openwrt/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-pinmux...

167 lines
4.4 KiB
Diff

From 806a489c720767f63bf5046c2ccd87ded9549c1c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sat, 16 Mar 2013 00:50:57 +0100
Subject: [PATCH 104/121] MIPS: ralink: add pinmux driver
Add code to setup the pinmux on ralonk SoC. The SoC has a single 32 bit register
for this functionality with simple on/off bits. Building a full featured pinctrl
driver would be overkill.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/Makefile | 2 +-
arch/mips/ralink/common.h | 5 ++-
arch/mips/ralink/of.c | 2 ++
arch/mips/ralink/pinmux.c | 76 +++++++++++++++++++++++++++++++++++++++++++++
arch/mips/ralink/rt305x.c | 6 ++--
5 files changed, 85 insertions(+), 6 deletions(-)
create mode 100644 arch/mips/ralink/pinmux.c
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,7 +6,7 @@
# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
# Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-obj-y := prom.o of.o reset.o clk.o irq.o
+obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -22,9 +22,10 @@ struct ralink_pinmux {
struct ralink_pinmux_grp *mode;
struct ralink_pinmux_grp *uart;
int uart_shift;
+ u32 uart_mask;
void (*wdt_reset)(void);
};
-extern struct ralink_pinmux gpio_pinmux;
+extern struct ralink_pinmux rt_pinmux;
struct ralink_soc_info {
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
@@ -41,4 +42,6 @@ extern void prom_soc_init(struct ralink_
__iomem void *plat_of_remap_node(const char *node);
+void ralink_pinmux(void);
+
#endif /* _RALINK_COMMON_H__ */
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -101,6 +101,8 @@ static int __init plat_of_setup(void)
if (of_platform_populate(NULL, of_ids, NULL, NULL))
panic("failed to populate DT\n");
+ ralink_pinmux();
+
return 0;
}
--- /dev/null
+++ b/arch/mips/ralink/pinmux.c
@@ -0,0 +1,76 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "common.h"
+
+#define SYSC_REG_GPIO_MODE 0x60
+
+static u32 ralink_mux_mask(const char *name, struct ralink_pinmux_grp *grps)
+{
+ for (; grps->name; grps++)
+ if (!strcmp(grps->name, name))
+ return grps->mask;
+
+ return 0;
+}
+
+void ralink_pinmux(void)
+{
+ const __be32 *wdt;
+ struct device_node *np;
+ struct property *prop;
+ const char *uart, *pin;
+ u32 mode = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-sysc");
+ if (!np)
+ return;
+
+ of_property_for_each_string(np, "ralink,gpiomux", prop, pin) {
+ int m = ralink_mux_mask(pin, rt_pinmux.mode);
+ if (m) {
+ mode |= m;
+ pr_debug("pinmux: registered gpiomux \"%s\"\n", pin);
+ } else {
+ pr_err("pinmux: failed to load \"%s\"\n", pin);
+ }
+ }
+
+ of_property_for_each_string(np, "ralink,pinmux", prop, pin) {
+ int m = ralink_mux_mask(pin, rt_pinmux.mode);
+ if (m) {
+ mode &= ~m;
+ pr_debug("pinmux: registered pinmux \"%s\"\n", pin);
+ } else {
+ pr_err("pinmux: failed to load group \"%s\"\n", pin);
+ }
+ }
+
+ of_property_read_string(np, "ralink,uartmux", &uart);
+ if (uart) {
+ int m = ralink_mux_mask(uart, rt_pinmux.uart);
+ mode |= rt_pinmux.uart_mask << rt_pinmux.uart_shift;
+ if (m) {
+ mode &= ~(m << rt_pinmux.uart_shift);
+ pr_debug("pinmux: registered uartmux \"%s\"\n", uart);
+ } else {
+ pr_debug("pinmux: registered uartmux \"gpio\"\n");
+ }
+ }
+
+ wdt = of_get_property(np, "ralink,wdtmux", NULL);
+ if (wdt && *wdt && rt_pinmux.wdt_reset)
+ rt_pinmux.wdt_reset();
+
+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE);
+}
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -97,9 +97,6 @@ struct ralink_pinmux_grp uart_mux[] = {
.mask = RT305X_GPIO_MODE_GPIO_I2S,
.gpio_first = RT305X_GPIO_7,
.gpio_last = RT305X_GPIO_14,
- }, {
- .name = "gpio",
- .mask = RT305X_GPIO_MODE_GPIO,
}, {0}
};
@@ -114,10 +111,11 @@ void rt305x_wdt_reset(void)
rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
}
-struct ralink_pinmux gpio_pinmux = {
+struct ralink_pinmux rt_pinmux = {
.mode = mode_mux,
.uart = uart_mux,
.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = RT305X_GPIO_MODE_GPIO,
.wdt_reset = rt305x_wdt_reset,
};