mirror of https://github.com/hak5/openwrt.git
213 lines
5.7 KiB
Diff
213 lines
5.7 KiB
Diff
--- a/arch/mips/ath25/Kconfig
|
|
+++ b/arch/mips/ath25/Kconfig
|
|
@@ -1,6 +1,7 @@
|
|
config SOC_AR5312
|
|
bool "Atheros AR5312/AR2312+ SoC support"
|
|
depends on ATH25
|
|
+ select GPIO_AR5312
|
|
default y
|
|
|
|
config SOC_AR2315
|
|
--- a/arch/mips/ath25/ar5312.c
|
|
+++ b/arch/mips/ath25/ar5312.c
|
|
@@ -22,6 +22,7 @@
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/reboot.h>
|
|
+#include <linux/gpio.h>
|
|
#include <asm/bootinfo.h>
|
|
#include <asm/reboot.h>
|
|
#include <asm/time.h>
|
|
@@ -180,6 +181,22 @@ static struct platform_device ar5312_phy
|
|
.num_resources = 1,
|
|
};
|
|
|
|
+static struct resource ar5312_gpio_res[] = {
|
|
+ {
|
|
+ .name = "ar5312-gpio",
|
|
+ .flags = IORESOURCE_MEM,
|
|
+ .start = AR5312_GPIO_BASE,
|
|
+ .end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device ar5312_gpio = {
|
|
+ .name = "ar5312-gpio",
|
|
+ .id = -1,
|
|
+ .resource = ar5312_gpio_res,
|
|
+ .num_resources = ARRAY_SIZE(ar5312_gpio_res),
|
|
+};
|
|
+
|
|
static void __init ar5312_flash_init(void)
|
|
{
|
|
void __iomem *flashctl_base;
|
|
@@ -247,6 +264,8 @@ void __init ar5312_init_devices(void)
|
|
|
|
platform_device_register(&ar5312_physmap_flash);
|
|
|
|
+ platform_device_register(&ar5312_gpio);
|
|
+
|
|
switch (ath25_soc) {
|
|
case ATH25_SOC_AR5312:
|
|
if (!ath25_board.radio)
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -142,6 +142,13 @@ config GPIO_BRCMSTB
|
|
help
|
|
Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.
|
|
|
|
+config GPIO_AR5312
|
|
+ bool "AR5312 SoC GPIO support"
|
|
+ default y if SOC_AR5312
|
|
+ depends on SOC_AR5312
|
|
+ help
|
|
+ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs.
|
|
+
|
|
config GPIO_CLPS711X
|
|
tristate "CLPS711X GPIO support"
|
|
depends on ARCH_CLPS711X || COMPILE_TEST
|
|
--- a/drivers/gpio/Makefile
|
|
+++ b/drivers/gpio/Makefile
|
|
@@ -21,6 +21,7 @@ obj-$(CONFIG_GPIO_ADP5588) += gpio-adp55
|
|
obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
|
|
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
|
|
obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o
|
|
+obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o
|
|
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
|
|
obj-$(CONFIG_ATH79) += gpio-ath79.o
|
|
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
|
|
--- /dev/null
|
|
+++ b/drivers/gpio/gpio-ar5312.c
|
|
@@ -0,0 +1,121 @@
|
|
+/*
|
|
+ * This file is subject to the terms and conditions of the GNU General Public
|
|
+ * License. See the file "COPYING" in the main directory of this archive
|
|
+ * for more details.
|
|
+ *
|
|
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
+ * Copyright (C) 2006 FON Technology, SL.
|
|
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
|
|
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name>
|
|
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/gpio.h>
|
|
+
|
|
+#define DRIVER_NAME "ar5312-gpio"
|
|
+
|
|
+#define AR5312_GPIO_DO 0x00 /* output register */
|
|
+#define AR5312_GPIO_DI 0x04 /* intput register */
|
|
+#define AR5312_GPIO_CR 0x08 /* control register */
|
|
+
|
|
+#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */
|
|
+#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */
|
|
+#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */
|
|
+#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */
|
|
+#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */
|
|
+
|
|
+#define AR5312_GPIO_NUM 8
|
|
+
|
|
+static void __iomem *ar5312_mem;
|
|
+
|
|
+static inline u32 ar5312_gpio_reg_read(unsigned reg)
|
|
+{
|
|
+ return __raw_readl(ar5312_mem + reg);
|
|
+}
|
|
+
|
|
+static inline void ar5312_gpio_reg_write(unsigned reg, u32 val)
|
|
+{
|
|
+ __raw_writel(val, ar5312_mem + reg);
|
|
+}
|
|
+
|
|
+static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
|
|
+{
|
|
+ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val);
|
|
+}
|
|
+
|
|
+static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
|
|
+{
|
|
+ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1;
|
|
+}
|
|
+
|
|
+static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
|
|
+{
|
|
+ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO);
|
|
+
|
|
+ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
|
|
+ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg);
|
|
+}
|
|
+
|
|
+static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
|
|
+{
|
|
+ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
|
|
+{
|
|
+ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0);
|
|
+ ar5312_gpio_set_val(chip, gpio, val);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct gpio_chip ar5312_gpio_chip = {
|
|
+ .label = DRIVER_NAME,
|
|
+ .direction_input = ar5312_gpio_dir_in,
|
|
+ .direction_output = ar5312_gpio_dir_out,
|
|
+ .set = ar5312_gpio_set_val,
|
|
+ .get = ar5312_gpio_get_val,
|
|
+ .base = 0,
|
|
+ .ngpio = AR5312_GPIO_NUM,
|
|
+};
|
|
+
|
|
+static int ar5312_gpio_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct resource *res;
|
|
+ int ret;
|
|
+
|
|
+ if (ar5312_mem)
|
|
+ return -EBUSY;
|
|
+
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ ar5312_mem = devm_ioremap_resource(dev, res);
|
|
+ if (IS_ERR(ar5312_mem))
|
|
+ return PTR_ERR(ar5312_mem);
|
|
+
|
|
+ ar5312_gpio_chip.dev = dev;
|
|
+ ret = gpiochip_add(&ar5312_gpio_chip);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "failed to add gpiochip\n");
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver ar5312_gpio_driver = {
|
|
+ .probe = ar5312_gpio_probe,
|
|
+ .driver = {
|
|
+ .name = DRIVER_NAME,
|
|
+ .owner = THIS_MODULE,
|
|
+ }
|
|
+};
|
|
+
|
|
+static int __init ar5312_gpio_init(void)
|
|
+{
|
|
+ return platform_driver_register(&ar5312_gpio_driver);
|
|
+}
|
|
+subsys_initcall(ar5312_gpio_init);
|
|
--- a/arch/mips/Kconfig
|
|
+++ b/arch/mips/Kconfig
|
|
@@ -118,6 +118,7 @@ config ATH25
|
|
select SYS_SUPPORTS_BIG_ENDIAN
|
|
select SYS_SUPPORTS_32BIT_KERNEL
|
|
select SYS_HAS_EARLY_PRINTK
|
|
+ select ARCH_REQUIRE_GPIOLIB
|
|
help
|
|
Support for Atheros AR231x and Atheros AR531x based boards
|
|
|