openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli 915969ff2c kernel: refresh patches against 3.9-rc6 Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36297		2013-04-09 16:16:20 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	Enable native IPv6 support by default	2013-04-09 08:02:55 +00:00
package	qos-scripts: add queue length and quantum limit, suggested by dtaht	2013-04-09 14:59:10 +00:00
scripts	buildroot: allow enabling MIPS16 user-space build	2013-04-05 12:36:12 +00:00
target	kernel: refresh patches against 3.9-rc6	2013-04-09 16:16:20 +00:00
toolchain	gcc: remove the bogus CONFIG_TLS_SUPPORT symbol - TLS support is required by libc.	2013-04-07 10:11:41 +00:00
tools	Add Netgear WNCE2001 (OF version)	2013-04-09 14:19:33 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	buildroot: enable software floating point for MIPS64 targets	2013-04-09 14:36:09 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README	build: BSD compile fixes	2013-03-07 17:32:29 +00:00
feeds.conf.default	feeds.conf.default: switch LuCI feed to nbd.name git mirror	2013-03-25 11:12:57 +00:00
rules.mk	toolchain: allow choosing the MIPS64 user-land ABI	2013-04-05 12:36:23 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org