mirror of https://github.com/hak5/openwrt.git
55 lines
1.7 KiB
Diff
55 lines
1.7 KiB
Diff
From 08f15963bc751bc818294c0f75a9aaca299c4052 Mon Sep 17 00:00:00 2001
|
|
From: Abhishek Sahu <absahu@codeaurora.org>
|
|
Date: Mon, 12 Mar 2018 18:44:57 +0530
|
|
Subject: [PATCH 08/13] i2c: qup: use the complete transfer length to choose
|
|
DMA mode
|
|
|
|
Currently each message length in complete transfer is being
|
|
checked for determining DMA mode and if any of the message length
|
|
is less than FIFO length then non DMA mode is being used which
|
|
will increase overhead. DMA can be used for any length and it
|
|
should be determined with complete transfer length. Now, this
|
|
patch selects DMA mode if the total length is greater than FIFO
|
|
length.
|
|
|
|
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
|
|
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
|
|
Reviewed-by: Andy Gross <andy.gross@linaro.org>
|
|
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
---
|
|
drivers/i2c/busses/i2c-qup.c | 13 +++++++------
|
|
1 file changed, 7 insertions(+), 6 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-qup.c
|
|
+++ b/drivers/i2c/busses/i2c-qup.c
|
|
@@ -1300,7 +1300,8 @@ static int qup_i2c_xfer_v2(struct i2c_ad
|
|
int num)
|
|
{
|
|
struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
|
|
- int ret, len, idx = 0;
|
|
+ int ret, idx = 0;
|
|
+ unsigned int total_len = 0;
|
|
|
|
qup->bus_err = 0;
|
|
qup->qup_err = 0;
|
|
@@ -1326,14 +1327,14 @@ static int qup_i2c_xfer_v2(struct i2c_ad
|
|
goto out;
|
|
}
|
|
|
|
- len = (msgs[idx].len > qup->out_fifo_sz) ||
|
|
- (msgs[idx].len > qup->in_fifo_sz);
|
|
-
|
|
- if (is_vmalloc_addr(msgs[idx].buf) || !len)
|
|
+ if (is_vmalloc_addr(msgs[idx].buf))
|
|
break;
|
|
+
|
|
+ total_len += msgs[idx].len;
|
|
}
|
|
|
|
- if (idx == num)
|
|
+ if (idx == num && (total_len > qup->out_fifo_sz ||
|
|
+ total_len > qup->in_fifo_sz))
|
|
qup->use_dma = true;
|
|
}
|
|
|