openwrt/target/linux/ath79/image
Piotr Dymacz db91418766 ath79: add support for TP-Link RE350K v1
TP-Link RE350K v1 (FCC ID: TE7RE350K) is a wall-plug AC1200 Wi-Fi range
extender with 'Kasa Smart' support. Device is based on Qualcomm/Atheros
QCA9558 + QCA9882 + AR8035 platform and is available only on US market.

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of flash (SPI NOR)
- 1x 1 Gbps Ethernet (AR8035)
- 2T2R 2.4 GHz (QCA9558), with ext. PA (SE2565T) and LNA (SKY65971-11)
- 2T2R 5 GHz (QCA9882), with ext. PA (SE5003L1-R) and LNA (SKY65981-11)
- 2x U.FL connector on PCB
- 2x dual-band PCB antennas
- 1x LED, 2x dual-color LED (all driven by GPIO)
- 3x button (app config, led, reset)
- 1x mechanical on/off slide switch
- 1x UART (4-pin, 2.54 mm pitch) header on PCB
- 1x JTAG (8-pin, 1.27 mm pitch) header on PCB

Flash instruction:
Use 'factory' image directly in vendor GUI (default IP: 192.168.0.254,
default credentials: admin/admin).

Warning:
This device does not include any kind of recovery mechanism in U-Boot.

Vendor firmware access:
You can access vendor firmware over serial (RX line requires jumper
resistor in R306 place, near XTAL) with: root/sohoadmin credentials.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-03-11 22:00:26 +01:00
..
lzma-loader ath79: lzma-loader: sync with ar71xx target 2018-06-06 22:25:53 +02:00
Makefile ath79: add support for Buffalo BHR-4GRV2 2018-08-09 18:44:57 +02:00
common-buffalo.mk ath79: add hwver parameter to buffalo-tag 2018-10-07 15:44:19 +02:00
common-netgear.mk ath79: mark netgear variables as device specific 2018-08-08 08:11:11 +02:00
common-tp-link.mk ath79: proper indentation in image/common-tp-link.mk 2019-02-14 16:56:14 +01:00
generic-tp-link.mk ath79: add support for TP-Link RE350K v1 2019-03-11 22:00:26 +01:00
generic-ubnt.mk ath79: Add support for Ubiquiti Nanostation M (XW) 2019-03-05 03:15:52 +01:00
generic.mk ath79: add support for YunCore A770 2019-03-09 16:31:17 +01:00
nand.mk ath79: fix boardname of GL.iNet GL-AR300M 2018-12-31 14:24:21 +01:00
tiny-netgear.mk ath79: remove duplicate image build variables 2018-12-06 13:28:22 +01:00
tiny-tp-link.mk ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
tiny.mk ath79: modify mtd partitions for Buffalo BHR-4GRV2 2018-11-26 12:28:17 +01:00