openwrt/target/linux/malta
Yousong Zhou 12cdf2bfc2 malta: enable be64 and le64 subtargets
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-08-15 15:32:36 +02:00
..
base-files/etc image / basefiles: make console password configurable 2016-04-18 21:53:07 +02:00
be target: globally remove ARCH_PACKAGES overrides 2016-04-17 19:55:09 +02:00
be64 malta: enable be64 and le64 subtargets 2016-08-15 15:32:36 +02:00
image
le target: globally remove ARCH_PACKAGES overrides 2016-04-17 19:55:09 +02:00
le64 malta: enable be64 and le64 subtargets 2016-08-15 15:32:36 +02:00
Makefile malta: enable be64 and le64 subtargets 2016-08-15 15:32:36 +02:00
README
config-4.4 malta: enable be64 and le64 subtargets 2016-08-15 15:32:36 +02:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the little-endian image:
qemu-system-mipsel -kernel bin/malta/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the big-endian image:
qemu-system-mips -kernel bin/malta/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.