openwrt

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org

Go to file

Florian Fainelli 871b0d6fed fix SPI accessors SVN-Revision: 14792		2009-03-08 14:20:15 +00:00
docs	allow mac80211 devices to be configured to do 802.11s, requires iw	2009-02-26 14:53:03 +00:00
include	allow uml to access host.mk at DUMP time	2009-03-03 15:45:15 +00:00
package	sysupgrade: install /bin/sleep into ramdisk too and add completition notice (#4747 )	2009-03-08 00:21:25 +00:00
scripts	fix a package metadata parsing bug	2009-03-03 14:03:37 +00:00
target	fix SPI accessors	2009-03-08 14:20:15 +00:00
toolchain	fix powerpc build (works for 2.4 and 2.6)	2009-03-01 11:04:08 +00:00
tools	add dependency (needed for parallel build)	2009-03-01 09:47:05 +00:00
.gitignore	add feeds.conf to .gitignore	2008-09-23 11:06:06 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add the possibility to put the rootfs to another location (usefull to specify one dedicated NFS export share regardless where in the compute farm the build is done)	2009-02-20 10:38:08 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	avoid implicit rules in even more places	2009-03-03 14:16:48 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
feeds.conf.default	Add desktop and xfce feed to feeds.conf.default	2009-01-19 19:46:03 +00:00
rules.mk	replace a few unnecessary $(shell) calls	2009-03-03 14:55:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org