mirror of https://github.com/hak5/openwrt.git
92 lines
2.1 KiB
Diff
92 lines
2.1 KiB
Diff
From 3a1689ea752436917c5ce4487527ed6c444630ee Mon Sep 17 00:00:00 2001
|
|
From: Stefan Wahren <stefan.wahren@i2se.com>
|
|
Date: Wed, 16 Nov 2016 17:52:07 +0000
|
|
Subject: [PATCH] ARM: bcm2835: Add names for the RPi Zero GPIO lines
|
|
|
|
This adds the GPIO names for the Raspberry Pi Zero. The GPIO lines
|
|
of the RPi Zero are almost identical to the Model A+ except:
|
|
|
|
* GPIO 35, 38, 40 and 45 are not connected
|
|
* Status LED is active low
|
|
|
|
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
|
|
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
---
|
|
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 65 ++++++++++++++++++++++++++++++++++
|
|
1 file changed, 65 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
|
|
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
|
|
@@ -26,6 +26,71 @@
|
|
};
|
|
|
|
&gpio {
|
|
+ /*
|
|
+ * This is based on the official GPU firmware DT blob.
|
|
+ *
|
|
+ * Legend:
|
|
+ * "NC" = not connected (no rail from the SoC)
|
|
+ * "FOO" = GPIO line named "FOO" on the schematic
|
|
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
|
|
+ */
|
|
+ gpio-line-names = "SDA0",
|
|
+ "SCL0",
|
|
+ "SDA1",
|
|
+ "SCL1",
|
|
+ "GPIO_GCLK",
|
|
+ "GPIO5",
|
|
+ "GPIO6",
|
|
+ "SPI_CE1_N",
|
|
+ "SPI_CE0_N",
|
|
+ "SPI_MISO",
|
|
+ "SPI_MOSI",
|
|
+ "SPI_SCLK",
|
|
+ "GPIO12",
|
|
+ "GPIO13",
|
|
+ /* Serial port */
|
|
+ "TXD0",
|
|
+ "RXD0",
|
|
+ "GPIO16",
|
|
+ "GPIO17",
|
|
+ "GPIO18",
|
|
+ "GPIO19",
|
|
+ "GPIO20",
|
|
+ "GPIO21",
|
|
+ "GPIO22",
|
|
+ "GPIO23",
|
|
+ "GPIO24",
|
|
+ "GPIO25",
|
|
+ "GPIO26",
|
|
+ "GPIO27",
|
|
+ "SDA0",
|
|
+ "SCL0",
|
|
+ "NC", /* GPIO30 */
|
|
+ "NC", /* GPIO31 */
|
|
+ "CAM_GPIO1", /* GPIO32 */
|
|
+ "NC", /* GPIO33 */
|
|
+ "NC", /* GPIO34 */
|
|
+ "NC", /* GPIO35 */
|
|
+ "NC", /* GPIO36 */
|
|
+ "NC", /* GPIO37 */
|
|
+ "NC", /* GPIO38 */
|
|
+ "NC", /* GPIO39 */
|
|
+ "NC", /* GPIO40 */
|
|
+ "CAM_GPIO0", /* GPIO41 */
|
|
+ "NC", /* GPIO42 */
|
|
+ "NC", /* GPIO43 */
|
|
+ "NC", /* GPIO44 */
|
|
+ "NC", /* GPIO45 */
|
|
+ "HDMI_HPD_N",
|
|
+ "STATUS_LED_N",
|
|
+ /* Used by SD Card */
|
|
+ "SD_CLK_R",
|
|
+ "SD_CMD_R",
|
|
+ "SD_DATA0_R",
|
|
+ "SD_DATA1_R",
|
|
+ "SD_DATA2_R",
|
|
+ "SD_DATA3_R";
|
|
+
|
|
pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
|
|
|
|
/* I2S interface */
|