openwrt/target/linux/malta
Hauke Mehrtens 403d36ef3d malta: Add support for kernel 4.19
This adds a kernel configuration file for kernel 4.19 on malta.
CONFIG_POWER_RESET_PIIX4_POWEROFF and CONFIG_POWER_RESET_SYSCON were
activated because malta now uses this driver for reboot.

CONFIG_BLK_DEV_SR was also added because it was also added to the kernel
default configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 16:31:40 +01:00
..
base-files/etc image / basefiles: make console password configurable 2016-04-18 21:53:07 +02:00
be malta: upgrade to kernel 4.9 2017-10-15 14:22:01 +02:00
be64 malta: Refresh kernel 4.14 configuration 2019-01-13 16:31:38 +01:00
image treewide: do not use IMG_PREFIX in Image/Prepare 2017-10-26 12:26:25 +02:00
le malta: upgrade to kernel 4.9 2017-10-15 14:22:01 +02:00
le64 malta: Refresh kernel 4.14 configuration 2019-01-13 16:31:38 +01:00
Makefile treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
README malta: fix image prefix names 2018-01-09 10:26:16 +01:00
config-4.14 malta: Refresh kernel 4.14 configuration 2019-01-13 16:31:38 +01:00
config-4.19 malta: Add support for kernel 4.19 2019-01-13 16:31:40 +01:00

README

This Malta target is intended to be used with the Qemu emulator. It can be used
to prototype an OpenWrt firmware for MIPS processors. One could also use it to
troubleshoot MIPS applications without access to real hardware.

To use the images built by OpenWrt with qemu, use the following commands:

For the 32 bit little-endian image:
qemu-system-mipsel -kernel bin/targets/malta/le/openwrt-malta-le-vmlinux-initramfs.elf -nographic -m 256

For the 32 bit big-endian image:
qemu-system-mips -kernel bin/targets/malta/be/openwrt-malta-be-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit little-endian image:
qemu-system-mips64el -kernel bin/targets/malta/le64/openwrt-malta-le64-vmlinux-initramfs.elf -nographic -m 256

For the 64 bit big-endian image:
qemu-system-mips64 -kernel bin/targets/malta/be64/openwrt-malta-be64-vmlinux-initramfs.elf -nographic -m 256

and enjoy the system bootin.