hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
8,403 Commits
5 Branches
29 Tags
202 MiB
C 65.7%
Makefile 15.8%
Shell 7.2%
Roff 5.7%
Perl 1.9%
Other 3.6%
 
 
 
 
 
 
Go to file
Travis Kemen 8894411b60 This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.). 
Changes from Linksys tree:
 - Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
 - Remove bogus 'sierra_device_ids' table, used with above.
 - Changed references to 'sierra_device_ids' back to id_table
 - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
 - Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by:  RB <aoz.syn@gmail.com>

SVN-Revision: 11899
 		2008-07-21 20:40:14 +00:00
docs Document a bit more about IPv6 configuration 2008-07-21 09:58:59 +00:00
include 2.6.26 final is out 2008-07-14 13:58:54 +00:00
package This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com> 2008-07-21 20:36:16 +00:00
scripts generate patched zImage for the Pronghorn, too 2008-07-02 23:25:52 +00:00
target This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.). 2008-07-21 20:40:14 +00:00
toolchain surprise :p 2008-07-21 17:08:14 +00:00
tools lua: Fixed some cross-platform issues for PPC (and probably other architectures) 2008-06-29 11:38:22 +00:00
.gitignore update svn:ignore and .gitignore 2008-06-06 19:04:01 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in adds missing patch for native toolchain 2008-06-10 07:18:41 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile large improvement for parallel builds. works without V=99 now and without warnings. tested with -j on an 2x dual core opteron machine 2008-06-09 15:38:45 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
feeds.conf x-wrt svn repo has moved to http://x-wrt.googlecode.com/svn/trunk/ 2008-06-26 01:43:48 +00:00
rules.mk Native toolchain does not support -fhonour-copts, do not add it to the TARGET_CFLAGS 2008-07-19 16:29:01 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org