read(&hpcregs->eeprom, EADDR_NVOFS / 2+i) :
+ ip22_nvram_read(EADDR_NVOFS / 2+i);
dev->dev_addr[2 * i] = tmp >> 8;
dev->dev_addr[2 * i + 1] = tmp & 0xff;
@@ -654,8 +653,8 @@ int sgiseeq_init(struct hpc3_regs* regs,
gpriv = sp;
gdev = dev;
#endif
- sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0];
- sp->hregs = &hpc3c0->ethregs;
+ sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0];
+ sp->hregs = &hpcregs->ethregs;
sp->name = sgiseeqstr;
sp->mode = SEEQ_RCMD_RBCAST;
@@ -672,6 +671,11 @@ int sgiseeq_init(struct hpc3_regs* regs,
setup_rx_ring(sp->srings.rx_desc, SEEQ_RX_BUFFERS);
setup_tx_ring(sp->srings.tx_desc, SEEQ_TX_BUFFERS);
+ /* Setup PIO and DMA transfer timing */
+ sp->hregs->pconfig = 0x161;
+ sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP |
+ HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026;
+
/* Reset the chip. */
hpc3_eth_reset(sp->hregs);
@@ -699,7 +703,7 @@ int sgiseeq_init(struct hpc3_regs* regs,
goto err_out_free_irq;
}
- printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name);
+ printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr);
for (i = 0; i < 6; i++)
printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':');
@@ -721,10 +725,22 @@ err_out:
static int __init sgiseeq_probe(void)
{
- printk(version);
+ unsigned int tmp, ret1, ret2 = 0;
/* On board adapter on 1st HPC is always present */
- return sgiseeq_init(hpc3c0, SGI_ENET_IRQ);
+ ret1 = sgiseeq_init(hpc3c0, SGI_ENET_IRQ, 0);
+ /* Let's see if second HPC is there */
+ if (!(ip22_is_fullhouse()) &&
+ get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]) == 0) {
+ sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 |
+ SGIMC_GIOPAR_EXP164 |
+ SGIMC_GIOPAR_HPC264;
+ hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
+ /* interrupt/config register on Challenge S Mezz board */
+ hpc3c1->pbus_extregs[0][0] = 0x30;
+ ret2 = sgiseeq_init(hpc3c1, SGI_GIO_0_IRQ, 1);
+ }
+ return (ret1 & ret2) ? ret1 : 0;
}
static void __exit sgiseeq_exit(void)
@@ -747,4 +763,6 @@ static void __exit sgiseeq_exit(void)
module_init(sgiseeq_probe);
module_exit(sgiseeq_exit);
+MODULE_DESCRIPTION("SGI Seeq 8003 driver");
+MODULE_AUTHOR("David S. Miller");
MODULE_LICENSE("GPL");
Index: linux-2.4.35.4/drivers/pci/pci.c
===================================================================
--- linux-2.4.35.4.orig/drivers/pci/pci.c
+++ linux-2.4.35.4/drivers/pci/pci.c
@@ -1281,11 +1281,17 @@ static int __devinit pci_scan_bridge(str
{
unsigned int buses;
unsigned short cr;
+ unsigned short bctl;
struct pci_bus *child;
int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass);
+ /* Disable MasterAbortMode during probing to avoid reporting
+ of bus errors (in some architectures) */
+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
+ bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
if ((buses & 0xffff00) && !pcibios_assign_all_busses()) {
/*
* Bus already configured by firmware, process it in the first
@@ -1351,6 +1357,7 @@ static int __devinit pci_scan_bridge(str
pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
pci_write_config_word(dev, PCI_COMMAND, cr);
}
+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number);
return max;
}
Index: linux-2.4.35.4/drivers/pcmcia/au1000_db1x00.c
===================================================================
--- linux-2.4.35.4.orig/drivers/pcmcia/au1000_db1x00.c
+++ linux-2.4.35.4/drivers/pcmcia/au1000_db1x00.c
@@ -1,6 +1,6 @@
/*
*
- * Alchemy Semi Db1x00 boards specific pcmcia routines.
+ * AMD Alchemy DUAL-SLOT Db1x00 boards' specific pcmcia routines.
*
* Copyright 2002 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
@@ -54,9 +54,20 @@
#include <asm/au1000.h>
#include <asm/au1000_pcmcia.h>
+#if defined(CONFIG_MIPS_PB1200)
+#include <asm/pb1200.h>
+#elif defined(CONFIG_MIPS_DB1200)
+#include <asm/db1200.h>
+#else
#include <asm/db1x00.h>
+#endif
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
static int db1x00_pcmcia_init(struct pcmcia_init *init)
{
@@ -76,7 +87,7 @@ static int
db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
{
u32 inserted;
- unsigned char vs;
+ u16 vs;
if(sock > PCMCIA_MAX_SOCK) return -1;
@@ -87,11 +98,11 @@ db1x00_pcmcia_socket_state(unsigned sock
if (sock == 0) {
vs = bcsr->status & 0x3;
- inserted = !(bcsr->status & (1<<4));
+ inserted = BOARD_CARD_INSERTED(0);
}
else {
vs = (bcsr->status & 0xC)>>2;
- inserted = !(bcsr->status & (1<<5));
+ inserted = BOARD_CARD_INSERTED(1);
}
DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n",
@@ -144,16 +155,9 @@ static int db1x00_pcmcia_get_irq_info(st
if(info->sock > PCMCIA_MAX_SOCK) return -1;
if(info->sock == 0)
-#ifdef CONFIG_MIPS_DB1550
- info->irq = AU1000_GPIO_3;
+ info->irq = BOARD_PC0_INT;
else
- info->irq = AU1000_GPIO_5;
-#else
- info->irq = AU1000_GPIO_2;
- else
- info->irq = AU1000_GPIO_5;
-#endif
-
+ info->irq = BOARD_PC1_INT;
return 0;
}
Index: linux-2.4.35.4/drivers/pcmcia/Config.in
===================================================================
--- linux-2.4.35.4.orig/drivers/pcmcia/Config.in
+++ linux-2.4.35.4/drivers/pcmcia/Config.in
@@ -30,16 +30,14 @@ if [ "$CONFIG_PCMCIA" != "n" ]; then
dep_tristate ' M8xx support' CONFIG_PCMCIA_M8XX $CONFIG_PCMCIA
fi
if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
- dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
- if [ "$CONFIG_PCMCIA_AU1X00" != "n" ]; then
- bool ' Pb1x00 board support' CONFIG_PCMCIA_PB1X00
- bool ' Db1x00 board support' CONFIG_PCMCIA_DB1X00
- bool ' XXS1500 board support' CONFIG_PCMCIA_XXS1500
- fi
+ dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA
fi
if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then
dep_bool ' SiByte PCMCIA support' CONFIG_PCMCIA_SIBYTE $CONFIG_PCMCIA $CONFIG_BLK_DEV_IDE_SIBYTE
fi
+ if [ "$CONFIG_VRC4171" = "y" -o "$CONFIG_VRC4171" = "m" ]; then
+ dep_tristate ' NEC VRC4171 Card Controllers support' CONFIG_PCMCIA_VRC4171 $CONFIG_PCMCIA
+ fi
if [ "$CONFIG_VRC4173" = "y" -o "$CONFIG_VRC4173" = "m" ]; then
dep_tristate ' NEC VRC4173 CARDU support' CONFIG_PCMCIA_VRC4173 $CONFIG_PCMCIA
fi
Index: linux-2.4.35.4/drivers/pcmcia/Makefile
===================================================================
--- linux-2.4.35.4.orig/drivers/pcmcia/Makefile
+++ linux-2.4.35.4/drivers/pcmcia/Makefile
@@ -61,9 +61,18 @@ endif
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
au1000_ss-objs-y := au1000_generic.o
-au1000_ss-objs-$(CONFIG_PCMCIA_PB1X00) += au1000_pb1x00.o
-au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o
-au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o
+au1000_ss-objs-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_PB1550) += au1000_pb1550.o
+au1000_ss-objs-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
+au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3) += au1000_hydrogen3.o
+au1000_ss-objs-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o
obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o
@@ -89,6 +98,7 @@ sa1100_cs-objs-$(CONFIG_SA1100_STORK) +
sa1100_cs-objs-$(CONFIG_SA1100_XP860) += sa1100_xp860.o sa1111_generic.o
sa1100_cs-objs-$(CONFIG_SA1100_YOPY) += sa1100_yopy.o
+obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
include $(TOPDIR)/Rules.make
Index: linux-2.4.35.4/drivers/pcmcia/vrc4171_card.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/pcmcia/vrc4171_card.c
@@ -0,0 +1,886 @@
+/*
+ * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services.
+ *
+ * Copyright (C) 2003 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/vr41xx/vrc4171.h>
+
+#include <pcmcia/ss.h>
+
+#include "i82365.h"
+
+MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services");
+MODULE_AUTHOR("Yoichi Yuasa <yuasa@hh.iij4u.or.jp>");
+MODULE_LICENSE("GPL");
+
+#define CARD_MAX_SLOTS 2
+#define CARD_SLOTA 0
+#define CARD_SLOTB 1
+#define CARD_SLOTB_OFFSET 0x40
+
+#define CARD_MEM_START 0x10000000
+#define CARD_MEM_END 0x13ffffff
+#define CARD_MAX_MEM_OFFSET 0x3ffffff
+#define CARD_MAX_MEM_SPEED 1000
+
+#define CARD_CONTROLLER_INDEX 0x03e0
+#define CARD_CONTROLLER_DATA 0x03e1
+#define CARD_CONTROLLER_SIZE 2
+ /* Power register */
+ #define VPP_GET_VCC 0x01
+ #define POWER_ENABLE 0x10
+ #define CARD_VOLTAGE_SENSE 0x1f
+ #define VCC_3VORXV_CAPABLE 0x00
+ #define VCC_XV_ONLY 0x01
+ #define VCC_3V_CAPABLE 0x02
+ #define VCC_5V_ONLY 0x03
+ #define CARD_VOLTAGE_SELECT 0x2f
+ #define VCC_3V 0x01
+ #define VCC_5V 0x00
+ #define VCC_XV 0x02
+ #define VCC_STATUS_3V 0x02
+ #define VCC_STATUS_5V 0x01
+ #define VCC_STATUS_XV 0x03
+ #define GLOBAL_CONTROL 0x1e
+ #define EXWRBK 0x04
+ #define IRQPM_EN 0x08
+ #define CLRPMIRQ 0x10
+
+#define IO_MAX_MAPS 2
+#define MEM_MAX_MAPS 5
+
+enum {
+ SLOTB_PROBE = 0,
+ SLOTB_NOPROBE_IO,
+ SLOTB_NOPROBE_MEM,
+ SLOTB_NOPROBE_ALL
+};
+
+typedef struct vrc4171_socket {
+ int noprobe;
+ void (*handler)(void *, unsigned int);
+ void *info;
+ socket_cap_t cap;
+ spinlock_t event_lock;
+ uint16_t events;
+ struct socket_info_t *pcmcia_socket;
+ struct tq_struct tq_task;
+ char name[24];
+ int csc_irq;
+ int io_irq;
+} vrc4171_socket_t;
+
+static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS];
+static int vrc4171_slotb = SLOTB_IS_NONE;
+static unsigned int vrc4171_irq;
+static uint16_t vrc4171_irq_mask = 0xdeb8;
+
+extern struct socket_info_t *pcmcia_register_socket(int slot,
+ struct pccard_operations *vtable,
+ int use_bus_pm);
+extern void pcmcia_unregister_socket(struct socket_info_t *s);
+
+static inline uint8_t exca_read_byte(int slot, uint8_t index)
+{
+ if (slot == CARD_SLOTB)
+ index += CARD_SLOTB_OFFSET;
+
+ outb(index, CARD_CONTROLLER_INDEX);
+ return inb(CARD_CONTROLLER_DATA);
+}
+
+static inline uint16_t exca_read_word(int slot, uint8_t index)
+{
+ uint16_t data;
+
+ if (slot == CARD_SLOTB)
+ index += CARD_SLOTB_OFFSET;
+
+ outb(index++, CARD_CONTROLLER_INDEX);
+ data = inb(CARD_CONTROLLER_DATA);
+
+ outb(index, CARD_CONTROLLER_INDEX);
+ data |= ((uint16_t)inb(CARD_CONTROLLER_DATA)) << 8;
+
+ return data;
+}
+
+static inline uint8_t exca_write_byte(int slot, uint8_t index, uint8_t data)
+{
+ if (slot == CARD_SLOTB)
+ index += CARD_SLOTB_OFFSET;
+
+ outb(index, CARD_CONTROLLER_INDEX);
+ outb(data, CARD_CONTROLLER_DATA);
+
+ return data;
+}
+
+static inline uint16_t exca_write_word(int slot, uint8_t index, uint16_t data)
+{
+ if (slot == CARD_SLOTB)
+ index += CARD_SLOTB_OFFSET;
+
+ outb(index++, CARD_CONTROLLER_INDEX);
+ outb(data, CARD_CONTROLLER_DATA);
+
+ outb(index, CARD_CONTROLLER_INDEX);
+ outb((uint8_t)(data >> 8), CARD_CONTROLLER_DATA);
+
+ return data;
+}
+
+static inline int search_nonuse_irq(void)
+{
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ if (vrc4171_irq_mask & (1 << i)) {
+ vrc4171_irq_mask &= ~(1 << i);
+ return i;
+ }
+ }
+
+ return -1;
+}
+
+static int pccard_init(unsigned int slot)
+{
+ vrc4171_socket_t *socket = &vrc4171_sockets[slot];
+
+ socket->cap.features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS;
+ socket->cap.irq_mask = 0;
+ socket->cap.pci_irq = vrc4171_irq;
+ socket->cap.map_size = 0x1000;
+ socket->events = 0;
+ spin_lock_init(socket->event_lock);
+ socket->csc_irq = search_nonuse_irq();
+ socket->io_irq = search_nonuse_irq();
+
+ return 0;
+}
+
+static int pccard_suspend(unsigned int slot)
+{
+ return -EINVAL;
+}
+
+static int pccard_register_callback(unsigned int slot,
+ void (*handler)(void *, unsigned int),
+ void *info)
+{
+ vrc4171_socket_t *socket;
+
+ if (slot >= CARD_MAX_SLOTS)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+
+ socket->handler = handler;
+ socket->info = info;
+
+ if (handler)
+ MOD_INC_USE_COUNT;
+ else
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+static int pccard_inquire_socket(unsigned int slot, socket_cap_t *cap)
+{
+ vrc4171_socket_t *socket;
+
+ if (slot >= CARD_MAX_SLOTS || cap == NULL)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+
+ *cap = socket->cap;
+
+ return 0;
+}
+
+static int pccard_get_status(unsigned int slot, u_int *value)
+{
+ uint8_t status, sense;
+ u_int val = 0;
+
+ if (slot >= CARD_MAX_SLOTS || value == NULL)
+ return -EINVAL;
+
+ status = exca_read_byte(slot, I365_STATUS);
+ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
+ if (status & I365_CS_STSCHG)
+ val |= SS_STSCHG;
+ } else {
+ if (!(status & I365_CS_BVD1))
+ val |= SS_BATDEAD;
+ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
+ val |= SS_BATWARN;
+ }
+ if ((status & I365_CS_DETECT) == I365_CS_DETECT)
+ val |= SS_DETECT;
+ if (status & I365_CS_WRPROT)
+ val |= SS_WRPROT;
+ if (status & I365_CS_READY)
+ val |= SS_READY;
+ if (status & I365_CS_POWERON)
+ val |= SS_POWERON;
+
+ sense = exca_read_byte(slot, CARD_VOLTAGE_SENSE);
+ switch (sense) {
+ case VCC_3VORXV_CAPABLE:
+ val |= SS_3VCARD | SS_XVCARD;
+ break;
+ case VCC_XV_ONLY:
+ val |= SS_XVCARD;
+ break;
+ case VCC_3V_CAPABLE:
+ val |= SS_3VCARD;
+ break;
+ default:
+ /* 5V only */
+ break;
+ }
+
+ *value = val;
+
+ return 0;
+}
+
+static inline u_char get_Vcc_value(uint8_t voltage)
+{
+ switch (voltage) {
+ case VCC_STATUS_3V:
+ return 33;
+ case VCC_STATUS_5V:
+ return 50;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static inline u_char get_Vpp_value(uint8_t power, u_char Vcc)
+{
+ if ((power & 0x03) == 0x01 || (power & 0x03) == 0x02)
+ return Vcc;
+
+ return 0;
+}
+
+static int pccard_get_socket(unsigned int slot, socket_state_t *state)
+{
+ vrc4171_socket_t *socket;
+ uint8_t power, voltage, control, cscint;
+
+ if (slot >= CARD_MAX_SLOTS || state == NULL)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+
+ power = exca_read_byte(slot, I365_POWER);
+ voltage = exca_read_byte(slot, CARD_VOLTAGE_SELECT);
+
+ state->Vcc = get_Vcc_value(voltage);
+ state->Vpp = get_Vpp_value(power, state->Vcc);
+
+ state->flags = 0;
+ if (power & POWER_ENABLE)
+ state->flags |= SS_PWR_AUTO;
+ if (power & I365_PWR_OUT)
+ state->flags |= SS_OUTPUT_ENA;
+
+ control = exca_read_byte(slot, I365_INTCTL);
+ if (control & I365_PC_IOCARD)
+ state->flags |= SS_IOCARD;
+ if (!(control & I365_PC_RESET))
+ state->flags |= SS_RESET;
+
+ cscint = exca_read_byte(slot, I365_CSCINT);
+ state->csc_mask = 0;
+ if (state->flags & SS_IOCARD) {
+ if (cscint & I365_CSC_STSCHG)
+ state->flags |= SS_STSCHG;
+ } else {
+ if (cscint & I365_CSC_BVD1)
+ state->csc_mask |= SS_BATDEAD;
+ if (cscint & I365_CSC_BVD2)
+ state->csc_mask |= SS_BATWARN;
+ }
+ if (cscint & I365_CSC_READY)
+ state->csc_mask |= SS_READY;
+ if (cscint & I365_CSC_DETECT)
+ state->csc_mask |= SS_DETECT;
+
+ return 0;
+}
+
+static inline uint8_t set_Vcc_value(u_char Vcc)
+{
+ switch (Vcc) {
+ case 33:
+ return VCC_3V;
+ case 50:
+ return VCC_5V;
+ }
+
+ /* Small voltage is chosen for safety. */
+ return VCC_3V;
+}
+
+static int pccard_set_socket(unsigned int slot, socket_state_t *state)
+{
+ vrc4171_socket_t *socket;
+ uint8_t voltage, power, control, cscint;
+
+ if (slot >= CARD_MAX_SLOTS ||
+ (state->Vpp != state->Vcc && state->Vpp != 0) ||
+ (state->Vcc != 50 && state->Vcc != 33 && state->Vcc != 0))
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+
+ spin_lock_irq(&socket->event_lock);
+
+ voltage = set_Vcc_value(state->Vcc);
+ exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage);
+
+ power = POWER_ENABLE;
+ if (state->Vpp == state->Vcc)
+ power |= VPP_GET_VCC;
+ if (state->flags & SS_OUTPUT_ENA)
+ power |= I365_PWR_OUT;
+ exca_write_byte(slot, I365_POWER, power);
+
+ control = 0;
+ if (state->io_irq != 0)
+ control |= socket->io_irq;
+ if (state->flags & SS_IOCARD)
+ control |= I365_PC_IOCARD;
+ if (state->flags & SS_RESET)
+ control &= ~I365_PC_RESET;
+ else
+ control |= I365_PC_RESET;
+ exca_write_byte(slot, I365_INTCTL, control);
+
+ cscint = 0;
+ exca_write_byte(slot, I365_CSCINT, cscint);
+ exca_read_byte(slot, I365_CSC); /* clear CardStatus change */
+ if (state->csc_mask != 0)
+ cscint |= socket->csc_irq << 8;
+ if (state->flags & SS_IOCARD) {
+ if (state->csc_mask & SS_STSCHG)
+ cscint |= I365_CSC_STSCHG;
+ } else {
+ if (state->csc_mask & SS_BATDEAD)
+ cscint |= I365_CSC_BVD1;
+ if (state->csc_mask & SS_BATWARN)
+ cscint |= I365_CSC_BVD2;
+ }
+ if (state->csc_mask & SS_READY)
+ cscint |= I365_CSC_READY;
+ if (state->csc_mask & SS_DETECT)
+ cscint |= I365_CSC_DETECT;
+ exca_write_byte(slot, I365_CSCINT, cscint);
+
+ spin_unlock_irq(&socket->event_lock);
+
+ return 0;
+}
+
+static int pccard_get_io_map(unsigned int slot, struct pccard_io_map *io)
+{
+ vrc4171_socket_t *socket;
+ uint8_t ioctl, addrwin;
+ u_char map;
+
+ if (slot >= CARD_MAX_SLOTS || io == NULL ||
+ io->map >= IO_MAX_MAPS)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+ map = io->map;
+
+ io->start = exca_read_word(slot, I365_IO(map)+I365_W_START);
+ io->stop = exca_read_word(slot, I365_IO(map)+I365_W_STOP);
+
+ ioctl = exca_read_byte(slot, I365_IOCTL);
+ if (io->flags & I365_IOCTL_WAIT(map))
+ io->speed = 1;
+ else
+ io->speed = 0;
+
+ io->flags = 0;
+ if (ioctl & I365_IOCTL_16BIT(map))
+ io->flags |= MAP_16BIT;
+ if (ioctl & I365_IOCTL_IOCS16(map))
+ io->flags |= MAP_AUTOSZ;
+ if (ioctl & I365_IOCTL_0WS(map))
+ io->flags |= MAP_0WS;
+
+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
+ if (addrwin & I365_ENA_IO(map))
+ io->flags |= MAP_ACTIVE;
+
+ return 0;
+}
+
+static int pccard_set_io_map(unsigned int slot, struct pccard_io_map *io)
+{
+ vrc4171_socket_t *socket;
+ uint8_t ioctl, addrwin;
+ u_char map;
+
+ if (slot >= CARD_MAX_SLOTS ||
+ io == NULL || io->map >= IO_MAX_MAPS ||
+ io->start > 0xffff || io->stop > 0xffff || io->start > io->stop)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+ map = io->map;
+
+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
+ if (addrwin & I365_ENA_IO(map)) {
+ addrwin &= ~I365_ENA_IO(map);
+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ }
+
+ exca_write_word(slot, I365_IO(map)+I365_W_START, io->start);
+ exca_write_word(slot, I365_IO(map)+I365_W_STOP, io->stop);
+
+ ioctl = 0;
+ if (io->speed > 0)
+ ioctl |= I365_IOCTL_WAIT(map);
+ if (io->flags & MAP_16BIT)
+ ioctl |= I365_IOCTL_16BIT(map);
+ if (io->flags & MAP_AUTOSZ)
+ ioctl |= I365_IOCTL_IOCS16(map);
+ if (io->flags & MAP_0WS)
+ ioctl |= I365_IOCTL_0WS(map);
+ exca_write_byte(slot, I365_IOCTL, ioctl);
+
+ if (io->flags & MAP_ACTIVE) {
+ addrwin |= I365_ENA_IO(map);
+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ }
+
+ return 0;
+}
+
+static int pccard_get_mem_map(unsigned int slot, struct pccard_mem_map *mem)
+{
+ vrc4171_socket_t *socket;
+ uint8_t addrwin;
+ u_long start, stop;
+ u_int offset;
+ u_char map;
+
+ if (slot >= CARD_MAX_SLOTS || mem == NULL || mem->map >= MEM_MAX_MAPS)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+ map = mem->map;
+
+ mem->flags = 0;
+ mem->speed = 0;
+
+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
+ if (addrwin & I365_ENA_MEM(map))
+ mem->flags |= MAP_ACTIVE;
+
+ start = exca_read_word(slot, I365_MEM(map)+I365_W_START);
+ if (start & I365_MEM_16BIT)
+ mem->flags |= MAP_16BIT;
+ mem->sys_start = (start & 0x3fffUL) << 12;
+
+ stop = exca_read_word(slot, I365_MEM(map)+I365_W_STOP);
+ if (start & I365_MEM_WS0)
+ mem->speed += 1;
+ if (start & I365_MEM_WS1)
+ mem->speed += 2;
+ mem->sys_stop = ((stop & 0x3fffUL) << 12) + 0xfffUL;
+
+ offset = exca_read_word(slot, I365_MEM(map)+I365_W_OFF);
+ if (offset & I365_MEM_REG)
+ mem->flags |= MAP_ATTRIB;
+ if (offset & I365_MEM_WRPROT)
+ mem->flags |= MAP_WRPROT;
+ mem->card_start = (offset & 0x3fffUL) << 12;
+
+ mem->sys_start += CARD_MEM_START;
+ mem->sys_stop += CARD_MEM_START;
+
+ return 0;
+}
+
+static int pccard_set_mem_map(unsigned int slot, struct pccard_mem_map *mem)
+{
+ vrc4171_socket_t *socket;
+ uint16_t start, stop, offset;
+ uint8_t addrwin;
+ u_char map;
+
+ if (slot >= CARD_MAX_SLOTS ||
+ mem == NULL || mem->map >= MEM_MAX_MAPS ||
+ mem->sys_start < CARD_MEM_START || mem->sys_start > CARD_MEM_END ||
+ mem->sys_stop < CARD_MEM_START || mem->sys_stop > CARD_MEM_END ||
+ mem->sys_start > mem->sys_stop ||
+ mem->card_start > CARD_MAX_MEM_OFFSET ||
+ mem->speed > CARD_MAX_MEM_SPEED)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+ map = mem->map;
+
+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
+ if (addrwin & I365_ENA_MEM(map)) {
+ addrwin &= ~I365_ENA_MEM(map);
+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ }
+
+ start = (mem->sys_start >> 12) & 0x3fff;
+ if (mem->flags & MAP_16BIT)
+ start |= I365_MEM_16BIT;
+ exca_write_word(slot, I365_MEM(map)+I365_W_START, start);
+
+ stop = (mem->sys_stop >> 12) & 0x3fff;
+ switch (mem->speed) {
+ case 0:
+ break;
+ case 1:
+ stop |= I365_MEM_WS0;
+ break;
+ case 2:
+ stop |= I365_MEM_WS1;
+ break;
+ default:
+ stop |= I365_MEM_WS0 | I365_MEM_WS1;
+ break;
+ }
+ exca_write_word(slot, I365_MEM(map)+I365_W_STOP, stop);
+
+ offset = (mem->card_start >> 12) & 0x3fff;
+ if (mem->flags & MAP_ATTRIB)
+ offset |= I365_MEM_REG;
+ if (mem->flags & MAP_WRPROT)
+ offset |= I365_MEM_WRPROT;
+ exca_write_word(slot, I365_MEM(map)+I365_W_OFF, offset);
+
+ if (mem->flags & MAP_ACTIVE) {
+ addrwin |= I365_ENA_MEM(map);
+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ }
+
+ return 0;
+}
+
+static void pccard_proc_setup(unsigned int slot, struct proc_dir_entry *base)
+{
+}
+
+static struct pccard_operations vrc4171_pccard_operations = {
+ .init = pccard_init,
+ .suspend = pccard_suspend,
+ .register_callback = pccard_register_callback,
+ .inquire_socket = pccard_inquire_socket,
+ .get_status = pccard_get_status,
+ .get_socket = pccard_get_socket,
+ .set_socket = pccard_set_socket,
+ .get_io_map = pccard_get_io_map,
+ .set_io_map = pccard_set_io_map,
+ .get_mem_map = pccard_get_mem_map,
+ .set_mem_map = pccard_set_mem_map,
+ .proc_setup = pccard_proc_setup,
+};
+
+static void pccard_bh(void *data)
+{
+ vrc4171_socket_t *socket = (vrc4171_socket_t *)data;
+ uint16_t events;
+
+ spin_lock_irq(&socket->event_lock);
+ events = socket->events;
+ socket->events = 0;
+ spin_unlock_irq(&socket->event_lock);
+
+ if (socket->handler)
+ socket->handler(socket->info, events);
+}
+
+static inline uint16_t get_events(int slot)
+{
+ uint16_t events = 0;
+ uint8_t status, csc;
+
+ status = exca_read_byte(slot, I365_STATUS);
+ csc = exca_read_byte(slot, I365_CSC);
+
+ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) {
+ if ((csc & I365_CSC_STSCHG) && (status & I365_CS_STSCHG))
+ events |= SS_STSCHG;
+ } else {
+ if (csc & (I365_CSC_BVD1 | I365_CSC_BVD2)) {
+ if (!(status & I365_CS_BVD1))
+ events |= SS_BATDEAD;
+ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1)
+ events |= SS_BATWARN;
+ }
+ }
+ if ((csc & I365_CSC_READY) && (status & I365_CS_READY))
+ events |= SS_READY;
+ if ((csc & I365_CSC_DETECT) && ((status & I365_CS_DETECT) == I365_CS_DETECT))
+ events |= SS_DETECT;
+
+ return events;
+}
+
+static void pccard_status_change(int slot, vrc4171_socket_t *socket)
+{
+ uint16_t events;
+
+ socket->tq_task.routine = pccard_bh;
+ socket->tq_task.data = socket;
+
+ events = get_events(slot);
+ if (events) {
+ spin_lock(&socket->event_lock);
+ socket->events |= events;
+ spin_unlock(&socket->event_lock);
+ schedule_task(&socket->tq_task);
+ }
+}
+
+static void pccard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ vrc4171_socket_t *socket;
+ uint16_t status;
+
+ status = vrc4171_get_irq_status();
+ if (status & IRQ_A) {
+ socket = &vrc4171_sockets[CARD_SLOTA];
+ if (socket->noprobe == SLOTB_PROBE) {
+ if (status & (1 << socket->csc_irq))
+ pccard_status_change(CARD_SLOTA, socket);
+ }
+ }
+
+ if (status & IRQ_B) {
+ socket = &vrc4171_sockets[CARD_SLOTB];
+ if (socket->noprobe == SLOTB_PROBE) {
+ if (status & (1 << socket->csc_irq))
+ pccard_status_change(CARD_SLOTB, socket);
+ }
+ }
+}
+
+static inline void reserve_using_irq(int slot)
+{
+ unsigned int irq;
+
+ irq = exca_read_byte(slot, I365_INTCTL);
+ irq &= 0x0f;
+ vrc4171_irq_mask &= ~(1 << irq);
+
+ irq = exca_read_byte(slot, I365_CSCINT);
+ irq = (irq & 0xf0) >> 4;
+ vrc4171_irq_mask &= ~(1 << irq);
+}
+
+static int __devinit vrc4171_add_socket(int slot)
+{
+ vrc4171_socket_t *socket;
+
+ if (slot >= CARD_MAX_SLOTS)
+ return -EINVAL;
+
+ socket = &vrc4171_sockets[slot];
+ if (socket->noprobe != SLOTB_PROBE) {
+ uint8_t addrwin;
+
+ switch (socket->noprobe) {
+ case SLOTB_NOPROBE_MEM:
+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
+ addrwin &= 0x1f;
+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ break;
+ case SLOTB_NOPROBE_IO:
+ addrwin = exca_read_byte(slot, I365_ADDRWIN);
+ addrwin &= 0xc0;
+ exca_write_byte(slot, I365_ADDRWIN, addrwin);
+ break;
+ default:
+ break;
+ }
+
+ reserve_using_irq(slot);
+
+ return 0;
+ }
+
+ sprintf(socket->name, "NEC VRC4171 Card Slot %1c", 'A' + slot);
+
+ socket->pcmcia_socket = pcmcia_register_socket(slot, &vrc4171_pccard_operations, 1);
+ if (socket->pcmcia_socket == NULL)
+ return -ENOMEM;
+
+ exca_write_byte(slot, I365_ADDRWIN, 0);
+
+ exca_write_byte(slot, GLOBAL_CONTROL, 0);
+
+ return 0;
+}
+
+static void vrc4171_remove_socket(int slot)
+{
+ vrc4171_socket_t *socket;
+
+ if (slot >= CARD_MAX_SLOTS)
+ return;
+
+ socket = &vrc4171_sockets[slot];
+
+ if (socket->pcmcia_socket != NULL) {
+ pcmcia_unregister_socket(socket->pcmcia_socket);
+ socket->pcmcia_socket = NULL;
+ }
+}
+
+static int __devinit vrc4171_card_setup(char *options)
+{
+ if (options == NULL || *options == '\0')
+ return 0;
+
+ if (strncmp(options, "irq:", 4) == 0) {
+ int irq;
+ options += 4;
+ irq = simple_strtoul(options, &options, 0);
+ if (irq >= 0 && irq < NR_IRQS)
+ vrc4171_irq = irq;
+
+ if (*options != ',')
+ return 0;
+ options++;
+ }
+
+ if (strncmp(options, "slota:", 6) == 0) {
+ options += 6;
+ if (*options != '\0') {
+ if (strncmp(options, "noprobe", 7) == 0) {
+ vrc4171_sockets[CARD_SLOTA].noprobe = 1;
+ options += 7;
+ }
+
+ if (*options != ',')
+ return 0;
+ options++;
+ } else
+ return 0;
+
+ }
+
+ if (strncmp(options, "slotb:", 6) == 0) {
+ options += 6;
+ if (*options != '\0') {
+ if (strncmp(options, "pccard", 6) == 0) {
+ vrc4171_slotb = SLOTB_IS_PCCARD;
+ options += 6;
+ } else if (strncmp(options, "cf", 2) == 0) {
+ vrc4171_slotb = SLOTB_IS_CF;
+ options += 2;
+ } else if (strncmp(options, "flashrom", 8) == 0) {
+ vrc4171_slotb = SLOTB_IS_FLASHROM;
+ options += 8;
+ } else if (strncmp(options, "none", 4) == 0) {
+ vrc4171_slotb = SLOTB_IS_NONE;
+ options += 4;
+ }
+
+ if (*options != ',')
+ return 0;
+ options++;
+
+ if ( strncmp(options, "memnoprobe", 10) == 0)
+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_MEM;
+ if ( strncmp(options, "ionoprobe", 9) == 0)
+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_IO;
+ if ( strncmp(options, "noprobe", 7) == 0)
+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_ALL;
+ }
+ }
+
+ return 0;
+}
+
+__setup("vrc4171_card=", vrc4171_card_setup);
+
+static int __devinit vrc4171_card_init(void)
+{
+ int retval, slot;
+
+ vrc4171_set_multifunction_pin(vrc4171_slotb);
+
+ if (request_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE,
+ "NEC VRC4171 Card Controller") == NULL)
+ return -EBUSY;
+
+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++) {
+ if (slot == CARD_SLOTB && vrc4171_slotb == SLOTB_IS_NONE)
+ break;
+
+ retval = vrc4171_add_socket(slot);
+ if (retval != 0)
+ return retval;
+ }
+
+ retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ,
+ "NEC VRC4171 Card Controller", vrc4171_sockets);
+ if (retval < 0) {
+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
+ vrc4171_remove_socket(slot);
+
+ return retval;
+ }
+
+ printk(KERN_INFO "NEC VRC4171 Card Controller, connected to IRQ %d\n", vrc4171_irq);
+
+ return 0;
+}
+
+static void __devexit vrc4171_card_exit(void)
+{
+ int slot;
+
+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++)
+ vrc4171_remove_socket(slot);
+
+ release_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE);
+}
+
+module_init(vrc4171_card_init);
+module_exit(vrc4171_card_exit);
Index: linux-2.4.35.4/drivers/scsi/NCR53C9x.h
===================================================================
--- linux-2.4.35.4.orig/drivers/scsi/NCR53C9x.h
+++ linux-2.4.35.4/drivers/scsi/NCR53C9x.h
@@ -144,12 +144,7 @@
#ifndef MULTIPLE_PAD_SIZES
-#ifdef CONFIG_CPU_HAS_WB
-#include <asm/wbflush.h>
-#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0)
-#else
-#define esp_write(__reg, __val) ((__reg) = (__val))
-#endif
+#define esp_write(__reg, __val) do{(__reg) = (__val); iob();} while(0)
#define esp_read(__reg) (__reg)
struct ESP_regs {
Index: linux-2.4.35.4/drivers/sound/au1550_i2s.c
===================================================================
--- linux-2.4.35.4.orig/drivers/sound/au1550_i2s.c
+++ linux-2.4.35.4/drivers/sound/au1550_i2s.c
@@ -41,6 +41,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
#include <linux/version.h>
#include <linux/module.h>
#include <linux/string.h>
@@ -62,7 +63,45 @@
#include <asm/uaccess.h>
#include <asm/hardirq.h>
#include <asm/au1000.h>
+
+#if defined(CONFIG_SOC_AU1550)
#include <asm/pb1550.h>
+#endif
+
+#if defined(CONFIG_MIPS_PB1200)
+#define WM8731
+#define WM_MODE_USB
+#include <asm/pb1200.h>
+#endif
+
+#if defined(CONFIG_MIPS_FICMMP)
+#define WM8721
+#define WM_MODE_NORMAL
+#include <asm/ficmmp.h>
+#endif
+
+
+#define WM_VOLUME_MIN 47
+#define WM_VOLUME_SCALE 80
+
+#if defined(WM8731)
+ /* OSS interface to the wm i2s.. */
+ #define CODEC_NAME "Wolfson WM8731 I2S"
+ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM | SOUND_MASK_LINE)
+ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK | SOUND_MASK_MIC)
+ #define WM_I2S_RECORD_MASK (SOUND_MASK_MIC | SOUND_MASK_LINE1 | SOUND_MASK_LINE)
+#elif defined(WM8721)
+ #define CODEC_NAME "Wolfson WM8721 I2S"
+ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM)
+ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK)
+ #define WM_I2S_RECORD_MASK (0)
+#endif
+
+
+#define supported_mixer(FOO) ((FOO >= 0) && \
+ (FOO < SOUND_MIXER_NRDEVICES) && \
+ WM_I2S_SUPPORTED_MASK & (1<<FOO) )
+
#include <asm/au1xxx_psc.h>
#include <asm/au1xxx_dbdma.h>
@@ -98,13 +137,51 @@
* 0 = no VRA, 1 = use VRA if codec supports it
* The framework is here, but we currently force no VRA.
*/
+#if defined(CONFIG_MIPS_PB1200) | defined(CONFIG_MIPS_PB1550)
static int vra = 0;
+#elif defined(CONFIG_MIPS_FICMMP)
+static int vra = 1;
+#endif
+
+#define WM_REG_L_HEADPHONE_OUT 0x02
+#define WM_REG_R_HEADPHONE_OUT 0x03
+#define WM_REG_ANALOGUE_AUDIO_PATH_CTRL 0x04
+#define WM_REG_DIGITAL_AUDIO_PATH_CTRL 0x05
+#define WM_REG_POWER_DOWN_CTRL 0x06
+#define WM_REG_DIGITAL_AUDIO_IF 0x07
+#define WM_REG_SAMPLING_CONTROL 0x08
+#define WM_REG_ACTIVE_CTRL 0x09
+#define WM_REG_RESET 0x0F
+#define WM_SC_SR_96000 (0x7<<2)
+#define WM_SC_SR_88200 (0xF<<2)
+#define WM_SC_SR_48000 (0x0<<2)
+#define WM_SC_SR_44100 (0x8<<2)
+#define WM_SC_SR_32000 (0x6<<2)
+#define WM_SC_SR_8018 (0x9<<2)
+#define WM_SC_SR_8000 (0x1<<2)
+#define WM_SC_MODE_USB 1
+#define WM_SC_MODE_NORMAL 0
+#define WM_SC_BOSR_250FS (0<<1)
+#define WM_SC_BOSR_272FS (1<<1)
+#define WM_SC_BOSR_256FS (0<<1)
+#define WM_SC_BOSR_128FS (0<<1)
+#define WM_SC_BOSR_384FS (1<<1)
+#define WM_SC_BOSR_192FS (1<<1)
+
+#define WS_64FS 31
+#define WS_96FS 47
+#define WS_128FS 63
+#define WS_192FS 95
+
+#define MIN_Q_COUNT 2
+
MODULE_PARM(vra, "i");
MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it");
static struct au1550_state {
/* soundcore stuff */
int dev_audio;
+ int dev_mixer;
spinlock_t lock;
struct semaphore open_sem;
@@ -114,6 +191,11 @@ static struct au1550_state {
int no_vra;
volatile psc_i2s_t *psc_addr;
+ int level_line;
+ int level_mic;
+ int level_left;
+ int level_right;
+
struct dmabuf {
u32 dmanr;
unsigned sample_rate;
@@ -195,60 +277,224 @@ au1550_delay(int msec)
}
}
-/* Just a place holder. The Wolfson codec is a write only device,
- * so we would have to keep a local copy of the data.
- */
-#if 0
-static u8
-rdcodec(u8 addr)
-{
- return 0 /* data */;
-}
-#endif
-
-
static void
-wrcodec(u8 ctlreg, u8 val)
+wrcodec(u8 ctlreg, u16 val)
{
int rcnt;
extern int pb1550_wm_codec_write(u8 addr, u8 reg, u8 val);
-
/* The codec is a write only device, with a 16-bit control/data
* word. Although it is written as two bytes on the I2C, the
* format is actually 7 bits of register and 9 bits of data.
* The ls bit of the first byte is the ms bit of the data.
*/
rcnt = 0;
- while ((pb1550_wm_codec_write((0x36 >> 1), ctlreg, val) != 1)
- && (rcnt < 50)) {
+ while ((pb1550_wm_codec_write((0x36 >> 1),
+ (ctlreg << 1) | ((val >> 8) & 0x01),
+ (u8) (val & 0x00FF)) != 1) &&
+ (rcnt < 50)) {
rcnt++;
-#if 0
- printk("Codec write retry %02x %02x\n", ctlreg, val);
-#endif
}
+
+ au1550_delay(10);
+}
+
+static int
+au1550_open_mixdev(struct inode *inode, struct file *file)
+{
+ file->private_data = &au1550_state;
+ return 0;
+}
+
+static int
+au1550_release_mixdev(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static int wm_i2s_read_mixer(struct au1550_state *s, int oss_channel)
+{
+ int ret = 0;
+
+ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
+ /* nice stereo mixers .. */
+
+ ret = s->level_left | (s->level_right << 8);
+ } else if (oss_channel == SOUND_MIXER_MIC) {
+ ret = 0;
+ /* TODO: Implement read mixer for input/output codecs */
+ }
+
+ return ret;
}
+static void wm_i2s_write_mixer(struct au1550_state *s, int oss_channel, unsigned int left, unsigned int right)
+{
+ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) {
+ /* stereo mixers */
+ s->level_left = left;
+ s->level_right = right;
+
+ right = (right * WM_VOLUME_SCALE) / 100;
+ left = (left * WM_VOLUME_SCALE) / 100;
+ if (right > WM_VOLUME_SCALE)
+ right = WM_VOLUME_SCALE;
+ if (left > WM_VOLUME_SCALE)
+ left = WM_VOLUME_SCALE;
+
+ right += WM_VOLUME_MIN;
+ left += WM_VOLUME_MIN;
+
+ wrcodec(WM_REG_L_HEADPHONE_OUT, left);
+ wrcodec(WM_REG_R_HEADPHONE_OUT, right);
+
+ }else if (oss_channel == SOUND_MIXER_MIC) {
+ /* TODO: implement write mixer for input/output codecs */
+ }
+}
+
+/* a thin wrapper for write_mixer */
+static void wm_i2s_set_mixer(struct au1550_state *s, unsigned int oss_mixer, unsigned int val )
+{
+ unsigned int left,right;
+
+ /* cleanse input a little */
+ right = ((val >> 8) & 0xff) ;
+ left = (val & 0xff) ;
+
+ if (right > 100) right = 100;
+ if (left > 100) left = 100;
+
+ wm_i2s_write_mixer(s, oss_mixer, left, right);
+}
+
+static int
+au1550_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct au1550_state *s = (struct au1550_state *)file->private_data;
+
+ int i, val = 0;
+
+ if (cmd == SOUND_MIXER_INFO) {
+ mixer_info info;
+ strncpy(info.id, CODEC_NAME, sizeof(info.id));
+ strncpy(info.name, CODEC_NAME, sizeof(info.name));
+ info.modify_counter = 0;
+ if (copy_to_user((void *)arg, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ }
+ if (cmd == SOUND_OLD_MIXER_INFO) {
+ _old_mixer_info info;
+ strncpy(info.id, CODEC_NAME, sizeof(info.id));
+ strncpy(info.name, CODEC_NAME, sizeof(info.name));
+ if (copy_to_user((void *)arg, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ }
+
+ if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
+ return -EINVAL;
+
+ if (cmd == OSS_GETVERSION)
+ return put_user(SOUND_VERSION, (int *)arg);
+
+ if (_SIOC_DIR(cmd) == _SIOC_READ) {
+ switch (_IOC_NR(cmd)) {
+ case SOUND_MIXER_RECSRC: /* give them the current record src */
+ val = 0;
+ /*
+ if (!codec->recmask_io) {
+ val = 0;
+ } else {
+ val = codec->recmask_io(codec, 1, 0);
+ }*/
+ break;
+
+ case SOUND_MIXER_DEVMASK: /* give them the supported mixers */
+ val = WM_I2S_SUPPORTED_MASK;
+ break;
+
+ case SOUND_MIXER_RECMASK:
+ /* Arg contains a bit for each supported recording
+ * source */
+ val = WM_I2S_RECORD_MASK;
+ break;
+
+ case SOUND_MIXER_STEREODEVS:
+ /* Mixer channels supporting stereo */
+ val = WM_I2S_STEREO_MASK;
+ break;
+
+ case SOUND_MIXER_CAPS:
+ val = SOUND_CAP_EXCL_INPUT;
+ break;
+
+ default: /* read a specific mixer */
+ i = _IOC_NR(cmd);
+
+ if (!supported_mixer(i))
+ return -EINVAL;
+
+ val = wm_i2s_read_mixer(s, i);
+ break;
+ }
+ return put_user(val, (int *)arg);
+ }
+
+ if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) {
+ if (get_user(val, (int *)arg))
+ return -EFAULT;
+
+ switch (_IOC_NR(cmd)) {
+ case SOUND_MIXER_RECSRC:
+ /* Arg contains a bit for each recording source */
+ if (!WM_I2S_RECORD_MASK)
+ return -EINVAL;
+ if (!val)
+ return 0;
+ if (!(val &= WM_I2S_RECORD_MASK))
+ return -EINVAL;
+
+ return 0;
+ default: /* write a specific mixer */
+ i = _IOC_NR(cmd);
+
+ if (!supported_mixer(i))
+ return -EINVAL;
+
+ wm_i2s_set_mixer(s, i, val);
+
+ return 0;
+ }
+}
+ return -EINVAL;
+}
+
+static loff_t
+au1550_llseek(struct file *file, loff_t offset, int origin)
+{
+ return -ESPIPE;
+}
+
+static /*const */ struct file_operations au1550_mixer_fops = {
+ owner:THIS_MODULE,
+ llseek:au1550_llseek,
+ ioctl:au1550_ioctl_mixdev,
+ open:au1550_open_mixdev,
+ release:au1550_release_mixdev,
+};
+
void
-codec_init(void)
+codec_init(struct au1550_state *s)
{
- wrcodec(0x1e, 0x00); /* Reset */
- au1550_delay(200);
- wrcodec(0x0c, 0x00); /* Power up everything */
- au1550_delay(10);
- wrcodec(0x12, 0x00); /* Deactivate codec */
- au1550_delay(10);
- wrcodec(0x08, 0x10); /* Select DAC outputs to line out */
- au1550_delay(10);
- wrcodec(0x0a, 0x00); /* Disable output mute */
- au1550_delay(10);
- wrcodec(0x05, 0x70); /* lower output volume on headphone */
- au1550_delay(10);
- wrcodec(0x0e, 0x02); /* Set slave, 16-bit, I2S modes */
- au1550_delay(10);
- wrcodec(0x10, 0x01); /* 12MHz (USB), 250fs */
- au1550_delay(10);
- wrcodec(0x12, 0x01); /* Activate codec */
- au1550_delay(10);
+ wrcodec(WM_REG_RESET, 0x00); /* Reset */
+ wrcodec(WM_REG_POWER_DOWN_CTRL, 0x00); /* Power up everything */
+ wrcodec(WM_REG_ACTIVE_CTRL, 0x00); /* Deactivate codec */
+ wrcodec(WM_REG_ANALOGUE_AUDIO_PATH_CTRL, 0x10); /* Select DAC outputs to line out */
+ wrcodec(WM_REG_DIGITAL_AUDIO_PATH_CTRL, 0x00); /* Disable output mute */
+ wm_i2s_write_mixer(s, SOUND_MIXER_PCM, 74, 74);
+ wrcodec(WM_REG_DIGITAL_AUDIO_IF, 0x02); /* Set slave, 16-bit, I2S modes */
+ wrcodec(WM_REG_ACTIVE_CTRL, 0x01); /* Activate codec */
}
/* stop the ADC before calling */
@@ -256,27 +502,16 @@ static void
set_adc_rate(struct au1550_state *s, unsigned rate)
{
struct dmabuf *adc = &s->dma_adc;
- struct dmabuf *dac = &s->dma_dac;
- if (s->no_vra) {
- /* calc SRC factor
- */
+ #if defined(WM_MODE_USB)
adc->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
adc->sample_rate = SAMP_RATE / adc->src_factor;
return;
- }
+ #else
+ //TODO: Need code for normal mode
+ #endif
adc->src_factor = 1;
-
-
-#if 0
- rate = rate > SAMP_RATE ? SAMP_RATE : rate;
-
- wrcodec(0, 0); /* I don't yet know what to write here if we vra */
-
- adc->sample_rate = rate;
- dac->sample_rate = rate;
-#endif
}
/* stop the DAC before calling */
@@ -284,26 +519,89 @@ static void
set_dac_rate(struct au1550_state *s, unsigned rate)
{
struct dmabuf *dac = &s->dma_dac;
- struct dmabuf *adc = &s->dma_adc;
- if (s->no_vra) {
- /* calc SRC factor
- */
- dac->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1;
- dac->sample_rate = SAMP_RATE / dac->src_factor;
- return;
+ u16 sr, ws, div, bosr, mode;
+ volatile psc_i2s_t* ip = (volatile psc_i2s_t *)I2S_PSC_BASE;
+ u32 cfg;
+
+ #if defined(CONFIG_MIPS_FICMMP)
+ rate = ficmmp_set_i2s_sample_rate(rate);
+ #endif
+
+ switch(rate)
+ {
+ case 96000:
+ sr = WM_SC_SR_96000;
+ ws = WS_64FS;
+ div = PSC_I2SCFG_DIV2;
+ break;
+ case 88200:
+ sr = WM_SC_SR_88200;
+ ws = WS_64FS;
+ div = PSC_I2SCFG_DIV2;
+ break;
+ case 44100:
+ sr = WM_SC_SR_44100;
+ ws = WS_128FS;
+ div = PSC_I2SCFG_DIV2;
+ break;
+ case 48000:
+ sr = WM_SC_SR_48000;
+ ws = WS_128FS;
+ div = PSC_I2SCFG_DIV2;
+ break;
+ case 32000:
+ sr = WM_SC_SR_32000;
+ ws = WS_96FS;
+ div = PSC_I2SCFG_DIV4;
+ break;
+ case 8018:
+ sr = WM_SC_SR_8018;
+ ws = WS_128FS;
+ div = PSC_I2SCFG_DIV2;
+ break;
+ case 8000:
+ default:
+ sr = WM_SC_SR_8000;
+ ws = WS_96FS;
+ div = PSC_I2SCFG_DIV16;
+ break;
}
+ #if defined(WM_MODE_USB)
+ mode = WM_SC_MODE_USB;
+ #else
+ mode = WM_SC_MODE_NORMAL;
+ #endif
+
+ bosr = 0;
+
dac->src_factor = 1;
+ dac->sample_rate = rate;
-#if 0
- rate = rate > SAMP_RATE ? SAMP_RATE : rate;
+ /* Deactivate codec */
+ wrcodec(WM_REG_ACTIVE_CTRL, 0x00);
- wrcodec(0, 0); /* I don't yet know what to write here if we vra */
+ /* Disable I2S controller */
+ ip->psc_i2scfg &= ~PSC_I2SCFG_DE_ENABLE;
+ /* Wait for device disabled */
+ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 1);
+
+ cfg = ip->psc_i2scfg;
+ /* Clear WS and DIVIDER values */
+ cfg &= ~(PSC_I2SCFG_WS_MASK | PSC_I2SCFG_DIV_MASK);
+ cfg |= PSC_I2SCFG_WS(ws) | div;
+ /* Reconfigure and enable */
+ ip->psc_i2scfg = cfg | PSC_I2SCFG_DE_ENABLE;
- adc->sample_rate = rate;
- dac->sample_rate = rate;
-#endif
+ /* Wait for device enabled */
+ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 0);
+
+ /* Set appropriate sampling rate */
+ wrcodec(WM_REG_SAMPLING_CONTROL, bosr | mode | sr);
+
+ /* Activate codec */
+ wrcodec(WM_REG_ACTIVE_CTRL, 0x01);
}
static void
@@ -354,8 +652,7 @@ stop_adc(struct au1550_state *s)
ip->psc_i2spcr = PSC_I2SPCR_RP;
au_sync();
- /* Wait for Receive Busy to show disabled.
- */
+ /* Wait for Receive Busy to show disabled. */
do {
stat = ip->psc_i2sstat;
au_sync();
@@ -463,7 +760,6 @@ prog_dmabuf(struct au1550_state *s, stru
if (db->num_channels == 1)
db->cnt_factor *= 2;
db->cnt_factor *= db->src_factor;
-
db->count = 0;
db->dma_qcount = 0;
db->nextIn = db->nextOut = db->rawbuf;
@@ -546,12 +842,13 @@ dac_dma_interrupt(int irq, void *dev_id,
if (i2s_stat & (PSC_I2SSTAT_TF | PSC_I2SSTAT_TR | PSC_I2SSTAT_TF))
dbg("I2S status = 0x%08x", i2s_stat);
#endif
+
db->dma_qcount--;
if (db->count >= db->fragsize) {
- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
- db->fragsize) == 0) {
- err("qcount < 2 and no ring room!");
+ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0)
+ {
+ err("qcount < MIN_Q_COUNT and no ring room!");
}
db->nextOut += db->fragsize;
if (db->nextOut >= db->rawbuf + db->dmasize)
@@ -606,65 +903,43 @@ adc_dma_interrupt(int irq, void *dev_id,
}
-static loff_t
-au1550_llseek(struct file *file, loff_t offset, int origin)
-{
- return -ESPIPE;
-}
-
-
-#if 0
-static int
-au1550_open_mixdev(struct inode *inode, struct file *file)
-{
- file->private_data = &au1550_state;
- return 0;
-}
-
-static int
-au1550_release_mixdev(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int
-mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd,
- unsigned long arg)
-{
- return codec->mixer_ioctl(codec, cmd, arg);
-}
-
-static int
-au1550_ioctl_mixdev(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct au1550_state *s = (struct au1550_state *)file->private_data;
- struct ac97_codec *codec = s->codec;
-
- return mixdev_ioctl(codec, cmd, arg);
-}
-
-static /*const */ struct file_operations au1550_mixer_fops = {
- owner:THIS_MODULE,
- llseek:au1550_llseek,
- ioctl:au1550_ioctl_mixdev,
- open:au1550_open_mixdev,
- release:au1550_release_mixdev,
-};
-#endif
-
static int
drain_dac(struct au1550_state *s, int nonblock)
{
unsigned long flags;
int count, tmo;
+ struct dmabuf *db = &s->dma_dac;
+
+ //DPRINTF();
if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped)
return 0;
for (;;) {
spin_lock_irqsave(&s->lock, flags);
- count = s->dma_dac.count;
+ count = db->count;
+
+ /* Pad the ddma buffer with zeros if the amount remaining
+ * is not a multiple of fragsize */
+ if(count % db->fragsize != 0)
+ {
+ int pad = db->fragsize - (count % db->fragsize);
+ char* bufptr = db->nextIn;
+ char* bufend = db->rawbuf + db->dmasize;
+
+ if((bufend - bufptr) < pad)
+ printk("Error! ddma padding is bigger than available ring space!\n");
+ else
+ {
+ memset((void*)bufptr, 0, pad);
+ count += pad;
+ db->nextIn += pad;
+ db->count += pad;
+ if (db->dma_qcount == 0)
+ start_dac(s);
+ db->dma_qcount++;
+ }
+ }
spin_unlock_irqrestore(&s->lock, flags);
if (count <= 0)
break;
@@ -672,9 +947,9 @@ drain_dac(struct au1550_state *s, int no
break;
if (nonblock)
return -EBUSY;
- tmo = 1000 * count / (s->no_vra ?
- SAMP_RATE : s->dma_dac.sample_rate);
+ tmo = 1000 * count / s->dma_dac.sample_rate;
tmo /= s->dma_dac.dma_bytes_per_sample;
+
au1550_delay(tmo);
}
if (signal_pending(current))
@@ -698,8 +973,7 @@ static inline s16 U8_TO_S16(u8 ch)
* If interpolating (no VRA), duplicate every audio frame src_factor times.
*/
static int
-translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf,
- int dmacount)
+translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, int dmacount)
{
int sample, i;
int interp_bytes_per_sample;
@@ -737,11 +1011,12 @@ translate_from_user(struct dmabuf *db, c
/* duplicate every audio frame src_factor times
*/
- for (i = 0; i < db->src_factor; i++)
+ for (i = 0; i < db->src_factor; i++) {
memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
+ dmabuf += interp_bytes_per_sample;
+ }
userbuf += db->user_bytes_per_sample;
- dmabuf += interp_bytes_per_sample;
}
return num_samples * interp_bytes_per_sample;
@@ -996,15 +1271,14 @@ au1550_write(struct file *file, const ch
* on the dma queue. If the queue count reaches zero,
* we know the dma has stopped.
*/
- while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
+ while ((db->dma_qcount < MIN_Q_COUNT) && (db->count >= db->fragsize)) {
if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
db->fragsize) == 0) {
- err("qcount < 2 and no ring room!");
+ err("qcount < MIN_Q_COUNT and no ring room!");
}
db->nextOut += db->fragsize;
if (db->nextOut >= db->rawbuf + db->dmasize)
db->nextOut -= db->dmasize;
- db->count -= db->fragsize;
db->total_bytes += db->dma_fragsize;
if (db->dma_qcount == 0)
start_dac(s);
@@ -1017,7 +1291,6 @@ au1550_write(struct file *file, const ch
buffer += usercnt;
ret += usercnt;
} /* while (count > 0) */
-
out:
up(&s->sem);
out2:
@@ -1371,9 +1644,6 @@ au1550_ioctl(struct inode *inode, struct
s->dma_dac.cnt_factor;
abinfo.fragstotal = s->dma_dac.numfrag;
abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
-#ifdef AU1000_VERBOSE_DEBUG
- dbg("bytes=%d, fragments=%d", abinfo.bytes, abinfo.fragments);
-#endif
return copy_to_user((void *) arg, &abinfo,
sizeof(abinfo)) ? -EFAULT : 0;
@@ -1536,13 +1806,9 @@ au1550_ioctl(struct inode *inode, struct
case SNDCTL_DSP_SETSYNCRO:
case SOUND_PCM_READ_FILTER:
return -EINVAL;
+ default: break;
}
-
-#if 0
- return mixdev_ioctl(s->codec, cmd, arg);
-#else
return 0;
-#endif
}
@@ -1664,15 +1930,15 @@ static /*const */ struct file_operations
MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com");
MODULE_DESCRIPTION("Au1550 Audio Driver");
+#if defined(WM_MODE_USB)
/* Set up an internal clock for the PSC3. This will then get
* driven out of the Au1550 as the master.
*/
static void
intclk_setup(void)
{
- uint clk, rate, stat;
-
- /* Wire up Freq4 as a clock for the PSC3.
+ uint clk, rate;
+ /* Wire up Freq4 as a clock for the PSC.
* We know SMBus uses Freq3.
* By making changes to this rate, plus the word strobe
* size, we can make fine adjustments to the actual data rate.
@@ -1700,11 +1966,17 @@ intclk_setup(void)
*/
clk = au_readl(SYS_CLKSRC);
au_sync();
+#if defined(CONFIG_SOC_AU1550)
clk &= ~0x01f00000;
clk |= (6 << 22);
+#elif defined(CONFIG_SOC_AU1200)
+ clk &= ~0x3e000000;
+ clk |= (6 << 27);
+#endif
au_writel(clk, SYS_CLKSRC);
au_sync();
}
+#endif
static int __devinit
au1550_probe(void)
@@ -1724,6 +1996,11 @@ au1550_probe(void)
init_MUTEX(&s->open_sem);
spin_lock_init(&s->lock);
+ /* CPLD Mux for I2s */
+
+#if defined(CONFIG_MIPS_PB1200)
+ bcsr->resets |= BCSR_RESETS_PCS1MUX;
+#endif
s->psc_addr = (volatile psc_i2s_t *)I2S_PSC_BASE;
ip = s->psc_addr;
@@ -1765,9 +2042,8 @@ au1550_probe(void)
if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0)
goto err_dev1;
-#if 0
- if ((s->codec->dev_mixer =
- register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
+#if 1
+ if ((s->dev_mixer = register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
goto err_dev2;
#endif
@@ -1777,7 +2053,6 @@ au1550_probe(void)
proc_au1550_dump, NULL);
#endif /* AU1550_DEBUG */
- intclk_setup();
/* The GPIO for the appropriate PSC was configured by the
* board specific start up.
@@ -1786,7 +2061,12 @@ au1550_probe(void)
*/
ip->psc_ctrl = PSC_CTRL_DISABLE; /* Disable PSC */
au_sync();
+#if defined(WM_MODE_USB)
+ intclk_setup();
ip->psc_sel = (PSC_SEL_CLK_INTCLK | PSC_SEL_PS_I2SMODE);
+#else
+ ip->psc_sel = (PSC_SEL_CLK_EXTCLK | PSC_SEL_PS_I2SMODE);
+#endif
au_sync();
/* Enable PSC
@@ -1806,42 +2086,18 @@ au1550_probe(void)
* Actual I2S mode (first bit delayed by one clock).
* Master mode (We provide the clock from the PSC).
*/
- val = PSC_I2SCFG_SET_LEN(16);
-#ifdef TRY_441KHz
- /* This really should be 250, but it appears that all of the
- * PLLs, dividers and so on in the chain shift it. That's the
- * problem with sourceing the clock instead of letting the very
- * stable codec provide it. But, the PSC doesn't appear to want
- * to work in slave mode, so this is what we get. It's not
- * studio quality timing, but it's good enough for listening
- * to mp3s.
- */
- val |= PSC_I2SCFG_SET_WS(252);
-#else
- val |= PSC_I2SCFG_SET_WS(250);
-#endif
- val |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
+
+ val = PSC_I2SCFG_SET_LEN(16) | PSC_I2SCFG_WS(WS_128FS) | PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \
PSC_I2SCFG_BI | PSC_I2SCFG_XM;
- ip->psc_i2scfg = val;
- au_sync();
- val |= PSC_I2SCFG_DE_ENABLE;
- ip->psc_i2scfg = val;
- au_sync();
+ ip->psc_i2scfg = val | PSC_I2SCFG_DE_ENABLE;
- /* Wait for Device ready.
- */
- do {
- val = ip->psc_i2sstat;
- au_sync();
- } while ((val & PSC_I2SSTAT_DR) == 0);
+ set_dac_rate(s, 8000); //Set default rate
- val = ip->psc_i2scfg;
- au_sync();
+ codec_init(s);
- codec_init();
+ s->no_vra = vra ? 0 : 1;
- s->no_vra = 1;
if (s->no_vra)
info("no VRA, interpolating and decimating");
@@ -1866,6 +2122,8 @@ au1550_probe(void)
err_dev2:
unregister_sound_dsp(s->dev_audio);
#endif
+ err_dev2:
+ unregister_sound_dsp(s->dev_audio);
err_dev1:
au1xxx_dbdma_chan_free(s->dma_adc.dmanr);
err_dma2:
Index: linux-2.4.35.4/drivers/sound/au1550_psc.c
===================================================================
--- linux-2.4.35.4.orig/drivers/sound/au1550_psc.c
+++ linux-2.4.35.4/drivers/sound/au1550_psc.c
@@ -30,6 +30,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
+
#include <linux/version.h>
#include <linux/module.h>
#include <linux/string.h>
@@ -63,6 +64,14 @@
#include <asm/db1x00.h>
#endif
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/db1200.h>
+#endif
+
#undef OSS_DOCUMENTED_MIXER_SEMANTICS
#define AU1550_MODULE_NAME "Au1550 psc audio"
@@ -521,7 +530,14 @@ stop_adc(struct au1550_state *s)
spin_unlock_irqrestore(&s->lock, flags);
}
-
+/*
+ NOTE: The xmit slots cannot be changed on the fly when in full-duplex
+ because the AC'97 block must be stopped/started. When using this driver
+ in full-duplex (in & out at the same time), the DMA engine will stop if
+ you disable the block.
+ TODO: change implementation to properly restart adc/dac after setting
+ xmit slots.
+*/
static void
set_xmit_slots(int num_channels)
{
@@ -565,6 +581,14 @@ set_xmit_slots(int num_channels)
} while ((stat & PSC_AC97STAT_DR) == 0);
}
+/*
+ NOTE: The recv slots cannot be changed on the fly when in full-duplex
+ because the AC'97 block must be stopped/started. When using this driver
+ in full-duplex (in & out at the same time), the DMA engine will stop if
+ you disable the block.
+ TODO: change implementation to properly restart adc/dac after setting
+ recv slots.
+*/
static void
set_recv_slots(int num_channels)
{
@@ -608,7 +632,6 @@ start_dac(struct au1550_state *s)
spin_lock_irqsave(&s->lock, flags);
- set_xmit_slots(db->num_channels);
au_writel(PSC_AC97PCR_TC, PSC_AC97PCR);
au_sync();
au_writel(PSC_AC97PCR_TS, PSC_AC97PCR);
@@ -640,7 +663,6 @@ start_adc(struct au1550_state *s)
db->nextIn -= db->dmasize;
}
- set_recv_slots(db->num_channels);
au1xxx_dbdma_start(db->dmanr);
au_writel(PSC_AC97PCR_RC, PSC_AC97PCR);
au_sync();
@@ -752,12 +774,16 @@ dac_dma_interrupt(int irq, void *dev_id,
if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE))
dbg("AC97C status = 0x%08x", ac97c_stat);
#endif
+ /* There is a possiblity that we are getting 1 interrupt for
+ multiple descriptors. Use ddma api to find out how many
+ completed.
+ */
db->dma_qcount--;
if (db->count >= db->fragsize) {
if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
db->fragsize) == 0) {
- err("qcount < 2 and no ring room!");
+ err("qcount < 2 and no ring room1!");
}
db->nextOut += db->fragsize;
if (db->nextOut >= db->rawbuf + db->dmasize)
@@ -941,11 +967,12 @@ translate_from_user(struct dmabuf *db, c
/* duplicate every audio frame src_factor times
*/
- for (i = 0; i < db->src_factor; i++)
+ for (i = 0; i < db->src_factor; i++) {
memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
+ dmabuf += interp_bytes_per_sample;
+ }
userbuf += db->user_bytes_per_sample;
- dmabuf += interp_bytes_per_sample;
}
return num_samples * interp_bytes_per_sample;
@@ -1203,7 +1230,7 @@ au1550_write(struct file *file, const ch
while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut,
db->fragsize) == 0) {
- err("qcount < 2 and no ring room!");
+ err("qcount < 2 and no ring room!0");
}
db->nextOut += db->fragsize;
if (db->nextOut >= db->rawbuf + db->dmasize)
@@ -1481,6 +1508,7 @@ au1550_ioctl(struct inode *inode, struct
return -EINVAL;
stop_adc(s);
s->dma_adc.num_channels = val;
+ set_recv_slots(val);
if ((ret = prog_dmabuf_adc(s)))
return ret;
}
@@ -1538,6 +1566,7 @@ au1550_ioctl(struct inode *inode, struct
}
s->dma_dac.num_channels = val;
+ set_xmit_slots(val);
if ((ret = prog_dmabuf_dac(s)))
return ret;
}
@@ -1832,10 +1861,8 @@ au1550_open(struct inode *inode, struct
down(&s->open_sem);
}
- stop_dac(s);
- stop_adc(s);
-
if (file->f_mode & FMODE_READ) {
+ stop_adc(s);
s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
s->dma_adc.subdivision = s->dma_adc.total_bytes = 0;
s->dma_adc.num_channels = 1;
@@ -1846,6 +1873,7 @@ au1550_open(struct inode *inode, struct
}
if (file->f_mode & FMODE_WRITE) {
+ stop_dac(s);
s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
s->dma_dac.subdivision = s->dma_dac.total_bytes = 0;
s->dma_dac.num_channels = 1;
@@ -2091,6 +2119,9 @@ au1550_probe(void)
ac97_read_proc, &s->codec);
#endif
+ set_xmit_slots(1);
+ set_recv_slots(1);
+
return 0;
err_dev3:
Index: linux-2.4.35.4/drivers/sound/Config.in
===================================================================
--- linux-2.4.35.4.orig/drivers/sound/Config.in
+++ linux-2.4.35.4/drivers/sound/Config.in
@@ -72,10 +72,15 @@ fi
if [ "$CONFIG_DDB5477" = "y" ]; then
dep_tristate ' NEC Vrc5477 AC97 sound' CONFIG_SOUND_VRC5477 $CONFIG_SOUND
fi
-if [ "$CONFIG_SOC_AU1X00" = "y" -o "$CONFIG_SOC_AU1500" = "y" ]; then
- dep_tristate ' Au1x00 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND
- dep_tristate ' Au1550 PSC Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND
- dep_tristate ' Au1550 I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND
+if [ "$CONFIG_SOC_AU1000" = "y" -o \
+ "$CONFIG_SOC_AU1500" = "y" -o \
+ "$CONFIG_SOC_AU1100" = "y" ]; then
+ dep_tristate ' Au1x00 AC97 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND
+fi
+if [ "$CONFIG_SOC_AU1550" = "y" -o \
+ "$CONFIG_SOC_AU1200" = "y" ]; then
+ dep_tristate ' Au1550/Au1200 PSC AC97 Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND
+ dep_tristate ' Au1550/Au1200 PSC I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND
fi
dep_tristate ' Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core' CONFIG_SOUND_TRIDENT $CONFIG_SOUND $CONFIG_PCI
Index: linux-2.4.35.4/drivers/tc/lk201.c
===================================================================
--- linux-2.4.35.4.orig/drivers/tc/lk201.c
+++ linux-2.4.35.4/drivers/tc/lk201.c
@@ -5,7 +5,7 @@
* for more details.
*
* Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
- * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
+ * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki
*/
#include <linux/config.h>
@@ -23,8 +23,8 @@
#include <asm/keyboard.h>
#include <asm/dec/tc.h>
#include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
-#include "zs.h"
#include "lk201.h"
/*
@@ -55,19 +55,20 @@ unsigned char *kbd_sysrq_xlate = lk201_s
unsigned char kbd_sysrq_key = -1;
#endif
-#define KEYB_LINE 3
+#define KEYB_LINE_ZS 3
+#define KEYB_LINE_DZ 0
-static int __init lk201_init(struct dec_serial *);
-static void __init lk201_info(struct dec_serial *);
-static void lk201_kbd_rx_char(unsigned char, unsigned char);
+static int __init lk201_init(void *);
+static void __init lk201_info(void *);
+static void lk201_rx_char(unsigned char, unsigned char);
-struct zs_hook lk201_kbdhook = {
+static struct dec_serial_hook lk201_hook = {
.init_channel = lk201_init,
.init_info = lk201_info,
.rx_char = NULL,
.poll_rx_char = NULL,
.poll_tx_char = NULL,
- .cflags = B4800 | CS8 | CSTOPB | CLOCAL
+ .cflags = B4800 | CS8 | CSTOPB | CLOCAL,
};
/*
@@ -93,28 +94,28 @@ static unsigned char lk201_reset_string[
LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
};
-static struct dec_serial* lk201kbd_info;
+static void *lk201_handle;
-static int lk201_send(struct dec_serial *info, unsigned char ch)
+static int lk201_send(unsigned char ch)
{
- if (info->hook->poll_tx_char(info, ch)) {
+ if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
printk(KERN_ERR "lk201: transmit timeout\n");
return -EIO;
}
return 0;
}
-static inline int lk201_get_id(struct dec_serial *info)
+static inline int lk201_get_id(void)
{
- return lk201_send(info, LK_CMD_REQ_ID);
+ return lk201_send(LK_CMD_REQ_ID);
}
-static int lk201_reset(struct dec_serial *info)
+static int lk201_reset(void)
{
int i, r;
for (i = 0; i < sizeof(lk201_reset_string); i++) {
- r = lk201_send(info, lk201_reset_string[i]);
+ r = lk201_send(lk201_reset_string[i]);
if (r < 0)
return r;
}
@@ -203,24 +204,26 @@ static void parse_kbd_rate(struct kbd_re
static int write_kbd_rate(struct kbd_repeat *rep)
{
- struct dec_serial* info = lk201kbd_info;
int delay, rate;
int i;
delay = rep->delay / 5;
rate = rep->rate;
for (i = 0; i < 4; i++) {
- if (info->hook->poll_tx_char(info, LK_CMD_RPT_RATE(i)))
+ if (lk201_hook.poll_tx_char(lk201_handle,
+ LK_CMD_RPT_RATE(i)))
return 1;
- if (info->hook->poll_tx_char(info, LK_PARAM_DELAY(delay)))
+ if (lk201_hook.poll_tx_char(lk201_handle,
+ LK_PARAM_DELAY(delay)))
return 1;
- if (info->hook->poll_tx_char(info, LK_PARAM_RATE(rate)))
+ if (lk201_hook.poll_tx_char(lk201_handle,
+ LK_PARAM_RATE(rate)))
return 1;
}
return 0;
}
-static int lk201kbd_rate(struct kbd_repeat *rep)
+static int lk201_kbd_rate(struct kbd_repeat *rep)
{
if (rep == NULL)
return -EINVAL;
@@ -237,10 +240,8 @@ static int lk201kbd_rate(struct kbd_repe
return 0;
}
-static void lk201kd_mksound(unsigned int hz, unsigned int ticks)
+static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
{
- struct dec_serial* info = lk201kbd_info;
-
if (!ticks)
return;
@@ -253,20 +254,19 @@ static void lk201kd_mksound(unsigned int
ticks = 7;
ticks = 7 - ticks;
- if (info->hook->poll_tx_char(info, LK_CMD_ENB_BELL))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
return;
- if (info->hook->poll_tx_char(info, LK_PARAM_VOLUME(ticks)))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
return;
- if (info->hook->poll_tx_char(info, LK_CMD_BELL))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
return;
}
void kbd_leds(unsigned char leds)
{
- struct dec_serial* info = lk201kbd_info;
unsigned char l = 0;
- if (!info) /* FIXME */
+ if (!lk201_handle) /* FIXME */
return;
/* FIXME -- Only Hold and Lock LEDs for now. --macro */
@@ -275,13 +275,13 @@ void kbd_leds(unsigned char leds)
if (leds & LED_CAP)
l |= LK_LED_LOCK;
- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_ON))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
return;
- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(l)))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
return;
- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_OFF))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
return;
- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(~l)))
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
return;
}
@@ -307,7 +307,7 @@ char kbd_unexpected_up(unsigned char key
return 0x80;
}
-static void lk201_kbd_rx_char(unsigned char ch, unsigned char stat)
+static void lk201_rx_char(unsigned char ch, unsigned char fl)
{
static unsigned char id[6];
static int id_i;
@@ -316,9 +316,8 @@ static void lk201_kbd_rx_char(unsigned c
static int prev_scancode;
unsigned char c = scancodeRemap[ch];
- if (stat && stat != TTY_OVERRUN) {
- printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n",
- stat);
+ if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
+ printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
return;
}
@@ -335,7 +334,7 @@ static void lk201_kbd_rx_char(unsigned c
/* OK, the power-up concluded. */
lk201_report(id);
if (id[2] == LK_STAT_PWRUP_OK)
- lk201_get_id(lk201kbd_info);
+ lk201_get_id();
else {
id_i = 0;
printk(KERN_ERR "lk201: keyboard power-up "
@@ -345,7 +344,7 @@ static void lk201_kbd_rx_char(unsigned c
/* We got the ID; report it and start operation. */
id_i = 0;
lk201_id(id);
- lk201_reset(lk201kbd_info);
+ lk201_reset();
}
return;
}
@@ -398,29 +397,28 @@ static void lk201_kbd_rx_char(unsigned c
tasklet_schedule(&keyboard_tasklet);
}
-static void __init lk201_info(struct dec_serial *info)
+static void __init lk201_info(void *handle)
{
}
-static int __init lk201_init(struct dec_serial *info)
+static int __init lk201_init(void *handle)
{
/* First install handlers. */
- lk201kbd_info = info;
- kbd_rate = lk201kbd_rate;
- kd_mksound = lk201kd_mksound;
+ lk201_handle = handle;
+ kbd_rate = lk201_kbd_rate;
+ kd_mksound = lk201_kd_mksound;
- info->hook->rx_char = lk201_kbd_rx_char;
+ lk201_hook.rx_char = lk201_rx_char;
/* Then just issue a reset -- the handlers will do the rest. */
- lk201_send(info, LK_CMD_POWER_UP);
+ lk201_send(LK_CMD_POWER_UP);
return 0;
}
void __init kbd_init_hw(void)
{
- extern int register_zs_hook(unsigned int, struct zs_hook *);
- extern int unregister_zs_hook(unsigned int);
+ int keyb_line;
/* Maxine uses LK501 at the Access.Bus. */
if (!LK_IFACE)
@@ -428,19 +426,15 @@ void __init kbd_init_hw(void)
printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
- if (LK_IFACE_ZS) {
- /*
- * kbd_init_hw() is being called before
- * rs_init() so just register the kbd hook
- * and let zs_init do the rest :-)
- */
- if(!register_zs_hook(KEYB_LINE, &lk201_kbdhook))
- unregister_zs_hook(KEYB_LINE);
- } else {
- /*
- * TODO: modify dz.c to allow similar hooks
- * for LK201 handling on DS2100, DS3100, and DS5000/200
- */
- printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
- }
+ /*
+ * kbd_init_hw() is being called before
+ * rs_init() so just register the kbd hook
+ * and let zs_init do the rest :-)
+ */
+ if (LK_IFACE_ZS)
+ keyb_line = KEYB_LINE_ZS;
+ else
+ keyb_line = KEYB_LINE_DZ;
+ if (!register_dec_serial_hook(keyb_line, &lk201_hook))
+ unregister_dec_serial_hook(keyb_line);
}
Index: linux-2.4.35.4/drivers/tc/zs.c
===================================================================
--- linux-2.4.35.4.orig/drivers/tc/zs.c
+++ linux-2.4.35.4/drivers/tc/zs.c
@@ -68,6 +68,8 @@
#include <asm/bitops.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
+#include <asm/dec/serial.h>
+
#ifdef CONFIG_DECSTATION
#include <asm/dec/interrupts.h>
#include <asm/dec/machtype.h>
@@ -160,8 +162,8 @@ struct tty_struct zs_ttys[NUM_CHANNELS];
#ifdef CONFIG_SERIAL_DEC_CONSOLE
static struct console sercons;
#endif
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \
- && !defined(MODULE)
+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
+ !defined(MODULE)
static unsigned long break_pressed; /* break, really ... */
#endif
@@ -196,7 +198,6 @@ static int serial_refcount;
/*
* Debugging.
*/
-#undef SERIAL_DEBUG_INTR
#undef SERIAL_DEBUG_OPEN
#undef SERIAL_DEBUG_FLOW
#undef SERIAL_DEBUG_THROTTLE
@@ -221,10 +222,6 @@ static struct tty_struct *serial_table[N
static struct termios *serial_termios[NUM_CHANNELS];
static struct termios *serial_termios_locked[NUM_CHANNELS];
-#ifndef MIN
-#define MIN(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
* lock it in case the copy_from_user blocks while swapping in a page,
@@ -386,8 +383,6 @@ static inline void rs_recv_clear(struct
* -----------------------------------------------------------------------
*/
-static int tty_break; /* Set whenever BREAK condition is detected. */
-
/*
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
@@ -414,20 +409,15 @@ static _INLINE_ void receive_chars(struc
if (!tty && (!info->hook || !info->hook->rx_char))
continue;
- if (tty_break) {
- tty_break = 0;
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
- if (info->line == sercons.index) {
- if (!break_pressed) {
- break_pressed = jiffies;
- goto ignore_char;
- }
- break_pressed = 0;
- }
-#endif
+ flag = TTY_NORMAL;
+ if (info->tty_break) {
+ info->tty_break = 0;
flag = TTY_BREAK;
if (info->flags & ZILOG_SAK)
do_SAK(tty);
+ /* Ignore the null char got when BREAK is removed. */
+ if (ch == 0)
+ continue;
} else {
if (stat & Rx_OVR) {
flag = TTY_OVERRUN;
@@ -435,20 +425,22 @@ static _INLINE_ void receive_chars(struc
flag = TTY_FRAME;
} else if (stat & PAR_ERR) {
flag = TTY_PARITY;
- } else
- flag = 0;
- if (flag)
+ }
+ if (flag != TTY_NORMAL)
/* reset the error indication */
write_zsreg(info->zs_channel, R0, ERR_RES);
}
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
+ !defined(MODULE)
if (break_pressed && info->line == sercons.index) {
- if (ch != 0 &&
- time_before(jiffies, break_pressed + HZ*5)) {
+ /* Ignore the null char got when BREAK is removed. */
+ if (ch == 0)
+ continue;
+ if (time_before(jiffies, break_pressed + HZ * 5)) {
handle_sysrq(ch, regs, NULL, NULL);
break_pressed = 0;
- goto ignore_char;
+ continue;
}
break_pressed = 0;
}
@@ -459,23 +451,7 @@ static _INLINE_ void receive_chars(struc
return;
}
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
- static int flip_buf_ovf;
- ++flip_buf_ovf;
- continue;
- }
- tty->flip.count++;
- {
- static int flip_max_cnt;
- if (flip_max_cnt < tty->flip.count)
- flip_max_cnt = tty->flip.count;
- }
-
- *tty->flip.flag_buf_ptr++ = flag;
- *tty->flip.char_buf_ptr++ = ch;
-#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE)
- ignore_char:
-#endif
+ tty_insert_flip_char(tty, ch, flag);
}
if (tty)
tty_flip_buffer_push(tty);
@@ -517,11 +493,15 @@ static _INLINE_ void status_handle(struc
/* Get status from Read Register 0 */
stat = read_zsreg(info->zs_channel, R0);
- if (stat & BRK_ABRT) {
-#ifdef SERIAL_DEBUG_INTR
- printk("handling break....");
+ if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
+ !defined(MODULE)
+ if (info->line == sercons.index) {
+ if (!break_pressed)
+ break_pressed = jiffies;
+ } else
#endif
- tty_break = 1;
+ info->tty_break = 1;
}
if (info->zs_channel != info->zs_chan_a) {
@@ -957,7 +937,7 @@ static int rs_write(struct tty_struct *
save_flags(flags);
while (1) {
cli();
- c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
@@ -965,7 +945,7 @@ static int rs_write(struct tty_struct *
if (from_user) {
down(&tmp_buf_sem);
copy_from_user(tmp_buf, buf, c);
- c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
SERIAL_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
up(&tmp_buf_sem);
@@ -1282,46 +1262,48 @@ static int rs_ioctl(struct tty_struct *t
}
switch (cmd) {
- case TIOCMGET:
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int));
- if (error)
- return error;
- return get_modem_info(info, (unsigned int *) arg);
- case TIOCMBIS:
- case TIOCMBIC:
- case TIOCMSET:
- return set_modem_info(info, cmd, (unsigned int *) arg);
- case TIOCGSERIAL:
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(struct serial_struct));
- if (error)
- return error;
- return get_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *) arg);
- case TIOCSERGETLSR: /* Get line status register */
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(unsigned int));
- if (error)
- return error;
- else
- return get_lsr_info(info, (unsigned int *) arg);
+ case TIOCMGET:
+ error = verify_area(VERIFY_WRITE, (void *)arg,
+ sizeof(unsigned int));
+ if (error)
+ return error;
+ return get_modem_info(info, (unsigned int *)arg);
- case TIOCSERGSTRUCT:
- error = verify_area(VERIFY_WRITE, (void *) arg,
- sizeof(struct dec_serial));
- if (error)
- return error;
- copy_from_user((struct dec_serial *) arg,
- info, sizeof(struct dec_serial));
- return 0;
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ return set_modem_info(info, cmd, (unsigned int *)arg);
- default:
- return -ENOIOCTLCMD;
- }
+ case TIOCGSERIAL:
+ error = verify_area(VERIFY_WRITE, (void *)arg,
+ sizeof(struct serial_struct));
+ if (error)
+ return error;
+ return get_serial_info(info, (struct serial_struct *)arg);
+
+ case TIOCSSERIAL:
+ return set_serial_info(info, (struct serial_struct *)arg);
+
+ case TIOCSERGETLSR: /* Get line status register */
+ error = verify_area(VERIFY_WRITE, (void *)arg,
+ sizeof(unsigned int));
+ if (error)
+ return error;
+ else
+ return get_lsr_info(info, (unsigned int *)arg);
+
+ case TIOCSERGSTRUCT:
+ error = verify_area(VERIFY_WRITE, (void *)arg,
+ sizeof(struct dec_serial));
+ if (error)
+ return error;
+ copy_from_user((struct dec_serial *)arg, info,
+ sizeof(struct dec_serial));
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
return 0;
}
@@ -1446,7 +1428,8 @@ static void rs_close(struct tty_struct *
static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct dec_serial *info = (struct dec_serial *) tty->driver_data;
- unsigned long orig_jiffies, char_time;
+ unsigned long orig_jiffies;
+ int char_time;
if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent"))
return;
@@ -1462,7 +1445,7 @@ static void rs_wait_until_sent(struct tt
if (char_time == 0)
char_time = 1;
if (timeout)
- char_time = MIN(char_time, timeout);
+ char_time = min(char_time, timeout);
while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(char_time);
@@ -1714,7 +1697,7 @@ int rs_open(struct tty_struct *tty, stru
static void __init show_serial_version(void)
{
- printk("DECstation Z8530 serial driver version 0.08\n");
+ printk("DECstation Z8530 serial driver version 0.09\n");
}
/* Initialize Z8530s zs_channels
@@ -1994,8 +1977,9 @@ int __init zs_init(void)
* polling I/O routines
*/
static int
-zs_poll_tx_char(struct dec_serial *info, unsigned char ch)
+zs_poll_tx_char(void *handle, unsigned char ch)
{
+ struct dec_serial *info = handle;
struct dec_zschannel *chan = info->zs_channel;
int ret;
@@ -2017,8 +2001,9 @@ zs_poll_tx_char(struct dec_serial *info,
}
static int
-zs_poll_rx_char(struct dec_serial *info)
+zs_poll_rx_char(void *handle)
{
+ struct dec_serial *info = handle;
struct dec_zschannel *chan = info->zs_channel;
int ret;
@@ -2038,12 +2023,13 @@ zs_poll_rx_char(struct dec_serial *info)
return -ENODEV;
}
-unsigned int register_zs_hook(unsigned int channel, struct zs_hook *hook)
+int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook)
{
struct dec_serial *info = &zs_soft[channel];
if (info->hook) {
- printk(__FUNCTION__": line %d has already a hook registered\n", channel);
+ printk("%s: line %d has already a hook registered\n",
+ __FUNCTION__, channel);
return 0;
} else {
@@ -2055,7 +2041,7 @@ unsigned int register_zs_hook(unsigned i
}
}
-unsigned int unregister_zs_hook(unsigned int channel)
+int unregister_zs_hook(unsigned int channel)
{
struct dec_serial *info = &zs_soft[channel];
@@ -2063,8 +2049,8 @@ unsigned int unregister_zs_hook(unsigned
info->hook = NULL;
return 1;
} else {
- printk(__FUNCTION__": trying to unregister hook on line %d,"
- " but none is registered\n", channel);
+ printk("%s: trying to unregister hook on line %d,"
+ " but none is registered\n", __FUNCTION__, channel);
return 0;
}
}
@@ -2319,22 +2305,23 @@ void kgdb_interruptible(int yes)
write_zsreg(chan, 9, nine);
}
-static int kgdbhook_init_channel(struct dec_serial* info)
+static int kgdbhook_init_channel(void *handle)
{
return 0;
}
-static void kgdbhook_init_info(struct dec_serial* info)
+static void kgdbhook_init_info(void *handle)
{
}
-static void kgdbhook_rx_char(struct dec_serial* info,
- unsigned char ch, unsigned char stat)
+static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl)
{
+ struct dec_serial *info = handle;
+
+ if (fl != TTY_NORMAL)
+ return;
if (ch == 0x03 || ch == '$')
breakpoint();
- if (stat & (Rx_OVR|FRM_ERR|PAR_ERR))
- write_zsreg(info->zs_channel, 0, ERR_RES);
}
/* This sets up the serial port we're using, and turns on
@@ -2360,11 +2347,11 @@ static inline void kgdb_chaninit(struct
* for /dev/ttyb which is determined in setup_arch() from the
* boot command line flags.
*/
-struct zs_hook zs_kgdbhook = {
- init_channel : kgdbhook_init_channel,
- init_info : kgdbhook_init_info,
- cflags : B38400|CS8|CLOCAL,
- rx_char : kgdbhook_rx_char,
+struct dec_serial_hook zs_kgdbhook = {
+ .init_channel = kgdbhook_init_channel,
+ .init_info = kgdbhook_init_info,
+ .rx_char = kgdbhook_rx_char,
+ .cflags = B38400 | CS8 | CLOCAL,
}
void __init zs_kgdb_hook(int tty_num)
Index: linux-2.4.35.4/drivers/tc/zs.h
===================================================================
--- linux-2.4.35.4.orig/drivers/tc/zs.h
+++ linux-2.4.35.4/drivers/tc/zs.h
@@ -1,14 +1,18 @@
/*
- * macserial.h: Definitions for the Macintosh Z8530 serial driver.
+ * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver.
*
* Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras.
+ * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen.
*
* Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au)
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2004 Maciej W. Rozycki
*/
#ifndef _DECSERIAL_H
#define _DECSERIAL_H
+#include <asm/dec/serial.h>
+
#define NUM_ZSREGS 16
struct serial_struct {
@@ -89,63 +93,50 @@ struct dec_zschannel {
unsigned char curregs[NUM_ZSREGS];
};
-struct dec_serial;
-
-struct zs_hook {
- int (*init_channel)(struct dec_serial* info);
- void (*init_info)(struct dec_serial* info);
- void (*rx_char)(unsigned char ch, unsigned char stat);
- int (*poll_rx_char)(struct dec_serial* info);
- int (*poll_tx_char)(struct dec_serial* info,
- unsigned char ch);
- unsigned cflags;
-};
-
struct dec_serial {
- struct dec_serial *zs_next; /* For IRQ servicing chain */
- struct dec_zschannel *zs_channel; /* Channel registers */
- struct dec_zschannel *zs_chan_a; /* A side registers */
- unsigned char read_reg_zero;
-
- char soft_carrier; /* Use soft carrier on this channel */
- char break_abort; /* Is serial console in, so process brk/abrt */
- struct zs_hook *hook; /* Hook on this channel */
- char is_cons; /* Is this our console. */
- unsigned char tx_active; /* character is being xmitted */
- unsigned char tx_stopped; /* output is suspended */
-
- /* We need to know the current clock divisor
- * to read the bps rate the chip has currently
- * loaded.
+ struct dec_serial *zs_next; /* For IRQ servicing chain. */
+ struct dec_zschannel *zs_channel; /* Channel registers. */
+ struct dec_zschannel *zs_chan_a; /* A side registers. */
+ unsigned char read_reg_zero;
+
+ struct dec_serial_hook *hook; /* Hook on this channel. */
+ int tty_break; /* Set on BREAK condition. */
+ int is_cons; /* Is this our console. */
+ int tx_active; /* Char is being xmitted. */
+ int tx_stopped; /* Output is suspended. */
+
+ /*
+ * We need to know the current clock divisor
+ * to read the bps rate the chip has currently loaded.
*/
- unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
- int zs_baud;
+ int clk_divisor; /* May be 1, 16, 32, or 64. */
+ int zs_baud;
- char change_needed;
+ char change_needed;
int magic;
int baud_base;
int port;
int irq;
- int flags; /* defined in tty.h */
- int type; /* UART type */
+ int flags; /* Defined in tty.h. */
+ int type; /* UART type. */
struct tty_struct *tty;
int read_status_mask;
int ignore_status_mask;
int timeout;
int xmit_fifo_size;
int custom_divisor;
- int x_char; /* xon/xoff character */
+ int x_char; /* XON/XOFF character. */
int close_delay;
unsigned short closing_wait;
unsigned short closing_wait2;
unsigned long event;
unsigned long last_active;
int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- long session; /* Session of opening process */
- long pgrp; /* pgrp of opening process */
+ int count; /* # of fds on device. */
+ int blocked_open; /* # of blocked opens. */
+ long session; /* Sess of opening process. */
+ long pgrp; /* Pgrp of opening process. */
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
Index: linux-2.4.35.4/drivers/video/au1200fb.c
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/video/au1200fb.c
@@ -0,0 +1,1564 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Au1200 LCD Driver.
+ *
+ * Copyright 2004 AMD
+ * Author: AMD
+ *
+ * Based on:
+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
+ * Created 28 Dec 1997 by Geert Uytterhoeven
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+
+#include <asm/au1000.h>
+#include <asm/au1xxx_gpio.h>
+#include "au1200fb.h"
+
+#include <video/fbcon.h>
+#include <video/fbcon-cfb16.h>
+#include <video/fbcon-cfb32.h>
+#define CMAPSIZE 16
+
+#define AU1200_LCD_GET_WINENABLE 1
+#define AU1200_LCD_SET_WINENABLE 2
+#define AU1200_LCD_GET_WINLOCATION 3
+#define AU1200_LCD_SET_WINLOCATION 4
+#define AU1200_LCD_GET_WINSIZE 5
+#define AU1200_LCD_SET_WINSIZE 6
+#define AU1200_LCD_GET_BACKCOLOR 7
+#define AU1200_LCD_SET_BACKCOLOR 8
+#define AU1200_LCD_GET_COLORKEY 9
+#define AU1200_LCD_SET_COLORKEY 10
+#define AU1200_LCD_GET_PANEL 11
+#define AU1200_LCD_SET_PANEL 12
+
+typedef struct au1200_lcd_getset_t
+{
+ unsigned int subcmd;
+ union {
+ struct {
+ int enable;
+ } winenable;
+ struct {
+ int x, y;
+ } winlocation;
+ struct {
+ int hsz, vsz;
+ } winsize;
+ struct {
+ unsigned int color;
+ } backcolor;
+ struct {
+ unsigned int key;
+ unsigned int mask;
+ } colorkey;
+ struct {
+ int panel;
+ char desc[80];
+ } panel;
+ };
+} au1200_lcd_getset_t;
+
+AU1200_LCD *lcd = (AU1200_LCD *)AU1200_LCD_ADDR;
+static int window_index = 0; /* default is zero */
+static int panel_index = -1; /* default is call board_au1200fb_panel */
+
+struct window_settings
+{
+ unsigned char name[64];
+ uint32 mode_backcolor;
+ uint32 mode_colorkey;
+ uint32 mode_colorkeymsk;
+ struct
+ {
+ int xres;
+ int yres;
+ int xpos;
+ int ypos;
+ uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
+ uint32 mode_winenable;
+ } w[4];
+};
+
+struct panel_settings
+{
+ unsigned char name[64];
+ /* panel physical dimensions */
+ uint32 Xres;
+ uint32 Yres;
+ /* panel timings */
+ uint32 mode_screen;
+ uint32 mode_horztiming;
+ uint32 mode_verttiming;
+ uint32 mode_clkcontrol;
+ uint32 mode_pwmdiv;
+ uint32 mode_pwmhi;
+ uint32 mode_outmask;
+ uint32 mode_fifoctrl;
+ uint32 mode_toyclksrc;
+ uint32 mode_backlight;
+ uint32 mode_auxpll;
+ int (*device_init)(void);
+ int (*device_shutdown)(void);
+};
+
+#if defined(__BIG_ENDIAN)
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
+#else
+#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
+#endif
+
+extern int board_au1200fb_panel (void);
+extern int board_au1200fb_panel_init (void);
+extern int board_au1200fb_panel_shutdown (void);
+
+#if defined(CONFIG_FOCUS_ENHANCEMENTS)
+extern int board_au1200fb_focus_init_hdtv(void);
+extern int board_au1200fb_focus_init_component(void);
+extern int board_au1200fb_focus_init_cvsv(void);
+extern int board_au1200fb_focus_shutdown(void);
+#endif
+
+/*
+ * Default window configurations
+ */
+static struct window_settings windows[] =
+{
+ { /* Index 0 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+
+ { /* Index 1 */
+ "0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
+ /* mode_backcolor */ 0x006600ff,
+ /* mode_colorkey,msk*/ 0, 0,
+ {
+ {
+ /* xres, yres, xpos, ypos */ 320, 240, 5, 5,
+#if 0
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+#endif
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP|LCD_WINCTRL1_PO_00,
+ /* mode_winenable*/ LCD_WINENABLE_WEN0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 0, 0, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP,
+ /* mode_winenable*/ 0,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 100, 100, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
+ },
+ {
+ /* xres, yres, xpos, ypos */ 200, 25, 0, 0,
+ /* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565|LCD_WINCTRL1_PO_16BPP|LCD_WINCTRL1_PIPE,
+ /* mode_winenable*/ 0,
+ },
+ },
+ },
+ /* Need VGA 640 @ 24bpp, @ 32bpp */
+ /* Need VGA 800 @ 24bpp, @ 32bpp */
+ /* Need VGA 1024 @ 24bpp, @ 32bpp */
+} ;
+
+/*
+ * Controller configurations for various panels.
+ */
+static struct panel_settings panels[] =
+{
+ { /* Index 0: QVGA 320x240 H:33.3kHz V:110Hz */
+ "VGA_320x240",
+ 320, 240,
+ /* mode_screen */ LCD_SCREEN_SX_N(320) | LCD_SCREEN_SY_N(240),
+ /* mode_horztiming */ 0x00c4623b,
+ /* mode_verttiming */ 0x00502814,
+ /* mode_clkcontrol */ 0x00020002, /* /4=24Mhz */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* 96MHz AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ NULL,
+ /* device_shutdown */ NULL,
+ },
+
+ { /* Index 1: VGA 640x480 H:30.3kHz V:58Hz */
+ "VGA_640x480",
+ 640, 480,
+ /* mode_screen */ 0x13f9df80,
+ /* mode_horztiming */ 0x003c5859,
+ /* mode_verttiming */ 0x00741201,
+ /* mode_clkcontrol */ 0x00020001, /* /4=24Mhz */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ NULL,
+ /* device_shutdown */ NULL,
+ },
+
+ { /* Index 2: SVGA 800x600 H:46.1kHz V:69Hz */
+ "SVGA_800x600",
+ 800, 600,
+ /* mode_screen */ 0x18fa5780,
+ /* mode_horztiming */ 0x00dc7e77,
+ /* mode_verttiming */ 0x00584805,
+ /* mode_clkcontrol */ 0x00020000, /* /2=48Mhz */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ NULL,
+ /* device_shutdown */ NULL,
+ },
+
+ { /* Index 3: XVGA 1024x768 H:56.2kHz V:70Hz */
+ "XVGA_1024x768",
+ 1024, 768,
+ /* mode_screen */ 0x1ffaff80,
+ /* mode_horztiming */ 0x007d0e57,
+ /* mode_verttiming */ 0x00740a01,
+ /* mode_clkcontrol */ 0x000A0000, /* /1 */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 6, /* 72MHz AUXPLL */
+ /* device_init */ NULL,
+ /* device_shutdown */ NULL,
+ },
+
+ { /* Index 4: XVGA 1280x1024 H:68.5kHz V:65Hz */
+ "XVGA_1280x1024",
+ 1280, 1024,
+ /* mode_screen */ 0x27fbff80,
+ /* mode_horztiming */ 0x00cdb2c7,
+ /* mode_verttiming */ 0x00600002,
+ /* mode_clkcontrol */ 0x000A0000, /* /1 */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 10, /* 120MHz AUXPLL */
+ /* device_init */ NULL,
+ /* device_shutdown */ NULL,
+ },
+
+ { /* Index 5: Samsung 1024x768 TFT */
+ "Samsung_1024x768_TFT",
+ 1024, 768,
+ /* mode_screen */ 0x1ffaff80,
+ /* mode_horztiming */ 0x018cc677,
+ /* mode_verttiming */ 0x00241217,
+ /* mode_clkcontrol */ 0x00000000, /* SCB 0x1 /4=24Mhz */
+ /* mode_pwmdiv */ 0x8000063f, /* SCB 0x0 */
+ /* mode_pwmhi */ 0x03400000, /* SCB 0x0 */
+ /* mode_outmask */ 0x00fcfcfc,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* 96MHz AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_panel_init,
+ /* device_shutdown */ board_au1200fb_panel_shutdown,
+ },
+
+ { /* Index 6: Toshiba 640x480 TFT */
+ "Toshiba_640x480_TFT",
+ 640, 480,
+ /* mode_screen */ LCD_SCREEN_SX_N(640) | LCD_SCREEN_SY_N(480),
+ /* mode_horztiming */ LCD_HORZTIMING_HPW_N(96) | LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
+ /* mode_verttiming */ LCD_VERTTIMING_VPW_N(2) | LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32) ,
+ /* mode_clkcontrol */ 0x00000000, /* /4=24Mhz */
+ /* mode_pwmdiv */ 0x8000063f,
+ /* mode_pwmhi */ 0x03400000,
+ /* mode_outmask */ 0x00fcfcfc,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* 96MHz AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_panel_init,
+ /* device_shutdown */ board_au1200fb_panel_shutdown,
+ },
+
+ { /* Index 7: Sharp 320x240 TFT */
+ "Sharp_320x240_TFT",
+ 320, 240,
+ /* mode_screen */ LCD_SCREEN_SX_N(320) | LCD_SCREEN_SY_N(240),
+ /* mode_horztiming */ LCD_HORZTIMING_HPW_N(60) | LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
+ /* mode_verttiming */ LCD_VERTTIMING_VPW_N(2) | LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5) ,
+ /* mode_clkcontrol */ LCD_CLKCONTROL_PCD_N(7), /* /16=6Mhz */
+ /* mode_pwmdiv */ 0x8000063f,
+ /* mode_pwmhi */ 0x03400000,
+ /* mode_outmask */ 0x00fcfcfc,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* 96MHz AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_panel_init,
+ /* device_shutdown */ board_au1200fb_panel_shutdown,
+ },
+ { /* Index 8: Toppoly TD070WGCB2 7" 854x480 TFT */
+ "Toppoly_TD070WGCB2",
+ 854, 480,
+ /* mode_screen */ LCD_SCREEN_SX_N(854) | LCD_SCREEN_SY_N(480),
+ /* mode_horztiming */ LCD_HORZTIMING_HND2_N(44) | LCD_HORZTIMING_HND1_N(44) | LCD_HORZTIMING_HPW_N(114),
+ /* mode_verttiming */ LCD_VERTTIMING_VND2_N(20) | LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
+ /* mode_clkcontrol */ 0x00020001, /* /4=24Mhz */
+ /* mode_pwmdiv */ 0x8000063f,
+ /* mode_pwmhi */ 0x03400000,
+ /* mode_outmask */ 0x00FCFCFC,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000004, /* AUXPLL directly */
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_panel_init,
+ /* device_shutdown */ board_au1200fb_panel_shutdown,
+ },
+#if defined(CONFIG_FOCUS_ENHANCEMENTS)
+ { /* Index 9: Focus FS453 TV-Out 640x480 */
+ "FS453_640x480 (Composite/S-Video)",
+ 640, 480,
+ /* mode_screen */ LCD_SCREEN_SX_N(640) | LCD_SCREEN_SY_N(480),
+ /* mode_horztiming */ LCD_HORZTIMING_HND2_N(143) | LCD_HORZTIMING_HND1_N(143) | LCD_HORZTIMING_HPW_N(10),
+ /* mode_verttiming */ LCD_VERTTIMING_VND2_N(30) | LCD_VERTTIMING_VND1_N(30) | LCD_VERTTIMING_VPW_N(5),
+ /* mode_clkcontrol */ 0x00480000 | (1<<17) | (1<<18), /* External Clock, 1:1 clock ratio */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000000,
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_focus_init_cvsv,
+ /* device_shutdown */ board_au1200fb_focus_shutdown,
+ },
+
+ { /* Index 10: Focus FS453 TV-Out 640x480 */
+ "FS453_640x480 (Component Video)",
+ 640, 480,
+ /* mode_screen */ LCD_SCREEN_SX_N(640) | LCD_SCREEN_SY_N(480),
+ /* mode_horztiming */ LCD_HORZTIMING_HND2_N(143) | LCD_HORZTIMING_HND1_N(143) | LCD_HORZTIMING_HPW_N(10),
+ /* mode_verttiming */ LCD_VERTTIMING_VND2_N(30) | LCD_VERTTIMING_VND1_N(30) | LCD_VERTTIMING_VPW_N(5),
+ /* mode_clkcontrol */ 0x00480000 | (1<<17) | (1<<18), /* External Clock, 1:1 clock ratio */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000000,
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_focus_init_component,
+ /* device_shutdown */ board_au1200fb_focus_shutdown,
+ },
+
+ { /* Index 11: Focus FS453 TV-Out 640x480 */
+ "FS453_640x480 (HDTV)",
+ 720, 480,
+ /* mode_screen */ LCD_SCREEN_SX_N(720) | LCD_SCREEN_SY_N(480),
+ /* mode_horztiming */ LCD_HORZTIMING_HND2_N(28) | LCD_HORZTIMING_HND1_N(46) | LCD_HORZTIMING_HPW_N(64),
+ /* mode_verttiming */ LCD_VERTTIMING_VND2_N(7) | LCD_VERTTIMING_VND1_N(31) | LCD_VERTTIMING_VPW_N(7),
+ /* mode_clkcontrol */ 0x00480000 | (1<<17) | (1<<18), /* External Clock, 1:1 clock ratio */
+ /* mode_pwmdiv */ 0x00000000,
+ /* mode_pwmhi */ 0x00000000,
+ /* mode_outmask */ 0x00FFFFFF,
+ /* mode_fifoctrl */ 0x2f2f2f2f,
+ /* mode_toyclksrc */ 0x00000000,
+ /* mode_backlight */ 0x00000000,
+ /* mode_auxpll */ 8, /* 96MHz AUXPLL */
+ /* device_init */ board_au1200fb_focus_init_hdtv,
+ /* device_shutdown */ board_au1200fb_focus_shutdown,
+ },
+#endif
+};
+
+#define NUM_PANELS (sizeof(panels) / sizeof(struct panel_settings))
+
+static struct window_settings *win;
+static struct panel_settings *panel;
+
+struct au1200fb_info {
+ struct fb_info_gen gen;
+ unsigned long fb_virt_start;
+ unsigned long fb_size;
+ unsigned long fb_phys;
+ int mmaped;
+ int nohwcursor;
+ int noblanking;
+
+ struct { unsigned red, green, blue, pad; } palette[256];
+
+#if defined(FBCON_HAS_CFB16)
+ u16 fbcon_cmap16[16];
+#endif
+#if defined(FBCON_HAS_CFB32)
+ u32 fbcon_cmap32[16];
+#endif
+};
+
+
+struct au1200fb_par {
+ struct fb_var_screeninfo var;
+
+ int line_length; /* in bytes */
+ int cmap_len; /* color-map length */
+};
+
+#ifndef CONFIG_FB_AU1200_DEVS
+#define CONFIG_FB_AU1200_DEVS 1
+#endif
+
+static struct au1200fb_info fb_infos[CONFIG_FB_AU1200_DEVS];
+static struct au1200fb_par fb_pars[CONFIG_FB_AU1200_DEVS];
+static struct display disps[CONFIG_FB_AU1200_DEVS];
+
+int au1200fb_init(void);
+void au1200fb_setup(char *options, int *ints);
+static int au1200fb_mmap(struct fb_info *fb, struct file *file,
+ struct vm_area_struct *vma);
+static int au1200_blank(int blank_mode, struct fb_info_gen *info);
+static int au1200fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
+ u_long arg, int con, struct fb_info *info);
+
+void au1200_nocursor(struct display *p, int mode, int xx, int yy){};
+
+static int au1200_setlocation (int plane, int xpos, int ypos);
+static int au1200_setsize (int plane, int xres, int yres);
+static void au1200_setmode(int plane);
+static void au1200_setpanel (struct panel_settings *newpanel);
+
+static struct fb_ops au1200fb_ops = {
+ owner: THIS_MODULE,
+ fb_get_fix: fbgen_get_fix,
+ fb_get_var: fbgen_get_var,
+ fb_set_var: fbgen_set_var,
+ fb_get_cmap: fbgen_get_cmap,
+ fb_set_cmap: fbgen_set_cmap,
+ fb_pan_display: fbgen_pan_display,
+ fb_ioctl: au1200fb_ioctl,
+ fb_mmap: au1200fb_mmap,
+};
+
+
+static int
+winbpp (unsigned int winctrl1)
+{
+ /* how many bytes of memory are needed for each pixel format */
+ switch (winctrl1 & LCD_WINCTRL1_FRM)
+ {
+ case LCD_WINCTRL1_FRM_1BPP: return 1; break;
+ case LCD_WINCTRL1_FRM_2BPP: return 2; break;
+ case LCD_WINCTRL1_FRM_4BPP: return 4; break;
+ case LCD_WINCTRL1_FRM_8BPP: return 8; break;
+ case LCD_WINCTRL1_FRM_12BPP: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPP655: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPP565: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPP556: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPPI1555: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPPI5551: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPPA1555: return 16; break;
+ case LCD_WINCTRL1_FRM_16BPPA5551: return 16; break;
+ case LCD_WINCTRL1_FRM_24BPP: return 32; break;
+ case LCD_WINCTRL1_FRM_32BPP: return 32; break;
+ default: return 0; break;
+ }
+}
+
+static int
+fbinfo2index (struct fb_info *fb_info)
+{
+ int i;
+ for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i)
+ {
+ if (fb_info == (struct fb_info *)(&fb_infos[i]))
+ return i;
+ }
+ printk("au1200fb: ERROR: fbinfo2index failed!\n");
+ return -1;
+}
+
+static void au1200_detect(void)
+{
+ /*
+ * This function should detect the current video mode settings
+ * and store it as the default video mode
+ * Yeh, well, we're not going to change any settings so we're
+ * always stuck with the default ...
+ */
+}
+
+static int au1200_encode_fix(struct fb_fix_screeninfo *fix,
+ const void *_par, struct fb_info_gen *_info)
+{
+ struct au1200fb_info *info = (struct au1200fb_info *) _info;
+ struct au1200fb_par *par = (struct au1200fb_par *) _par;
+ int plane;
+
+ plane = fbinfo2index(info);
+
+ memset(fix, 0, sizeof(struct fb_fix_screeninfo));
+
+ fix->smem_start = info->fb_phys;
+ fix->smem_len = info->fb_size;
+ fix->type = FB_TYPE_PACKED_PIXELS;
+ fix->type_aux = 0;
+ fix->visual = (par->var.bits_per_pixel == 8) ?
+ FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+ fix->ywrapstep = 0;
+ fix->xpanstep = 1;
+ fix->ypanstep = 1;
+ /* FIX!!!! why doesn't par->line_length work???? it does for au1100 */
+ fix->line_length = fb_pars[plane].line_length; /*par->line_length;*/
+ return 0;
+}
+
+static void set_color_bitfields(struct fb_var_screeninfo *var, int plane)
+{
+ if (var->bits_per_pixel == 8)
+ {
+ var->red.offset = 0;
+ var->red.length = 8;
+ var->green.offset = 0;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ }
+ else
+
+ if (var->bits_per_pixel == 16)
+ {
+ /* FIX!!! How does CCO affect this ? */
+ /* FIX!!! Not exactly sure how many of these work with FB */
+ switch (win->w[plane].mode_winctrl1 & LCD_WINCTRL1_FRM)
+ {
+ case LCD_WINCTRL1_FRM_16BPP655:
+ var->red.offset = 10;
+ var->red.length = 6;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ case LCD_WINCTRL1_FRM_16BPP565:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ case LCD_WINCTRL1_FRM_16BPP556:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 6;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 6;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ case LCD_WINCTRL1_FRM_16BPPI1555:
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ case LCD_WINCTRL1_FRM_16BPPI5551:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 6;
+ var->green.length = 5;
+ var->blue.offset = 1;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ case LCD_WINCTRL1_FRM_16BPPA1555:
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->transp.offset = 15;
+ var->transp.length = 1;
+ break;
+
+ case LCD_WINCTRL1_FRM_16BPPA5551:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 6;
+ var->green.length = 5;
+ var->blue.offset = 1;
+ var->blue.length = 5;
+ var->transp.offset = 0;
+ var->transp.length = 1;
+ break;
+
+ default:
+ printk("ERROR: Invalid PIXEL FORMAT!!!\n"); break;
+ }
+ }
+ else
+
+ if (var->bits_per_pixel == 32)
+ {
+ switch (win->w[plane].mode_winctrl1 & LCD_WINCTRL1_FRM)
+ {
+ case LCD_WINCTRL1_FRM_24BPP:
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ break;
+
+ case LCD_WINCTRL1_FRM_32BPP:
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ break;
+ }
+ }
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ var->transp.msb_right = 0;
+#if 0
+printk("set_color_bitfields(a=%d, r=%d..%d, g=%d..%d, b=%d..%d)\n",
+ var->transp.offset,
+ var->red.offset+var->red.length-1, var->red.offset,
+ var->green.offset+var->green.length-1, var->green.offset,
+ var->blue.offset+var->blue.length-1, var->blue.offset);
+#endif
+}
+
+static int au1200_decode_var(const struct fb_var_screeninfo *var,
+ void *_par, struct fb_info_gen *_info)
+{
+ struct au1200fb_par *par = (struct au1200fb_par *)_par;
+ int plane, bpp;
+
+ plane = fbinfo2index((struct fb_info *)_info);
+
+ /*
+ * Don't allow setting any of these yet: xres and yres don't
+ * make sense for LCD panels.
+ */
+ if (var->xres != win->w[plane].xres ||
+ var->yres != win->w[plane].yres ||
+ var->xres != win->w[plane].xres ||
+ var->yres != win->w[plane].yres) {
+ return -EINVAL;
+ }
+
+ bpp = winbpp(win->w[plane].mode_winctrl1);
+ if(var->bits_per_pixel != bpp) {
+ /* on au1200, window pixel format is independent of panel pixel */
+ printk("WARNING: bits_per_pizel != panel->bpp\n");
+ }
+
+ memset(par, 0, sizeof(struct au1200fb_par));
+ par->var = *var;
+
+ /* FIX!!! */
+ switch (var->bits_per_pixel) {
+ case 8:
+ par->var.bits_per_pixel = 8;
+ break;
+ case 16:
+ par->var.bits_per_pixel = 16;
+ break;
+ case 24:
+ case 32:
+ par->var.bits_per_pixel = 32;
+ break;
+ default:
+ printk("color depth %d bpp not supported\n",
+ var->bits_per_pixel);
+ return -EINVAL;
+
+ }
+ set_color_bitfields(&par->var, plane);
+ /* FIX!!! what is this for 24/32bpp? */
+ par->cmap_len = (par->var.bits_per_pixel == 8) ? 256 : 16;
+ return 0;
+}
+
+static int au1200_encode_var(struct fb_var_screeninfo *var,
+ const void *par, struct fb_info_gen *_info)
+{
+ *var = ((struct au1200fb_par *)par)->var;
+ return 0;
+}
+
+static void
+au1200_get_par(void *_par, struct fb_info_gen *_info)
+{
+ int index;
+
+ index = fbinfo2index((struct fb_info *)_info);
+ *(struct au1200fb_par *)_par = fb_pars[index];
+}
+
+static void au1200_set_par(const void *par, struct fb_info_gen *info)
+{
+ /* nothing to do: we don't change any settings */
+}
+
+static int au1200_getcolreg(unsigned regno, unsigned *red, unsigned *green,
+ unsigned *blue, unsigned *transp,
+ struct fb_info *info)
+{
+ struct au1200fb_info* i = (struct au1200fb_info*)info;
+
+ if (regno > 255)
+ return 1;
+
+ *red = i->palette[regno].red;
+ *green = i->palette[regno].green;
+ *blue = i->palette[regno].blue;
+ *transp = 0;
+
+ return 0;
+}
+
+static int au1200_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ struct au1200fb_info* i = (struct au1200fb_info *)info;
+ u32 rgbcol;
+ int plane, bpp;
+
+ plane = fbinfo2index((struct fb_info *)info);
+ bpp = winbpp(win->w[plane].mode_winctrl1);
+
+ if (regno > 255)
+ return 1;
+
+ i->palette[regno].red = red;
+ i->palette[regno].green = green;
+ i->palette[regno].blue = blue;
+
+ switch(bpp) {
+#ifdef FBCON_HAS_CFB8
+ case 8:
+ red >>= 10;
+ green >>= 10;
+ blue >>= 10;
+ panel_reg->lcd_pallettebase[regno] = (blue&0x1f) |
+ ((green&0x3f)<<5) | ((red&0x1f)<<11);
+ break;
+#endif
+#ifdef FBCON_HAS_CFB16
+/* FIX!!!! depends upon pixel format */
+ case 16:
+ i->fbcon_cmap16[regno] =
+ ((red & 0xf800) >> 0) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+ break;
+#endif
+#ifdef FBCON_HAS_CFB32
+ case 32:
+ i->fbcon_cmap32[regno] =
+ (((u32 )transp & 0xff00) << 16) |
+ (((u32 )red & 0xff00) << 8) |
+ (((u32 )green & 0xff00)) |
+ (((u32 )blue & 0xff00) >> 8);
+ break;
+#endif
+ default:
+ printk("unsupported au1200_setcolreg(%d)\n", bpp);
+ break;
+ }
+
+ return 0;
+}
+
+
+static int au1200_blank(int blank_mode, struct fb_info_gen *_info)
+{
+ struct au1200fb_info *fb_info = (struct au1200fb_info *)_info;
+ int plane;
+
+ /* Short-circuit screen blanking */
+ if (fb_info->noblanking)
+ return 0;
+
+ plane = fbinfo2index((struct fb_info *)_info);
+
+ switch (blank_mode) {
+ case VESA_NO_BLANKING:
+ /* printk("turn on panel\n"); */
+ au1200_setpanel(panel);
+ break;
+
+ case VESA_VSYNC_SUSPEND:
+ case VESA_HSYNC_SUSPEND:
+ case VESA_POWERDOWN:
+ /* printk("turn off panel\n"); */
+ au1200_setpanel(NULL);
+ break;
+ default:
+ break;
+
+ }
+ return 0;
+}
+
+static void au1200_set_disp(const void *unused, struct display *disp,
+ struct fb_info_gen *info)
+{
+ struct au1200fb_info *fb_info;
+ int plane;
+
+ fb_info = (struct au1200fb_info *)info;
+
+ disp->screen_base = (char *)fb_info->fb_virt_start;
+
+ switch (disp->var.bits_per_pixel) {
+#ifdef FBCON_HAS_CFB8
+ case 8:
+ disp->dispsw = &fbcon_cfb8;
+ if (fb_info->nohwcursor)
+ fbcon_cfb8.cursor = au1200_nocursor;
+ break;
+#endif
+#ifdef FBCON_HAS_CFB16
+ case 16:
+ disp->dispsw = &fbcon_cfb16;
+ disp->dispsw_data = fb_info->fbcon_cmap16;
+ if (fb_info->nohwcursor)
+ fbcon_cfb16.cursor = au1200_nocursor;
+ break;
+#endif
+#ifdef FBCON_HAS_CFB32
+ case 32:
+ disp->dispsw = &fbcon_cfb32;
+ disp->dispsw_data = fb_info->fbcon_cmap32;
+ if (fb_info->nohwcursor)
+ fbcon_cfb32.cursor = au1200_nocursor;
+ break;
+#endif
+ default:
+ disp->dispsw = &fbcon_dummy;
+ disp->dispsw_data = NULL;
+ break;
+ }
+}
+
+static int
+au1200fb_mmap(struct fb_info *_fb,
+ struct file *file,
+ struct vm_area_struct *vma)
+{
+ unsigned int len;
+ unsigned long start=0, off;
+
+ struct au1200fb_info *fb_info = (struct au1200fb_info *)_fb;
+
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
+ return -EINVAL;
+ }
+
+ start = fb_info->fb_phys & PAGE_MASK;
+ len = PAGE_ALIGN((start & ~PAGE_MASK) + fb_info->fb_size);
+
+ off = vma->vm_pgoff << PAGE_SHIFT;
+
+ if ((vma->vm_end - vma->vm_start + off) > len) {
+ return -EINVAL;
+ }
+
+ off += start;
+ vma->vm_pgoff = off >> PAGE_SHIFT;
+
+ pgprot_val(vma->vm_page_prot) &= ~_CACHE_MASK;
+ pgprot_val(vma->vm_page_prot) |= _CACHE_UNCACHED;
+
+ /* This is an IO map - tell maydump to skip this VMA */
+ vma->vm_flags |= VM_IO;
+
+ if (io_remap_page_range(vma->vm_start, off,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot)) {
+ return -EAGAIN;
+ }
+
+ fb_info->mmaped = 1;
+ return 0;
+}
+
+int au1200_pan_display(const struct fb_var_screeninfo *var,
+ struct fb_info_gen *info)
+{
+ return 0;
+}
+
+
+static int au1200fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
+ u_long arg, int con, struct fb_info *info)
+{
+ int plane;
+
+ plane = fbinfo2index(info);
+
+ /* printk("au1200fb: ioctl %d on plane %d\n", cmd, plane); */
+
+ if (cmd == 0x46FF)
+ {
+ au1200_lcd_getset_t iodata;
+
+ if (copy_from_user(&iodata, (void *) arg, sizeof(au1200_lcd_getset_t)))
+ return -EFAULT;
+
+ switch (iodata.subcmd)
+ {
+ case AU1200_LCD_GET_WINENABLE:
+ iodata.winenable.enable = (lcd->winenable & (1<<plane)) ? 1 : 0;
+ break;
+ case AU1200_LCD_SET_WINENABLE:
+ {
+ u32 winenable;
+ winenable = lcd->winenable;
+ winenable &= ~(1<<plane);
+ winenable |= (iodata.winenable.enable) ? (1<<plane) : 0;
+ lcd->winenable = winenable;
+ }
+ break;
+ case AU1200_LCD_GET_WINLOCATION:
+ iodata.winlocation.x =
+ (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
+ iodata.winlocation.y =
+ (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
+ break;
+ case AU1200_LCD_SET_WINLOCATION:
+ au1200_setlocation(plane, iodata.winlocation.x, iodata.winlocation.y);
+ break;
+ case AU1200_LCD_GET_WINSIZE:
+ iodata.winsize.hsz =
+ (lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11;
+ iodata.winsize.vsz =
+ (lcd->window[plane].winctrl0 & LCD_WINCTRL1_SZY) >> 0;
+ break;
+ case AU1200_LCD_SET_WINSIZE:
+ au1200_setsize(plane, iodata.winsize.hsz, iodata.winsize.vsz);
+ break;
+ case AU1200_LCD_GET_BACKCOLOR:
+ iodata.backcolor.color = lcd->backcolor;
+ break;
+ case AU1200_LCD_SET_BACKCOLOR:
+ lcd->backcolor = iodata.backcolor.color;
+ break;
+ case AU1200_LCD_GET_COLORKEY:
+ iodata.colorkey.key = lcd->colorkey;
+ iodata.colorkey.mask = lcd->colorkeymsk;
+ break;
+ case AU1200_LCD_SET_COLORKEY:
+ lcd->colorkey = iodata.colorkey.key;
+ lcd->colorkeymsk = iodata.colorkey.mask;
+ break;
+ case AU1200_LCD_GET_PANEL:
+ iodata.panel.panel = panel_index;
+ break;
+ case AU1200_LCD_SET_PANEL:
+ if ((iodata.panel.panel >= 0) && (iodata.panel.panel < NUM_PANELS))
+ {
+ struct panel_settings *newpanel;
+ panel_index = iodata.panel.panel;
+ newpanel = &panels[panel_index];
+ au1200_setpanel(newpanel);
+ }
+ break;
+ }
+
+ return copy_to_user((void *) arg, &iodata, sizeof(au1200_lcd_getset_t)) ? -EFAULT : 0;
+ }
+
+ return -EINVAL;
+}
+
+static struct fbgen_hwswitch au1200_switch = {
+ au1200_detect,
+ au1200_encode_fix,
+ au1200_decode_var,
+ au1200_encode_var,
+ au1200_get_par,
+ au1200_set_par,
+ au1200_getcolreg,
+ au1200_setcolreg,
+ au1200_pan_display,
+ au1200_blank,
+ au1200_set_disp
+};
+
+static void au1200_setpanel (struct panel_settings *newpanel)
+{
+ /*
+ * Perform global setup/init of LCD controller
+ */
+ uint32 winenable;
+
+ /* Make sure all windows disabled */
+ winenable = lcd->winenable;
+ lcd->winenable = 0;
+
+ /*
+ * Ensure everything is disabled before reconfiguring
+ */
+ if (lcd->screen & LCD_SCREEN_SEN)
+ {
+ /* Wait for vertical sync period */
+ lcd->intstatus = LCD_INT_SS;
+ while ((lcd->intstatus & LCD_INT_SS) == 0)
+ ;
+
+ lcd->screen &= ~LCD_SCREEN_SEN; /*disable the controller*/
+
+ do
+ {
+ lcd->intstatus = lcd->intstatus; /*clear interrupts*/
+ }
+ /*wait for controller to shut down*/
+ while ((lcd->intstatus & LCD_INT_SD) == 0);
+
+ /* Call shutdown of current panel (if up) */
+ /* this must occur last, because if an external clock is driving
+ the controller, the clock cannot be turned off before first
+ shutting down the controller.
+ */
+ if (panel->device_shutdown != NULL) panel->device_shutdown();
+ }
+
+ /* Check if only needing to turn off panel */
+ if (panel == NULL) return;
+
+ panel = newpanel;
+
+ printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
+
+ /*
+ * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
+ */
+ if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
+ {
+ uint32 sys_clksrc;
+ /* WARNING! This should really be a check since other peripherals can
+ be affected by changins sys_auxpll */
+ au_writel(panel->mode_auxpll, SYS_AUXPLL);
+ sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
+ sys_clksrc |= panel->mode_toyclksrc;
+ au_writel(sys_clksrc, SYS_CLKSRC);
+ }
+
+ /*
+ * Configure panel timings
+ */
+ lcd->screen = panel->mode_screen;
+ lcd->horztiming = panel->mode_horztiming;
+ lcd->verttiming = panel->mode_verttiming;
+ lcd->clkcontrol = panel->mode_clkcontrol;
+ lcd->pwmdiv = panel->mode_pwmdiv;
+ lcd->pwmhi = panel->mode_pwmhi;
+ lcd->outmask = panel->mode_outmask;
+ lcd->fifoctrl = panel->mode_fifoctrl;
+ au_sync();
+
+ /* FIX!!! Check window settings to make sure still valid for new geometry */
+ au1200_setlocation(0, win->w[0].xpos, win->w[0].ypos);
+ au1200_setlocation(1, win->w[1].xpos, win->w[1].ypos);
+ au1200_setlocation(2, win->w[2].xpos, win->w[2].ypos);
+ au1200_setlocation(3, win->w[3].xpos, win->w[3].ypos);
+ lcd->winenable = winenable;
+
+ /*
+ * Re-enable screen now that it is configured
+ */
+ lcd->screen |= LCD_SCREEN_SEN;
+ au_sync();
+
+ /* Call init of panel */
+ if (panel->device_init != NULL) panel->device_init();
+
+#if 0
+#define D(X) printk("%25s: %08X\n", #X, X)
+ D(lcd->screen);
+ D(lcd->horztiming);
+ D(lcd->verttiming);
+ D(lcd->clkcontrol);
+ D(lcd->pwmdiv);
+ D(lcd->pwmhi);
+ D(lcd->outmask);
+ D(lcd->fifoctrl);
+ D(lcd->window[0].winctrl0);
+ D(lcd->window[0].winctrl1);
+ D(lcd->window[0].winctrl2);
+ D(lcd->window[0].winbuf0);
+ D(lcd->window[0].winbuf1);
+ D(lcd->window[0].winbufctrl);
+ D(lcd->window[1].winctrl0);
+ D(lcd->window[1].winctrl1);
+ D(lcd->window[1].winctrl2);
+ D(lcd->window[1].winbuf0);
+ D(lcd->window[1].winbuf1);
+ D(lcd->window[1].winbufctrl);
+ D(lcd->window[2].winctrl0);
+ D(lcd->window[2].winctrl1);
+ D(lcd->window[2].winctrl2);
+ D(lcd->window[2].winbuf0);
+ D(lcd->window[2].winbuf1);
+ D(lcd->window[2].winbufctrl);
+ D(lcd->window[3].winctrl0);
+ D(lcd->window[3].winctrl1);
+ D(lcd->window[3].winctrl2);
+ D(lcd->window[3].winbuf0);
+ D(lcd->window[3].winbuf1);
+ D(lcd->window[3].winbufctrl);
+ D(lcd->winenable);
+ D(lcd->intenable);
+ D(lcd->intstatus);
+ D(lcd->backcolor);
+ D(lcd->winenable);
+ D(lcd->colorkey);
+ D(lcd->colorkeymsk);
+ D(lcd->hwc.cursorctrl);
+ D(lcd->hwc.cursorpos);
+ D(lcd->hwc.cursorcolor0);
+ D(lcd->hwc.cursorcolor1);
+ D(lcd->hwc.cursorcolor2);
+ D(lcd->hwc.cursorcolor3);
+#endif
+}
+
+static int au1200_setsize (int plane, int xres, int yres)
+{
+#if 0
+ uint32 winctrl0, winctrl1, winenable;
+ int xsz, ysz;
+
+ /* FIX!!! X*Y can not surpass allocated memory */
+
+ printk("setsize: x %d y %d\n", xres, yres);
+ winctrl1 = lcd->window[plane].winctrl1;
+ printk("org winctrl1 %08X\n", winctrl1);
+ winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
+
+ xres -= 1;
+ yres -= 1;
+ winctrl1 |= (xres << 11);
+ winctrl1 |= (yres << 0);
+
+ printk("new winctrl1 %08X\n", winctrl1);
+
+ /*winenable = lcd->winenable & (1 << plane); */
+ /*lcd->winenable &= ~(1 << plane); */
+ lcd->window[plane].winctrl1 = winctrl1;
+ /*lcd->winenable |= winenable; */
+#endif
+ return 0;
+}
+
+static int au1200_setlocation (int plane, int xpos, int ypos)
+{
+ uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
+ int xsz, ysz;
+
+ /* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
+
+ winctrl0 = lcd->window[plane].winctrl0;
+ winctrl1 = lcd->window[plane].winctrl1;
+ winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
+ winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
+
+ /* Check for off-screen adjustments */
+ xsz = win->w[plane].xres;
+ ysz = win->w[plane].yres;
+ if ((xpos + win->w[plane].xres) > panel->Xres)
+ {
+ /* Off-screen to the right */
+ xsz = panel->Xres - xpos; /* off by 1 ??? */
+ /*printk("off screen right\n");*/
+ }
+
+ if ((ypos + win->w[plane].yres) > panel->Yres)
+ {
+ /* Off-screen to the bottom */
+ ysz = panel->Yres - ypos; /* off by 1 ??? */
+ /*printk("off screen bottom\n");*/
+ }
+
+ if (xpos < 0)
+ {
+ /* Off-screen to the left */
+ xsz = win->w[plane].xres + xpos;
+ fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
+ xpos = 0;
+ /*printk("off screen left\n");*/
+ }
+
+ if (ypos < 0)
+ {
+ /* Off-screen to the top */
+ ysz = win->w[plane].yres + ypos;
+ fb_offset += ((0 - ypos) * fb_pars[plane].line_length);
+ ypos = 0;
+ /*printk("off screen top\n");*/
+ }
+
+ /* record settings */
+ win->w[plane].xpos = xpos;
+ win->w[plane].ypos = ypos;
+
+ xsz -= 1;
+ ysz -= 1;
+ winctrl0 |= (xpos << 21);
+ winctrl0 |= (ypos << 10);
+ winctrl1 |= (xsz << 11);
+ winctrl1 |= (ysz << 0);
+
+ /* Disable the window while making changes, then restore WINEN */
+ winenable = lcd->winenable & (1 << plane);
+ lcd->winenable &= ~(1 << plane);
+ lcd->window[plane].winctrl0 = winctrl0;
+ lcd->window[plane].winctrl1 = winctrl1;
+ lcd->window[plane].winbuf0 =
+ lcd->window[plane].winbuf1 = fb_infos[plane].fb_phys + fb_offset;
+ lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
+ lcd->winenable |= winenable;
+
+ return 0;
+}
+
+static void au1200_setmode(int plane)
+{
+ /* Window/plane setup */
+ lcd->window[plane].winctrl1 = ( 0
+ | LCD_WINCTRL1_PRI_N(plane)
+ | win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
+ ) ;
+
+ au1200_setlocation(plane, win->w[plane].xpos, win->w[plane].ypos);
+
+ lcd->window[plane].winctrl2 = ( 0
+ | LCD_WINCTRL2_CKMODE_00
+ | LCD_WINCTRL2_DBM
+/* | LCD_WINCTRL2_RAM */
+ | LCD_WINCTRL2_BX_N(fb_pars[plane].line_length)
+ | LCD_WINCTRL2_SCX_1
+ | LCD_WINCTRL2_SCY_1
+ ) ;
+ lcd->winenable |= win->w[plane].mode_winenable;
+ au_sync();
+
+}
+
+static unsigned long
+au1200fb_alloc_fbmem (unsigned long size)
+{
+ /* __get_free_pages() fulfills a max request of 2MB */
+ /* do multiple requests to obtain large contigous mem */
+#define MAX_GFP 0x00200000
+
+ unsigned long mem, amem, alloced = 0, allocsize;
+
+ size += 0x1000;
+ allocsize = (size < MAX_GFP) ? size : MAX_GFP;
+
+ /* Get first chunk */
+ mem = (unsigned long )
+ __get_free_pages(GFP_ATOMIC | GFP_DMA, get_order(allocsize));
+ if (mem != 0) alloced = allocsize;
+
+ /* Get remaining, contiguous chunks */
+ while (alloced < size)
+ {
+ amem = (unsigned long )
+ __get_free_pages(GFP_ATOMIC | GFP_DMA, get_order(allocsize));
+ if (amem != 0)
+ alloced += allocsize;
+
+ /* check for contiguous mem alloced */
+ if ((amem == 0) || (amem + allocsize) != mem)
+ break;
+ else
+ mem = amem;
+ }
+ return mem;
+}
+
+int __init au1200fb_init(void)
+{
+ int num_panels = sizeof(panels)/sizeof(struct panel_settings);
+ struct au1200fb_info *fb_info;
+ struct display *disp;
+ struct au1200fb_par *par;
+ unsigned long page;
+ int plane, bpp;
+
+ /*
+ * Get the panel information/display mode
+ */
+ if (panel_index < 0)
+ panel_index = board_au1200fb_panel();
+ if ((panel_index < 0) || (panel_index >= num_panels)) {
+ printk("ERROR: INVALID PANEL %d\n", panel_index);
+ return -EINVAL;
+ }
+ panel = &panels[panel_index];
+ win = &windows[window_index];
+
+ printk("au1200fb: Panel %d %s\n", panel_index, panel->name);
+ printk("au1200fb: Win %d %s\n", window_index, win->name);
+
+ /* Global setup/init */
+ au1200_setpanel(panel);
+ lcd->intenable = 0;
+ lcd->intstatus = ~0;
+ lcd->backcolor = win->mode_backcolor;
+ lcd->winenable = 0;
+
+ /* Setup Color Key - FIX!!! */
+ lcd->colorkey = win->mode_colorkey;
+ lcd->colorkeymsk = win->mode_colorkeymsk;
+
+ /* Setup HWCursor - FIX!!! Need to support this eventually */
+ lcd->hwc.cursorctrl = 0;
+ lcd->hwc.cursorpos = 0;
+ lcd->hwc.cursorcolor0 = 0;
+ lcd->hwc.cursorcolor1 = 0;
+ lcd->hwc.cursorcolor2 = 0;
+ lcd->hwc.cursorcolor3 = 0;
+
+ /* Register each plane as a frame buffer device */
+ for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
+ {
+ fb_info = &fb_infos[plane];
+ disp = &disps[plane];
+ par = &fb_pars[plane];
+
+ bpp = winbpp(win->w[plane].mode_winctrl1);
+ if (win->w[plane].xres == 0)
+ win->w[plane].xres = panel->Xres;
+ if (win->w[plane].yres == 0)
+ win->w[plane].yres = panel->Yres;
+
+ par->var.xres =
+ par->var.xres_virtual = win->w[plane].xres;
+ par->var.yres =
+ par->var.yres_virtual = win->w[plane].yres;
+ par->var.bits_per_pixel = bpp;
+ par->line_length = win->w[plane].xres * bpp / 8; /* in bytes */
+ /*
+ * Allocate LCD framebuffer from system memory
+ * Set page reserved so that mmap will work. This is necessary
+ * since we'll be remapping normal memory.
+ */
+ fb_info->fb_size = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
+ fb_info->fb_virt_start = au1200fb_alloc_fbmem(fb_info->fb_size);
+ if (!fb_info->fb_virt_start) {
+ printk("Unable to allocate fb memory\n");
+ return -ENOMEM;
+ }
+ fb_info->fb_phys = virt_to_bus((void *)fb_info->fb_virt_start);
+ for (page = fb_info->fb_virt_start;
+ page < PAGE_ALIGN(fb_info->fb_virt_start + fb_info->fb_size);
+ page += PAGE_SIZE) {
+ SetPageReserved(virt_to_page(page));
+ }
+ /* Convert to kseg1 */
+ fb_info->fb_virt_start =
+ (void *)((u32)fb_info->fb_virt_start | 0xA0000000);
+ /* FIX!!! may wish to avoid this to save startup time??? */
+ memset((void *)fb_info->fb_virt_start, 0, fb_info->fb_size);
+
+ fb_info->gen.parsize = sizeof(struct au1200fb_par);
+ fb_info->gen.fbhw = &au1200_switch;
+ strcpy(fb_info->gen.info.modename, "Au1200 LCD");
+ fb_info->gen.info.changevar = NULL;
+ fb_info->gen.info.node = -1;
+
+ fb_info->gen.info.fbops = &au1200fb_ops;
+ fb_info->gen.info.disp = disp;
+ fb_info->gen.info.switch_con = &fbgen_switch;
+ fb_info->gen.info.updatevar = &fbgen_update_var;
+ fb_info->gen.info.blank = &fbgen_blank;
+ fb_info->gen.info.flags = FBINFO_FLAG_DEFAULT;
+
+ fb_info->nohwcursor = 1;
+ fb_info->noblanking = 1;
+
+ /* This should give a reasonable default video mode */
+ fbgen_get_var(&disp->var, -1, &fb_info->gen.info);
+ fbgen_do_set_var(&disp->var, 1, &fb_info->gen);
+ fbgen_set_disp(-1, &fb_info->gen);
+ fbgen_install_cmap(0, &fb_info->gen);
+
+ /* Turn on plane */
+ au1200_setmode(plane);
+
+ if (register_framebuffer(&fb_info->gen.info) < 0)
+ return -EINVAL;
+
+ printk(KERN_INFO "fb%d: %s plane %d @ %08X (%d x %d x %d)\n",
+ GET_FB_IDX(fb_info->gen.info.node),
+ fb_info->gen.info.modename, plane, fb_info->fb_phys,
+ win->w[plane].xres, win->w[plane].yres, bpp);
+ }
+ /* uncomment this if your driver cannot be unloaded */
+ /* MOD_INC_USE_COUNT; */
+ return 0;
+}
+
+void au1200fb_setup(char *options, int *ints)
+{
+ char* this_opt;
+ int i;
+ int num_panels = sizeof(panels)/sizeof(struct panel_settings);
+
+ if (!options || !*options)
+ return;
+
+ for(this_opt=strtok(options, ","); this_opt;
+ this_opt=strtok(NULL, ",")) {
+ if (!strncmp(this_opt, "panel:", 6)) {
+ int i;
+ long int li;
+ char *endptr;
+ this_opt += 6;
+
+ /* Panel name can be name, "bs" for board-switch, or number/index */
+ li = simple_strtol(this_opt, &endptr, 0);
+ if (*endptr == '\0') {
+ panel_index = (int)li;
+ }
+ else if (strcmp(this_opt, "bs") == 0) {
+ panel_index = board_au1200fb_panel();
+ }
+ else
+ for (i=0; i<num_panels; i++) {
+ if (!strcmp(this_opt, panels[i].name)) {
+ panel_index = i;
+ break;
+ }
+ }
+ }
+ else if (!strncmp(this_opt, "nohwcursor", 10)) {
+ printk("nohwcursor\n");
+ fb_infos[0].nohwcursor = 1;
+ }
+ }
+
+ printk("au1200fb: Panel %d %s\n", panel_index,
+ panels[panel_index].name);
+}
+
+
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Au1200 LCD framebuffer driver");
+
+void au1200fb_cleanup(struct fb_info *info)
+{
+ unregister_framebuffer(info);
+}
+
+module_init(au1200fb_init);
+module_exit(au1200fb_cleanup);
+#endif /* MODULE */
+
+
Index: linux-2.4.35.4/drivers/video/au1200fb.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/video/au1200fb.h
@@ -0,0 +1,288 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Hardware definitions for the Au1200 LCD controller
+ *
+ * Copyright 2004 AMD
+ * Author: AMD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _AU1200LCD_H
+#define _AU1200LCD_H
+
+/********************************************************************/
+#define AU1200_LCD_ADDR 0xB5000000
+
+#define uint8 unsigned char
+#define uint32 unsigned int
+
+typedef volatile struct
+{
+ uint32 reserved0;
+ uint32 screen;
+ uint32 backcolor;
+ uint32 horztiming;
+ uint32 verttiming;
+ uint32 clkcontrol;
+ uint32 pwmdiv;
+ uint32 pwmhi;
+ uint32 reserved1;
+ uint32 winenable;
+ uint32 colorkey;
+ uint32 colorkeymsk;
+ struct
+ {
+ uint32 cursorctrl;
+ uint32 cursorpos;
+ uint32 cursorcolor0;
+ uint32 cursorcolor1;
+ uint32 cursorcolor2;
+ uint32 cursorcolor3;
+ } hwc;
+ uint32 intstatus;
+ uint32 intenable;
+ uint32 outmask;
+ uint32 fifoctrl;
+ uint32 reserved2[(0x0100-0x0058)/4];
+ struct
+ {
+ uint32 winctrl0;
+ uint32 winctrl1;
+ uint32 winctrl2;
+ uint32 winbuf0;
+ uint32 winbuf1;
+ uint32 winbufctrl;
+ uint32 winreserved0;
+ uint32 winreserved1;
+ } window[4];
+
+ uint32 reserved3[(0x0400-0x0180)/4];
+
+ uint32 palette[(0x0800-0x0400)/4];
+
+ uint8 cursorpattern[256];
+
+} AU1200_LCD;
+
+/* lcd_screen */
+#define LCD_SCREEN_SEN (1<<31)
+#define LCD_SCREEN_SX (0x07FF<<19)
+#define LCD_SCREEN_SY (0x07FF<< 8)
+#define LCD_SCREEN_SWP (1<<7)
+#define LCD_SCREEN_SWD (1<<6)
+#define LCD_SCREEN_ST (7<<0)
+#define LCD_SCREEN_ST_TFT (0<<0)
+#define LCD_SCREEN_SX_N(WIDTH) ((WIDTH-1)<<19)
+#define LCD_SCREEN_SY_N(HEIGHT) ((HEIGHT-1)<<8)
+#define LCD_SCREEN_ST_CSTN (1<<0)
+#define LCD_SCREEN_ST_CDSTN (2<<0)
+#define LCD_SCREEN_ST_M8STN (3<<0)
+#define LCD_SCREEN_ST_M4STN (4<<0)
+
+/* lcd_backcolor */
+#define LCD_BACKCOLOR_SBGR (0xFF<<16)
+#define LCD_BACKCOLOR_SBGG (0xFF<<8)
+#define LCD_BACKCOLOR_SBGB (0xFF<<0)
+#define LCD_BACKCOLOR_SBGR_N(N) ((N)<<16)
+#define LCD_BACKCOLOR_SBGG_N(N) ((N)<<8)
+#define LCD_BACKCOLOR_SBGB_N(N) ((N)<<0)
+
+/* lcd_winenable */
+#define LCD_WINENABLE_WEN3 (1<<3)
+#define LCD_WINENABLE_WEN2 (1<<2)
+#define LCD_WINENABLE_WEN1 (1<<1)
+#define LCD_WINENABLE_WEN0 (1<<0)
+
+/* lcd_colorkey */
+#define LCD_COLORKEY_CKR (0xFF<<16)
+#define LCD_COLORKEY_CKG (0xFF<<8)
+#define LCD_COLORKEY_CKB (0xFF<<0)
+#define LCD_COLORKEY_CKR_N(N) ((N)<<16)
+#define LCD_COLORKEY_CKG_N(N) ((N)<<8)
+#define LCD_COLORKEY_CKB_N(N) ((N)<<0)
+
+/* lcd_colorkeymsk */
+#define LCD_COLORKEYMSK_CKMR (0xFF<<16)
+#define LCD_COLORKEYMSK_CKMG (0xFF<<8)
+#define LCD_COLORKEYMSK_CKMB (0xFF<<0)
+#define LCD_COLORKEYMSK_CKMR_N(N) ((N)<<16)
+#define LCD_COLORKEYMSK_CKMG_N(N) ((N)<<8)
+#define LCD_COLORKEYMSK_CKMB_N(N) ((N)<<0)
+
+/* lcd windows control 0 */
+#define LCD_WINCTRL0_OX (0x07FF<<21)
+#define LCD_WINCTRL0_OY (0x07FF<<10)
+#define LCD_WINCTRL0_A (0x00FF<<2)
+#define LCD_WINCTRL0_AEN (1<<1)
+#define LCD_WINCTRL0_OX_N(N) ((N)<<21)
+#define LCD_WINCTRL0_OY_N(N) ((N)<<10)
+#define LCD_WINCTRL0_A_N(N) ((N)<<2)
+
+/* lcd windows control 1 */
+#define LCD_WINCTRL1_PRI (3<<30)
+#define LCD_WINCTRL1_PIPE (1<<29)
+#define LCD_WINCTRL1_FRM (0xF<<25)
+#define LCD_WINCTRL1_CCO (1<<24)
+#define LCD_WINCTRL1_PO (3<<22)
+#define LCD_WINCTRL1_SZX (0x07FF<<11)
+#define LCD_WINCTRL1_SZY (0x07FF<<0)
+#define LCD_WINCTRL1_FRM_1BPP (0<<25)
+#define LCD_WINCTRL1_FRM_2BPP (1<<25)
+#define LCD_WINCTRL1_FRM_4BPP (2<<25)
+#define LCD_WINCTRL1_FRM_8BPP (3<<25)
+#define LCD_WINCTRL1_FRM_12BPP (4<<25)
+#define LCD_WINCTRL1_FRM_16BPP655 (5<<25)
+#define LCD_WINCTRL1_FRM_16BPP565 (6<<25)
+#define LCD_WINCTRL1_FRM_16BPP556 (7<<25)
+#define LCD_WINCTRL1_FRM_16BPPI1555 (8<<25)
+#define LCD_WINCTRL1_FRM_16BPPI5551 (9<<25)
+#define LCD_WINCTRL1_FRM_16BPPA1555 (10<<25)
+#define LCD_WINCTRL1_FRM_16BPPA5551 (11<<25)
+#define LCD_WINCTRL1_FRM_24BPP (12<<25)
+#define LCD_WINCTRL1_FRM_32BPP (13<<25)
+#define LCD_WINCTRL1_PRI_N(N) ((N)<<30)
+#define LCD_WINCTRL1_PO_00 (0<<22)
+#define LCD_WINCTRL1_PO_01 (1<<22)
+#define LCD_WINCTRL1_PO_10 (2<<22)
+#define LCD_WINCTRL1_PO_11 (3<<22)
+#define LCD_WINCTRL1_SZX_N(N) ((N-1)<<11)
+#define LCD_WINCTRL1_SZY_N(N) ((N-1)<<0)
+
+/* lcd windows control 2 */
+#define LCD_WINCTRL2_CKMODE (3<<24)
+#define LCD_WINCTRL2_DBM (1<<23)
+#define LCD_WINCTRL2_RAM (3<<21)
+#define LCD_WINCTRL2_BX (0x1FFF<<8)
+#define LCD_WINCTRL2_SCX (0xF<<4)
+#define LCD_WINCTRL2_SCY (0xF<<0)
+#define LCD_WINCTRL2_CKMODE_00 (0<<24)
+#define LCD_WINCTRL2_CKMODE_01 (1<<24)
+#define LCD_WINCTRL2_CKMODE_10 (2<<24)
+#define LCD_WINCTRL2_CKMODE_11 (3<<24)
+#define LCD_WINCTRL2_RAM_NONE (0<<21)
+#define LCD_WINCTRL2_RAM_PALETTE (1<<21)
+#define LCD_WINCTRL2_RAM_GAMMA (2<<21)
+#define LCD_WINCTRL2_RAM_BUFFER (3<<21)
+#define LCD_WINCTRL2_BX_N(N) ((N)<<8)
+#define LCD_WINCTRL2_SCX_1 (0<<4)
+#define LCD_WINCTRL2_SCX_2 (1<<4)
+#define LCD_WINCTRL2_SCX_4 (2<<4)
+#define LCD_WINCTRL2_SCY_1 (0<<0)
+#define LCD_WINCTRL2_SCY_2 (1<<0)
+#define LCD_WINCTRL2_SCY_4 (2<<0)
+
+/* lcd windows buffer control */
+#define LCD_WINBUFCTRL_DB (1<<1)
+#define LCD_WINBUFCTRL_DBN (1<<0)
+
+/* lcd_intstatus, lcd_intenable */
+#define LCD_INT_IFO (0xF<<14)
+#define LCD_INT_IFU (0xF<<10)
+#define LCD_INT_OFO (1<<9)
+#define LCD_INT_OFU (1<<8)
+#define LCD_INT_WAIT (1<<3)
+#define LCD_INT_SD (1<<2)
+#define LCD_INT_SA (1<<1)
+#define LCD_INT_SS (1<<0)
+
+/* lcd_horztiming */
+#define LCD_HORZTIMING_HND2 (0x1FF<<18)
+#define LCD_HORZTIMING_HND1 (0x1FF<<9)
+#define LCD_HORZTIMING_HPW (0x1FF<<0)
+#define LCD_HORZTIMING_HND2_N(N)(((N)-1)<<18)
+#define LCD_HORZTIMING_HND1_N(N)(((N)-1)<<9)
+#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<0)
+
+/* lcd_verttiming */
+#define LCD_VERTTIMING_VND2 (0x1FF<<18)
+#define LCD_VERTTIMING_VND1 (0x1FF<<9)
+#define LCD_VERTTIMING_VPW (0x1FF<<0)
+#define LCD_VERTTIMING_VND2_N(N)(((N)-1)<<18)
+#define LCD_VERTTIMING_VND1_N(N)(((N)-1)<<9)
+#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<0)
+
+/* lcd_clkcontrol */
+#define LCD_CLKCONTROL_EXT (1<<22)
+#define LCD_CLKCONTROL_DELAY (3<<20)
+#define LCD_CLKCONTROL_CDD (1<<19)
+#define LCD_CLKCONTROL_IB (1<<18)
+#define LCD_CLKCONTROL_IC (1<<17)
+#define LCD_CLKCONTROL_IH (1<<16)
+#define LCD_CLKCONTROL_IV (1<<15)
+#define LCD_CLKCONTROL_BF (0x1F<<10)
+#define LCD_CLKCONTROL_PCD (0x3FF<<0)
+#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10)
+#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0)
+
+/* lcd_pwmdiv */
+#define LCD_PWMDIV_EN (1<<31)
+#define LCD_PWMDIV_PWMDIV (0x1FFFF<<0)
+#define LCD_PWMDIV_PWMDIV_N(N) ((N)<<0)
+
+/* lcd_pwmhi */
+#define LCD_PWMHI_PWMHI1 (0xFFFF<<16)
+#define LCD_PWMHI_PWMHI0 (0xFFFF<<0)
+#define LCD_PWMHI_PWMHI1_N(N) ((N)<<16)
+#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0)
+
+/* lcd_hwccon */
+#define LCD_HWCCON_EN (1<<0)
+
+/* lcd_cursorpos */
+#define LCD_CURSORPOS_HWCXOFF (0x1F<<27)
+#define LCD_CURSORPOS_HWCXPOS (0x07FF<<16)
+#define LCD_CURSORPOS_HWCYOFF (0x1F<<11)
+#define LCD_CURSORPOS_HWCYPOS (0x07FF<<0)
+#define LCD_CURSORPOS_HWCXOFF_N(N) ((N)<<27)
+#define LCD_CURSORPOS_HWCXPOS_N(N) ((N)<<16)
+#define LCD_CURSORPOS_HWCYOFF_N(N) ((N)<<11)
+#define LCD_CURSORPOS_HWCYPOS_N(N) ((N)<<0)
+
+/* lcd_cursorcolor */
+#define LCD_CURSORCOLOR_HWCA (0xFF<<24)
+#define LCD_CURSORCOLOR_HWCR (0xFF<<16)
+#define LCD_CURSORCOLOR_HWCG (0xFF<<8)
+#define LCD_CURSORCOLOR_HWCB (0xFF<<0)
+#define LCD_CURSORCOLOR_HWCA_N(N) ((N)<<24)
+#define LCD_CURSORCOLOR_HWCR_N(N) ((N)<<16)
+#define LCD_CURSORCOLOR_HWCG_N(N) ((N)<<8)
+#define LCD_CURSORCOLOR_HWCB_N(N) ((N)<<0)
+
+/* lcd_fifoctrl */
+#define LCD_FIFOCTRL_F3IF (1<<29)
+#define LCD_FIFOCTRL_F3REQ (0x1F<<24)
+#define LCD_FIFOCTRL_F2IF (1<<29)
+#define LCD_FIFOCTRL_F2REQ (0x1F<<16)
+#define LCD_FIFOCTRL_F1IF (1<<29)
+#define LCD_FIFOCTRL_F1REQ (0x1F<<8)
+#define LCD_FIFOCTRL_F0IF (1<<29)
+#define LCD_FIFOCTRL_F0REQ (0x1F<<0)
+#define LCD_FIFOCTRL_F3REQ_N(N) ((N-1)<<24)
+#define LCD_FIFOCTRL_F2REQ_N(N) ((N-1)<<16)
+#define LCD_FIFOCTRL_F1REQ_N(N) ((N-1)<<8)
+#define LCD_FIFOCTRL_F0REQ_N(N) ((N-1)<<0)
+
+/* lcd_outmask */
+#define LCD_OUTMASK_MASK (0x00FFFFFF)
+
+/********************************************************************/
+#endif /* _AU1200LCD_H */
Index: linux-2.4.35.4/drivers/video/Config.in
===================================================================
--- linux-2.4.35.4.orig/drivers/video/Config.in
+++ linux-2.4.35.4/drivers/video/Config.in
@@ -87,8 +87,8 @@ if [ "$CONFIG_FB" = "y" ]; then
if [ "$CONFIG_HP300" = "y" ]; then
define_bool CONFIG_FB_HP300 y
fi
- if [ "$ARCH" = "alpha" ]; then
- tristate ' TGA framebuffer support' CONFIG_FB_TGA
+ if [ "$ARCH" = "alpha" -o "$CONFIG_TC" = "y" ]; then
+ tristate ' TGA/SFB+ framebuffer support' CONFIG_FB_TGA
fi
if [ "$CONFIG_X86" = "y" ]; then
bool ' VESA VGA graphics console' CONFIG_FB_VESA
@@ -121,6 +121,17 @@ if [ "$CONFIG_FB" = "y" ]; then
hex ' Framebuffer Base Address' CONFIG_E1355_FB_BASE a8200000
fi
fi
+ if [ "$CONFIG_SOC_AU1100" = "y" ]; then
+ bool ' Au1100 LCD Driver' CONFIG_FB_AU1100
+ fi
+
+ if [ "$CONFIG_SOC_AU1200" = "y" ]; then
+ bool ' Au1200 LCD Driver' CONFIG_FB_AU1200
+ if [ "$CONFIG_FB_AU1200" = "y" ]; then
+ int ' Number of planes (1 to 4)' CONFIG_FB_AU1200_DEVS 1
+ fi
+ fi
+
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
if [ "$CONFIG_PCI" != "n" ]; then
tristate ' Matrox acceleration (EXPERIMENTAL)' CONFIG_FB_MATROX
@@ -178,9 +189,6 @@ if [ "$CONFIG_FB" = "y" ]; then
bool ' Use CRT on Pb1100 ' CONFIG_PB1500_CRT
bool ' Use TFT Panel on Pb1100 ' CONFIG_PB1500_TFT
fi
- if [ "$CONFIG_SOC_AU1100" = "y" ]; then
- bool ' Au1100 LCD Driver' CONFIG_FB_AU1100
- fi
fi
fi
fi
Index: linux-2.4.35.4/drivers/video/fbmem.c
===================================================================
--- linux-2.4.35.4.orig/drivers/video/fbmem.c
+++ linux-2.4.35.4/drivers/video/fbmem.c
@@ -139,6 +139,8 @@ extern int e1356fb_init(void);
extern int e1356fb_setup(char*);
extern int au1100fb_init(void);
extern int au1100fb_setup(char*);
+extern int au1200fb_init(void);
+extern int au1200fb_setup(char*);
extern int pvr2fb_init(void);
extern int pvr2fb_setup(char*);
extern int sstfb_init(void);
@@ -331,6 +333,9 @@ static struct {
#ifdef CONFIG_FB_AU1100
{ "au1100fb", au1100fb_init, au1100fb_setup },
#endif
+#ifdef CONFIG_FB_AU1200
+ { "au1200fb", au1200fb_init, au1200fb_setup },
+#endif
#ifdef CONFIG_FB_IT8181
{ "it8181fb", it8181fb_init, it8181fb_setup },
#endif
Index: linux-2.4.35.4/drivers/video/ims332.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/drivers/video/ims332.h
@@ -0,0 +1,275 @@
+/*
+ * linux/drivers/video/ims332.h
+ *
+ * Copyright 2003 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+#include <linux/types.h>
+
+/*
+ * IMS332 16-bit wide, 128-bit aligned registers.
+ */
+struct _ims332_reg {
+ volatile u16 r;
+ u16 pad[7];
+};
+
+struct _ims332_regs {
+#define IMS332_BOOT_PLL_MUTLIPLIER 0x00001f
+#define IMS332_BOOT_CLOCK_SOURCE_SEL 0x000020
+#define IMS332_BOOT_ADDRESS_ALIGNMENT 0x000040
+#define IMS332_BOOT_WRITE_ZERO 0xffff80
+ struct _ims332_reg boot;
+ struct _ims332_reg pad0[0x020 - 0x000];
+ struct _ims332_reg half_sync;
+ struct _ims332_reg back_porch;
+ struct _ims332_reg display;
+ struct _ims332_reg short_display;
+ struct _ims332_reg broad_pulse;
+ struct _ims332_reg vsync;
+ struct _ims332_reg vpre_equalise;
+ struct _ims332_reg vpost_equalise;
+ struct _ims332_reg vblank;
+ struct _ims332_reg vdisplay;
+ struct _ims332_reg line_time;
+ struct _ims332_reg line_start;
+ struct _ims332_reg mem_init;
+ struct _ims332_reg transfer_delay;
+ struct _ims332_reg pad1[0x03f - 0x02e];
+ struct _ims332_reg pixel_address_mask;
+ struct _ims332_reg pad2[0x05f - 0x040];
+
+#define IMS332_CTRL_A_BOOT_ENABLE_VTG 0x000001
+#define IMS332_CTRL_A_SCREEN_FORMAT 0x000002
+#define IMS332_CTRL_A_INTERLACED_STANDARD 0x000004
+#define IMS332_CTRL_A_OPERATING_MODE 0x000008
+#define IMS332_CTRL_A_FRAME_FLYBACK_PATTERN 0x000010
+#define IMS332_CTRL_A_DIGITAL_SYNC_FORMAT 0x000020
+#define IMS332_CTRL_A_ANALOGUE_VIDEO_FORMAT 0x000040
+#define IMS332_CTRL_A_BLANK_LEVEL 0x000080
+#define IMS332_CTRL_A_BLANK_IO 0x000100
+#define IMS332_CTRL_A_BLANK_FUNCTION_SWITCH 0x000200
+#define IMS332_CTRL_A_FORCE_BLANKING 0x000400
+#define IMS332_CTRL_A_TURN_OFF_BLANKING 0x000800
+#define IMS332_CTRL_A_VRAM_ADDRESS_INCREMENT 0x003000
+#define IMS332_CTRL_A_TURN_OFF_DMA 0x004000
+#define IMS332_CTRL_A_SYNC_DELAY 0x038000
+#define IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING 0x040000
+#define IMS332_CTRL_A_DELAYED_SAMPLING 0x080000
+#define IMS332_CTRL_A_BITS_PER_PIXEL 0x700000
+#define IMS332_CTRL_A_CURSOR_DISABLE 0x800000
+ struct _ims332_reg config_control_a;
+ struct _ims332_reg pad3[0x06f - 0x060];
+
+#define IMS332_CTRL_B_WRITE_ZERO 0xffffff
+ struct _ims332_reg config_control_b;
+ struct _ims332_reg pad4[0x07f - 0x070];
+ struct _ims332_reg screen_top;
+ struct _ims332_reg pad5[0x0a0 - 0x080];
+ /* cursor color palette, 3 entries, reg no. 0xa1 - 0xa3 */
+ struct _ims332_reg cursor_color_palette0;
+ struct _ims332_reg cursor_color_palette1;
+ struct _ims332_reg cursor_color_palette2;
+ struct _ims332_reg pad6[0x0bf - 0x0a3];
+ struct _ims332_reg rgb_frame_checksum0;
+ struct _ims332_reg rgb_frame_checksum1;
+ struct _ims332_reg rgb_frame_checksum2;
+ struct _ims332_reg pad7[0x0c6 - 0x0c2];
+ struct _ims332_reg cursor_start;
+ struct _ims332_reg pad8[0x0ff - 0x0c7];
+ /* color palette, 256 entries of form 0x00BBGGRR, reg no. 0x100 - 0x1ff */
+ struct _ims332_reg color_palette[0x1ff - 0x0ff];
+ /* hardware cursor bitmap, reg no. 0x200 - 0x3ff */
+ struct _ims332_reg cursor_ram[0x3ff - 0x1ff];
+};
+
+/*
+ * In the functions below we use some weird looking helper variables to
+ * access most members of this struct, otherwise the compiler splits
+ * the read/write in two byte accesses.
+ */
+struct ims332_regs {
+ struct _ims332_regs rw;
+ char pad0[0x80000 - sizeof (struct _ims332_regs)];
+ struct _ims332_regs r;
+ char pad1[0xa0000 - (sizeof (struct _ims332_regs) + 0x80000)];
+ struct _ims332_regs w;
+} __attribute__((packed));
+
+static inline void ims332_control_reg_bits(struct ims332_regs *regs, u32 mask,
+ u32 val)
+{
+ volatile u16 *ctr = &(regs->r.config_control_a.r);
+ volatile u16 *ctw = &(regs->w.config_control_a.r);
+ u32 ctrl;
+
+ mb();
+ ctrl = *ctr;
+ rmb();
+ ctrl |= ((regs->rw.boot.r << 8) & 0x00ff0000);
+ ctrl |= val & mask;
+ ctrl &= ~(~val & mask);
+ wmb();
+ regs->rw.boot.r = (ctrl >> 8) & 0xff00;
+ wmb();
+ *ctw = ctrl & 0xffff;
+}
+
+/* FIXME: This is maxinefb specific. */
+static inline void ims332_bootstrap(struct ims332_regs *regs)
+{
+ volatile u16 *ctw = &(regs->w.config_control_a.r);
+ u32 ctrl = IMS332_CTRL_A_BOOT_ENABLE_VTG | IMS332_CTRL_A_TURN_OFF_DMA;
+
+ /* bootstrap sequence */
+ mb();
+ regs->rw.boot.r = 0;
+ wmb();
+ *ctw = 0;
+
+ /* init control A register */
+ wmb();
+ regs->rw.boot.r = (ctrl >> 8) & 0xff00;
+ wmb();
+ *ctw = ctrl & 0xffff;
+}
+
+static inline void ims332_blank_screen(struct ims332_regs *regs, int blank)
+{
+ ims332_control_reg_bits(regs, IMS332_CTRL_A_FORCE_BLANKING,
+ blank ? IMS332_CTRL_A_FORCE_BLANKING : 0);
+}
+
+static inline void ims332_set_color_depth(struct ims332_regs *regs, u32 depth)
+{
+ u32 dp;
+ u32 mask = (IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING
+ | IMS332_CTRL_A_DELAYED_SAMPLING
+ | IMS332_CTRL_A_BITS_PER_PIXEL);
+
+ switch (depth) {
+ case 1: dp = 0 << 20; break;
+ case 2: dp = 1 << 20; break;
+ case 4: dp = 2 << 20; break;
+ case 8: dp = 3 << 20; break;
+ case 15: dp = (4 << 20) | IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING; break;
+ case 16: dp = (5 << 20) | IMS332_CTRL_A_PIXEL_PORT_INTERLEAVING; break;
+ default: return;
+ }
+ ims332_control_reg_bits(regs, mask, dp);
+
+ if (depth <= 8) {
+ volatile u16 *pmask = &(regs->w.pixel_address_mask.r);
+ u32 dm = (1 << depth) - 1;
+
+ wmb();
+ regs->rw.boot.r = dm << 8;
+ wmb();
+ *pmask = dm << 8 | dm;
+ }
+}
+
+static inline void ims332_set_screen_top(struct ims332_regs *regs, u16 top)
+{
+ volatile u16 *st = &(regs->w.screen_top.r);
+
+ mb();
+ *st = top & 0xffff;
+}
+
+static inline void ims332_enable_cursor(struct ims332_regs *regs, int on)
+{
+ ims332_control_reg_bits(regs, IMS332_CTRL_A_CURSOR_DISABLE,
+ on ? 0 : IMS332_CTRL_A_CURSOR_DISABLE);
+}
+
+static inline void ims332_position_cursor(struct ims332_regs *regs,
+ u16 x, u16 y)
+{
+ volatile u16 *cp = &(regs->w.cursor_start.r);
+ u32 val = ((x & 0xfff) << 12) | (y & 0xfff);
+
+ if (x > 2303 || y > 2303)
+ return;
+
+ mb();
+ regs->rw.boot.r = (val >> 8) & 0xff00;
+ wmb();
+ *cp = val & 0xffff;
+}
+
+static inline void ims332_set_font(struct ims332_regs *regs, u8 fgc,
+ u16 width, u16 height)
+{
+ volatile u16 *cp0 = &(regs->w.cursor_color_palette0.r);
+ int i;
+
+ mb();
+ for (i = 0; i < 0x200; i++) {
+ volatile u16 *cram = &(regs->w.cursor_ram[i].r);
+
+ if (height << 6 <= i << 3)
+ *cram = 0x0000;
+ else if (width <= i % 8 << 3)
+ *cram = 0x0000;
+ else if (((width >> 3) & 0xffff) > i % 8)
+ *cram = 0x5555;
+ else
+ *cram = 0x5555 & ~(0xffff << (width % 8 << 1));
+ wmb();
+ }
+ regs->rw.boot.r = fgc << 8;
+ wmb();
+ *cp0 = fgc << 8 | fgc;
+}
+
+static inline void ims332_read_cmap(struct ims332_regs *regs, u8 reg,
+ u8* red, u8* green, u8* blue)
+{
+ volatile u16 *rptr = &(regs->r.color_palette[reg].r);
+ u16 val;
+
+ mb();
+ val = *rptr;
+ *red = val & 0xff;
+ *green = (val >> 8) & 0xff;
+ rmb();
+ *blue = (regs->rw.boot.r >> 8) & 0xff;
+}
+
+static inline void ims332_write_cmap(struct ims332_regs *regs, u8 reg,
+ u8 red, u8 green, u8 blue)
+{
+ volatile u16 *wptr = &(regs->w.color_palette[reg].r);
+
+ mb();
+ regs->rw.boot.r = blue << 8;
+ wmb();
+ *wptr = (green << 8) + red;
+}
+
+static inline void ims332_dump_regs(struct ims332_regs *regs)
+{
+ int i;
+
+ printk(__FUNCTION__);
+ ims332_control_reg_bits(regs, IMS332_CTRL_A_BOOT_ENABLE_VTG, 0);
+ for (i = 0; i < 0x100; i++) {
+ volatile u16 *cpad = (u16 *)((char *)(&regs->r) + sizeof(struct _ims332_reg) * i);
+ u32 val;
+
+ val = *cpad;
+ rmb();
+ val |= regs->rw.boot.r << 8;
+ rmb();
+ if (! (i % 8))
+ printk("\n%02x:", i);
+ printk(" %06x", val);
+ }
+ ims332_control_reg_bits(regs, IMS332_CTRL_A_BOOT_ENABLE_VTG,
+ IMS332_CTRL_A_BOOT_ENABLE_VTG);
+ printk("\n");
+}
Index: linux-2.4.35.4/drivers/video/Makefile
===================================================================
--- linux-2.4.35.4.orig/drivers/video/Makefile
+++ linux-2.4.35.4/drivers/video/Makefile
@@ -87,6 +87,7 @@ obj-$(CONFIG_FB_PMAGB_B) += pma
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
obj-$(CONFIG_FB_TX3912) += tx3912fb.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o
+obj-$(CONFIG_FB_AU1200) += au1200fb.o fbgen.o
obj-$(CONFIG_FB_IT8181) += it8181fb.o fbgen.o
subdir-$(CONFIG_STI_CONSOLE) += sti
Index: linux-2.4.35.4/drivers/video/maxinefb.h
===================================================================
--- linux-2.4.35.4.orig/drivers/video/maxinefb.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * linux/drivers/video/maxinefb.h
- *
- * DECstation 5000/xx onboard framebuffer support, Copyright (C) 1999 by
- * Michael Engel <engel@unix-ag.org> and Karsten Merker <merker@guug.de>
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <asm/addrspace.h>
-
-/*
- * IMS332 video controller register base address
- */
-#define MAXINEFB_IMS332_ADDRESS KSEG1ADDR(0x1c140000)
-
-/*
- * Begin of DECstation 5000/xx onboard framebuffer memory, default resolution
- * is 1024x768x8
- */
-#define DS5000_xx_ONBOARD_FBMEM_START KSEG1ADDR(0x0a000000)
-
-/*
- * The IMS 332 video controller used in the DECstation 5000/xx series
- * uses 32 bits wide registers; the following defines declare the
- * register numbers, to get the real offset, these have to be multiplied
- * by four.
- */
-
-#define IMS332_REG_CURSOR_RAM 0x200 /* hardware cursor bitmap */
-
-/*
- * The color palette entries have the form 0x00BBGGRR
- */
-#define IMS332_REG_COLOR_PALETTE 0x100 /* color palette, 256 entries */
-#define IMS332_REG_CURSOR_COLOR_PALETTE 0x0a1 /* cursor color palette, */
- /* 3 entries */
Index: linux-2.4.35.4/drivers/video/newport_con.c
===================================================================
--- linux-2.4.35.4.orig/drivers/video/newport_con.c
+++ linux-2.4.35.4/drivers/video/newport_con.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/slab.h>
+#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/page.h>
@@ -77,7 +78,7 @@ static int newport_set_def_font(int unit
static inline void newport_render_background(int xstart, int ystart,
int xend, int yend, int ci)
{
- newport_wait();
+ newport_wait(npregs);
npregs->set.wrmask = 0xffffffff;
npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
@@ -94,7 +95,7 @@ static inline void newport_init_cmap(voi
unsigned short i;
for (i = 0; i < 16; i++) {
- newport_bfwait();
+ newport_bfwait(npregs);
newport_cmap_setaddr(npregs, color_table[i]);
newport_cmap_setrgb(npregs,
default_red[i],
@@ -107,7 +108,7 @@ static inline void newport_show_logo(voi
unsigned long i;
for (i = 0; i < LINUX_LOGO_COLORS; i++) {
- newport_bfwait();
+ newport_bfwait(npregs);
newport_cmap_setaddr(npregs, i + 0x20);
newport_cmap_setrgb(npregs,
linux_logo_red[i],
@@ -115,13 +116,13 @@ static inline void newport_show_logo(voi
linux_logo_blue[i]);
}
- newport_wait();
+ newport_wait(npregs);
npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
NPORT_DMODE0_CHOST);
npregs->set.xystarti = ((newport_xsize - LOGO_W) << 16) | (0);
npregs->set.xyendi = ((newport_xsize - 1) << 16);
- newport_wait();
+ newport_wait(npregs);
for (i = 0; i < LOGO_W * LOGO_H; i++)
npregs->go.hostrw0 = linux_logo[i] << 24;
@@ -133,7 +134,7 @@ static inline void newport_clear_screen(
if (logo_active)
return;
- newport_wait();
+ newport_wait(npregs);
npregs->set.wrmask = 0xffffffff;
npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
@@ -155,7 +156,7 @@ void newport_reset(void)
unsigned short treg;
int i;
- newport_wait();
+ newport_wait(npregs);
treg = newport_vc2_get(npregs, VC2_IREG_CONTROL);
newport_vc2_set(npregs, VC2_IREG_CONTROL,
(treg | VC2_CTRL_EVIDEO));
@@ -165,7 +166,7 @@ void newport_reset(void)
npregs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_RAM |
NPORT_DMODE_W2 | VC2_PROTOCOL);
for (i = 0; i < 128; i++) {
- newport_bfwait();
+ newport_bfwait(npregs);
if (i == 92 || i == 94)
npregs->set.dcbdata0.byshort.s1 = 0xff00;
else
@@ -205,7 +206,7 @@ void newport_get_screensize(void)
npregs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_RAM |
NPORT_DMODE_W2 | VC2_PROTOCOL);
for (i = 0; i < 128; i++) {
- newport_bfwait();
+ newport_bfwait(npregs);
linetable[i] = npregs->set.dcbdata0.byshort.s1;
}
@@ -216,12 +217,12 @@ void newport_get_screensize(void)
npregs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_RAM |
NPORT_DMODE_W2 | VC2_PROTOCOL);
do {
- newport_bfwait();
+ newport_bfwait(npregs);
treg = npregs->set.dcbdata0.byshort.s1;
if ((treg & 1) == 0)
cols += (treg >> 7) & 0xfe;
if ((treg & 0x80) == 0) {
- newport_bfwait();
+ newport_bfwait(npregs);
treg = npregs->set.dcbdata0.byshort.s1;
}
} while ((treg & 0x8000) == 0);
@@ -291,16 +292,16 @@ static const char *newport_startup(void)
if (!sgi_gfxaddr)
return NULL;
- npregs = (struct newport_regs *) (KSEG1 + sgi_gfxaddr);
+ npregs = (struct newport_regs *) /* ioremap cannot fail */
+ ioremap(sgi_gfxaddr, sizeof(struct newport_regs));
npregs->cset.config = NPORT_CFG_GD0;
- if (newport_wait()) {
- return NULL;
- }
+ if (newport_wait(npregs))
+ goto out_unmap;
npregs->set.xstarti = TESTVAL;
if (npregs->set._xstart.word != XSTI_TO_FXSTART(TESTVAL))
- return NULL;
+ goto out_unmap;
for (i = 0; i < MAX_NR_CONSOLES; i++)
font_data[i] = FONT_DATA;
@@ -310,6 +311,10 @@ static const char *newport_startup(void)
newport_get_screensize();
return "SGI Newport";
+
+out_unmap:
+ iounmap((void *)npregs);
+ return NULL;
}
static void newport_init(struct vc_data *vc, int init)
@@ -363,7 +368,7 @@ static void newport_putc(struct vc_data
(charattr & 0xf0) >> 4);
/* Set the color and drawing mode. */
- newport_wait();
+ newport_wait(npregs);
npregs->set.colori = charattr & 0xf;
npregs->set.drawmode0 = (NPORT_DMODE0_DRAW | NPORT_DMODE0_BLOCK |
NPORT_DMODE0_STOPX | NPORT_DMODE0_ZPENAB |
@@ -372,7 +377,7 @@ static void newport_putc(struct vc_data
/* Set coordinates for bitmap operation. */
npregs->set.xystarti = (xpos << 16) | ((ypos + topscan) & 0x3ff);
npregs->set.xyendi = ((xpos + 7) << 16);
- newport_wait();
+ newport_wait(npregs);
/* Go, baby, go... */
RENDER(npregs, p);
@@ -396,7 +401,7 @@ static void newport_putcs(struct vc_data
xpos + ((count - 1) << 3), ypos,
(charattr & 0xf0) >> 4);
- newport_wait();
+ newport_wait(npregs);
/* Set the color and drawing mode. */
npregs->set.colori = charattr & 0xf;
@@ -407,7 +412,7 @@ static void newport_putcs(struct vc_data
for (i = 0; i < count; i++, xpos += 8) {
p = &font_data[vc->vc_num][(scr_readw(s++) & 0xff) << 4];
- newport_wait();
+ newport_wait(npregs);
/* Set coordinates for bitmap operation. */
npregs->set.xystarti =
@@ -689,7 +694,7 @@ static void newport_bmove(struct vc_data
xe = xs;
xs = tmp;
}
- newport_wait();
+ newport_wait(npregs);
npregs->set.drawmode0 = (NPORT_DMODE0_S2S | NPORT_DMODE0_BLOCK |
NPORT_DMODE0_DOSETUP | NPORT_DMODE0_STOPX
| NPORT_DMODE0_STOPY);
@@ -706,35 +711,35 @@ static int newport_dummy(struct vc_data
#define DUMMY (void *) newport_dummy
const struct consw newport_con = {
- con_startup: newport_startup,
- con_init: newport_init,
- con_deinit: newport_deinit,
- con_clear: newport_clear,
- con_putc: newport_putc,
- con_putcs: newport_putcs,
- con_cursor: newport_cursor,
- con_scroll: newport_scroll,
- con_bmove: newport_bmove,
- con_switch: newport_switch,
- con_blank: newport_blank,
- con_font_op: newport_font_op,
- con_set_palette: newport_set_palette,
- con_scrolldelta: newport_scrolldelta,
- con_set_origin: DUMMY,
- con_save_screen: DUMMY
+ .con_startup = newport_startup,
+ .con_init = newport_init,
+ .con_deinit = newport_deinit,
+ .con_clear = newport_clear,
+ .con_putc = newport_putc,
+ .con_putcs = newport_putcs,
+ .con_cursor = newport_cursor,
+ .con_scroll = newport_scroll,
+ .con_bmove = newport_bmove,
+ .con_switch = newport_switch,
+ .con_blank = newport_blank,
+ .con_font_op = newport_font_op,
+ .con_set_palette = newport_set_palette,
+ .con_scrolldelta = newport_scrolldelta,
+ .con_set_origin = DUMMY,
+ .con_save_screen = DUMMY
};
#ifdef MODULE
static int __init newport_console_init(void)
{
take_over_console(&newport_con, 0, MAX_NR_CONSOLES - 1, 1);
-
return 0;
}
static void __exit newport_console_exit(void)
{
give_up_console(&newport_con);
+ iounmap((void *)npregs);
}
module_init(newport_console_init);
Index: linux-2.4.35.4/drivers/video/tgafb.c
===================================================================
--- linux-2.4.35.4.orig/drivers/video/tgafb.c
+++ linux-2.4.35.4/drivers/video/tgafb.c
@@ -45,6 +45,15 @@
#include <linux/console.h>
#include <asm/io.h>
+#ifdef CONFIG_TC
+#include <asm/dec/tc.h>
+#else
+static int search_tc_card(const char *) { return -1; }
+static void claim_tc_card(int) { }
+static void release_tc_card(int) { }
+static unsigned long get_tc_base_addr(int) { return 0; }
+#endif
+
#include <video/fbcon.h>
#include <video/fbcon-cfb8.h>
#include <video/fbcon-cfb32.h>
@@ -84,10 +93,10 @@ static unsigned int fb_offset_presets[4]
};
static unsigned int deep_presets[4] = {
- 0x00014000,
- 0x0001440d,
+ 0x00004000,
+ 0x0000440d,
0xffffffff,
- 0x0001441d
+ 0x0000441d
};
static unsigned int rasterop_presets[4] = {
@@ -131,6 +140,13 @@ static struct {
0,
FB_VMODE_NONINTERLACED
}},
+ { "1280x1024-72", { /* mode #0 of PMAGD boards */
+ 1280, 1024, 1280, 1024, 0, 0, 0, 0,
+ {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
+ 0, 0, -1, -1, FB_ACCELF_TEXT, 7692, 232, 32, 34, 3, 160, 3,
+ FB_SYNC_ON_GREEN,
+ FB_VMODE_NONINTERLACED
+ }},
{ "800x600-56", {
800, 600, 800, 600, 0, 0, 0, 0,
{0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
@@ -488,7 +504,8 @@ static void tgafb_set_par(const void *fb
continue;
mb();
- TGA_WRITE_REG(deep_presets[fb_info.tga_type], TGA_DEEP_REG);
+ TGA_WRITE_REG(deep_presets[fb_info.tga_type] |
+ (par->sync_on_green ? 0x0 : 0x00010000), TGA_DEEP_REG);
while (TGA_READ_REG(TGA_CMD_STAT_REG) & 1) /* wait for not busy */
continue;
mb();
@@ -548,7 +565,7 @@ static void tgafb_set_par(const void *fb
BT463_WRITE(BT463_REG_ACC, BT463_CMD_REG_0, 0x40);
BT463_WRITE(BT463_REG_ACC, BT463_CMD_REG_1, 0x08);
BT463_WRITE(BT463_REG_ACC, BT463_CMD_REG_2,
- (par->sync_on_green ? 0x80 : 0x40));
+ (par->sync_on_green ? 0xc0 : 0x40));
BT463_WRITE(BT463_REG_ACC, BT463_READ_MASK_0, 0xff);
BT463_WRITE(BT463_REG_ACC, BT463_READ_MASK_1, 0xff);
@@ -921,19 +938,34 @@ int __init tgafb_setup(char *options) {
int __init tgafb_init(void)
{
struct pci_dev *pdev;
+ int slot;
pdev = pci_find_device(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TGA, NULL);
if (!pdev)
+ slot = search_tc_card("PMAGD");
+ if (!pdev && slot < 0)
return -ENXIO;
/* divine board type */
- fb_info.tga_mem_base = (unsigned long)ioremap(pdev->resource[0].start, 0);
- fb_info.tga_type = (readl(fb_info.tga_mem_base) >> 12) & 0x0f;
- fb_info.tga_regs_base = fb_info.tga_mem_base + TGA_REGS_OFFSET;
- fb_info.tga_fb_base = (fb_info.tga_mem_base
+ if (pdev) {
+ fb_info.tga_mem_base = (unsigned long)ioremap(pdev->resource[0].start,
+ 0);
+ fb_info.tga_type = (readl(fb_info.tga_mem_base) >> 12) & 0x0f;
+ fb_info.tga_regs_base = fb_info.tga_mem_base + TGA_REGS_OFFSET;
+ fb_info.tga_fb_base = (fb_info.tga_mem_base
+ fb_offset_presets[fb_info.tga_type]);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &fb_info.tga_chip_rev);
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &fb_info.tga_chip_rev);
+
+ } else {
+ claim_tc_card(slot);
+ fb_info.tga_mem_base = get_tc_base_addr(slot);
+ fb_info.tga_type = (readl(fb_info.tga_mem_base) >> 12) & 0x0f; /* ? */
+ fb_info.tga_regs_base = fb_info.tga_mem_base + TGA_REGS_OFFSET;
+ fb_info.tga_fb_base = (fb_info.tga_mem_base
+ + fb_offset_presets[fb_info.tga_type]);
+ fb_info.tga_chip_rev = TGA_READ_REG(TGA_START_REG) & 0xff;
+ }
/* setup framebuffer */
@@ -950,40 +982,62 @@ int __init tgafb_init(void)
fb_info.gen.fbhw = &tgafb_hwswitch;
fb_info.gen.fbhw->detect();
- printk (KERN_INFO "tgafb: DC21030 [TGA] detected, rev=0x%02x\n", fb_info.tga_chip_rev);
- printk (KERN_INFO "tgafb: at PCI bus %d, device %d, function %d\n",
- pdev->bus->number, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ if (pdev) {
+ printk (KERN_INFO "tgafb: DC21030 [TGA] detected, rev=0x%02x\n",
+ fb_info.tga_chip_rev);
+ printk (KERN_INFO "tgafb: at PCI bus %d, device %d, function %d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ } else {
+ printk (KERN_INFO "tgafb: SFB+ detected, rev=0x%02x\n",
+ fb_info.tga_chip_rev);
+ }
switch (fb_info.tga_type)
{
case TGA_TYPE_8PLANE:
- strcpy (fb_info.gen.info.modename,"Digital ZLXp-E1");
+ if (pdev)
+ strcpy (fb_info.gen.info.modename,"Digital ZLXp-E1");
+ else
+ strcpy (fb_info.gen.info.modename,"Digital ZLX-E1");
break;
case TGA_TYPE_24PLANE:
- strcpy (fb_info.gen.info.modename,"Digital ZLXp-E2");
+ if (pdev)
+ strcpy (fb_info.gen.info.modename,"Digital ZLXp-E2");
+ else
+ strcpy (fb_info.gen.info.modename,"Digital ZLX-E2");
break;
case TGA_TYPE_24PLUSZ:
- strcpy (fb_info.gen.info.modename,"Digital ZLXp-E3");
+ if (pdev)
+ strcpy (fb_info.gen.info.modename,"Digital ZLXp-E3");
+ else
+ strcpy (fb_info.gen.info.modename,"Digital ZLX-E3");
break;
}
/* This should give a reasonable default video mode */
if (!default_var_valid) {
- default_var = tgafb_predefined[0].var;
+ if (pdev)
+ default_var = tgafb_predefined[0].var;
+ else
+ default_var = tgafb_predefined[1].var;
}
fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
disp.var.activate = FB_ACTIVATE_NOW;
fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
fbgen_set_disp(-1, &fb_info.gen);
fbgen_install_cmap(0, &fb_info.gen);
- if (register_framebuffer(&fb_info.gen.info) < 0)
+ if (register_framebuffer(&fb_info.gen.info) < 0) {
+ if (slot >= 0)
+ release_tc_card(slot);
return -EINVAL;
- printk(KERN_INFO "fb%d: %s frame buffer device at 0x%lx\n",
+ }
+ printk(KERN_INFO "fb%d: %s frame buffer device at 0x%llx\n",
GET_FB_IDX(fb_info.gen.info.node), fb_info.gen.info.modename,
- pdev->resource[0].start);
+ fb_info.tga_mem_base);
return 0;
}
Index: linux-2.4.35.4/drivers/video/tgafb.h
===================================================================
--- linux-2.4.35.4.orig/drivers/video/tgafb.h
+++ linux-2.4.35.4/drivers/video/tgafb.h
@@ -36,6 +36,7 @@
#define TGA_RASTEROP_REG 0x0034
#define TGA_PIXELSHIFT_REG 0x0038
#define TGA_DEEP_REG 0x0050
+#define TGA_START_REG 0x0054
#define TGA_PIXELMASK_REG 0x005c
#define TGA_CURSOR_BASE_REG 0x0060
#define TGA_HORIZ_REG 0x0064
Index: linux-2.4.35.4/fs/binfmt_elf.c
===================================================================
--- linux-2.4.35.4.orig/fs/binfmt_elf.c
+++ linux-2.4.35.4/fs/binfmt_elf.c
@@ -665,6 +665,9 @@ static int load_elf_binary(struct linux_
bprm->argc++;
}
}
+ } else {
+ /* Executables without an interpreter also need a personality */
+ SET_PERSONALITY(elf_ex, ibcs2_interpreter);
}
/* Flush all traces of the currently running executable */
@@ -1225,7 +1228,11 @@ static int elf_core_dump(long signr, str
elf.e_entry = 0;
elf.e_phoff = sizeof(elf);
elf.e_shoff = 0;
+#ifdef ELF_CORE_EFLAGS
+ elf.e_flags = ELF_CORE_EFLAGS;
+#else
elf.e_flags = 0;
+#endif
elf.e_ehsize = sizeof(elf);
elf.e_phentsize = sizeof(struct elf_phdr);
elf.e_phnum = segs+1; /* Include notes */
Index: linux-2.4.35.4/fs/partitions/sgi.c
===================================================================
--- linux-2.4.35.4.orig/fs/partitions/sgi.c
+++ linux-2.4.35.4/fs/partitions/sgi.c
@@ -17,6 +17,11 @@
#include "check.h"
#include "sgi.h"
+#if CONFIG_BLK_DEV_MD
+extern void md_autodetect_dev(kdev_t dev);
+#endif
+
+
int sgi_partition(struct gendisk *hd, struct block_device *bdev, unsigned long first_sector, int current_minor)
{
int i, csum, magic;
@@ -77,6 +82,10 @@ int sgi_partition(struct gendisk *hd, st
if(!blocks)
continue;
add_gd_partition(hd, current_minor, start, blocks);
+#ifdef CONFIG_BLK_DEV_MD
+ if (be32_to_cpu(p->type) == LINUX_RAID_PARTITION)
+ md_autodetect_dev(MKDEV(hd->major, current_minor));
+#endif
current_minor++;
}
printk("\n");
Index: linux-2.4.35.4/fs/proc/array.c
===================================================================
--- linux-2.4.35.4.orig/fs/proc/array.c
+++ linux-2.4.35.4/fs/proc/array.c
@@ -368,15 +368,15 @@ int proc_pid_stat(struct task_struct *ta
task->cmin_flt,
task->maj_flt,
task->cmaj_flt,
- task->times.tms_utime,
- task->times.tms_stime,
- task->times.tms_cutime,
- task->times.tms_cstime,
+ hz_to_std(task->times.tms_utime),
+ hz_to_std(task->times.tms_stime),
+ hz_to_std(task->times.tms_cutime),
+ hz_to_std(task->times.tms_cstime),
priority,
nice,
0UL /* removed */,
task->it_real_value,
- task->start_time,
+ hz_to_std(task->start_time),
vsize,
mm ? mm->rss : 0, /* you might want to shift this left 3 */
task->rlim[RLIMIT_RSS].rlim_cur,
@@ -615,14 +615,14 @@ int proc_pid_cpu(struct task_struct *tas
len = sprintf(buffer,
"cpu %lu %lu\n",
- task->times.tms_utime,
- task->times.tms_stime);
+ hz_to_std(task->times.tms_utime),
+ hz_to_std(task->times.tms_stime));
for (i = 0 ; i < smp_num_cpus; i++)
len += sprintf(buffer + len, "cpu%d %lu %lu\n",
i,
- task->per_cpu_utime[cpu_logical_map(i)],
- task->per_cpu_stime[cpu_logical_map(i)]);
+ hz_to_std(task->per_cpu_utime[cpu_logical_map(i)]),
+ hz_to_std(task->per_cpu_stime[cpu_logical_map(i)]));
return len;
}
Index: linux-2.4.35.4/fs/proc/proc_misc.c
===================================================================
--- linux-2.4.35.4.orig/fs/proc/proc_misc.c
+++ linux-2.4.35.4/fs/proc/proc_misc.c
@@ -308,16 +308,16 @@ static int kstat_read_proc(char *page, c
{
int i, len = 0;
extern unsigned long total_forks;
- unsigned long jif = jiffies;
+ unsigned long jif = hz_to_std(jiffies);
unsigned int sum = 0, user = 0, nice = 0, system = 0;
int major, disk;
for (i = 0 ; i < smp_num_cpus; i++) {
int cpu = cpu_logical_map(i), j;
- user += kstat.per_cpu_user[cpu];
- nice += kstat.per_cpu_nice[cpu];
- system += kstat.per_cpu_system[cpu];
+ user += hz_to_std(kstat.per_cpu_user[cpu]);
+ nice += hz_to_std(kstat.per_cpu_nice[cpu]);
+ system += hz_to_std(kstat.per_cpu_system[cpu]);
#if !defined(CONFIG_ARCH_S390)
for (j = 0 ; j < NR_IRQS ; j++)
sum += kstat.irqs[cpu][j];
@@ -331,10 +331,10 @@ static int kstat_read_proc(char *page, c
proc_sprintf(page, &off, &len,
"cpu%d %u %u %u %lu\n",
i,
- kstat.per_cpu_user[cpu_logical_map(i)],
- kstat.per_cpu_nice[cpu_logical_map(i)],
- kstat.per_cpu_system[cpu_logical_map(i)],
- jif - ( kstat.per_cpu_user[cpu_logical_map(i)] \
+ hz_to_std(kstat.per_cpu_user[cpu_logical_map(i)]),
+ hz_to_std(kstat.per_cpu_nice[cpu_logical_map(i)]),
+ hz_to_std(kstat.per_cpu_system[cpu_logical_map(i)]),
+ jif - hz_to_std( kstat.per_cpu_user[cpu_logical_map(i)] \
+ kstat.per_cpu_nice[cpu_logical_map(i)] \
+ kstat.per_cpu_system[cpu_logical_map(i)]));
proc_sprintf(page, &off, &len,
Index: linux-2.4.35.4/include/asm-alpha/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-alpha/param.h
+++ linux-2.4.35.4/include/asm-alpha/param.h
@@ -13,6 +13,9 @@
# else
# define HZ 1200
# endif
+#ifdef __KERNEL__
+# define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 8192
Index: linux-2.4.35.4/include/asm-i386/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-i386/param.h
+++ linux-2.4.35.4/include/asm-i386/param.h
@@ -3,6 +3,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 4096
Index: linux-2.4.35.4/include/asm-ia64/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-ia64/param.h
+++ linux-2.4.35.4/include/asm-ia64/param.h
@@ -7,9 +7,15 @@
* Based on <asm-i386/param.h>.
*
* Modified 1998, 1999, 2002-2003
- * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
*/
+#include <linux/config.h>
+
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
+
#define EXEC_PAGESIZE 65536
#ifndef NGROUPS
Index: linux-2.4.35.4/include/asm-m68k/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-m68k/param.h
+++ linux-2.4.35.4/include/asm-m68k/param.h
@@ -3,6 +3,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 8192
Index: linux-2.4.35.4/include/asm-mips/au1000_gpio.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/au1000_gpio.h
+++ linux-2.4.35.4/include/asm-mips/au1000_gpio.h
@@ -30,6 +30,13 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/*
+ * Revision history
+ * 01/31/02 0.01 Initial release. Steve Longerbeam, MontaVista
+ * 10/12/03 0.1 Added Au1100/Au1500, GPIO2, and bit operations. K.C. Nishio, AMD
+ * 08/05/04 0.11 Added Au1550 and Au1200. K.C. Nishio
+ */
+
#ifndef __AU1000_GPIO_H
#define __AU1000_GPIO_H
@@ -44,13 +51,94 @@
#define AU1000GPIO_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 4, int)
#define AU1000GPIO_AVAIL_MASK _IOR (AU1000GPIO_IOC_MAGIC, 5, int)
+// bit operations
+#define AU1000GPIO_BIT_READ _IOW (AU1000GPIO_IOC_MAGIC, 6, int)
+#define AU1000GPIO_BIT_SET _IOW (AU1000GPIO_IOC_MAGIC, 7, int)
+#define AU1000GPIO_BIT_CLEAR _IOW (AU1000GPIO_IOC_MAGIC, 8, int)
+#define AU1000GPIO_BIT_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 9, int)
+#define AU1000GPIO_BIT_INIT _IOW (AU1000GPIO_IOC_MAGIC, 10, int)
+#define AU1000GPIO_BIT_TERM _IOW (AU1000GPIO_IOC_MAGIC, 11, int)
+
+/* set this major numer same as the CRIS GPIO driver */
+#define AU1X00_GPIO_MAJOR (120)
+
+#define ENABLED_ZERO (0)
+#define ENABLED_ONE (1)
+#define ENABLED_10 (0x2)
+#define ENABLED_11 (0x3)
+#define ENABLED_111 (0x7)
+#define NOT_AVAIL (-1)
+#define AU1X00_MAX_PRIMARY_GPIO (32)
+
+#define AU1000_GPIO_MINOR_MAX AU1X00_MAX_PRIMARY_GPIO
+/* Au1100, 1500, 1550 and 1200 have the secondary GPIO block */
+#define AU1XX0_GPIO_MINOR_MAX (48)
+
+#define AU1X00_GPIO_NAME "gpio"
+
+/* GPIO pins which are not multiplexed */
+#if defined(CONFIG_SOC_AU1000)
+ #define NATIVE_GPIOPIN ((1 << 15) | (1 << 8) | (1 << 7) | (1 << 1) | (1 << 0))
+ #define NATIVE_GPIO2PIN (0)
+#elif defined(CONFIG_SOC_AU1100)
+ #define NATIVE_GPIOPIN ((1 << 23) | (1 << 22) | (1 << 21) | (1 << 20) | (1 << 19) | (1 << 18) | \
+ (1 << 17) | (1 << 16) | (1 << 7) | (1 << 1) | (1 << 0))
+ #define NATIVE_GPIO2PIN (0)
+#elif defined(CONFIG_SOC_AU1500)
+ #define NATIVE_GPIOPIN ((1 << 15) | (1 << 8) | (1 << 7) | (1 << 1) | (1 << 0))
+ /* exclude the PCI reset output signal: GPIO[200], DMA_REQ2 and DMA_REQ3 */
+ #define NATIVE_GPIO2PIN (0xfffe & ~((1 << 9) | (1 << 8)))
+#elif defined(CONFIG_SOC_AU1550)
+ #define NATIVE_GPIOPIN ((1 << 15) | (1 << 8) | (1 << 7) | (1 << 6) | (1 << 1) | (1 << 0))
+ /* please refere Au1550 Data Book, chapter 15 */
+ #define NATIVE_GPIO2PIN (1 << 5)
+#elif defined(CONFIG_SOC_AU1200)
+ #define NATIVE_GPIOPIN ((1 << 7) | (1 << 5))
+ #define NATIVE_GPIO2PIN (0)
+#endif
+
+/* minor as u32 */
+#define MINOR_TO_GPIOPIN(minor) ((minor < AU1X00_MAX_PRIMARY_GPIO) ? minor : (minor - AU1X00_MAX_PRIMARY_GPIO))
+#define IS_PRIMARY_GPIOPIN(minor) ((minor < AU1X00_MAX_PRIMARY_GPIO) ? 1 : 0)
+
+/*
+ * pin to minor mapping.
+ * GPIO0-GPIO31, minor=0-31.
+ * GPIO200-GPIO215, minor=32-47.
+ */
+typedef struct _au1x00_gpio_bit_ctl {
+ int direction; // The direction of this GPIO pin. 0: IN, 1: OUT.
+ int data; // Pin output when itized (0/1), or at the term. 0/1/-1 (tristate).
+} au1x00_gpio_bit_ctl;
+
+typedef struct _au1x00_gpio_driver {
+ const char *driver_name;
+ const char *name;
+ int name_base; /* offset of printed name */
+ short major; /* major device number */
+ short minor_start; /* start of minor device number*/
+ short num; /* number of devices */
+} au1x00_gpio_driver;
+
#ifdef __KERNEL__
-extern u32 get_au1000_avail_gpio_mask(void);
-extern int au1000gpio_tristate(u32 data);
-extern int au1000gpio_in(u32 *data);
-extern int au1000gpio_set(u32 data);
-extern int au1000gpio_clear(u32 data);
-extern int au1000gpio_out(u32 data);
+extern u32 get_au1000_avail_gpio_mask(u32 *avail_gpio2);
+extern int au1000gpio_tristate(u32 minor, u32 data);
+extern int au1000gpio_in(u32 minor, u32 *data);
+extern int au1000gpio_set(u32 minor, u32 data);
+extern int au1000gpio_clear(u32 minor, u32 data);
+extern int au1000gpio_out(u32 minor, u32 data);
+extern int au1000gpio_bit_read(u32 minor, u32 *read_data);
+extern int au1000gpio_bit_set(u32 minor);
+extern int au1000gpio_bit_clear(u32 minor);
+extern int au1000gpio_bit_tristate(u32 minor);
+extern int check_minor_to_gpio(u32 minor);
+extern int au1000gpio_bit_init(u32 minor, au1x00_gpio_bit_ctl *bit_opt);
+extern int au1000gpio_bit_term(u32 minor, au1x00_gpio_bit_ctl *bit_opt);
+
+extern void gpio_register_devfs (au1x00_gpio_driver *driver, unsigned int flags, unsigned minor);
+extern void gpio_unregister_devfs (au1x00_gpio_driver *driver, unsigned minor);
+extern int gpio_register_driver(au1x00_gpio_driver *driver);
+extern int gpio_unregister_driver(au1x00_gpio_driver *driver);
#endif
#endif
Index: linux-2.4.35.4/include/asm-mips/au1000.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/au1000.h
+++ linux-2.4.35.4/include/asm-mips/au1000.h
@@ -160,28 +160,356 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
#endif
-/* SDRAM Controller */
+/*
+ * SDRAM Register Offsets
+ */
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 0xB4000000
-#define MEM_SDMODE1 0xB4000004
-#define MEM_SDMODE2 0xB4000008
-
-#define MEM_SDADDR0 0xB400000C
-#define MEM_SDADDR1 0xB4000010
-#define MEM_SDADDR2 0xB4000014
-
-#define MEM_SDREFCFG 0xB4000018
-#define MEM_SDPRECMD 0xB400001C
-#define MEM_SDAUTOREF 0xB4000020
-
-#define MEM_SDWRMD0 0xB4000024
-#define MEM_SDWRMD1 0xB4000028
-#define MEM_SDWRMD2 0xB400002C
+#define MEM_SDMODE0 (0x0000)
+#define MEM_SDMODE1 (0x0004)
+#define MEM_SDMODE2 (0x0008)
+#define MEM_SDADDR0 (0x000C)
+#define MEM_SDADDR1 (0x0010)
+#define MEM_SDADDR2 (0x0014)
+#define MEM_SDREFCFG (0x0018)
+#define MEM_SDPRECMD (0x001C)
+#define MEM_SDAUTOREF (0x0020)
+#define MEM_SDWRMD0 (0x0024)
+#define MEM_SDWRMD1 (0x0028)
+#define MEM_SDWRMD2 (0x002C)
+#define MEM_SDSLEEP (0x0030)
+#define MEM_SDSMCKE (0x0034)
+
+#ifndef ASSEMBLER
+/*typedef volatile struct
+{
+ uint32 sdmode0;
+ uint32 sdmode1;
+ uint32 sdmode2;
+ uint32 sdaddr0;
+ uint32 sdaddr1;
+ uint32 sdaddr2;
+ uint32 sdrefcfg;
+ uint32 sdautoref;
+ uint32 sdwrmd0;
+ uint32 sdwrmd1;
+ uint32 sdwrmd2;
+ uint32 sdsleep;
+ uint32 sdsmcke;
+
+} AU1X00_SDRAM;*/
+#endif
+
+/*
+ * MEM_SDMODE register content definitions
+ */
+#define MEM_SDMODE_F (1<<22)
+#define MEM_SDMODE_SR (1<<21)
+#define MEM_SDMODE_BS (1<<20)
+#define MEM_SDMODE_RS (3<<18)
+#define MEM_SDMODE_CS (7<<15)
+#define MEM_SDMODE_TRAS (15<<11)
+#define MEM_SDMODE_TMRD (3<<9)
+#define MEM_SDMODE_TWR (3<<7)
+#define MEM_SDMODE_TRP (3<<5)
+#define MEM_SDMODE_TRCD (3<<3)
+#define MEM_SDMODE_TCL (7<<0)
+
+#define MEM_SDMODE_BS_2Bank (0<<20)
+#define MEM_SDMODE_BS_4Bank (1<<20)
+#define MEM_SDMODE_RS_11Row (0<<18)
+#define MEM_SDMODE_RS_12Row (1<<18)
+#define MEM_SDMODE_RS_13Row (2<<18)
+#define MEM_SDMODE_RS_N(N) ((N)<<18)
+#define MEM_SDMODE_CS_7Col (0<<15)
+#define MEM_SDMODE_CS_8Col (1<<15)
+#define MEM_SDMODE_CS_9Col (2<<15)
+#define MEM_SDMODE_CS_10Col (3<<15)
+#define MEM_SDMODE_CS_11Col (4<<15)
+#define MEM_SDMODE_CS_N(N) ((N)<<15)
+#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
+#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
+#define MEM_SDMODE_TWR_N(N) ((N)<<7)
+#define MEM_SDMODE_TRP_N(N) ((N)<<5)
+#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
+#define MEM_SDMODE_TCL_N(N) ((N)<<0)
+
+/*
+ * MEM_SDADDR register contents definitions
+ */
+#define MEM_SDADDR_E (1<<20)
+#define MEM_SDADDR_CSBA (0x03FF<<10)
+#define MEM_SDADDR_CSMASK (0x03FF<<0)
+#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
+
+/*
+ * MEM_SDREFCFG register content definitions
+ */
+#define MEM_SDREFCFG_TRC (15<<28)
+#define MEM_SDREFCFG_TRPM (3<<26)
+#define MEM_SDREFCFG_E (1<<25)
+#define MEM_SDREFCFG_RE (0x1ffffff<<0)
+#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_REF_N(N) (N)
+#endif
+
+/***********************************************************************/
+
+/*
+ * Au1550 SDRAM Register Offsets
+ */
+
+/***********************************************************************/
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#define MEM_SDMODE0 (0x0800)
+#define MEM_SDMODE1 (0x0808)
+#define MEM_SDMODE2 (0x0810)
+#define MEM_SDADDR0 (0x0820)
+#define MEM_SDADDR1 (0x0828)
+#define MEM_SDADDR2 (0x0830)
+#define MEM_SDCONFIGA (0x0840)
+#define MEM_SDCONFIGB (0x0848)
+#define MEM_SDSTAT (0x0850)
+#define MEM_SDERRADDR (0x0858)
+#define MEM_SDSTRIDE0 (0x0860)
+#define MEM_SDSTRIDE1 (0x0868)
+#define MEM_SDSTRIDE2 (0x0870)
+#define MEM_SDWRMD0 (0x0880)
+#define MEM_SDWRMD1 (0x0888)
+#define MEM_SDWRMD2 (0x0890)
+#define MEM_SDPRECMD (0x08C0)
+#define MEM_SDAUTOREF (0x08C8)
+#define MEM_SDSREF (0x08D0)
+#define MEM_SDSLEEP MEM_SDSREF
+
+#ifndef ASSEMBLER
+/*typedef volatile struct
+{
+ uint32 sdmode0;
+ uint32 reserved0;
+ uint32 sdmode1;
+ uint32 reserved1;
+ uint32 sdmode2;
+ uint32 reserved2[3];
+ uint32 sdaddr0;
+ uint32 reserved3;
+ uint32 sdaddr1;
+ uint32 reserved4;
+ uint32 sdaddr2;
+ uint32 reserved5[3];
+ uint32 sdconfiga;
+ uint32 reserved6;
+ uint32 sdconfigb;
+ uint32 reserved7;
+ uint32 sdstat;
+ uint32 reserved8;
+ uint32 sderraddr;
+ uint32 reserved9;
+ uint32 sdstride0;
+ uint32 reserved10;
+ uint32 sdstride1;
+ uint32 reserved11;
+ uint32 sdstride2;
+ uint32 reserved12[3];
+ uint32 sdwrmd0;
+ uint32 reserved13;
+ uint32 sdwrmd1;
+ uint32 reserved14;
+ uint32 sdwrmd2;
+ uint32 reserved15[11];
+ uint32 sdprecmd;
+ uint32 reserved16;
+ uint32 sdautoref;
+ uint32 reserved17;
+ uint32 sdsref;
+
+} AU1550_SDRAM;*/
+#endif
+#endif
+
+/*
+ * Physical base addresses for integrated peripherals
+ */
+
+#ifdef CONFIG_SOC_AU1000
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART2_PHYS_ADDR 0x11300000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#endif
+
+/********************************************************************/
-#define MEM_SDSLEEP 0xB4000030
-#define MEM_SDSMCKE 0xB4000034
+#ifdef CONFIG_SOC_AU1500
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x11500000
+#define MAC1_PHYS_ADDR 0x11510000
+#define MACEN_PHYS_ADDR 0x11520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define PCI_MEM_PHYS_ADDR 0x400000000
+#define PCI_IO_PHYS_ADDR 0x500000000
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#endif
+/********************************************************************/
+
+#ifdef CONFIG_SOC_AU1100
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define DMA0_PHYS_ADDR 0x14002000
+#define DMA1_PHYS_ADDR 0x14002100
+#define DMA2_PHYS_ADDR 0x14002200
+#define DMA3_PHYS_ADDR 0x14002300
+#define DMA4_PHYS_ADDR 0x14002400
+#define DMA5_PHYS_ADDR 0x14002500
+#define DMA6_PHYS_ADDR 0x14002600
+#define DMA7_PHYS_ADDR 0x14002700
+#define IC0_PHYS_ADDR 0x10400000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define IC1_PHYS_ADDR 0x11800000
+#define AC97_PHYS_ADDR 0x10000000
+#define USBH_PHYS_ADDR 0x10100000
+#define USBD_PHYS_ADDR 0x10200000
+#define IRDA_PHYS_ADDR 0x10300000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define I2S_PHYS_ADDR 0x11000000
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define SSI0_PHYS_ADDR 0x11600000
+#define SSI1_PHYS_ADDR 0x11680000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define LCD_PHYS_ADDR 0x15000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1550
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBH_PHYS_ADDR 0x14020000
+#define USBD_PHYS_ADDR 0x10200000
+#define PCI_PHYS_ADDR 0x14005000
+#define MAC0_PHYS_ADDR 0x10500000
+#define MAC1_PHYS_ADDR 0x10510000
+#define MACEN_PHYS_ADDR 0x10520000
+#define MACDMA0_PHYS_ADDR 0x14004000
+#define MACDMA1_PHYS_ADDR 0x14004200
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define UART3_PHYS_ADDR 0x11400000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PE_PHYS_ADDR 0x14008000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000
+#define PCI_IO_PHYS_ADDR 0x500000000
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#endif
+
+/***********************************************************************/
+
+#ifdef CONFIG_SOC_AU1200
+#define MEM_PHYS_ADDR 0x14000000
+#define STATIC_MEM_PHYS_ADDR 0x14001000
+#define AES_PHYS_ADDR 0x10300000
+#define CIM_PHYS_ADDR 0x14004000
+#define IC0_PHYS_ADDR 0x10400000
+#define IC1_PHYS_ADDR 0x11800000
+#define USBM_PHYS_ADDR 0x14020000
+#define USBH_PHYS_ADDR 0x14020100
+#define UART0_PHYS_ADDR 0x11100000
+#define UART1_PHYS_ADDR 0x11200000
+#define GPIO2_PHYS_ADDR 0x11700000
+#define SYS_PHYS_ADDR 0x11900000
+#define DDMA_PHYS_ADDR 0x14002000
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define SD0_PHYS_ADDR 0x10600000
+#define SD1_PHYS_ADDR 0x10680000
+#define LCD_PHYS_ADDR 0x15000000
+#define SWCNT_PHYS_ADDR 0x1110010C
+#define MAEFE_PHYS_ADDR 0x14012000
+#define MAEBE_PHYS_ADDR 0x14010000
+#endif
+
+
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
#define MEM_STTIME0 0xB4001004
@@ -367,7 +695,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1000_MAC0_ENABLE 0xB0520000
#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1000
+#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
#ifdef CONFIG_SOC_AU1500
@@ -438,7 +766,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1500_MAC0_ENABLE 0xB1520000
#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1500
+#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
#ifdef CONFIG_SOC_AU1100
@@ -483,6 +811,22 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1000_GPIO_13 45
#define AU1000_GPIO_14 46
#define AU1000_GPIO_15 47
+#define AU1000_GPIO_16 48
+#define AU1000_GPIO_17 49
+#define AU1000_GPIO_18 50
+#define AU1000_GPIO_19 51
+#define AU1000_GPIO_20 52
+#define AU1000_GPIO_21 53
+#define AU1000_GPIO_22 54
+#define AU1000_GPIO_23 55
+#define AU1000_GPIO_24 56
+#define AU1000_GPIO_25 57
+#define AU1000_GPIO_26 58
+#define AU1000_GPIO_27 59
+#define AU1000_GPIO_28 60
+#define AU1000_GPIO_29 61
+#define AU1000_GPIO_30 62
+#define AU1000_GPIO_31 63
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
@@ -494,7 +838,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
-#endif // CONFIG_SOC_AU1100
+#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
#define AU1550_UART0_INT 0
@@ -511,14 +855,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1550_PSC1_INT 11
#define AU1550_PSC2_INT 12
#define AU1550_PSC3_INT 13
-#define AU1550_TOY_INT 14
-#define AU1550_TOY_MATCH0_INT 15
-#define AU1550_TOY_MATCH1_INT 16
-#define AU1550_TOY_MATCH2_INT 17
-#define AU1550_RTC_INT 18
-#define AU1550_RTC_MATCH0_INT 19
-#define AU1550_RTC_MATCH1_INT 20
-#define AU1550_RTC_MATCH2_INT 21
+#define AU1000_TOY_INT 14
+#define AU1000_TOY_MATCH0_INT 15
+#define AU1000_TOY_MATCH1_INT 16
+#define AU1000_TOY_MATCH2_INT 17
+#define AU1000_RTC_INT 18
+#define AU1000_RTC_MATCH0_INT 19
+#define AU1000_RTC_MATCH1_INT 20
+#define AU1000_RTC_MATCH2_INT 21
#define AU1550_NAND_INT 23
#define AU1550_USB_DEV_REQ_INT 24
#define AU1550_USB_DEV_SUS_INT 25
@@ -573,7 +917,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1550_MAC0_ENABLE 0xB0520000
#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1550
+#endif /* CONFIG_SOC_AU1550 */
#ifdef CONFIG_SOC_AU1200
#define AU1200_UART0_INT 0
@@ -590,14 +934,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1200_PSC1_INT 11
#define AU1200_AES_INT 12
#define AU1200_CAMERA_INT 13
-#define AU1200_TOY_INT 14
-#define AU1200_TOY_MATCH0_INT 15
-#define AU1200_TOY_MATCH1_INT 16
-#define AU1200_TOY_MATCH2_INT 17
-#define AU1200_RTC_INT 18
-#define AU1200_RTC_MATCH0_INT 19
-#define AU1200_RTC_MATCH1_INT 20
-#define AU1200_RTC_MATCH2_INT 21
+#define AU1000_TOY_INT 14
+#define AU1000_TOY_MATCH0_INT 15
+#define AU1000_TOY_MATCH1_INT 16
+#define AU1000_TOY_MATCH2_INT 17
+#define AU1000_RTC_INT 18
+#define AU1000_RTC_MATCH0_INT 19
+#define AU1000_RTC_MATCH1_INT 20
+#define AU1000_RTC_MATCH2_INT 21
#define AU1200_NAND_INT 23
#define AU1200_GPIO_204 24
#define AU1200_GPIO_205 25
@@ -605,6 +949,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define AU1200_GPIO_207 27
#define AU1200_GPIO_208_215 28 // Logical OR of 208:215
#define AU1200_USB_INT 29
+#define AU1000_USB_HOST_INT AU1200_USB_INT
#define AU1200_LCD_INT 30
#define AU1200_MAE_BOTH_INT 31
#define AU1000_GPIO_0 32
@@ -643,21 +988,36 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define UART0_ADDR 0xB1100000
#define UART1_ADDR 0xB1200000
-#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB4027ffc
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
-// these are here for prototyping on au1550 (do not exist on au1200)
-#define AU1200_ETH0_BASE 0xB0500000
-#define AU1200_ETH1_BASE 0xB0510000
-#define AU1200_MAC0_ENABLE 0xB0520000
-#define AU1200_MAC1_ENABLE 0xB0520004
-#define NUM_ETH_INTERFACES 2
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
#define AU1000_LAST_INTC0_INT 31
+#define AU1000_LAST_INTC1_INT 63
#define AU1000_MAX_INTR 63
-
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
@@ -728,6 +1088,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define I2S_CONTROL_D (1<<1)
#define I2S_CONTROL_CE (1<<0)
+#ifndef CONFIG_SOC_AU1200
+
/* USB Host Controller */
#define USB_OHCI_LEN 0x00100000
@@ -773,6 +1135,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define USBDEV_ENABLE (1<<1)
#define USBDEV_CE (1<<0)
+#endif /* !CONFIG_SOC_AU1200 */
+
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
@@ -1171,6 +1535,37 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define SYS_PF_PSC1_S1 (1 << 1)
#define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+/* Au1200 Only */
+#ifdef CONFIG_SOC_AU1200
+#define SYS_PINFUNC_DMA (1<<31)
+#define SYS_PINFUNC_S0A (1<<30)
+#define SYS_PINFUNC_S1A (1<<29)
+#define SYS_PINFUNC_LP0 (1<<28)
+#define SYS_PINFUNC_LP1 (1<<27)
+#define SYS_PINFUNC_LD16 (1<<26)
+#define SYS_PINFUNC_LD8 (1<<25)
+#define SYS_PINFUNC_LD1 (1<<24)
+#define SYS_PINFUNC_LD0 (1<<23)
+#define SYS_PINFUNC_P1A (3<<21)
+#define SYS_PINFUNC_P1B (1<<20)
+#define SYS_PINFUNC_FS3 (1<<19)
+#define SYS_PINFUNC_P0A (3<<17)
+#define SYS_PINFUNC_CS (1<<16)
+#define SYS_PINFUNC_CIM (1<<15)
+#define SYS_PINFUNC_P1C (1<<14)
+#define SYS_PINFUNC_U1T (1<<12)
+#define SYS_PINFUNC_U1R (1<<11)
+#define SYS_PINFUNC_EX1 (1<<10)
+#define SYS_PINFUNC_EX0 (1<<9)
+#define SYS_PINFUNC_U0R (1<<8)
+#define SYS_PINFUNC_MC (1<<7)
+#define SYS_PINFUNC_S0B (1<<6)
+#define SYS_PINFUNC_S0C (1<<5)
+#define SYS_PINFUNC_P0B (1<<4)
+#define SYS_PINFUNC_U0T (1<<3)
+#define SYS_PINFUNC_S1B (1<<2)
+#endif
+
#define SYS_TRIOUTRD 0xB1900100
#define SYS_TRIOUTCLR 0xB1900100
#define SYS_OUTPUTRD 0xB1900108
@@ -1298,7 +1693,6 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#define SD1_XMIT_FIFO 0xB0680000
#define SD1_RECV_FIFO 0xB0680004
-
#if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
@@ -1388,9 +1782,60 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]
#endif
+#ifndef _LANGUAGE_ASSEMBLY
+typedef volatile struct
+{
+ /* 0x0000 */ u32 toytrim;
+ /* 0x0004 */ u32 toywrite;
+ /* 0x0008 */ u32 toymatch0;
+ /* 0x000C */ u32 toymatch1;
+ /* 0x0010 */ u32 toymatch2;
+ /* 0x0014 */ u32 cntrctrl;
+ /* 0x0018 */ u32 scratch0;
+ /* 0x001C */ u32 scratch1;
+ /* 0x0020 */ u32 freqctrl0;
+ /* 0x0024 */ u32 freqctrl1;
+ /* 0x0028 */ u32 clksrc;
+ /* 0x002C */ u32 pinfunc;
+ /* 0x0030 */ u32 reserved0;
+ /* 0x0034 */ u32 wakemsk;
+ /* 0x0038 */ u32 endian;
+ /* 0x003C */ u32 powerctrl;
+ /* 0x0040 */ u32 toyread;
+ /* 0x0044 */ u32 rtctrim;
+ /* 0x0048 */ u32 rtcwrite;
+ /* 0x004C */ u32 rtcmatch0;
+ /* 0x0050 */ u32 rtcmatch1;
+ /* 0x0054 */ u32 rtcmatch2;
+ /* 0x0058 */ u32 rtcread;
+ /* 0x005C */ u32 wakesrc;
+ /* 0x0060 */ u32 cpupll;
+ /* 0x0064 */ u32 auxpll;
+ /* 0x0068 */ u32 reserved1;
+ /* 0x006C */ u32 reserved2;
+ /* 0x0070 */ u32 reserved3;
+ /* 0x0074 */ u32 reserved4;
+ /* 0x0078 */ u32 slppwr;
+ /* 0x007C */ u32 sleep;
+ /* 0x0080 */ u32 reserved5[32];
+ /* 0x0100 */ u32 trioutrd;
+#define trioutclr trioutrd
+ /* 0x0104 */ u32 reserved6;
+ /* 0x0108 */ u32 outputrd;
+#define outputset outputrd
+ /* 0x010C */ u32 outputclr;
+ /* 0x0110 */ u32 pinstaterd;
+#define pininputen pinstaterd
+
+} AU1X00_SYS;
+
+static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
+
+#endif
/* Processor information base on prid.
* Copied from PowerPC.
*/
+#ifndef _LANGUAGE_ASSEMBLY
struct cpu_spec {
/* CPU is matched via (PRID & prid_mask) == prid_value */
unsigned int prid_mask;
@@ -1404,3 +1849,6 @@ struct cpu_spec {
extern struct cpu_spec cpu_specs[];
extern struct cpu_spec *cur_cpu_spec[];
#endif
+
+#endif
+
Index: linux-2.4.35.4/include/asm-mips/au1000_pcmcia.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/au1000_pcmcia.h
+++ linux-2.4.35.4/include/asm-mips/au1000_pcmcia.h
@@ -38,16 +38,41 @@
#define AU1X_SOCK0_PHYS_MEM 0xF80000000
/* pcmcia socket 1 needs external glue logic so the memory map
- * differs from board to board.
+ * differs from board to board. the general rule is that
+ * static bus address bit 26 should be used to decode socket 0
+ * from socket 1. alas, some boards dont follow this...
+ * These really belong in a board-specific header file...
*/
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500)
-#define AU1X_SOCK1_IO 0xF08000000
-#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
-#define AU1X_SOCK1_PHYS_MEM 0xF88000000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
-#define AU1X_SOCK1_IO 0xF04000000
-#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
-#define AU1X_SOCK1_PHYS_MEM 0xF84000000
+#ifdef CONFIG_MIPS_PB1000
+#define SOCK1_DECODE (1<<27)
+#endif
+#ifdef CONFIG_MIPS_DB1000
+#define SOCK1_DECODE (1<<26)
+#endif
+#ifdef CONFIG_MIPS_DB1500
+#define SOCK1_DECODE (1<<26)
+#endif
+#ifdef CONFIG_MIPS_DB1100
+#define SOCK1_DECODE (1<<26)
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#define SOCK1_DECODE (1<<26)
+#endif
+#ifdef CONFIG_MIPS_DB1200
+#define SOCK1_DECODE (1<<26)
+#endif
+#ifdef CONFIG_MIPS_PB1550
+#define SOCK1_DECODE (1<<26)
+#endif
+#ifdef CONFIG_MIPS_PB1200
+#define SOCK1_DECODE (1<<26)
+#endif
+
+/* The board has a second PCMCIA socket */
+#ifdef SOCK1_DECODE
+#define AU1X_SOCK1_IO (0xF00000000|SOCK1_DECODE)
+#define AU1X_SOCK1_PHYS_ATTR (0xF40000000|SOCK1_DECODE)
+#define AU1X_SOCK1_PHYS_MEM (0xF80000000|SOCK1_DECODE)
#endif
struct pcmcia_state {
Index: linux-2.4.35.4/include/asm-mips/au1100_mmc.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/au1100_mmc.h
+++ linux-2.4.35.4/include/asm-mips/au1100_mmc.h
@@ -39,16 +39,22 @@
#define __ASM_AU1100_MMC_H
-#define NUM_AU1100_MMC_CONTROLLERS 2
-
-
-#define AU1100_SD_IRQ 2
-
+#if defined(CONFIG_SOC_AU1100)
+#define NUM_MMC_CONTROLLERS 2
+#define AU1X_MMC_INT AU1100_SD_INT
+#endif
+
+#if defined(CONFIG_SOC_AU1200)
+#define NUM_MMC_CONTROLLERS 2
+#define AU1X_MMC_INT AU1200_SD_INT
+#endif
#define SD0_BASE 0xB0600000
#define SD1_BASE 0xB0680000
+
+
/*
* Register offsets.
*/
@@ -201,5 +207,12 @@
#define SD_CMD_RT_1B (0x00810000)
+/* support routines required on a platform-specific basis */
+extern void mmc_card_inserted(int _n_, int *_res_);
+extern void mmc_card_writable(int _n_, int *_res_);
+extern void mmc_power_on(int _n_);
+extern void mmc_power_off(int _n_);
+
+
#endif /* __ASM_AU1100_MMC_H */
Index: linux-2.4.35.4/include/asm-mips/au1xxx_dbdma.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/au1xxx_dbdma.h
+++ linux-2.4.35.4/include/asm-mips/au1xxx_dbdma.h
@@ -43,7 +43,7 @@
#define DDMA_GLOBAL_BASE 0xb4003000
#define DDMA_CHANNEL_BASE 0xb4002000
-typedef struct dbdma_global {
+typedef volatile struct dbdma_global {
u32 ddma_config;
u32 ddma_intstat;
u32 ddma_throttle;
@@ -60,7 +60,7 @@ typedef struct dbdma_global {
/* The structure of a DMA Channel.
*/
-typedef struct au1xxx_dma_channel {
+typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
u32 ddma_statptr; /* word aligned pointer to status word */
@@ -96,7 +96,7 @@ typedef struct au1xxx_dma_channel {
/* "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
-typedef struct au1xxx_ddma_desc {
+typedef volatile struct au1xxx_ddma_desc {
u32 dscr_cmd0; /* See below */
u32 dscr_cmd1; /* See below */
u32 dscr_source0; /* source phys address */
@@ -105,6 +105,12 @@ typedef struct au1xxx_ddma_desc {
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
+ /* First 32bytes are HW specific!!!
+ Lets have some SW data following.. make sure its 32bytes
+ */
+ u32 sw_status;
+ u32 sw_context;
+ u32 sw_reserved[6];
} au1x_ddma_desc_t;
#define DSCR_CMD0_V (1 << 31) /* Descriptor valid */
@@ -123,6 +129,8 @@ typedef struct au1xxx_ddma_desc {
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
+#define SW_STATUS_INUSE (1<<0)
+
/* Command 0 device IDs.
*/
#ifdef CONFIG_SOC_AU1550
@@ -169,8 +177,8 @@ typedef struct au1xxx_ddma_desc {
#define DSCR_CMD0_SDMS_RX0 9
#define DSCR_CMD0_SDMS_TX1 10
#define DSCR_CMD0_SDMS_RX1 11
-#define DSCR_CMD0_AES_TX 12
-#define DSCR_CMD0_AES_RX 13
+#define DSCR_CMD0_AES_TX 13
+#define DSCR_CMD0_AES_RX 12
#define DSCR_CMD0_PSC0_TX 14
#define DSCR_CMD0_PSC0_RX 15
#define DSCR_CMD0_PSC1_TX 16
@@ -189,6 +197,10 @@ typedef struct au1xxx_ddma_desc {
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
+/* THis macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x,d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
+
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
@@ -277,6 +289,43 @@ typedef struct au1xxx_ddma_desc {
*/
#define NUM_DBDMA_CHANS 16
+/*
+ * Ddma API definitions
+ * FIXME: may not fit to this header file
+ */
+typedef struct dbdma_device_table {
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
+} dbdev_tab_t;
+
+
+typedef struct dbdma_chan_config {
+ spinlock_t lock;
+
+ u32 chan_flags;
+ u32 chan_index;
+ dbdev_tab_t *chan_src;
+ dbdev_tab_t *chan_dest;
+ au1x_dma_chan_t *chan_ptr;
+ au1x_ddma_desc_t *chan_desc_base;
+ au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
+ void *chan_callparam;
+ void (*chan_callback)(int, void *, struct pt_regs *);
+} chan_tab_t;
+
+#define DEV_FLAGS_INUSE (1 << 0)
+#define DEV_FLAGS_ANYUSE (1 << 1)
+#define DEV_FLAGS_OUT (1 << 2)
+#define DEV_FLAGS_IN (1 << 3)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_SYNC (1 << 5)
+/* end Ddma API definitions */
+
/* External functions for drivers to use.
*/
/* Use this to allocate a dbdma channel. The device ids are one of the
@@ -299,8 +348,8 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid,
/* Put buffers on source/destination descriptors.
*/
-u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes);
-u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes);
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
+u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
/* Get a buffer from the destination descriptor.
*/
@@ -314,5 +363,25 @@ u32 au1xxx_get_dma_residue(u32 chanid);
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+
+u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
+
+/*
+ Some compatibilty macros --
+ Needed to make changes to API without breaking existing drivers
+*/
+#define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+
+#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+
+/*
+ * Flags for the put_source/put_dest functions.
+ */
+#define DDMA_FLAGS_IE (1<<0)
+#define DDMA_FLAGS_NOIE (1<<1)
+
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */
Index: linux-2.4.35.4/include/asm-mips/au1xxx_gpio.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/include/asm-mips/au1xxx_gpio.h
@@ -0,0 +1,22 @@
+
+
+#ifndef __AU1XXX_GPIO_H
+#define __AU1XXX_GPIO_H
+
+void au1xxx_gpio1_set_inputs(void);
+void au1xxx_gpio_tristate(int signal);
+void au1xxx_gpio_write(int signal, int value);
+int au1xxx_gpio_read(int signal);
+
+typedef volatile struct
+{
+ u32 dir;
+ u32 reserved;
+ u32 output;
+ u32 pinstate;
+ u32 inten;
+ u32 enable;
+
+} AU1X00_GPIO2;
+
+#endif //__AU1XXX_GPIO_H
Index: linux-2.4.35.4/include/asm-mips/au1xxx_psc.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/au1xxx_psc.h
+++ linux-2.4.35.4/include/asm-mips/au1xxx_psc.h
@@ -41,6 +41,11 @@
#define PSC3_BASE_ADDR 0xb0d00000
#endif
+#ifdef CONFIG_SOC_AU1200
+#define PSC0_BASE_ADDR 0xb1a00000
+#define PSC1_BASE_ADDR 0xb1b00000
+#endif
+
/* The PSC select and control registers are common to
* all protocols.
*/
@@ -226,6 +231,8 @@ typedef struct psc_i2s {
#define PSC_I2SCFG_DD_DISABLE (1 << 27)
#define PSC_I2SCFG_DE_ENABLE (1 << 26)
#define PSC_I2SCFG_SET_WS(x) (((((x) / 2) - 1) & 0x7f) << 16)
+#define PSC_I2SCFG_WS(n) ((n&0xFF)<<16)
+#define PSC_I2SCFG_WS_MASK (PSC_I2SCFG_WS(0x3F))
#define PSC_I2SCFG_WI (1 << 15)
#define PSC_I2SCFG_DIV_MASK (3 << 13)
Index: linux-2.4.35.4/include/asm-mips/bootinfo.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/bootinfo.h
+++ linux-2.4.35.4/include/asm-mips/bootinfo.h
@@ -180,6 +180,9 @@
#define MACH_MTX1 7 /* 4G MTX-1 Au1500-based board */
#define MACH_CSB250 8 /* Cogent Au1500 */
#define MACH_PB1550 9 /* Au1550-based eval board */
+#define MACH_PB1200 10 /* Au1200-based eval board */
+#define MACH_DB1550 11 /* Au1550-based eval board */
+#define MACH_DB1200 12 /* Au1200-based eval board */
/*
* Valid machtype for group NEC_VR41XX
Index: linux-2.4.35.4/include/asm-mips/db1200.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/include/asm-mips/db1200.h
@@ -0,0 +1,214 @@
+/*
+ * AMD Alchemy DB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_DB1200_H
+#define __ASM_DB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xB9800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+#define BCSR_RESETS_TV 0x0010
+/* not resets but in the same register */
+#define BCSR_RESETS_PWMR1mUX 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+
+#define BCSR_LEDS_DECIMALS 0x0003
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x19000300)
+#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
+#define AU1XXX_ATA_PHYS_LEN (0x100)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_INT DB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x20000000
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the DB1200_INT_BEGIN value.
+ * *example: IDE bis pos is = 64 - 64
+ ETH bit pos is = 65 - 64
+ */
+#define DB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
+#define DB1200_IDE_INT (DB1200_INT_BEGIN + 0)
+#define DB1200_ETH_INT (DB1200_INT_BEGIN + 1)
+#define DB1200_PC0_INT (DB1200_INT_BEGIN + 2)
+#define DB1200_PC0_STSCHG_INT (DB1200_INT_BEGIN + 3)
+#define DB1200_PC1_INT (DB1200_INT_BEGIN + 4)
+#define DB1200_PC1_STSCHG_INT (DB1200_INT_BEGIN + 5)
+#define DB1200_DC_INT (DB1200_INT_BEGIN + 6)
+#define DB1200_FLASHBUSY_INT (DB1200_INT_BEGIN + 7)
+#define DB1200_PC0_INSERT_INT (DB1200_INT_BEGIN + 8)
+#define DB1200_PC0_EJECT_INT (DB1200_INT_BEGIN + 9)
+#define DB1200_PC1_INSERT_INT (DB1200_INT_BEGIN + 10)
+#define DB1200_PC1_EJECT_INT (DB1200_INT_BEGIN + 11)
+#define DB1200_SD0_INSERT_INT (DB1200_INT_BEGIN + 12)
+#define DB1200_SD0_EJECT_INT (DB1200_INT_BEGIN + 13)
+
+#define DB1200_INT_END (DB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_DB1200_H */
+
Index: linux-2.4.35.4/include/asm-mips/db1x00.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/db1x00.h
+++ linux-2.4.35.4/include/asm-mips/db1x00.h
@@ -1,5 +1,5 @@
/*
- * AMD Alchemy DB1x00 Reference Boards
+ * AMD Alchemy DB1x00 Reference Boards (BUT NOT DB1200)
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
@@ -36,9 +36,18 @@
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define NAND_CS 1
+/* for drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT AU1000_GPIO_3
+#define BOARD_PC1_INT AU1000_GPIO_5
+#define BOARD_CARD_INSERTED(SOCKET) !(bcsr->status & (1<<(4+SOCKET)))
#else
#define BCSR_KSEG1_ADDR 0xAE000000
+/* for drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT AU1000_GPIO_2
+#define BOARD_PC1_INT AU1000_GPIO_5
+#define BOARD_CARD_INSERTED(SOCKET) !(bcsr->status & (1<<(4+SOCKET)))
#endif
/*
@@ -66,6 +75,7 @@ typedef volatile struct
} BCSR;
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
/*
* Register/mask bit definitions for the BCSRs
@@ -130,14 +140,6 @@ typedef volatile struct
#define BCSR_SWRESET_RESET 0x0080
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
/* MTD CONFIG OPTIONS */
#if defined(CONFIG_MTD_DB1X00_BOOT) && defined(CONFIG_MTD_DB1X00_USER)
#define DB1X00_BOTH_BANKS
@@ -147,48 +149,15 @@ typedef volatile struct
#define DB1X00_USER_ONLY
#endif
-/* SD controller macros */
-/*
- * Detect card.
- */
-#define mmc_card_inserted(_n_, _res_) \
- do { \
- BCSR * const bcsr = (BCSR *)0xAE000000; \
- unsigned long mmc_wp, board_specific; \
- if ((_n_)) { \
- mmc_wp = BCSR_BOARD_SD1_WP; \
- } else { \
- mmc_wp = BCSR_BOARD_SD0_WP; \
- } \
- board_specific = au_readl((unsigned long)(&bcsr->specific)); \
- if (!(board_specific & mmc_wp)) {/* low means card present */ \
- *(int *)(_res_) = 1; \
- } else { \
- *(int *)(_res_) = 0; \
- } \
- } while (0)
-
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550)
/*
- * Apply power to card slot(s).
+ * Daughter card information.
*/
-#define mmc_power_on(_n_) \
- do { \
- BCSR * const bcsr = (BCSR *)0xAE000000; \
- unsigned long mmc_pwr, mmc_wp, board_specific; \
- if ((_n_)) { \
- mmc_pwr = BCSR_BOARD_SD1_PWR; \
- mmc_wp = BCSR_BOARD_SD1_WP; \
- } else { \
- mmc_pwr = BCSR_BOARD_SD0_PWR; \
- mmc_wp = BCSR_BOARD_SD0_WP; \
- } \
- board_specific = au_readl((unsigned long)(&bcsr->specific)); \
- if (!(board_specific & mmc_wp)) {/* low means card present */ \
- board_specific |= mmc_pwr; \
- au_writel(board_specific, (int)(&bcsr->specific)); \
- au_sync(); \
- } \
- } while (0)
+#define DAUGHTER_CARD_IRQ (AU1000_GPIO_8)
+/* DC_IDE */
+#define AU1XXX_ATA_PHYS_ADDR (0x0C000000)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#endif /* CONFIG_MIPS_DB1550 */
#endif /* __ASM_DB1X00_H */
Index: linux-2.4.35.4/include/asm-mips/elf.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/elf.h
+++ linux-2.4.35.4/include/asm-mips/elf.h
@@ -66,9 +66,10 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_N
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE PAGE_SIZE
-#define ELF_CORE_COPY_REGS(_dest,_regs) \
- memcpy((char *) &_dest, (char *) _regs, \
- sizeof(struct pt_regs));
+extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
+
+#define ELF_CORE_COPY_REGS(elf_regs, regs) \
+ dump_regs((elf_greg_t *)&(elf_regs), regs);
/* This yields a mask that user programs can use to figure out what
instruction set this cpu supports. This could be done in userspace,
Index: linux-2.4.35.4/include/asm-mips/ficmmp.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/include/asm-mips/ficmmp.h
@@ -0,0 +1,156 @@
+/*
+ * FIC MMP
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_FICMMP_H
+#define __ASM_FICMMP_H
+
+#include <linux/types.h>
+#include <asm/au1000.h>
+#include <asm/au1xxx_gpio.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+
+/*
+ * SMSC LAN91C111
+ */
+#define AU1XXX_SMC91111_PHYS_ADDR (0xAC000300)
+#define AU1XXX_SMC91111_IRQ AU1000_GPIO_5
+
+/* DC_IDE and DC_ETHERNET */
+#define FICMMP_IDE_INT AU1000_GPIO_4
+
+#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
+#define AU1XXX_ATA_REG_OFFSET (5)
+/*
+#define AU1XXX_ATA_BASE (0x0C800000)
+#define AU1XXX_ATA_END (0x0CFFFFFF)
+#define AU1XXX_ATA_MEM_SIZE (AU1XXX_ATA_END - AU1XXX_ATA_BASE +1)
+
+#define AU1XXX_ATA_REG_OFFSET (5)
+*/
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT)\
+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+
+
+#define FICMMP_CONFIG_BASE 0xAD000000
+#define FICMMP_CONFIG_ENABLE 13
+
+#define FICMMP_CONFIG_I2SFREQ(N) (N<<0)
+#define FICMMP_CONFIG_I2SXTAL0 (1<<0)
+#define FICMMP_CONFIG_I2SXTAL1 (1<<1)
+#define FICMMP_CONFIG_I2SXTAL2 (1<<2)
+#define FICMMP_CONFIG_I2SXTAL3 (1<<3)
+#define FICMMP_CONFIG_ADV1 (1<<4)
+#define FICMMP_CONFIG_IDERST (1<<5)
+#define FICMMP_CONFIG_LCMEN (1<<6)
+#define FICMMP_CONFIG_CAMPWDN (1<<7)
+#define FICMMP_CONFIG_USBPWREN (1<<8)
+#define FICMMP_CONFIG_LCMPWREN (1<<9)
+#define FICMMP_CONFIG_TVOUTPWREN (1<<10)
+#define FICMMP_CONFIG_RS232PWREN (1<<11)
+#define FICMMP_CONFIG_LCMDATAOUT (1<<12)
+#define FICMMP_CONFIG_TVODATAOUT (1<<13)
+#define FICMMP_CONFIG_ADV3 (1<<14)
+#define FICMMP_CONFIG_ADV4 (1<<15)
+
+#define I2S_FREQ_8_192 (0x0)
+#define I2S_FREQ_11_2896 (0x1)
+#define I2S_FREQ_12_288 (0x2)
+#define I2S_FREQ_24_576 (0x3)
+//#define I2S_FREQ_12_288 (0x4)
+#define I2S_FREQ_16_9344 (0x5)
+#define I2S_FREQ_18_432 (0x6)
+#define I2S_FREQ_36_864 (0x7)
+#define I2S_FREQ_16_384 (0x8)
+#define I2S_FREQ_22_5792 (0x9)
+//#define I2S_FREQ_24_576 (0x10)
+#define I2S_FREQ_49_152 (0x11)
+//#define I2S_FREQ_24_576 (0x12)
+#define I2S_FREQ_33_8688 (0x13)
+//#define I2S_FREQ_36_864 (0x14)
+#define I2S_FREQ_73_728 (0x15)
+
+#define FICMMP_IDE_PWR 9
+#define FICMMP_FOCUS_RST 2
+
+static __inline void ficmmp_config_set(u16 bits)
+{
+ extern u16 ficmmp_config;
+ //printk("set_config: %X, Old: %X, New: %X\n", bits, ficmmp_config, ficmmp_config | bits);
+ ficmmp_config |= bits;
+ *((u16*)FICMMP_CONFIG_BASE) = ficmmp_config;
+}
+
+static __inline void ficmmp_config_clear(u16 bits)
+{
+ extern u16 ficmmp_config;
+// printk("clear_config: %X, Old: %X, New: %X\n", bits, ficmmp_config, ficmmp_config & ~bits);
+ ficmmp_config &= ~bits;
+ *((u16*)FICMMP_CONFIG_BASE) = ficmmp_config;
+}
+
+static __inline void ficmmp_config_init(void)
+{
+ au1xxx_gpio_write(FICMMP_CONFIG_ENABLE, 0); //Enable configuration latch
+ ficmmp_config_set(FICMMP_CONFIG_LCMDATAOUT | FICMMP_CONFIG_TVODATAOUT | FICMMP_CONFIG_IDERST); //Disable display data buffers
+ ficmmp_config_set(FICMMP_CONFIG_I2SFREQ(I2S_FREQ_36_864));
+}
+
+static __inline u32 ficmmp_set_i2s_sample_rate(u32 rate)
+{
+ u32 freq;
+
+ switch(rate)
+ {
+ case 88200:
+ case 44100:
+ case 8018: freq = I2S_FREQ_11_2896; break;
+ case 48000:
+ case 32000: //freq = I2S_FREQ_18_432; break;
+ case 8000: freq = I2S_FREQ_12_288; break;
+ default: freq = I2S_FREQ_12_288; rate = 8000;
+ }
+ ficmmp_config_clear(FICMMP_CONFIG_I2SFREQ(0xF));
+ ficmmp_config_set(FICMMP_CONFIG_I2SFREQ(freq));
+ return rate;
+}
+
+#endif /* __ASM_FICMMP_H */
+
Index: linux-2.4.35.4/include/asm-mips/hazards.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/hazards.h
+++ linux-2.4.35.4/include/asm-mips/hazards.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle
*/
#ifndef _ASM_HAZARDS_H
#define _ASM_HAZARDS_H
@@ -12,38 +12,200 @@
#ifdef __ASSEMBLY__
+ .macro _ssnop
+ sll $0, $0, 1
+ .endm
+
/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
* for data translations should not occur for 3 cpu cycles.
*/
#ifdef CONFIG_CPU_RM9000
-#define rm9000_tlb_hazard \
+
+#define mtc0_tlbw_hazard \
.set push; \
.set mips32; \
- ssnop; ssnop; ssnop; ssnop; \
+ _ssnop; _ssnop; _ssnop; _ssnop; \
.set pop
+
+#define tlbw_eret_hazard \
+ .set push; \
+ .set mips32; \
+ _ssnop; _ssnop; _ssnop; _ssnop; \
+ .set pop
+
#else
-#define rm9000_tlb_hazard
+
+/*
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400. Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+#define mtc0_tlbw_hazard \
+ b . + 8
+#define tlbw_eret_hazard \
+ nop
#endif
+/*
+ * mtc0->mfc0 hazard
+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
+ * It is a MIPS32R2 processor so ehb will clear the hazard.
+ */
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
+ */
+ .macro ehb
+ sll $0, $0, 3
+ .endm
+
+#define irq_enable_hazard \
+ ehb # irq_enable_hazard
+
+#define irq_disable_hazard \
+ ehb # irq_disable_hazard
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+#define irq_enable_hazard
+
+#define irq_disable_hazard
+
#else
/*
+ * Classic MIPS needs 1 - 3 nops or ssnops
+ */
+#define irq_enable_hazard
+#define irq_disable_hazard \
+ _ssnop; _ssnop; _ssnop
+
+#endif
+
+#else /* __ASSEMBLY__ */
+
+/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
* for data translations should not occur for 3 cpu cycles.
*/
#ifdef CONFIG_CPU_RM9000
-#define rm9000_tlb_hazard() \
+
+#define mtc0_tlbw_hazard() \
__asm__ __volatile__( \
".set\tmips32\n\t" \
- "ssnop; ssnop; ssnop; ssnop\n\t" \
+ "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
+ ".set\tmips0")
+
+#define tlbw_use_hazard() \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
#else
-#define rm9000_tlb_hazard() do { } while (0)
+
+/*
+ * Overkill warning ...
+ */
+#define mtc0_tlbw_hazard() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+#define tlbw_use_hazard() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
#endif
+/*
+ * mtc0->mfc0 hazard
+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
+ * It is a MIPS32R2 processor so ehb will clear the hazard.
+ */
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
+ */
+__asm__(
+ " .macro ehb \n\t"
+ " sll $0, $0, 3 \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_enable_hazard \n\t"
+ " ehb \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_disable_hazard \n\t"
+ " ehb \n\t"
+ " .endm");
+
+#define irq_enable_hazard() \
+ __asm__ __volatile__( \
+ "ehb\t\t\t\t# irq_enable_hazard")
+
+#define irq_disable_hazard() \
+ __asm__ __volatile__( \
+ "ehb\t\t\t\t# irq_disable_hazard")
+
+#elif defined(CONFIG_CPU_R10000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+__asm__(
+ " .macro\tirq_enable_hazard \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_disable_hazard \n\t"
+ " .endm");
+
+#define irq_enable_hazard() do { } while (0)
+#define irq_disable_hazard() do { } while (0)
+
+#else
+
+/*
+ * Default for classic MIPS processors. Assume worst case hazards but don't
+ * care about the irq_enable_hazard - sooner or later the hardware will
+ * enable it and we don't care when exactly.
+ */
+
+__asm__(
+ " .macro _ssnop \n\t"
+ " sll $0, $2, 1 \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " # \n\t"
+ " # There is a hazard but we do not care \n\t"
+ " # \n\t"
+ " .macro\tirq_enable_hazard \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_disable_hazard \n\t"
+ " _ssnop; _ssnop; _ssnop \n\t"
+ " .endm");
+
+#define irq_enable_hazard() do { } while (0)
+#define irq_disable_hazard() \
+ __asm__ __volatile__( \
+ "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+
#endif
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_HAZARDS_H */
Index: linux-2.4.35.4/include/asm-mips/ide.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/ide.h
+++ linux-2.4.35.4/include/asm-mips/ide.h
@@ -32,12 +32,12 @@ struct ide_ops {
extern struct ide_ops *ide_ops;
-static __inline__ int ide_default_irq(ide_ioreg_t base)
+static inline int ide_default_irq(ide_ioreg_t base)
{
return ide_ops->ide_default_irq(base);
}
-static __inline__ ide_ioreg_t ide_default_io_base(int index)
+static inline ide_ioreg_t ide_default_io_base(int index)
{
return ide_ops->ide_default_io_base(index);
}
@@ -48,7 +48,7 @@ static inline void ide_init_hwif_ports(h
ide_ops->ide_init_hwif_ports(hw, data_port, ctrl_port, irq);
}
-static __inline__ void ide_init_default_hwifs(void)
+static inline void ide_init_default_hwifs(void)
{
#ifndef CONFIG_BLK_DEV_IDEPCI
hw_regs_t hw;
@@ -68,7 +68,89 @@ static __inline__ void ide_init_default_
#define ide_ack_intr(hwif) ((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
#endif
-#include <asm-generic/ide_iops.h>
+/* MIPS port and memory-mapped I/O string operations. */
+
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+ if (cpu_has_dc_aliases) {
+ unsigned long end = addr + size;
+ for (; addr < end; addr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(addr));
+ }
+}
+
+static inline void __ide_insw(unsigned long port, void *addr,
+ unsigned int count)
+{
+ insw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+ insl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_mm_insw(unsigned long port, void *addr, u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ *(u16 *)addr = readw(port);
+ addr += 2;
+ }
+ __ide_flush_dcache_range(start, count * 2);
+}
+
+static inline void __ide_mm_insl(unsigned long port, void *addr, u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ *(u32 *)addr = readl(port);
+ addr += 4;
+ }
+ __ide_flush_dcache_range(start, count * 4);
+}
+
+static inline void __ide_mm_outsw(unsigned long port, const void *addr,
+ u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ writew(*(u16 *)addr, port);
+ addr += 2;
+ }
+ __ide_flush_dcache_range(start, count * 2);
+}
+
+static inline void __ide_mm_outsl(unsigned long port, const void *addr,
+ u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ writel(*(u32 *)addr, port);
+ addr += 4;
+ }
+ __ide_flush_dcache_range(start, count * 4);
+}
#endif /* __KERNEL__ */
Index: linux-2.4.35.4/include/asm-mips/io.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/io.h
+++ linux-2.4.35.4/include/asm-mips/io.h
@@ -392,7 +392,8 @@ static inline unsigned int inl_p(unsigne
return __ioswab32(__val);
}
-static inline void __outsb(unsigned long port, void *addr, unsigned int count)
+static inline void __outsb(unsigned long port, const void *addr,
+ unsigned int count)
{
while (count--) {
outb(*(u8 *)addr, port);
@@ -408,7 +409,8 @@ static inline void __insb(unsigned long
}
}
-static inline void __outsw(unsigned long port, void *addr, unsigned int count)
+static inline void __outsw(unsigned long port, const void *addr,
+ unsigned int count)
{
while (count--) {
outw(*(u16 *)addr, port);
@@ -424,7 +426,8 @@ static inline void __insw(unsigned long
}
}
-static inline void __outsl(unsigned long port, void *addr, unsigned int count)
+static inline void __outsl(unsigned long port, const void *addr,
+ unsigned int count)
{
while (count--) {
outl(*(u32 *)addr, port);
Index: linux-2.4.35.4/include/asm-mips/mipsregs.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/mipsregs.h
+++ linux-2.4.35.4/include/asm-mips/mipsregs.h
@@ -757,10 +757,18 @@ do { \
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
/*
* The WatchLo register. There may be upto 8 of them.
@@ -874,42 +882,34 @@ do { \
*/
static inline void tlb_probe(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbp\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
static inline void tlb_read(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbr\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
static inline void tlb_write_indexed(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbwi\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
static inline void tlb_write_random(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbwr\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
/*
Index: linux-2.4.35.4/include/asm-mips/mmu_context.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/mmu_context.h
+++ linux-2.4.35.4/include/asm-mips/mmu_context.h
@@ -27,7 +27,7 @@
#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
pgd_current[smp_processor_id()] = (unsigned long)(pgd)
#define TLBMISS_HANDLER_SETUP() \
- write_c0_context((unsigned long) smp_processor_id() << (23 + 3)); \
+ write_c0_context((unsigned long) smp_processor_id() << 23); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
extern unsigned long pgd_current[];
Index: linux-2.4.35.4/include/asm-mips/pb1100.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/pb1100.h
+++ linux-2.4.35.4/include/asm-mips/pb1100.h
@@ -1,5 +1,5 @@
/*
- * Alchemy Semi PB1100 Referrence Board
+ * AMD Alchemy PB1100 Reference Boards
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
@@ -27,55 +27,108 @@
#ifndef __ASM_PB1100_H
#define __ASM_PB1100_H
-#define PB1100_IDENT 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
- #define PB1100_ROM_SEL (1<<15)
- #define PB1100_ROM_SIZ (1<<14)
- #define PB1100_SWAP_BOOT (1<<13)
- #define PB1100_FLASH_WP (1<<12)
- #define PB1100_ROM_H_STS (1<<11)
- #define PB1100_ROM_L_STS (1<<10)
- #define PB1100_FLASH_H_STS (1<<9)
- #define PB1100_FLASH_L_STS (1<<8)
- #define PB1100_SRAM_SIZ (1<<7)
- #define PB1100_TSC_BUSY (1<<6)
- #define PB1100_PCMCIA_VS_MASK (3<<4)
- #define PB1100_RS232_CD (1<<3)
- #define PB1100_RS232_CTS (1<<2)
- #define PB1100_RS232_DSR (1<<1)
- #define PB1100_RS232_RI (1<<0)
-
-#define PB1100_IRDA_RS232 0xAE00000C
- #define PB1100_IRDA_FULL (0<<14) /* full power */
- #define PB1100_IRDA_SHUTDOWN (1<<14)
- #define PB1100_IRDA_TT (2<<14) /* 2/3 power */
- #define PB1100_IRDA_OT (3<<14) /* 1/3 power */
- #define PB1100_IRDA_FIR (1<<13)
-
-#define PCMCIA_BOARD_REG 0xAE000010
- #define PB1100_SD_WP1_RO (1<<15) /* read only */
- #define PB1100_SD_WP0_RO (1<<14) /* read only */
- #define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */
- #define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */
- #define PB1100_SEL_SD_CONN1 (1<<9)
- #define PB1100_SEL_SD_CONN0 (1<<8)
- #define PC_DEASSERT_RST (1<<7)
- #define PC_DRV_EN (1<<4)
-
-#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
-
-#define PB1100_RST_VDDI 0xAE00001C
- #define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */
- #define PB1100_VDDI_MASK (0x1F)
+#define BCSR_KSEG1_ADDR 0xAE000000
+
+/*
+ * Overlay data structure of the Pb1100 board registers.
+ * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
+ */
+typedef volatile struct
+{
+ /*00*/ unsigned short whoami;
+ unsigned short reserved0;
+ /*04*/ unsigned short status;
+ unsigned short reserved1;
+ /*08*/ unsigned short switches;
+ unsigned short reserved2;
+ /*0C*/ unsigned short resets;
+ unsigned short reserved3;
+ /*10*/ unsigned short pcmcia;
+ unsigned short reserved4;
+ /*14*/ unsigned short graphics;
+ unsigned short reserved5;
+ /*18*/ unsigned short leds;
+ unsigned short reserved6;
+ /*1C*/ unsigned short swreset;
+ unsigned short reserved7;
+
+} BCSR;
-#define PB1100_LEDS 0xAE000018
-/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0 is the LED Display's decimal points.
+/*
+ * Register/mask bit definitions for the BCSRs
*/
-#define PB1100_HEX_LED 0xAE000018
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_RS232_RI 0x0001
+#define BCSR_STATUS_RS232_DSR 0x0002
+#define BCSR_STATUS_RS232_CTS 0x0004
+#define BCSR_STATUS_RS232_CD 0x0008
+#define BCSR_STATUS_PCMCIA_VS_MASK 0x0030
+#define BCSR_STATUS_TSC_BUSY 0x0040
+#define BCSR_STATUS_SRAM_SIZ 0x0080
+#define BCSR_STATUS_FLASH_L_STS 0x0100
+#define BCSR_STATUS_FLASH_H_STS 0x0200
+#define BCSR_STATUS_ROM_H_STS 0x0400
+#define BCSR_STATUS_ROM_L_STS 0x0800
+#define BCSR_STATUS_FLASH_WP 0x1000
+#define BCSR_STATUS_SWAP_BOOT 0x2000
+#define BCSR_STATUS_ROM_SIZ 0x4000
+#define BCSR_STATUS_ROM_SEL 0x8000
+
+#define BCSR_SWITCHES_DIP 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+#define BCSR_SWITCHES_SDO_CL 0x8000
+
+#define BCSR_RESETS_PHY0 0x0001
+#define BCSR_RESETS_PHY1 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_RS232_RTS 0x0100
+#define BCSR_RESETS_RS232_DTR 0x0200
+#define BCSR_RESETS_FIR_SEL 0x2000
+#define BCSR_RESETS_IRDA_MODE_MASK 0xC000
+#define BCSR_RESETS_IRDA_MODE_FULL 0x0000
+#define BCSR_RESETS_IRDA_MODE_OFF 0x4000
+#define BCSR_RESETS_IRDA_MODE_2_3 0x8000
+#define BCSR_RESETS_IRDA_MODE_1_3 0xC000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0_DR_VEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_SEL_SD_CON0 0x0100
+#define BCSR_PCMCIA_SEL_SD_CON1 0x0200
+#define BCSR_PCMCIA_SD0_PWR 0x0400
+#define BCSR_PCMCIA_SD1_PWR 0x0800
+#define BCSR_PCMCIA_SD0_WP 0x4000
+#define BCSR_PCMCIA_SD1_WP 0x8000
+
+#define PB1100_G_CONTROL 0xAE000014
+#define BCSR_GRAPHICS_GPX_SMPASS 0x0010
+#define BCSR_GRAPHICS_GPX_BIG_ENDIAN 0x0020
+#define BCSR_GRAPHICS_GPX_RST 0x0040
+
+#define BCSR_LEDS_DECIMALS 0x00FF
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SWRESET_RESET 0x0080
+#define BCSR_VDDI_VDI 0x001F
-/* PCMCIA PB1100 specific defines */
+
+ /* PCMCIA Pb1x00 specific defines */
#define PCMCIA_MAX_SOCK 0
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
@@ -83,3 +136,4 @@
#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
#endif /* __ASM_PB1100_H */
+
Index: linux-2.4.35.4/include/asm-mips/pb1200.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/include/asm-mips/pb1200.h
@@ -0,0 +1,244 @@
+/*
+ * AMD Alchemy PB1200 Referrence Board
+ * Board Registers defines.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ *
+ */
+#ifndef __ASM_PB1200_H
+#define __ASM_PB1200_H
+
+#include <linux/types.h>
+
+// This is defined in au1000.h with bogus value
+#undef AU1X00_EXTERNAL_INT
+
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+
+/* SPI and SMB are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/* AC97 and I2S are muxed on the Pb1200 board.
+ Refer to board documentation.
+ */
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define I2S_PSC_BASE PSC1_BASE_ADDR
+
+#define BCSR_KSEG1_ADDR 0xAD800000
+
+typedef volatile struct
+{
+ /*00*/ u16 whoami;
+ u16 reserved0;
+ /*04*/ u16 status;
+ u16 reserved1;
+ /*08*/ u16 switches;
+ u16 reserved2;
+ /*0C*/ u16 resets;
+ u16 reserved3;
+
+ /*10*/ u16 pcmcia;
+ u16 reserved4;
+ /*14*/ u16 board;
+ u16 reserved5;
+ /*18*/ u16 disk_leds;
+ u16 reserved6;
+ /*1C*/ u16 system;
+ u16 reserved7;
+
+ /*20*/ u16 intclr;
+ u16 reserved8;
+ /*24*/ u16 intset;
+ u16 reserved9;
+ /*28*/ u16 intclr_mask;
+ u16 reserved10;
+ /*2C*/ u16 intset_mask;
+ u16 reserved11;
+
+ /*30*/ u16 sig_status;
+ u16 reserved12;
+ /*34*/ u16 int_status;
+ u16 reserved13;
+ /*38*/ u16 reserved14;
+ u16 reserved15;
+ /*3C*/ u16 reserved16;
+ u16 reserved17;
+
+} BCSR;
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+/*
+ * Register bit definitions for the BCSRs
+ */
+#define BCSR_WHOAMI_DCID 0x000F
+#define BCSR_WHOAMI_CPLD 0x00F0
+#define BCSR_WHOAMI_BOARD 0x0F00
+
+#define BCSR_STATUS_PCMCIA0VS 0x0003
+#define BCSR_STATUS_PCMCIA1VS 0x000C
+#define BCSR_STATUS_SWAPBOOT 0x0040
+#define BCSR_STATUS_FLASHBUSY 0x0100
+#define BCSR_STATUS_IDECBLID 0x0200
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
+
+#define BCSR_SWITCHES_OCTAL 0x00FF
+#define BCSR_SWITCHES_DIP_1 0x0080
+#define BCSR_SWITCHES_DIP_2 0x0040
+#define BCSR_SWITCHES_DIP_3 0x0020
+#define BCSR_SWITCHES_DIP_4 0x0010
+#define BCSR_SWITCHES_DIP_5 0x0008
+#define BCSR_SWITCHES_DIP_6 0x0004
+#define BCSR_SWITCHES_DIP_7 0x0002
+#define BCSR_SWITCHES_DIP_8 0x0001
+#define BCSR_SWITCHES_ROTARY 0x0F00
+
+#define BCSR_RESETS_ETH 0x0001
+#define BCSR_RESETS_CAMERA 0x0002
+#define BCSR_RESETS_DC 0x0004
+#define BCSR_RESETS_IDE 0x0008
+/* not resets but in the same register */
+#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_PCS0MUX 0x1000
+#define BCSR_RESETS_PCS1MUX 0x2000
+#define BCSR_RESETS_SPISEL 0x4000
+#define BCSR_RESETS_SD1MUX 0x8000
+
+#define BCSR_PCMCIA_PC0VPP 0x0003
+#define BCSR_PCMCIA_PC0VCC 0x000C
+#define BCSR_PCMCIA_PC0DRVEN 0x0010
+#define BCSR_PCMCIA_PC0RST 0x0080
+#define BCSR_PCMCIA_PC1VPP 0x0300
+#define BCSR_PCMCIA_PC1VCC 0x0C00
+#define BCSR_PCMCIA_PC1DRVEN 0x1000
+#define BCSR_PCMCIA_PC1RST 0x8000
+
+#define BCSR_BOARD_LCDVEE 0x0001
+#define BCSR_BOARD_LCDVDD 0x0002
+#define BCSR_BOARD_LCDBL 0x0004
+#define BCSR_BOARD_CAMSNAP 0x0010
+#define BCSR_BOARD_CAMPWR 0x0020
+#define BCSR_BOARD_SD0PWR 0x0040
+#define BCSR_BOARD_SD1PWR 0x0080
+
+#define BCSR_LEDS_DECIMALS 0x00FF
+#define BCSR_LEDS_LED0 0x0100
+#define BCSR_LEDS_LED1 0x0200
+#define BCSR_LEDS_LED2 0x0400
+#define BCSR_LEDS_LED3 0x0800
+
+#define BCSR_SYSTEM_VDDI 0x001F
+#define BCSR_SYSTEM_POWEROFF 0x4000
+#define BCSR_SYSTEM_RESET 0x8000
+
+/* Bit positions for the different interrupt sources */
+#define BCSR_INT_IDE 0x0001
+#define BCSR_INT_ETH 0x0002
+#define BCSR_INT_PC0 0x0004
+#define BCSR_INT_PC0STSCHG 0x0008
+#define BCSR_INT_PC1 0x0010
+#define BCSR_INT_PC1STSCHG 0x0020
+#define BCSR_INT_DC 0x0040
+#define BCSR_INT_FLASHBUSY 0x0080
+#define BCSR_INT_PC0INSERT 0x0100
+#define BCSR_INT_PC0EJECT 0x0200
+#define BCSR_INT_PC1INSERT 0x0400
+#define BCSR_INT_PC1EJECT 0x0800
+#define BCSR_INT_SD0INSERT 0x1000
+#define BCSR_INT_SD0EJECT 0x2000
+#define BCSR_INT_SD1INSERT 0x4000
+#define BCSR_INT_SD1EJECT 0x8000
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x0D000300)
+#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT
+
+#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
+#define AU1XXX_ATA_PHYS_LEN (0x100)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_INT PB1200_IDE_INT
+#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
+#define AU1XXX_ATA_RQSIZE 128
+
+#define NAND_PHYS_ADDR 0x1C000000
+
+/* Timing values as described in databook, * ns value stripped of
+ * lower 2 bits.
+ * These defines are here rather than an SOC1200 generic file because
+ * the parts chosen on another board may be different and may require
+ * different timings.
+ */
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
+
+/* Bitfield shift amounts */
+#define NAND_T_H_SHIFT 0
+#define NAND_T_PUL_SHIFT 4
+#define NAND_T_SU_SHIFT 8
+#define NAND_T_WH_SHIFT 12
+
+#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+
+
+/*
+ * External Interrupts for Pb1200 as of 8/6/2004.
+ * Bit positions in the CPLD registers can be calculated by taking
+ * the interrupt define and subtracting the PB1200_INT_BEGIN value.
+ * *example: IDE bis pos is = 64 - 64
+ ETH bit pos is = 65 - 64
+ */
+#define PB1200_INT_BEGIN (AU1000_LAST_INTC1_INT + 1)
+#define PB1200_IDE_INT (PB1200_INT_BEGIN + 0)
+#define PB1200_ETH_INT (PB1200_INT_BEGIN + 1)
+#define PB1200_PC0_INT (PB1200_INT_BEGIN + 2)
+#define PB1200_PC0_STSCHG_INT (PB1200_INT_BEGIN + 3)
+#define PB1200_PC1_INT (PB1200_INT_BEGIN + 4)
+#define PB1200_PC1_STSCHG_INT (PB1200_INT_BEGIN + 5)
+#define PB1200_DC_INT (PB1200_INT_BEGIN + 6)
+#define PB1200_FLASHBUSY_INT (PB1200_INT_BEGIN + 7)
+#define PB1200_PC0_INSERT_INT (PB1200_INT_BEGIN + 8)
+#define PB1200_PC0_EJECT_INT (PB1200_INT_BEGIN + 9)
+#define PB1200_PC1_INSERT_INT (PB1200_INT_BEGIN + 10)
+#define PB1200_PC1_EJECT_INT (PB1200_INT_BEGIN + 11)
+#define PB1200_SD0_INSERT_INT (PB1200_INT_BEGIN + 12)
+#define PB1200_SD0_EJECT_INT (PB1200_INT_BEGIN + 13)
+#define PB1200_SD1_INSERT_INT (PB1200_INT_BEGIN + 14)
+#define PB1200_SD1_EJECT_INT (PB1200_INT_BEGIN + 15)
+
+#define PB1200_INT_END (PB1200_INT_BEGIN + 15)
+
+/* For drivers/pcmcia/au1000_db1x00.c */
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+
+#endif /* __ASM_PB1200_H */
+
Index: linux-2.4.35.4/include/asm-mips/pb1550.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/pb1550.h
+++ linux-2.4.35.4/include/asm-mips/pb1550.h
@@ -30,13 +30,11 @@
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define NAND_CS 1
#define BCSR_PHYS_ADDR 0xAF000000
@@ -160,9 +158,23 @@ static BCSR * const bcsr = (BCSR *)BCSR_
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+
+/*
+ * Daughter card information.
+ */
+#define DAUGHTER_CARD_BASE (0xAC000000)
+#define DAUGHTER_CARD_MEM_SIZE (0xADFFFFFF - DAUGHTER_CARD_BASE + 1)
+#define DAUGHTER_CARD_IRQ (AU1000_GPIO_3)
+
+/* DC_IDE and DC_ETHERNET */
+#define AU1XXX_ATA_PHYS_ADDR (0x0C000000)
+#define AU1XXX_ATA_REG_OFFSET (5)
+
+#define AU1XXX_SMC91111_PHYS_ADDR (0x0C000300)
+#define AU1XXX_SMC91111_IRQ AU1000_GPIO_3
#endif /* __ASM_PB1550_H */
Index: linux-2.4.35.4/include/asm-mips/reg.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/reg.h
+++ linux-2.4.35.4/include/asm-mips/reg.h
@@ -45,6 +45,9 @@
/*
* k0/k1 unsaved
*/
+#define EF_REG26 32
+#define EF_REG27 33
+
#define EF_REG28 34
#define EF_REG29 35
#define EF_REG30 36
@@ -60,6 +63,7 @@
#define EF_CP0_BADVADDR 41
#define EF_CP0_STATUS 42
#define EF_CP0_CAUSE 43
+#define EF_UNUSED0 44
#define EF_SIZE 180 /* size in bytes */
Index: linux-2.4.35.4/include/asm-mips/sgi/hpc3.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/sgi/hpc3.h
+++ linux-2.4.35.4/include/asm-mips/sgi/hpc3.h
@@ -128,26 +128,26 @@ struct hpc3_ethregs {
volatile u32 rx_gfptr; /* current GIO fifo ptr */
volatile u32 rx_dfptr; /* current device fifo ptr */
u32 _unused1; /* padding */
- volatile u32 rx_reset; /* reset register */
-#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */
-#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */
-#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
-
- volatile u32 rx_dconfig; /* DMA configuration register */
-#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
-#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
-#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
-#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
-#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
-#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
-#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */
-
- volatile u32 rx_pconfig; /* PIO configuration register */
-#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
-#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
-#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
+ volatile u32 reset; /* reset register */
+#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */
+#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
+
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */
+
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
u32 _unused2[0x1000/4 - 8]; /* padding */
@@ -221,7 +221,7 @@ struct hpc3_regs {
#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */
u32 _unused1[0x14000/4 - 5]; /* padding */
-
+
/* Now direct PIO per-HPC3 peripheral access to external regs. */
volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */
u32 _unused2[0x7c00/4];
@@ -304,7 +304,7 @@ struct hpc3_regs {
volatile u32 bbram[8192-50-14]; /* Battery backed ram */
};
-/*
+/*
* It is possible to have two HPC3's within the address space on
* one machine, though only having one is more likely on an Indy.
*/
Index: linux-2.4.35.4/include/asm-mips/tx4927/tx4927.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/tx4927/tx4927.h
+++ linux-2.4.35.4/include/asm-mips/tx4927/tx4927.h
@@ -88,8 +88,8 @@
/* TX4927 Configuration registers (64-bit registers) */
-#define TX4927_CONFIG_BASE 0xe300
-#define TX4927_CONFIG_CCFG 0xe300
+#define TX4927_CONFIG_BASE 0xe000
+#define TX4927_CONFIG_CCFG 0xe000
#define TX4927_CONFIG_CCFG_RESERVED_42_63 BM_63_42
#define TX4927_CONFIG_CCFG_WDRST BM_41_41
#define TX4927_CONFIG_CCFG_WDREXEN BM_40_40
@@ -124,14 +124,14 @@
#define TX4927_CONFIG_CCFG_ENDIAN BM_02_02
#define TX4927_CONFIG_CCFG_ARMODE BM_01_01
#define TX4927_CONFIG_CCFG_ACEHOLD BM_00_00
-#define TX4927_CONFIG_REVID 0xe308
+#define TX4927_CONFIG_REVID 0xe008
#define TX4927_CONFIG_REVID_RESERVED_32_63 BM_32_63
#define TX4927_CONFIG_REVID_PCODE BM_16_31
#define TX4927_CONFIG_REVID_MJERREV BM_12_15
#define TX4927_CONFIG_REVID_MINEREV BM_08_11
#define TX4927_CONFIG_REVID_MJREV BM_04_07
#define TX4927_CONFIG_REVID_MINREV BM_00_03
-#define TX4927_CONFIG_PCFG 0xe310
+#define TX4927_CONFIG_PCFG 0xe010
#define TX4927_CONFIG_PCFG_RESERVED_57_63 BM_57_63
#define TX4927_CONFIG_PCFG_DRVDATA BM_56_56
#define TX4927_CONFIG_PCFG_DRVCB BM_55_55
@@ -197,10 +197,10 @@
#define TX4927_CONFIG_PCFG_DMASEL0_SIO1 BM_00_00
#define TX4927_CONFIG_PCFG_DMASEL0_ACLC0 BM_01_01
#define TX4927_CONFIG_PCFG_DMASEL0_ACLC2 BM_00_01
-#define TX4927_CONFIG_TOEA 0xe318
+#define TX4927_CONFIG_TOEA 0xe018
#define TX4927_CONFIG_TOEA_RESERVED_36_63 BM_36_63
#define TX4927_CONFIG_TOEA_TOEA BM_00_35
-#define TX4927_CONFIG_CLKCTR 0xe320
+#define TX4927_CONFIG_CLKCTR 0xe020
#define TX4927_CONFIG_CLKCTR_RESERVED_26_63 BM_26_63
#define TX4927_CONFIG_CLKCTR_ACLCKD BM_25_25
#define TX4927_CONFIG_CLKCTR_PIOCKD BM_24_24
@@ -223,7 +223,7 @@
#define TX4927_CONFIG_CLKCTR_TM2RST BM_02_02
#define TX4927_CONFIG_CLKCTR_SIO0RST BM_01_01
#define TX4927_CONFIG_CLKCTR_SIO1RST BM_00_00
-#define TX4927_CONFIG_GARBC 0xe330
+#define TX4927_CONFIG_GARBC 0xe030
#define TX4927_CONFIG_GARBC_RESERVED_10_63 BM_10_63
#define TX4927_CONFIG_GARBC_SET_09 BM_09_09
#define TX4927_CONFIG_GARBC_ARBMD BM_08_08
@@ -243,7 +243,7 @@
#define TX4927_CONFIG_GARBC_PRIORITY_H3_PDMAC BM_00_00
#define TX4927_CONFIG_GARBC_PRIORITY_H3_DMAC BM_01_01
#define TX4927_CONFIG_GARBC_PRIORITY_H3_BAD_VALUE BM_00_01
-#define TX4927_CONFIG_RAMP 0xe348
+#define TX4927_CONFIG_RAMP 0xe048
#define TX4927_CONFIG_RAMP_RESERVED_20_63 BM_20_63
#define TX4927_CONFIG_RAMP_RAMP BM_00_19
#define TX4927_CONFIG_LIMIT 0xefff
@@ -456,7 +456,7 @@
#define TX4927_ACLC_ACINTSTS 0xf710
#define TX4927_ACLC_ACINTMSTS 0xf714
#define TX4927_ACLC_ACINTEN 0xf718
-#define TX4927_ACLC_ACINTDIS 0xfR71c
+#define TX4927_ACLC_ACINTDIS 0xf71c
#define TX4927_ACLC_ACSEMAPH 0xf720
#define TX4927_ACLC_ACGPIDAT 0xf740
#define TX4927_ACLC_ACGPODAT 0xf744
Index: linux-2.4.35.4/include/asm-mips/unistd.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips/unistd.h
+++ linux-2.4.35.4/include/asm-mips/unistd.h
@@ -760,7 +760,7 @@ type name(void) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
/*
@@ -788,7 +788,7 @@ type name(atype a) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall2(type,name,atype,a,btype,b) \
@@ -813,7 +813,7 @@ type name(atype a, btype b) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall3(type,name,atype,a,btype,b,ctype,c) \
@@ -839,7 +839,7 @@ type name(atype a, btype b, ctype c) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
@@ -865,7 +865,7 @@ type name(atype a, btype b, ctype c, dty
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
@@ -902,7 +902,7 @@ type name(atype a, btype b, ctype c, dty
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
@@ -935,7 +935,7 @@ type name(atype a, btype b, ctype c, dty
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#endif /* (_MIPS_SIM == _MIPS_SIM_ABI32) */
@@ -966,7 +966,7 @@ type name (atype a,btype b,ctype c,dtype
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
@@ -995,7 +995,7 @@ type name (atype a,btype b,ctype c,dtype
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#endif /* (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) */
Index: linux-2.4.35.4/include/asm-mips64/checksum.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/checksum.h
+++ linux-2.4.35.4/include/asm-mips64/checksum.h
@@ -144,7 +144,7 @@ static inline unsigned long csum_tcpudp_
"daddu\t%0, %4\n\t"
"dsll32\t$1, %0, 0\n\t"
"daddu\t%0, $1\n\t"
- "dsrl32\t%0, %0, 0\n\t"
+ "dsra32\t%0, %0, 0\n\t"
".set\tat"
: "=&r" (sum)
: "0" (daddr), "r"(saddr),
Index: linux-2.4.35.4/include/asm-mips64/elf.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/elf.h
+++ linux-2.4.35.4/include/asm-mips64/elf.h
@@ -64,9 +64,10 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_N
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE PAGE_SIZE
-#define ELF_CORE_COPY_REGS(_dest,_regs) \
- memcpy((char *) &_dest, (char *) _regs, \
- sizeof(struct pt_regs));
+extern void dump_regs(elf_greg_t *, struct pt_regs *regs);
+
+#define ELF_CORE_COPY_REGS(elf_regs, regs) \
+ dump_regs((elf_greg_t *)&(elf_regs), regs);
/* This yields a mask that user programs can use to figure out what
instruction set this cpu supports. This could be done in userspace,
Index: linux-2.4.35.4/include/asm-mips64/hazards.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/hazards.h
+++ linux-2.4.35.4/include/asm-mips64/hazards.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2003 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle
*/
#ifndef _ASM_HAZARDS_H
#define _ASM_HAZARDS_H
@@ -12,37 +12,200 @@
#ifdef __ASSEMBLY__
+ .macro _ssnop
+ sll $0, $0, 1
+ .endm
+
/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
* for data translations should not occur for 3 cpu cycles.
*/
#ifdef CONFIG_CPU_RM9000
-#define rm9000_tlb_hazard \
+
+#define mtc0_tlbw_hazard \
+ .set push; \
.set mips32; \
- ssnop; ssnop; ssnop; ssnop; \
- .set mips0
+ _ssnop; _ssnop; _ssnop; _ssnop; \
+ .set pop
+
+#define tlbw_eret_hazard \
+ .set push; \
+ .set mips32; \
+ _ssnop; _ssnop; _ssnop; _ssnop; \
+ .set pop
+
#else
-#define rm9000_tlb_hazard
+
+/*
+ * The taken branch will result in a two cycle penalty for the two killed
+ * instructions on R4000 / R4400. Other processors only have a single cycle
+ * hazard so this is nice trick to have an optimal code for a range of
+ * processors.
+ */
+#define mtc0_tlbw_hazard \
+ b . + 8
+#define tlbw_eret_hazard \
+ nop
#endif
+/*
+ * mtc0->mfc0 hazard
+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
+ * It is a MIPS32R2 processor so ehb will clear the hazard.
+ */
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
+ */
+ .macro ehb
+ sll $0, $0, 3
+ .endm
+
+#define irq_enable_hazard \
+ ehb # irq_enable_hazard
+
+#define irq_disable_hazard \
+ ehb # irq_disable_hazard
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+#define irq_enable_hazard
+
+#define irq_disable_hazard
+
#else
/*
+ * Classic MIPS needs 1 - 3 nops or ssnops
+ */
+#define irq_enable_hazard
+#define irq_disable_hazard \
+ _ssnop; _ssnop; _ssnop
+
+#endif
+
+#else /* __ASSEMBLY__ */
+
+/*
* RM9000 hazards. When the JTLB is updated by tlbwi or tlbwr, a subsequent
* use of the JTLB for instructions should not occur for 4 cpu cycles and use
* for data translations should not occur for 3 cpu cycles.
*/
#ifdef CONFIG_CPU_RM9000
-#define rm9000_tlb_hazard() \
+
+#define mtc0_tlbw_hazard() \
+ __asm__ __volatile__( \
+ ".set\tmips32\n\t" \
+ "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
+ ".set\tmips0")
+
+#define tlbw_use_hazard() \
__asm__ __volatile__( \
".set\tmips32\n\t" \
- "ssnop; ssnop; ssnop; ssnop\n\t" \
+ "_ssnop; _ssnop; _ssnop; _ssnop\n\t" \
".set\tmips0")
#else
-#define rm9000_tlb_hazard() do { } while (0)
+
+/*
+ * Overkill warning ...
+ */
+#define mtc0_tlbw_hazard() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
+#define tlbw_use_hazard() \
+ __asm__ __volatile__( \
+ ".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t")
+
#endif
+/*
+ * mtc0->mfc0 hazard
+ * The 24K has a 2 cycle mtc0/mfc0 execution hazard.
+ * It is a MIPS32R2 processor so ehb will clear the hazard.
+ */
+
+#ifdef CONFIG_CPU_MIPSR2
+/*
+ * Use a macro for ehb unless explicit support for MIPSR2 is enabled
+ */
+__asm__(
+ " .macro ehb \n\t"
+ " sll $0, $0, 3 \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_enable_hazard \n\t"
+ " ehb \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_disable_hazard \n\t"
+ " ehb \n\t"
+ " .endm");
+
+#define irq_enable_hazard() \
+ __asm__ __volatile__( \
+ "ehb\t\t\t\t# irq_enable_hazard")
+
+#define irq_disable_hazard() \
+ __asm__ __volatile__( \
+ "ehb\t\t\t\t# irq_disable_hazard")
+
+#elif defined(CONFIG_CPU_R10000)
+
+/*
+ * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
+ */
+
+__asm__(
+ " .macro\tirq_enable_hazard \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_disable_hazard \n\t"
+ " .endm");
+
+#define irq_enable_hazard() do { } while (0)
+#define irq_disable_hazard() do { } while (0)
+
+#else
+
+/*
+ * Default for classic MIPS processors. Assume worst case hazards but don't
+ * care about the irq_enable_hazard - sooner or later the hardware will
+ * enable it and we don't care when exactly.
+ */
+
+__asm__(
+ " .macro _ssnop \n\t"
+ " sll $0, $2, 1 \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " # \n\t"
+ " # There is a hazard but we do not care \n\t"
+ " # \n\t"
+ " .macro\tirq_enable_hazard \n\t"
+ " .endm \n\t"
+ " \n\t"
+ " .macro\tirq_disable_hazard \n\t"
+ " _ssnop; _ssnop; _ssnop \n\t"
+ " .endm");
+
+#define irq_enable_hazard() do { } while (0)
+#define irq_disable_hazard() \
+ __asm__ __volatile__( \
+ "_ssnop; _ssnop; _ssnop;\t\t# irq_disable_hazard")
+
#endif
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_HAZARDS_H */
Index: linux-2.4.35.4/include/asm-mips64/ide.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/ide.h
+++ linux-2.4.35.4/include/asm-mips64/ide.h
@@ -32,12 +32,12 @@ struct ide_ops {
extern struct ide_ops *ide_ops;
-static __inline__ int ide_default_irq(ide_ioreg_t base)
+static inline int ide_default_irq(ide_ioreg_t base)
{
return ide_ops->ide_default_irq(base);
}
-static __inline__ ide_ioreg_t ide_default_io_base(int index)
+static inline ide_ioreg_t ide_default_io_base(int index)
{
return ide_ops->ide_default_io_base(index);
}
@@ -48,7 +48,7 @@ static inline void ide_init_hwif_ports(h
ide_ops->ide_init_hwif_ports(hw, data_port, ctrl_port, irq);
}
-static __inline__ void ide_init_default_hwifs(void)
+static inline void ide_init_default_hwifs(void)
{
#ifndef CONFIG_BLK_DEV_IDEPCI
hw_regs_t hw;
@@ -68,7 +68,89 @@ static __inline__ void ide_init_default_
#define ide_ack_intr(hwif) ((hwif)->hw.ack_intr ? (hwif)->hw.ack_intr(hwif) : 1)
#endif
-#include <asm-generic/ide_iops.h>
+/* MIPS port and memory-mapped I/O string operations. */
+
+static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
+{
+ if (cpu_has_dc_aliases) {
+ unsigned long end = addr + size;
+ for (; addr < end; addr += PAGE_SIZE)
+ flush_dcache_page(virt_to_page(addr));
+ }
+}
+
+static inline void __ide_insw(unsigned long port, void *addr,
+ unsigned int count)
+{
+ insw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
+{
+ insl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_outsw(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsw(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 2);
+}
+
+static inline void __ide_outsl(unsigned long port, const void *addr,
+ unsigned long count)
+{
+ outsl(port, addr, count);
+ __ide_flush_dcache_range((unsigned long)addr, count * 4);
+}
+
+static inline void __ide_mm_insw(unsigned long port, void *addr, u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ *(u16 *)addr = readw(port);
+ addr += 2;
+ }
+ __ide_flush_dcache_range(start, count * 2);
+}
+
+static inline void __ide_mm_insl(unsigned long port, void *addr, u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ *(u32 *)addr = readl(port);
+ addr += 4;
+ }
+ __ide_flush_dcache_range(start, count * 4);
+}
+
+static inline void __ide_mm_outsw(unsigned long port, const void *addr,
+ u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ writew(*(u16 *)addr, port);
+ addr += 2;
+ }
+ __ide_flush_dcache_range(start, count * 2);
+}
+
+static inline void __ide_mm_outsl(unsigned long port, const void *addr,
+ u32 count)
+{
+ unsigned long start = (unsigned long) addr;
+
+ while (count--) {
+ writel(*(u32 *)addr, port);
+ addr += 4;
+ }
+ __ide_flush_dcache_range(start, count * 4);
+}
#endif /* __KERNEL__ */
Index: linux-2.4.35.4/include/asm-mips64/io.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/io.h
+++ linux-2.4.35.4/include/asm-mips64/io.h
@@ -414,7 +414,8 @@ static inline unsigned int inl_p(unsigne
return __ioswab32(__val);
}
-static inline void __outsb(unsigned long port, void *addr, unsigned int count)
+static inline void __outsb(unsigned long port, const void *addr,
+ unsigned int count)
{
while (count--) {
outb(*(u8 *)addr, port);
@@ -430,7 +431,8 @@ static inline void __insb(unsigned long
}
}
-static inline void __outsw(unsigned long port, void *addr, unsigned int count)
+static inline void __outsw(unsigned long port, const void *addr,
+ unsigned int count)
{
while (count--) {
outw(*(u16 *)addr, port);
@@ -446,7 +448,8 @@ static inline void __insw(unsigned long
}
}
-static inline void __outsl(unsigned long port, void *addr, unsigned int count)
+static inline void __outsl(unsigned long port, const void *addr,
+ unsigned int count)
{
while (count--) {
outl(*(u32 *)addr, port);
Index: linux-2.4.35.4/include/asm-mips64/mipsregs.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/mipsregs.h
+++ linux-2.4.35.4/include/asm-mips64/mipsregs.h
@@ -757,10 +757,18 @@ do { \
#define read_c0_config1() __read_32bit_c0_register($16, 1)
#define read_c0_config2() __read_32bit_c0_register($16, 2)
#define read_c0_config3() __read_32bit_c0_register($16, 3)
+#define read_c0_config4() __read_32bit_c0_register($16, 4)
+#define read_c0_config5() __read_32bit_c0_register($16, 5)
+#define read_c0_config6() __read_32bit_c0_register($16, 6)
+#define read_c0_config7() __read_32bit_c0_register($16, 7)
#define write_c0_config(val) __write_32bit_c0_register($16, 0, val)
#define write_c0_config1(val) __write_32bit_c0_register($16, 1, val)
#define write_c0_config2(val) __write_32bit_c0_register($16, 2, val)
#define write_c0_config3(val) __write_32bit_c0_register($16, 3, val)
+#define write_c0_config4(val) __write_32bit_c0_register($16, 4, val)
+#define write_c0_config5(val) __write_32bit_c0_register($16, 5, val)
+#define write_c0_config6(val) __write_32bit_c0_register($16, 6, val)
+#define write_c0_config7(val) __write_32bit_c0_register($16, 7, val)
/*
* The WatchLo register. There may be upto 8 of them.
@@ -856,42 +864,34 @@ do { \
*/
static inline void tlb_probe(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbp\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
static inline void tlb_read(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbr\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
static inline void tlb_write_indexed(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbwi\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
static inline void tlb_write_random(void)
{
- rm9000_tlb_hazard();
__asm__ __volatile__(
".set noreorder\n\t"
"tlbwr\n\t"
".set reorder");
- rm9000_tlb_hazard();
}
/*
Index: linux-2.4.35.4/include/asm-mips64/reg.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/reg.h
+++ linux-2.4.35.4/include/asm-mips64/reg.h
@@ -46,6 +46,9 @@
/*
* k0/k1 unsaved
*/
+#define EF_REG26 26
+#define EF_REG27 27
+
#define EF_REG28 28
#define EF_REG29 29
#define EF_REG30 30
Index: linux-2.4.35.4/include/asm-mips64/sgi/hpc3.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/sgi/hpc3.h
+++ linux-2.4.35.4/include/asm-mips64/sgi/hpc3.h
@@ -128,26 +128,26 @@ struct hpc3_ethregs {
volatile u32 rx_gfptr; /* current GIO fifo ptr */
volatile u32 rx_dfptr; /* current device fifo ptr */
u32 _unused1; /* padding */
- volatile u32 rx_reset; /* reset register */
-#define HPC3_ERXRST_CRESET 0x1 /* Reset dma channel and external controller */
-#define HPC3_ERXRST_CLRIRQ 0x2 /* Clear channel interrupt */
-#define HPC3_ERXRST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
-
- volatile u32 rx_dconfig; /* DMA configuration register */
-#define HPC3_ERXDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
-#define HPC3_ERXDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
-#define HPC3_ERXDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
-#define HPC3_ERXDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
-#define HPC3_ERXDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
-#define HPC3_ERXDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
-#define HPC3_ERXDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
-#define HPC3_ERXDCFG_PTO 0x30000 /* Programmed timeout value for above two */
-
- volatile u32 rx_pconfig; /* PIO configuration register */
-#define HPC3_ERXPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
-#define HPC3_ERXPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
-#define HPC3_ERXPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_ERXPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
+ volatile u32 reset; /* reset register */
+#define HPC3_ERST_CRESET 0x1 /* Reset dma channel and external controller */
+#define HPC3_ERST_CLRIRQ 0x2 /* Clear channel interrupt */
+#define HPC3_ERST_LBACK 0x4 /* Enable diagnostic loopback mode of Seeq8003 */
+
+ volatile u32 dconfig; /* DMA configuration register */
+#define HPC3_EDCFG_D1 0x0000f /* Cycles to spend in D1 state for PIO */
+#define HPC3_EDCFG_D2 0x000f0 /* Cycles to spend in D2 state for PIO */
+#define HPC3_EDCFG_D3 0x00f00 /* Cycles to spend in D3 state for PIO */
+#define HPC3_EDCFG_WCTRL 0x01000 /* Enable writes of desc into ex ctrl port */
+#define HPC3_EDCFG_FRXDC 0x02000 /* Clear eop stat bits upon rxdc, hw seeq fix */
+#define HPC3_EDCFG_FEOP 0x04000 /* Bad packet marker timeout enable */
+#define HPC3_EDCFG_FIRQ 0x08000 /* Another bad packet timeout enable */
+#define HPC3_EDCFG_PTO 0x30000 /* Programmed timeout value for above two */
+
+ volatile u32 pconfig; /* PIO configuration register */
+#define HPC3_EPCFG_P1 0x000f /* Cycles to spend in P1 state for PIO */
+#define HPC3_EPCFG_P2 0x00f0 /* Cycles to spend in P2 state for PIO */
+#define HPC3_EPCFG_P3 0x0f00 /* Cycles to spend in P3 state for PIO */
+#define HPC3_EPCFG_TST 0x1000 /* Diagnistic ram test feature bit */
u32 _unused2[0x1000/4 - 8]; /* padding */
@@ -221,7 +221,7 @@ struct hpc3_regs {
#define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */
u32 _unused1[0x14000/4 - 5]; /* padding */
-
+
/* Now direct PIO per-HPC3 peripheral access to external regs. */
volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */
u32 _unused2[0x7c00/4];
@@ -304,7 +304,7 @@ struct hpc3_regs {
volatile u32 bbram[8192-50-14]; /* Battery backed ram */
};
-/*
+/*
* It is possible to have two HPC3's within the address space on
* one machine, though only having one is more likely on an Indy.
*/
Index: linux-2.4.35.4/include/asm-mips64/sn/nmi.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/sn/nmi.h
+++ linux-2.4.35.4/include/asm-mips64/sn/nmi.h
@@ -8,7 +8,7 @@
#ifndef __ASM_SN_NMI_H
#define __ASM_SN_NMI_H
-#ident "$Revision: 1.2.4.2 $"
+#ident "$Revision: 1.2.4.1 $"
#include <asm/sn/addrs.h>
Index: linux-2.4.35.4/include/asm-mips64/unistd.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-mips64/unistd.h
+++ linux-2.4.35.4/include/asm-mips64/unistd.h
@@ -760,7 +760,7 @@ type name(void) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
/*
@@ -788,7 +788,7 @@ type name(atype a) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall2(type,name,atype,a,btype,b) \
@@ -813,7 +813,7 @@ type name(atype a, btype b) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall3(type,name,atype,a,btype,b,ctype,c) \
@@ -839,7 +839,7 @@ type name(atype a, btype b, ctype c) \
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
@@ -865,7 +865,7 @@ type name(atype a, btype b, ctype c, dty
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
@@ -902,7 +902,7 @@ type name(atype a, btype b, ctype c, dty
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
@@ -935,7 +935,7 @@ type name(atype a, btype b, ctype c, dty
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#endif /* (_MIPS_SIM == _MIPS_SIM_ABI32) */
@@ -966,7 +966,7 @@ type name (atype a,btype b,ctype c,dtype
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#define _syscall6(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e,ftype,f) \
@@ -995,7 +995,7 @@ type name (atype a,btype b,ctype c,dtype
if (__a3 == 0) \
return (type) __v0; \
errno = __v0; \
- return -1; \
+ return (type)-1; \
}
#endif /* (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64) */
Index: linux-2.4.35.4/include/asm-ppc/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-ppc/param.h
+++ linux-2.4.35.4/include/asm-ppc/param.h
@@ -3,6 +3,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 4096
Index: linux-2.4.35.4/include/asm-s390/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-s390/param.h
+++ linux-2.4.35.4/include/asm-s390/param.h
@@ -11,6 +11,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 4096
Index: linux-2.4.35.4/include/asm-sh/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-sh/param.h
+++ linux-2.4.35.4/include/asm-sh/param.h
@@ -3,6 +3,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 4096
Index: linux-2.4.35.4/include/asm-sparc/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-sparc/param.h
+++ linux-2.4.35.4/include/asm-sparc/param.h
@@ -4,6 +4,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
Index: linux-2.4.35.4/include/asm-sparc64/param.h
===================================================================
--- linux-2.4.35.4.orig/include/asm-sparc64/param.h
+++ linux-2.4.35.4/include/asm-sparc64/param.h
@@ -4,6 +4,9 @@
#ifndef HZ
#define HZ 100
+#ifdef __KERNEL__
+#define hz_to_std(a) (a)
+#endif
#endif
#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
Index: linux-2.4.35.4/include/linux/i2c-algo-au1550.h
===================================================================
--- /dev/null
+++ linux-2.4.35.4/include/linux/i2c-algo-au1550.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef I2C_ALGO_AU1550_H
+#define I2C_ALGO_AU1550_H 1
+
+struct i2c_algo_au1550_data {
+ u32 psc_base;
+ int xfer_timeout;
+ int ack_timeout;
+};
+
+int i2c_au1550_add_bus(struct i2c_adapter *);
+int i2c_au1550_del_bus(struct i2c_adapter *);
+
+#endif /* I2C_ALGO_AU1550_H */
Index: linux-2.4.35.4/include/linux/i2c-id.h
===================================================================
--- linux-2.4.35.4.orig/include/linux/i2c-id.h
+++ linux-2.4.35.4/include/linux/i2c-id.h
@@ -155,6 +155,8 @@
#define I2C_ALGO_SIBYTE 0x150000 /* Broadcom SiByte SOCs */
#define I2C_ALGO_SGI 0x160000 /* SGI algorithm */
+#define I2C_ALGO_AU1550 0x140000 /* Alchemy Au1550 PSC */
+
#define I2C_ALGO_EXP 0x800000 /* experimental */
#define I2C_ALGO_MASK 0xff0000 /* Mask for algorithms */
@@ -203,6 +205,9 @@
#define I2C_HW_SGI_VINO 0x00
#define I2C_HW_SGI_MACE 0x01
+/* --- Au1550 PSC adapters */
+#define I2C_HW_AU1550_PSC 0x00
+
/* --- SMBus only adapters */
#define I2C_HW_SMBUS_PIIX4 0x00
#define I2C_HW_SMBUS_ALI15X3 0x01
Index: linux-2.4.35.4/include/linux/sched.h
===================================================================
--- linux-2.4.35.4.orig/include/linux/sched.h
+++ linux-2.4.35.4/include/linux/sched.h
@@ -617,6 +617,10 @@ asmlinkage long sys_wait4(pid_t pid,unsi
extern int in_group_p(gid_t);
extern int in_egroup_p(gid_t);
+extern ATTRIB_NORET void cpu_idle(void);
+
+extern void release_task(struct task_struct * p);
+
extern void proc_caches_init(void);
extern void flush_signals(struct task_struct *);
extern void flush_signal_handlers(struct task_struct *);
Index: linux-2.4.35.4/include/linux/serial.h
===================================================================
--- linux-2.4.35.4.orig/include/linux/serial.h
+++ linux-2.4.35.4/include/linux/serial.h
@@ -75,7 +75,8 @@ struct serial_struct {
#define PORT_16654 11
#define PORT_16850 12
#define PORT_RSA 13 /* RSA-DV II/S card */
-#define PORT_MAX 13
+#define PORT_SB1250 14
+#define PORT_MAX 14
#define SERIAL_IO_PORT 0
#define SERIAL_IO_HUB6 1
Index: linux-2.4.35.4/include/linux/swap.h
===================================================================
--- linux-2.4.35.4.orig/include/linux/swap.h
+++ linux-2.4.35.4/include/linux/swap.h
@@ -1,6 +1,12 @@
#ifndef _LINUX_SWAP_H
#define _LINUX_SWAP_H
+#include <linux/config.h>
+
+#define MAX_SWAPFILES 32
+
+#ifdef __KERNEL__
+
#include <linux/spinlock.h>
#include <asm/page.h>
@@ -8,8 +14,6 @@
#define SWAP_FLAG_PRIO_MASK 0x7fff
#define SWAP_FLAG_PRIO_SHIFT 0
-#define MAX_SWAPFILES 32
-
/*
* Magic header for a swap area. The first part of the union is
* what the swap magic looks like for the old (limited to 128MB)
@@ -39,8 +43,6 @@ union swap_header {
} info;
};
-#ifdef __KERNEL__
-
/*
* Max bad pages in the new format..
*/
Index: linux-2.4.35.4/include/video/newport.h
===================================================================
--- linux-2.4.35.4.orig/include/video/newport.h
+++ linux-2.4.35.4/include/video/newport.h
@@ -291,8 +291,6 @@ struct newport_regs {
unsigned int _unused2[0x1ef];
struct newport_cregs cgo;
};
-extern struct newport_regs *npregs;
-
typedef struct {
unsigned int drawmode1;
@@ -450,38 +448,26 @@ static __inline__ void newport_cmap_setr
/* Miscellaneous NEWPORT routines. */
#define BUSY_TIMEOUT 100000
-static __inline__ int newport_wait(void)
+static __inline__ int newport_wait(struct newport_regs *regs)
{
- int i = 0;
+ int t = BUSY_TIMEOUT;
- while(i < BUSY_TIMEOUT)
- if(!(npregs->cset.status & NPORT_STAT_GBUSY))
+ while (t--)
+ if (!(regs->cset.status & NPORT_STAT_GBUSY))
break;
- if(i == BUSY_TIMEOUT)
- return 1;
- return 0;
+ return !t;
}
-static __inline__ int newport_bfwait(void)
+static __inline__ int newport_bfwait(struct newport_regs *regs)
{
- int i = 0;
+ int t = BUSY_TIMEOUT;
- while(i < BUSY_TIMEOUT)
- if(!(npregs->cset.status & NPORT_STAT_BBUSY))
+ while (t--)
+ if(!(regs->cset.status & NPORT_STAT_BBUSY))
break;
- if(i == BUSY_TIMEOUT)
- return 1;
- return 0;
+ return !t;
}
-/* newport.c and cons_newport.c routines */
-extern struct graphics_ops *newport_probe (int, const char **);
-
-void newport_save (void *);
-void newport_restore (void *);
-void newport_reset (void);
-int newport_ioctl (int card, int cmd, unsigned long arg);
-
/*
* DCBMODE register defines:
*/
@@ -564,7 +550,7 @@ xmap9FIFOWait (struct newport_regs *rex)
{
rex->set.dcbmode = DCB_XMAP0 | XM9_CRS_FIFO_AVAIL |
DCB_DATAWIDTH_1 | R_DCB_XMAP9_PROTOCOL;
- newport_bfwait ();
+ newport_bfwait (rex);
while ((rex->set.dcbdata0.bybytes.b3 & 3) != XM9_FIFO_EMPTY)
;
Index: linux-2.4.35.4/init/main.c
===================================================================
--- linux-2.4.35.4.orig/init/main.c
+++ linux-2.4.35.4/init/main.c
@@ -296,7 +296,6 @@ static void __init parse_options(char *l
extern void setup_arch(char **);
-extern void cpu_idle(void);
unsigned long wait_init_idle;
Index: linux-2.4.35.4/kernel/exit.c
===================================================================
--- linux-2.4.35.4.orig/kernel/exit.c
+++ linux-2.4.35.4/kernel/exit.c
@@ -26,7 +26,7 @@ extern struct task_struct *child_reaper;
int getrusage(struct task_struct *, int, struct rusage *);
-static void release_task(struct task_struct * p)
+void release_task(struct task_struct * p)
{
if (p != current) {
#ifdef CONFIG_SMP
Index: linux-2.4.35.4/kernel/signal.c
===================================================================
--- linux-2.4.35.4.orig/kernel/signal.c
+++ linux-2.4.35.4/kernel/signal.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/sched.h>
+#include <asm/param.h>
#include <asm/uaccess.h>
/*
@@ -28,6 +29,14 @@
#define SIG_SLAB_DEBUG 0
#endif
+#define DEBUG_SIG 0
+
+#if DEBUG_SIG
+#define SIG_SLAB_DEBUG (SLAB_DEBUG_FREE | SLAB_RED_ZONE /* | SLAB_POISON */)
+#else
+#define SIG_SLAB_DEBUG 0
+#endif
+
static kmem_cache_t *sigqueue_cachep;
atomic_t nr_queued_signals;
@@ -270,6 +279,11 @@ printk("SIG dequeue (%s:%d): %d ", curre
signal_pending(current));
#endif
+#if DEBUG_SIG
+printk("SIG dequeue (%s:%d): %d ", current->comm, current->pid,
+ signal_pending(current));
+#endif
+
sig = next_signal(current, mask);
if (sig) {
if (current->notifier) {
@@ -293,6 +307,10 @@ printk("SIG dequeue (%s:%d): %d ", curre
printk(" %d -> %d\n", signal_pending(current), sig);
#endif
+#if DEBUG_SIG
+printk(" %d -> %d\n", signal_pending(current), sig);
+#endif
+
return sig;
}
@@ -540,6 +558,11 @@ send_sig_info(int sig, struct siginfo *i
printk("SIG queue (%s:%d): %d ", t->comm, t->pid, sig);
#endif
+
+#if DEBUG_SIG
+printk("SIG queue (%s:%d): %d ", t->comm, t->pid, sig);
+#endif
+
ret = -EINVAL;
if (sig < 0 || sig > _NSIG)
goto out_nolock;
@@ -778,8 +801,8 @@ void do_notify_parent(struct task_struct
info.si_uid = tsk->uid;
/* FIXME: find out whether or not this is supposed to be c*time. */
- info.si_utime = tsk->times.tms_utime;
- info.si_stime = tsk->times.tms_stime;
+ info.si_utime = hz_to_std(tsk->times.tms_utime);
+ info.si_stime = hz_to_std(tsk->times.tms_stime);
status = tsk->exit_code & 0x7f;
why = SI_KERNEL; /* shouldn't happen */
Index: linux-2.4.35.4/kernel/sys.c
===================================================================
--- linux-2.4.35.4.orig/kernel/sys.c
+++ linux-2.4.35.4/kernel/sys.c
@@ -801,16 +801,23 @@ asmlinkage long sys_setfsgid(gid_t gid)
asmlinkage long sys_times(struct tms * tbuf)
{
+ struct tms temp;
+
/*
* In the SMP world we might just be unlucky and have one of
* the times increment as we use it. Since the value is an
* atomically safe type this is just fine. Conceptually its
* as if the syscall took an instant longer to occur.
*/
- if (tbuf)
- if (copy_to_user(tbuf, &current->times, sizeof(struct tms)))
+ if (tbuf) {
+ temp.tms_utime = hz_to_std(current->times.tms_utime);
+ temp.tms_stime = hz_to_std(current->times.tms_stime);
+ temp.tms_cutime = hz_to_std(current->times.tms_cutime);
+ temp.tms_cstime = hz_to_std(current->times.tms_cstime);
+ if (copy_to_user(tbuf, &temp, sizeof(struct tms)))
return -EFAULT;
- return jiffies;
+ }
+ return hz_to_std(jiffies);
}
/*
Index: linux-2.4.35.4/lib/Makefile
===================================================================
--- linux-2.4.35.4.orig/lib/Makefile
+++ linux-2.4.35.4/lib/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CRC32) += crc32.o
subdir-$(CONFIG_ZLIB_INFLATE) += zlib_inflate
subdir-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate
+-include $(TOPDIR)/arch/$(ARCH)/Makefile.lib
include $(TOPDIR)/drivers/net/Makefile.lib
include $(TOPDIR)/drivers/usb/Makefile.lib
include $(TOPDIR)/drivers/bluetooth/Makefile.lib
Index: linux-2.4.35.4/Makefile
===================================================================
--- linux-2.4.35.4.orig/Makefile
+++ linux-2.4.35.4/Makefile
@@ -469,10 +469,11 @@ mrproper: clean archmrproper
$(MAKE) -C Documentation/DocBook mrproper
distclean: mrproper
- rm -f core `find . \( -not -type d \) -and \
- \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
- -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' -o -name '.SUMS' -o -size 0 \) -type f -print` TAGS tags
+ find . \( -not -type d \) -and \
+ \( -name core -o -name '*.orig' -o -name '*.rej' \
+ -o -name '*~' -o -name '*.bak' -o -name '#*#' \
+ -o -name '.*.rej' -o -name '.SUMS' -o -size 0 \
+ -o -name TAGS -o -name tags \) -print | env -i xargs rm -f
backup: mrproper
cd .. && tar cf - linux/ | gzip -9 > backup.gz
@@ -499,7 +500,7 @@ mandocs:
$(MAKE) -C Documentation/DocBook man
sums:
- find . -type f -print | sort | xargs sum > .SUMS
+ find . -type f -print | sort | env -i xargs sum > .SUMS
dep-files: scripts/mkdep archdep include/linux/version.h
rm -f .depend .hdepend