openwrt/target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch

80 lines
2.0 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -2163,6 +2163,60 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata vr3026e_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+ { .offset = 99, .value = 0xfab0 },
+ { .offset = 113, .value = 0xfed1 },
+ { .offset = 114, .value = 0x1609 },
+ { .offset = 115, .value = 0xfad9 },
+};
+
+static struct board_info __initdata board_VR3026e = {
+ .name = "96368MT-1341N1",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43222,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = vr3026e_fixups,
+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups),
+ },
+};
+
static struct b53_platform_data WAP5813n_b53_pdata = {
.alias = "eth0",
};
@@ -2467,6 +2521,7 @@ static const struct board_info __initcon
&board_P870HW51A_V2,
&board_VR3025u,
&board_VR3025un,
+ &board_VR3026e,
&board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
@@ -2567,6 +2622,7 @@ static struct of_device_id const bcm963x
{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
{ .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
{ .compatible = "huawei,hg655b", .data = &board_HG655b, },
{ .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },